Stuck in Step Mode

I am running LabView 7 and for some reason when I click the run button it automatically goes into step mode... Or what looks like step mode. I tried cutting and pasting the code into a completely new VI and it still won't run continuously. Any help would be sooooo very appreciated.

I think of two problems that you could have :
- Check if the button pause is black and not red when clicking the run button. If this button is red then it means that you want LabView to run in step mode.
- If the problem is not there check if you have no breakpoints anywhere. LabView can check for you if there are breakpoints in the code. See in the different menus.
Hope this helps !
Julien

Similar Messages

  • Dear Friends, My Iphone 4s is stuck in recovery mode while trying to update to iso 6. I tried restoring it but unable to do so. gives me error 36 and goes back to recovery mode. I tried all the steps but no luck. anyone? Please Help!!!

    Dear Friends, My Iphone 4s is stuck in recovery mode while trying to update to iso 6. I tried restoring it but unable to do so. gives me error 36 and goes back to recovery mode. I tried all the steps but no luck. anyone? Please Help!!

    This writeup comes from the article referenced below it:
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1

  • Stuck in Recovery Mode - Tried All Troubleshooting Steps

    My 16GB iTouch [latest firmware] is stuck in recovery mode... iTouch displays 'Connect to iTunes' and when I do this iTunes says, "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes."
    So, like a good little puppet, I restore my iPod.
    When the process completes a message pops up saying restoration successful and iPod restarting.
    After clicking ok or letting message expire on its own I get bumped back to where I was in the first place. My iPod goes straight back into recovery mode, same message displayed on iPod and iTunes.
    I have tried everything from reinstalling iTunes to different USB ports to different computers [PC & Mac], my battery is fully charged, and I am all out of ideas.
    Any suggestions??

    Hi dimpulse,
    Try the general tips in this article: http://support.apple.com/kb/TS1275
    If the issue persists after trying the tips in the article above, the iPod may need hardware repair. Just request repair online, make a reservation to have a Genius at a local Apple retail store take a look at it, or call AppleCare.
    https://selfsolve.apple.com/GetWarranty.do
    http://www.apple.com/ca/retail/geniusbar/
    iPod, iPhone and Mac technical support: 1-800-263-3394
    -Jason

  • Help! I finally decided to update my ipad from itunes/laptop & now its stuck in recovery mode!

    Hi guys. I just saw this same question from someone else but after i logged into support I cant find the post anywhere. I hate asking again, sorry for asking again, but I need HELP and cant keep searching the posts.
    Ive never updated ipad 2 before and not really good with computers. When trying to download certain apps, it would stop installing & tell me i needed to update to the latest update. Finally updated the ipad & i think syncd it but when it was done the only thing that showed up on screen is the RESTORE picture. I just realized that if i restore i will loose all my Memos & Notes. I DONT WANT TO LOOSE THEM ! I have info on ipad memo that I really need & that i didnt write down anywhere else. Is there a way to save my notes/memos/data before I restore the ipad? Ive gone 5 days without it and really need to use it. Am i just out of luck :{ ?
    There was an answer by someone about restoring an ipad giving directions and after the restore it will ask u questions that u have to answer YES to. She had school notes and the other guy had 600 pics. The girl stated she did all the steps but she didnt see anyplace to say Yes and she lost everything. Im afraid to risk it and will take it to a store or something if theres away they can do it.
    I babbled and im sorry if this made no sense so heres the clear question : Is there a way to save your memos, messages, notes, contacts, etc from an ipad that is stuck in restore mode BEFORE U restore? any help will be so appreciated !!!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • Mac stuck in safe mode start up loop

    Hi everyone,
    it seems I have run into a problem and can't find answers online.
    First off I have a MacBook intel core duo on the latest snow leopard and mac software is up to date.
    It all started when I had to restore my iPhone and it had some problems and got stuck in dfu mode, so when I decided to reboot it I unpluged it and went to reboot and problems started. Finder kept crashing. When I started up in safe mode I decided to save some important files and when I was done the finder problems persisted even while in safe mode. When I rebooted it would start up in safe mode and the loading bar on the bottom would get about a fifth of the way and stop, it would try again and get the as far as before and then shut down.
    I tried taking out and putting back in the HD and ram as well as verbose mode. It says
    Disk0s2: I/o error
    invalid node structure
    (8, 12827)
    **the volume mac HD could not be verified completely.
    /dev/rdisk0s2 (hfs) exited with signal 8
    When I decided all was hopeless I tried reinstalling the os but it got stuck on examining additional disks.
    If you need any info let me know. HUGE thanks ahead of time as I am writing this from my iPhone 2g and have a useless MacBook and dfu'd iPhone 4.

    Restart from your installer disc. Do not run the installer. Instead, from the Utilities menu select Disk Utility & run its Repair Disk step. If it can repair the HD, try reinstalling the OS again. If it cannot, you can try a more powerful (& expensive) disk repair utility like Disk Warrior, which may or may not be able to repair the damage. Otherwise, you will need to reformat the HD (losing all its data) to recover.
    You should always have a backup of your data. If you do not, it may be worth gambling on the price of Disk Warrior, but remember that there are no guarantees it can repair the damage.

  • I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

    I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • When syncing after recent update, sync is stuck at "Step 4 of 4" "Waiting for changes to be applied" and will not complete, even after hours.  How can this be fixed?

    I completed the most recent software update for both iTunes and iPhone recently.  I am now trying to sync my iPhone to add newly purchased audiobooks and the sync remains stuck at "Step 4 of 4" with the message "Waiting for changes to be applied"  I have tried everything to correct this.  When sync is cancelled a failure to sync message is generated.  Any ideas????

    Alright, so I reset my computer and suddenly it then recovered. Other times it wouldn't recover after resetting the computer, so I have no idea how it happened. I just restarted the computer lots of time and finally it worked.
    Okay, back to square one. Now to transfer music, I tried my previous acknowledgable solutions but they didn't work. The iPod touch does not feature a hard-disk mode, and windows media player doesn't support iPods.
    I've tried multiple programs to transfer music but none of them work properly and keep giving me error codes. So my iPod still gets stuck at Step 4: Waiting for changes to be applied or whatever it said.
    Thanks in advance ._. (Please help)
    p.s - Apple is useless. If I don't get steady answers tomorrow I'm going to end up calling them and get this problem fixed first hand. Second hand? I don't know, over the **** phone.
    juiceb0xk signing out for the night. Bye. >:(

  • How do i fix my iphone 5 stuck in recovery mode and wont let me restore it just says unknown error 1603 has occured

    how do i fix my iphone 5 stuck in recovery mode and wont let me restore it just says unknown error 1603 has occured

    http://support.apple.com/kb/TS3694#error1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
    http://support.apple.com/kb/TS3694#error1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

  • My ipod touch is stuck in recovery mode I tried RecBoot and the reiBoot  both fail to get me out of recovery  I get error 28 instad  now what?

    My ipod Touch 2nd Gen 8GB is stuck in recovery mode   I tried RecBoot and when that couldn't do it I tried reiBoot  both failed to fix my problem  what do you suggest?

    Start off with some basic steps:
    - Make sure iTunes is up to date
    - Try another usb cable
    - Try another usb port
    In the article Resolve iOS update and restore errors this is what it says about error 28:
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • My iphone 5 is stuck in recovery mode after battery change?

    my iphone 5 is stuck in recovery mode after battery change, I decided to change my faulty iphone 5 battery as i was out of warrenty, I managed to chance the battery with no problems (I Think), when i put the phone back together and tried to power on with the power button, nothing happened.!  i connected to itunes and it powered on, displaying the connect to itunes screen (recovery mode) all was going well, the phone was restoring, the image of the phone restoring and loading up was displayed on the screen, when it finished it restarted but to show the connect to itunes screen again, it is stuck in the recovery loop. i tried the steps with holding the power and home button etc, none worked.! now when i try to restore, it extracts software but then, ' the iphone could not be restored, an unknown error occured (3194)' comes up, any ideas out there???? and Happy Christmas to Everyone ,

    Hello Andyoneill9,
    It sounds like you are trying to restore your phone but keep getting an errror message 3194. I want to recommend the troubleshooting steps from this article named:
    Error 3194 or "This device isn't eligible for the requested build"
    http://support.apple.com/kb/ts4451
    Resolution
    Important: If you see one of these messages and need help updating or restoring your iOS device, Install the latest version of iTunes and try to update or restore again. After that, follow these steps if you need more help.
    Check your "hosts" file
    After you've updated iTunes to the latest version, you can check the hosts file to be sure your computer can contact the update server. Use the numbered steps below if you’re on a Mac.
    If you’re using a Windows computer, follow steps in this Microsoft support article, noting that resetting the hosts file will affect software services that rely on hosts file redirects. If you're using Windows on a business computer, consult your IT department to be sure applications will still work correctly after resetting the hosts file.
    In the Finder, choose Applications > Utilities.
    Open Terminal.
    Enter this command and then press Return:
    sudo nano /private/etc/hosts
    Enter the password you use to sign in to your computer and press Return. You won't see text appear in the Terminal window when you enter the password. Make sure you use a nonblank administrator password.
    Terminal will display the hosts file. Navigate using the arrow keys and look for an entry containing “gs.apple.com”.
    Add the # symbol and a space ("# ") to the beginning of the gs.apple.com entry.
    Press Control-O to save the file. Then, press Enter when prompted for the filename and Control-X to exit the editor.
    Restart your computer.
    Try to update or restore your iOS device again.
    This is the first troublehsooting step to try, so there are additional things to try if needed you need them.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • IPod Touch 4g stuck in recovery mode after iso 5.0 upgrade attempt

    Sorry that I'm late to the party and too stupid not to know better when updating my ipod touch just days after the update was released, when will I learn.
    I have tried nearly everything I've seen posted in this community and others ... unpluging all usb, holding down sleep and home, re-installing itunes 10.5 ... you name it.
    I can't find an answer to this problem anywhere, but rather people yelling at other people for not being able to help and badmouthing eachother because they are ****** off at Apple.
    Is there any updated news on what the issue is with error 1604 or why Idevices are getting stuck in recovery mode?
    Are the servers still swamped and I just can't get through?
    Next time I will wait about 3 months before upgrading a new operating system (but then, I think I said that the last time I did this.)
    Thanks for any help.

    Try a manual install, as outlined in the link below. You can kick it out of Recovery Mode using RecBoot.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • HT201210 my ipod touch is stuck in recovery mode

    I just tried to restore my ipod to its factory settings, the process was not completed. Says an error (1) has occured, now my ipod is stuck in recovery mode. What do I do?

    Hi drhenrie,
    Thank you for using Apple Support Communities. 
    If you are having troubles restoring your iPod and the steps in the article you came from didn't help. I would continue with this step from the following article:
    Check for hardware issues
    Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
    Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Make sure that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    Get help with iOS update and restore errors - Apple Support
    Regards,
    Jeff D. 

  • Iphone 6 plus stuck in recovery mode

    Hello
    I wanted to restore my fairly new 6plus to "as new" as i found that when i originally restored from backup battery life wasn't the greatest.
    I followed all the necessary steps and when i hit restore in iTunes, it started searching for iPhone and remained there.
    I tried all methods of holding down home and power button etc. but still nothing
    Can anyone offer any advise as yo how i can fix this or do i need to take it in to apple.
    Thank you

    While trying to update my IPhone 6 Plus to IOS 8 through iTunes the file became corrupt my IPhone was stuck on recovery mode. I had tried everything but nothing seemed to worked. I gave up and decided to call apple for help, they had me on hold for about 20 minutes. While waiting I had found the program Reiboot and it saved my IPhone (I was still on hold). If none of the things mentioned before me work for you do the following
    1) Go to http://www.tenorshare.com/product/reiboot.html
    2) Download reiboot for Mac/PC depending on your preference.
    3) Install then run the program.
    4) Connect your IPhone/IPad/IPod then click exit recovery and it should return you device back to how it was before you tried to update.
    NOTE:If you want to try updating again do it through your device it worked out for me.

  • Iphone 6 plus stuck in landscape mode rotation failure

    Hi
    My iPhone  6 plus keeps getting stuck in landscape mode even though rotation is not locked. Is this a bug, is there a fix?
    Thanks

    Hi Sunnifromlondon,
    Thanks for visiting Apple Support Communities.
    If your iPhone screen is not rotating as expected, there could be several potential causes. First, we can attempt some troubleshooting steps that may resolve the issue.
    I recommend going through all of the steps in this support site article:
    iOS: Screen does not rotate
    Best Regards,
    Jeremy

  • IPhone 6 getting stuck in landscape mode

    My iPhone 6 keeps getting stuck in landscape mode. Also the camera will not always open from the locked screen, it just bounces up and down but does not slide all the way up to launch the camera app. Is apple working on a fix?

    Hi Sunnifromlondon,
    Thanks for visiting Apple Support Communities.
    If your iPhone screen is not rotating as expected, there could be several potential causes. First, we can attempt some troubleshooting steps that may resolve the issue.
    I recommend going through all of the steps in this support site article:
    iOS: Screen does not rotate
    Best Regards,
    Jeremy

Maybe you are looking for

  • Error While Creating Runtime Systems on an Existing Track in NWDI

    Hi, There is already a track in NWDI with No runtime Systems. I have to create the RunTime Systems to do development on this track. When I try to select the Development checkbox in Runtime systems, select configure  without wizard, Gave   Deploy Host

  • Duplicate records In Master Data

    Hi, I don't understant why we get Duplicate records in Master Data though it has got the overwritten functionality..    Any idea will be appreciated..

  • Easy DMS-check in

    Dear all In easy, I have edit the file (txt,excel etc) , after editing system automatically do chek in but some cases system can not do check in (locked open) In that case  I do it manually clickin. Kindly let me know the reason why system is behavin

  • Free Drum Loops for you to play with

    Hey all: In the holiday spirit of giving back to the community, etc., etc., I thought maybe you all would enjoy some badass drum loops to play around with in Soundtrack Pro (my all-time favorite Apple program). So here goes: This is a zip file contai

  • Adding raptor internal drive to macpro. Opinions?

    Hello everybody, I am thinking of adding a Western Digital Raptor: WD1500ADFD 150GB 10,000 RPM 16MB Cache Serial ATA150 Hard Drive - OEM to my macpro. Based on the newegg website, most customers are satisfied. There are few though not too happy about