Struck up with R3AD_* Queues in SMQ1(Outbound Queue in ECC Side)

Hi ,
I am using CRM Middleware for replicating business partner(BP) from CRM to ECC
and material from ECC to CRM.
BP and Materials are replicating well.
My Issue is,
while checking queues in SMQ1 (Outbound Queue in ECC Side), i am getting many queues are pending also
status as "SYSFAIL".
QUEUE Names are R3AD_000000123,R3AD_000000139,R3AD_000000141... R3AD_*,etc..
I tried to unlock the queues and activated, afterthat also queue status is "SYSFAIL". Then i checked in CRM side
Transaction Code SMW01,
BDOC Details:
BDOC State Description: Information no processing.
BDOC Type :BUS_TRANS_MSG.
ERROR Message:
a.Processing of document with GUID 4E57E4A5108162A7E10000000A0BE02A is canceled.
b.Business transaction type ZEQQ does not exist.
c.Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
Thanks and Regards,
Ravi A

Maintain a filter in ECC go to Tcode SM30 , then go to table/view and enter CRMRFCPAR click maintain and enter
User CRM
Object Name SALESDOCUMENT
Destination xxxxxxxxxxxx
Load Type delta download
Queue Name
Queue Name
BAPINAME
INFO
InQueue Flag X
Send XML
CRM Release 700
Logical system xxxxxxxxxxx
this will stop the flow of ecc sales documents to crm
this will also stop Bdcos in SMW01
Please let me know if this helped

Similar Messages

Outbound Queue in ECC with CRM Destination

Dear experts
In ECC - t-code SMQ1, outbound queues R3AD_SALESDOxxxx in destination to the CRM system are in SYSFAIL.
I think those queues are created when an ECC user changes or creates a sales document in ECC. But we don't synchronise sales documents between ECC and CRM.
What are the settings to avoid this outbound queue to be created?
Thanks in advance,
Regards, Stephanie

Hello Stephanie.
Please remove the following table entry in your ECC system:
TBE31 (Application components by Publish & Subscribe interface)
- The following entries must exist for a successful data exchange:
                 Event            00501014
                 Obj.class        BUSPROCESSND
                 Fmodule          CRS_SALES_COLLECT_DATA
   Also see Note 490932.
Best regards,
Maggie

SYSFAIL Error in SMQ1 (Outbound)

Hi Experts,
We came across the dumped queues in SMQ1 (Outbound) with SYSFAIL error which were specifically described as: Die laufende Anwendung hat bewußt einen Abbruch mit Kurzdump ausgelöst which means, The current application has deliberately triggered a termination with short dump.
One example is: CRM_BT_LRP4910739398ZDE1.
We tried RSQOWKEX to restart the queues but the attempt was unsuccessful.
Thanks for your help.

Hi Vinay/Denis,
Thanks for your inputs.
We already tried to look for these queues in SMW01 but all of those queues are not found in middleware.
Is there any other way on how we can proceed?
Thanks for your prompt response.

Distributed queue usage with custom queue listeners in cluster

Hi,
Can someone help in solving the issue. We have a web application which will create consumers(threads in infinite loop) for an inbound queue(name comes from DB table) and after doing certain process result will be pushed to outbound queue(name comes from DB table).
When application runs in single managed server(without clustering) every thing works fine.
If I want to deploy the same application in two managed servers (with are under same cluster) which talks to same DB how to handle above scenario
1. Create 2 JMS servers one on each managed server(on different machines)
2. Create queue one for each JMS server
3. Create distributed queue and add above two queues as members of it
4. Create connection factory and target it to cluster
After creating above instrastructure(similar infrastructure will be created for inbound and outbound queue), can I use distributed queue JNDI name to create listeners(threads) to read messages? Or do I need to create listeners for each individual member in the distributed queue?
I know that while sending message to distributed queue, I can create sender on distributed queue and weblogic automatically takes care of sending the message to appropriate member in the DQ, but how it works for distributed queue?
Also, want to know how can I access distributed queue? For example, if managed server 1 is accessed by http://10.11.134.24:7001 and managed server 2 is accessed by http://10.11.134.25:7001. which URL I need use in JNDI context provider URL to access distributed queue? can I use any URL will it make any difference?
Generally for servlets/JSPs we create proxy server to access it through cluster, instead of directly using managed server URLs. But how it works for distributed queue?
Thanks
Santhosh
Edited by: user8676720 on Oct 4, 2011 8:35 AM

 Yes.
 It turns out that if replicate local queue jndi name in cluster is set to false
 the message did not get forward :(
 Dongbo Xiao <[email protected]> wrote:
 >Sorry, the attribute is ForwardDelay, not ForwardPolicy.
 >
 >Dongbo
 >
 >Dongbo Xiao wrote:
 >
 >> Hi Eran,
 >>
 >> Have you set up the ForwardPolicy for the Distributed Queue?
 >> By default, the ForwardPolicy is -1, which turns off the forwarding.
 >>
 >> Dongbo
 >>
 >> eran wrote:
 >>
 >> > Hello,
 >> > I have 2 nodes in cluster each one has a pinned JMS server with a
 >queue QueueA
 >> > and QueueA2
 >> > respectively both mebers in a distributed destination dist_queue.
 >> > There is a consumer on QueueA only (startup class).
 >> > In case of a message sent to QueueA2 a consumer is created for QueueA2
 >automaticly
 >> > (seen in the admin console) out of the blue, and the message do not
 >get forward
 >> > to QueueA where my consumer is listening.
 >> > Monitoring JMS connections of both servers shows only my consumers'
 >connection.
 >> > Our application depends on the forward feature.
 >> > Am I doing something wrong? any ideas?
 >> >
 >> > Thanks.
 >> > Eran
 >

Dynamic queue name with JMS Queue XML?

Hi,
Is it possible to use dynamic queue name with JMS Queue XML?
I tried using a variable in the JNDI URL, and supply the value in a package. I specified the following in the JNDI URL in the Topology:
e.g.
<JMS_RESOURCE>?d=<DTD_FILE>&s=<SCHEMA>&JMS_DESTINATION=#PROJECT_NAME.dest_var
I declared and set the variable in a package, then tried to load data from the above data server to database. But executing this package gave me the following error:
7000 : null : java.sql.SQLException: javax.jms.JMSException: Cannot find the target in JNDI (#PROJECT_NAME.dest_var)
java.sql.SQLException: javax.jms.JMSException: Cannot find the target in JNDI (#PROJECT_NAME.dest_var)
 at com.sunopsis.jdbc.driver.bg.executeQuery(bg.java)
 at com.sunopsis.jdbc.driver.bh.executeQuery(bh.java)
 at com.sunopsis.jdbc.driver.l.f(l.java)
 at com.sunopsis.jdbc.driver.l.executeUpdate(l.java)
 at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execSrcOrders(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
 at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
 at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
 at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
 at com.sunopsis.dwg.cmd.e.i(e.java)
 at com.sunopsis.dwg.cmd.g.y(g.java)
 at com.sunopsis.dwg.cmd.e.run(e.java)
 at java.lang.Thread.run(Unknown Source)
Am I doing it wrongly?
Thanks!

hi,
as it's not in Adapter-Specific Message Properties
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
looks like you cannot do it with jms adapter in standard
use proxy or your own adapter instead
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Parallel process with a queue and file?

Hello, first of all sorry for my bad english^^:
I am working for days on my project where I have to show the parallel process while transfering information by different ways and their problems (like timing and so on).
I chose the transmission of information to a parallel process by (1) a queue, and by (2) a file (.txt). (other ways are welcome, do you have 1-2 other ideas?)
To solve this problem I made three while loops, the first one is the original one, where the original information (as a signal) is created and send by queue and file to the other two while loops, where this information is getting evaluted to create the same signal.
so in the end you can compare all signals, if they are the same - so that you can answer the question with the parallelity of process.
but in my vi file i have some problems:
the version with the queue works pretty fine - it's almost parallel
but the version with file doesn't work parallel, and i have no idea how i can solve it - -
i'm a newbie^^
can someone correct my file, so both (file and queue version) run parallel with the original one, or tell me what i can or must do?
Attachments:
Queue_Data_Parallel_FORUM.vi ‏23 KB

LapLapLap wrote:
Hello, first of all sorry for my bad english^^:
I am working for days on my project where I have to show the parallel process while transfering information by different ways and their problems (like timing and so on).
I chose the transmission of information to a parallel process by (1) a queue, and by (2) a file (.txt). (other ways are welcome, do you have 1-2 other ideas?)
To solve this problem I made three while loops, the first one is the original one, where the original information (as a signal) is created and send by queue and file to the other two while loops, where this information is getting evaluted to create the same signal.
so in the end you can compare all signals, if they are the same - so that you can answer the question with the parallelity of process.
but in my vi file i have some problems:
the version with the queue works pretty fine - it's almost parallel
but the version with file doesn't work parallel, and i have no idea how i can solve it - -
i'm a newbie^^
can someone correct my file, so both (file and queue version) run parallel with the original one, or tell me what i can or must do?
A queue is technically never parallell, though you can have several if you really need parallellism. Other methods include Events, Action Engines, Notifiers (and why not webservices) for information transfer between processes.
Due to limitations in the disk system you can only read/write one file at a time from one process, so i wouldn't recommend that. If you use a ramdisk it might work.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

ODI integration with JMS Queue

Hi,
I've been searching for some instructions on how to integrate ODI with JMS Queue but there's a distinct lack of information on the internet.
Can anybody point me to a step by step guide they have come across?
Any help is gratefully received.
Thanks
Gav

Hi Manish,
As of now there is no out-box-adapter for JMS queue.
If you don’t want JNBridge adapter (I hope you’re referring to same. There is no “jt” adapter as you mentioned), you can create a custom adapter which access the JMS queue.
Use WCF LOB adaper (WCF Lob
Adapter Wizard)and create an adapter.
Following article details about the .NET code for messaging with JMS queue, try the code.
Use JMS Messaging in your C# Applications
And following articles give details about using WCF LOB adapter/Wizard:
What Is the WCF LOB Adapter SDK?
Sample:
https://msdn.microsoft.com/en-us/library/bb798102.aspx
http://geekswithblogs.net/michaelstephenson/archive/2009/02/10/129302.aspx
Use similar code (one from above codeproject article where how to do messaging between JMS queue is shown) to wrapper it around custom WCF LOB adapter.
Give it a try, if you don’t want to spend anything on a 3rd party adapter.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Integration with JMS queue from BizTalk 2013R2

Hi All,
We are planning to integrate biztalk application with Oracle Siebel CRM (8.1.1.11). they wanted to use JMS queue to receive xml message from BizTalk2013R2 and also send message to BizTalk for more reliability.
IS there any out of box adapter by which we can connect to their JMS queue.
We dont want to go with 3rd party software like jt adapter for JMS queue
Regards,
Manish
Manish

Hi Manish,
As of now there is no out-box-adapter for JMS queue.
If you don’t want JNBridge adapter (I hope you’re referring to same. There is no “jt” adapter as you mentioned), you can create a custom adapter which access the JMS queue.
Use WCF LOB adaper (WCF Lob
Adapter Wizard)and create an adapter.
Following article details about the .NET code for messaging with JMS queue, try the code.
Use JMS Messaging in your C# Applications
And following articles give details about using WCF LOB adapter/Wizard:
What Is the WCF LOB Adapter SDK?
Sample:
https://msdn.microsoft.com/en-us/library/bb798102.aspx
http://geekswithblogs.net/michaelstephenson/archive/2009/02/10/129302.aspx
Use similar code (one from above codeproject article where how to do messaging between JMS queue is shown) to wrapper it around custom WCF LOB adapter.
Give it a try, if you don’t want to spend anything on a 3rd party adapter.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

JCA Message Inflow Integration With JMS Queue

Hi,
I want to integrate JCA message inflows with JMS Queue. I know JCA Message Inflow destination can be Message Driven Bean. But is it possible to specify a JMS queue as destination of JCA Message Inflow.
i.e.
JCA -> MDB -> JMS Queue
OR
JCA -> JMS Queue
Thanks

Hi Manish,
As of now there is no out-box-adapter for JMS queue.
If you don’t want JNBridge adapter (I hope you’re referring to same. There is no “jt” adapter as you mentioned), you can create a custom adapter which access the JMS queue.
Use WCF LOB adaper (WCF Lob
Adapter Wizard)and create an adapter.
Following article details about the .NET code for messaging with JMS queue, try the code.
Use JMS Messaging in your C# Applications
And following articles give details about using WCF LOB adapter/Wizard:
What Is the WCF LOB Adapter SDK?
Sample:
https://msdn.microsoft.com/en-us/library/bb798102.aspx
http://geekswithblogs.net/michaelstephenson/archive/2009/02/10/129302.aspx
Use similar code (one from above codeproject article where how to do messaging between JMS queue is shown) to wrapper it around custom WCF LOB adapter.
Give it a try, if you don’t want to spend anything on a 3rd party adapter.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Getting error while processing EDIFACT-D96A-ORDERS.. Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND

Hi Anuj & All,
 I'm trying to create an outbound scenario with EDIFACT-D96A-ORDERS. A simple SOA composite application polling data from DB and through B2B adapter 'send' option provides data to B2B system.
Set up two partner profiles like this,
Host:
Name: HTP
EDI Group ID: HTP
EDI Interchange ID: Interchange Sen
EDI Interchange ID Qualifier: 01
Remote:
Name: RTP
EDI Group ID: RTP
EDI Interchange ID: Interchange Rec
EDI Interchange ID Qualifier: 01
Other settings are as usual. Delivery channel of generic file created on RTH.
Now, few documents settings on B2B console are like this,
D96A-> Interchange tab
Create UNA: Never
ORDERS-> Transaction
Functional Group Identifier Code: ORDERS
Controlling Agency: UN
- other properties are unchanged.
On SOA side, the bpel invoke activity which calls B2B adapter has following properties:
<invoke name="InvokeOrders"
inputVariable="InvokeOrders_send_InputVariable"
partnerLink="D96A.ORDERS" portType="ns2:send_ptt"
operation="send" bpelx:invokeAsDetail="no">
<bpelx:inputProperty name="b2b.toTradingPartnerIdType"
 expression="'NAME'"/>
<bpelx:inputProperty name="b2b.toTradingPartnerId"
 expression="'RTP'"/>
<bpelx:inputProperty name="b2b.messageType" expression="1"/>
<bpelx:inputProperty name="b2b.messageId" variable="messageID"/>
<bpelx:inputProperty name="b2b.fromTradingPartnerIdType"
 expression="'NAME'"/>
<bpelx:inputProperty name="b2b.fromTradingPartnerId"
 expression="'HTP'"/>
<bpelx:inputProperty name="b2b.documentTypeName"
 expression="'ORDERS'"/>
<bpelx:inputProperty name="b2b.documentProtocolVersion"
 expression="'D96A'"/>
<bpelx:inputProperty name="b2b.documentProtocolName"
 expression="'EDIFACT'"/>
<bpelx:inputProperty name="b2b.documentDefinitionName"
 expression="'ORDERS_def'"/>
<bpelx:inputProperty name="b2b.conversationId"
 variable="ConversationID"/>
</invoke>
The error I'm getting on B2B Console->Reports->Business Message, while running this is,
Error Code B2B-50547
Error Description Machine Info: (htp01310-vm01.htp.com) Description: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
Note: On Manage Deployment Tab I've checked the agreement is in active state.
-- Business Message (Result):--
State: MSG_ERROR
Document Type: ORDERS
Agreement: <blank>
Sender: HTP
Receiver: <blank>
-- Application Message (Result):--
Sender Id Type: NAME
Sender Value: TCS
Receiver Id Type: NAME
Receiver Value: ORCL
Document Type: ORDERS
Document Definition: ORDERS_def
Document Protocol Name: EDIFACT
Document Protocol Version: D96A
Direction: OUTBOUND
State: MSG_COMPLETE
- Can anybody please shoot some pointer on how to resolve this? Please let me know if you need further configuration details which I've not mentioned here.
Regards,
- @bhijit

Hi Mariusz,
 Thanks for your reply. Yes I think so, probably you're right. But finest trace level doesn't give much clues on "wrong mapped" data. Anyway, here is the detail log. Please don't forget to point out if you find something interesting.
#### <Error> <oracle.soa.b2b.engine> <htp01310-vm01.htp.com> <soa_server1> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
> <<anonymous>> <BEA1-0D3F5ABAC0B2E50C6CCB> <449b4b64fa2729cc:59737e36:146f08831ee:-8000-0000000000127da6> <1404379704092> <BEA-000000> <Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
#### <Error> <oracle.soa.b2b.engine> <htp01310-vm01.htp.com> <soa_server1> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
> <<anonymous>> <BEA1-0D3F5ABAC0B2E50C6CCB> <449b4b64fa2729cc:59737e36:146f08831ee:-8000-0000000000127da6> <1404379704569> <BEA-000000> <Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
Rgds,
- Abhijit
P.S. - Can you please check what is the value of "Functional Group Identifier Code" for D96A ORDERS.

Local move requests stuck with status "queued" at 0% completion

Hello all,
I'm running Exchange server 2010 SP3 with no aditonal RU.
Suddenly we are unable to perform local move requests of mailboxes between databases.
The requests will turn up in the list at Recipient "Configuration\Move Requests" but remain the with status Queued with 0% completion.
It does not matter if the move request is initiated by EMC of the Shell.
I cant find a solution so if someone has some advise that would be great,
I tried the following:
- Restarted the Mailbox Replication service on the CAS server
- Rebooted the Mailbox, CAS and Edge server
- Run a Test-MRSHealth check against the CAS
- Checked all logs but there are no related entries
- Checked my admin account permissions
- Checked if it is related to certain mailboxes and source and destination databases which isn't the case
What else can I do or check?
Kind regards,
Alex

Hi,
You mentioned you checked the event log, but there was no related events.
Have you tried to use the get-moverequest | get-moverequeststatistics cmdlet to check result?
If no, please run this command to see if there is any clues that can be used to narrow down this issue.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

What is wrong with my queue?

Hi all,
11.2.0.1
I am creating a queue using:
/* create queue */
EXEC DBMS_AQADM.CREATE_QUEUE(
queue_name => 'GREETINGQUEUE',
queue_table => 'GREETINGQUEUETAB');
======
SQL> EXEC DBMS_AQADM.CREATE_QUEUE(
queue_name => 'GREETINGQUEUE',
queue_table => 'GREETINGQUEUETAB');BEGIN DBMS_AQADM.CREATE_QUEUE(; END;
ERROR at line 1:
ORA-06550: line 1, column 31:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( ) - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable>
table continue avg count current exists max min prior sql
stddev sum variance execute multiset the both leading
trailing forall merge year month day hour minute second
timezone_hour timezone_minute timezone_region timezone_abbr
time timestamp interval date
<a string literal with character set specification>
Please helpppp....
Thanks,
pK

There's nothing wrong with your queue.
If you were to read...(wait for it).... the documentation, specifically the SQL*Plus users guide on how the exec command works, you'd find the answer.

I am struck up with the sql query pleas help me

Hi,
i am struck up with this query
select cpuid,hostid,timestamp from
system_Cpu
where hostid='dscp02469' AND cpuid='second'
CPUID HOSTID TIMESTAMP
second dscp02469 29:jun:2006:18:30:18
second dscp02469 29:jun:2006:18:31:04
second dscp02469 29:jun:2006:18:32:53
second dscp02469 29:jun:2006:18:40:39
second dscp02469 29:jun:2006:18:41:26
second dscp02469 29:jun:2006:18:42:31 (top entry)
i have to get top five minutes records
CPUID HOSTID TIMESTAMP
second dscp02469 29:jun:2006:18:40:39
second dscp02469 29:jun:2006:18:41:26
second dscp02469 29:jun:2006:18:42:31
i am writing this query
select cpuid,hostid,timestamp from system_Cpu where hostid='dscp02469' AND cpuid='second' having max(timestamp)-timestamp<5/1440
having max(timestamp)-timestamp<5/1440
ERROR at line 2:
ORA-00979: not a GROUP BY expression
Message was edited by:
user517983

You seem to be offended...
Well, here is what I tried out (and then posted)...
SQL> select cpuid,hostid,to_char(timestamp, 'dd/mon/yyyy hh24:mi:ss') FROM(select cpuid,hostid,times
tamp, max(timestamp) over () maxts from system_Cpu where hostid='dscp02469' AND cpuid='second' )WHER
E maxts-timestamp<5/1440 ;
CPUID HOSTID TO_CHAR(TIMESTAMP,'D
second dscp02469 29/jun/2006 18:40:39
second dscp02469 29/jun/2006 18:41:26
second dscp02469 29/jun/2006 18:42:31And just to display time component, I modified it a bit...
SQL> select cpuid,hostid,to_char(timestamp, 'dd/mon/yyyy hh24:mi:ss') FROM(select cpuid,hostid,times
tamp, max(timestamp) over () maxts from system_Cpu where hostid='dscp02469' AND cpuid='second' )WHER
E maxts-timestamp<5/1440 ;
CPUID HOSTID TO_CHAR(TIMESTAMP,'D
second dscp02469 29/jun/2006 18:40:39
second dscp02469 29/jun/2006 18:41:26
second dscp02469 29/jun/2006 18:42:31It worked for me. BTW, the way I interpreted the OP's requirement was-give all records that are within 5 minutes interval from the top (or max) timestamp.
I may be wrong...

Error 1 with De-Queue on STOP?

Hi everyone,
Attached is a vi I have been working on (using simulated DAQ cards; so data are sine waves)... When I press 'STOP' I get "Error 1" warnings; something to with de-queue inputs? Any suggestions?
Thanks,
Jack
Attachments:
VA_Instrument_(Queue)MOD[Jack].vi ‏61 KB

Thanks RavensFan... That worked...
However, I have used a notifier to stop all the loops, rather than a queue (as I only need one notifier, rather that a queue between each loop)... I assume that is ok and appropriate coding practice...
I now have another problem.. In my UE Command Loop I would like to add ALL user commands that will be used in the vi, such as menu commands for read, idle and stop, plus other boolean comments that might, for example, change the x axis scale on wavefort charts... Currently, the way I have this set-up makes the chart flicker...
It it possible to have ALL user commends send in the one queue so that the number of wires can be reduced? Attached is my current code.
Thanks,
Jack
Attachments:
VA Instrument (Queue3).vi ‏46 KB

US online number with the ability to make outbound...

Hello everybody,
I currently live in Egypt and my new job requires that I have an online USA phone number with the ability to make outbound calls. Now after going through the site, I understand that online numbers has you recieve calls wherever you are, but does it always have you make calls to the US or what? And are those calls covered with the subscripition or is it a seperate bill?
Help seriously needed ASAP, thanks a million!

maboushoer wrote:
Hello everybody,
I currently live in Egypt and my new job requires that I have an online USA phone number with the ability to make outbound calls. Now after going through the site, I understand that online numbers has you recieve calls wherever you are, but does it always have you make calls to the US or what? And are those calls covered with the subscripition or is it a seperate bill?
Help seriously needed ASAP, thanks a million!
You are correct, the ability to receive calls from telephones (the Online Number) is separate from the ability to make calls to telephones (the subscriptions). Having one does not give you the other. When logged into Skype from almost anywhere, you would be able to receive calls made to your Online Number, and - with the subscription, or by simply adding Skype Credit to your account - have the ability to call telephones from Skype.
For calling to the States, there is an Unlimited USA & Canada subscription at US$ 2.99/month, or with a 15% discount if purchased for a year at a time (just over US$ 30/year). This subscription, along with a US online number, effectively gives you a US "telephone" that you can use from Egypt or anywhere else. Please keep in mind Skype's fair-use policy regarding subscriptions. Click on "Subscriptions" below for more details.
Good luck!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Struck up with R3AD_* Queues in SMQ1(Outbound Queue in ECC Side)

Similar Messages

Maybe you are looking for