Styles being dropped on network shared folder files in Dreamweaver CS5.5

Hello, apoligies if this has already been solved but I could not find anything similar. Recently we have upgraded our staff from Dreamweaver CS4 to CS5.5 and are having some issues with pages dropping the stylesheets which are linked relatively. The relative files are located on a shared network drive which is mapped in Windows 7 as a drive (e.g. My Computer shows the drive as R:).
In Dreamweaver design view up the top it reads:
Address: file:///R|/acrrm/tinnitus/course_content/001.html
and there is a yellow bar up the top which reads:
'common_styles.css' is a remote file and cannot be edited.
We never had this issue before so I was wondering if it was a new limitation of CS5.5 or if there was something I should look out for in the site definition.
Interestingly enough I was able to fix this on one machine by randomly toggling the live code/view buttons, havent had any luck doing that to other machines though.
Any help would be much appreciated.
Here are the specs:
O.S: Windows 7
Version: Dreamweaver CS5.5
Site Definition: Network shared drive

Interestingly enough I was able to fix this on one machine by randomly toggling the live code/view buttons, havent had any luck doing that to other machines though.
I would have to say that this operation could not possibly fix anything.  I suspect that simply waiting the same amount of time as this operation required would have returned the same result, and it sounds like there is some latency in your network.
Your site is entirely contained on a network shared drive, right?  Or is it that only SOME files are on the network shared drive (R:)?  Also, where is it you are seeing this?
Address: file:///R|/acrrm/tinnitus/course_content/001.html

Similar Messages

  • Playing a FLV-File in a projector.exe from a network shared folder failes

    We want to load and play FLV-Files while our project files
    (Projector.exe) and FLV-files are sitting on a network shared
    folder with UNC-Path access (\\FILESERVER\sharename\). The problem
    is, that the flv-files do not play. If the same application runs on
    a local system it works fine. The is
    "localTrusted" because it runs in a projector.
    We do not want to map the shared folder to a drive letter!
    Thank you

    I apologize if u can not load the page, its a hosting company issue, their server goes up and down randomnly so please to retry 15mn later, it will be available.  Thanks.

  • Is it possible to create network shared folder via flex

    I am working on flex Air Project which requried a network shared folder to access it from network to store files. Is there any way to make a shared Network Folder. Please help me on this point.

    of couse you could.
    1  File class is used to operate the filesystem
    2  Socket class is used to transport bytedata in files;

  • How to access to network shared folder from in-house web application mozilla firefox?

    We are trying to access network shared folder from our in-house application but its not possible. The reason we found was because of security model. Please can you provide solution for this issue.
    Incident Details for shared folder access issue
    Expected behaviour:
    Network shared folders should be opened via all versions of Internet Explorer from an in-house web application.
    Actual behaviour:
    Works fine in IE but not in Mozilla firefox. Refer snapshot.
    Server configuration:
    Web server: Apache
    Operating System: Windows Server 2008 R2
    Image uploaded:
    Network Shared Folder doesn’t open in Mozilla. Uploaded image is from IE it allows to access to network shared folder but not Mozilla.
    No warning or error message is shown.

    If its a shared folder on windows drive with access permission to all, you might get your work done using simple GUI_UPLOAD.
    Have you checked this. Just a thought.

  • Saving files crashes dreamweaver CS5 running 10.6.8...

    Saving files crashes dreamweaver CS5 running 10.6.8...

    I think it might have been an Apple security update, still doing research on this problem. Anyone else have any insight??? I called Adobe today and they couldn't fix it. DreamWeaver CS5 crashes on saving on Mac OS 10.6.8, a huge bummer.

  • Can not edit file on network shared folder after upgrading to windows 7

    Merry Christmas and happy new year,
    Due to some configuration changes on a specific application, I have forced to upgrade OS of a few number of workstations from Windows XP to windows 7. After upgrading I am facing a strange problem on WIN7 workstations. These workstation are member of a Windows
    2008 R2 Active Directory domain which also has a Windows 2003 advanced server additional domain controller. Also there are a number of shared folders on some member servers (all windows 2003) which are mapped as network drives at user logon. Before upgrading
    mentioned workstations to WIN7, users was able to edit his/her files on all of mapped network drive according to his/her permissions without any problem on their WINXP workstations, But after installing windows 7 they begin facing problem on one of these mapped
    network drives and the problem exactly is when they edit a file, in more specific word an excel file, and then try to save, the excel returns an error message of "document not saved" and exit the excel program. It becomes more strange when you learn
    that the edited excel file is disappeared and replace with some "tmp" file. If user copy the excel file to his/her own desktop, edit it and then copy it back to its original place on mapped network drive, it will be replaced normally with its older
    version. In other words if user wants to edit an excel file on that specific network drive, he/she must edits it somewhere else and then replace it on the network drive. If the same user uses a WINXP box, there will be no problem.
    Can anybody help me to fix the issue?

    Thank you Karen,
    The problem is fixed, but my case was none of what you suggested. In fact I have
    another problem which I described in another question and it was of the root of this excel file issue. I describe what I have done to fix the latter problem hope to help fixing similar issues to mine.
    Okay, as it is described in the
    question, I was not able to open a shared folder with its UNC address while it could be mapped as a network drive without any problem. I examined what I was replied and some other ways, came to no result. I decided investigate a similar shared folder in
    permissions to problematic one to see if the problem is repeated. So I created a folder and shared it with similar permissions and examined it. Surprisingly there was no problem. It was wise to remove sharing of the problematic folder and share it again to
    see if the problem resist. But when I tried to remove sharing I received an error message saying that
    the shared folder is related to a DFS root. When I took a look at the DFS roots of domain there was no sign of the problematic folder (that made me recall that I created a DFS root with problematic folder mistakenly and removed that DFS root).
    After little searching, I found out that the problem could be caused by traces of the removed DFS root. Yep! I found the suspect! The registry key
    HKLM\Software\Microsoft\DFS\Domain\problematic shared folder. I removed the key restarted DFS service and log off and on and Bingo!
    This problem pops up a few more questions:
    1) Why is not the registry key related to removed DFS root deleted from the registry of windows 2003 server?
    2) Why was I able to browse this ex-DFS root shared folder without any problem in windows XP while it was problematic in windows 7?
    3) As there is no special client service for DFS and user can access DFS root targets like other shared folders what is the deference between shared resource access mechanisms in windows XP and windows 7 that caused the problem?

  • How to setup a custom background in network shared folder Server 2012

    We have a Server 2012 acting as Domain server, and also has a shared folder. The client computers are Windows 8.1. Now I need to set up a picture as the background of the shared folder, and I want all client computers to see that picture when open it. How
    can I do that? 
    I tried this solution but did not work: 
    Create a desktop.ini fine inside that folder and put following contents,
    Once it is done reboot the machine. This folder will be visible with the sepcified image,
    Please help me, thanks guys!

    As you said it will not work since Windows Vista. I've seen some third party appliations could help change the background of a shared folder. 
    If you have any feedback on our support, please send to [email protected]

  • How to enable syntax highlighting for jspf files on Dreamweaver CS5.5 on Mac

    I ran into an issue where I couldn't get the color coding (color coding style) for java server pages fragments (.jspf) files to show syntax highliting.
    I followed the adobe instructions on Changing and adding file extensions recognized by Dreamweaver without any luck.
    Here is the solution that worked for me:
    On a Mac:
    1. Edit the /Users/YOUR USER/Library/Application Support/Adobe/Dreamweaver CS5.5/en_US/Configuration/DocumentTypes/MMDocumetTypes.xml
    Note: the Adobe instructions tell you to edit /Applications/Adobe Dreamweaver CS5.5/Configuration/DocumentTypes/MMDocumetTypes.xml (Editing this file didn't do anything for me, so you need to change the file above instead)
    <documenttype id="JSP" servermodel="JSP" internaltype="Dynamic" winfileextension="jsp,jst" macfileextension="jsp,jst" file="Default.jsp" writebyteordermark="false" mimetype="text/html">
    Replace with,
    <documenttype id="JSP" servermodel="JSP" internaltype="Dynamic" winfileextension="jsp,jst,jspf" macfileextension="jsp,jst,jspf" file="Default.jsp" writebyteordermark="false" mimetype="text/html">
    2. Edit the /Users/YOUR USER/Library/Application Support/Adobe/Dreamweaver CS5.5/en_US/Configuration/Extensions.txt
    In the All: section on top add the jspf extention right after jsp in my example it looked like this
    and I added the jspf and it looks like this now,
    That's it, Quit Dreamweaver and open it up again. Open the .jspf file and see the color coding (syntax highlighting)
    Hope this helps you and seves you time figuring it out. If this helped, do a good thing, next time you figure something out, tell others about it to save their time too, like I did. Enjoy.

    TheGrandNabib wrote:
    I don't seem to have a user Library folder, my only Library folder is on the same level as my Users folder.
    From Locating your personal configuration folder in the Dreamweaver FAQ:
    In Mac OS X (Lion and Mountain Lion), open Finder and press Shift-Cmd-Go. Type ~/Library/Application Support in the dialog box, and click Go. You should then be able to find the configuration folder.

  • Need help importing files into Dreamweaver CS5.5

    Currently I have website that is hosted on  . This site was created by another person that is not available to help with my problem. I am attempting to modify or edit this website using Dreamweaver CS5.5 and having difficulties loading the files into Dreamweaver.
    First, using Filezilla I downloaded all the files and folders to my PC. At this point, I am stuck and cannot figure out how to upload or open the files and really need some advice. I read the Adobe help section on "importing" and it describes a .ste file. I searched the download folder and cannot find any file (*.ste)
    I am hoping to salvage the site and not have to reinvent the wheel and start over. Any advice would be extrmely helpful........Gary

    Thanks for the quick reply.
    Your comments raised some new questions. Let me update all on where I am. First, I am able to connect to GoDaddy server via the the local and remote views in the bottom right corner of DW. I see the file folder structure on GoDaddy. I can also see the file structure on my local hardrive that I copied using filezilla. Although, using the server connection I notice that I can download the files using this connection now. Should I delete what I did via filezilla and start over using the romote server connection? One more problem. I have content for two (2) websites on the remote server. This is in addition to the listed in my original post. Although, it appears the other website content is in a seperate folder. I assume that I will need to separtate this content somehow. At least link to it when I begin to start to create a .ste file for each site.
    I started to read the article "Creating your first website"in your post and should be very helpful. I did run into a little road block.
    I created (2) site names and linked to the appropriate folder on my hard drive. Although, I do not have: "check_cs5" folder on my local or remote folder. What does that mean? Should I create one?

  • Hp laserjet flow mfp m525c will not scan to a network shared folder in our workgroup

    we have set up a small office network and can access shared folders between computers, but the new hp laserjet flow mfp m525c multi-function printer cannot scan to any of these shared network folders. the printer has an embedded web server that i can access from my desktop and i can print documents but the printer verify a valid file path to my shared network folder.

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Shared folder files open as read only even though they are set up as read write

    Hello, I've recently purchased a iMac to work alongside my mac book pro. Primarily, i want this for ease of use at home and as a 'back up' to my pro should anything happen.
    I have a number of folders and files on my pro that I wish to access on the iMac and have set up shared folders to enable this with a new profile and read/write permissions. This all works fine until I open the document, make changes then find that I have to save as a different name as the files open as 'read only'?
    Is there anything I've missed? I would of expected 'read/write' permissions to enable me to save files as edited?
    Any help appreciated otherwise, I'll have to resort to copying files between machines which would be a major dissapointment!
    Thanks in advance

    Found the solution...basically the permissions are not automatically cascaded down to sub folders and files so you have to do the following... modified from
    On the folder that you would like to change, select the Get Info and then click on the cogwheel at the bottom of the Get Info dialog.
    Click on the menu pick "Apply to enclosed items ..." and confirm the warning message.
    Then the same read & write permissions are applied to all the subfolders of the selected folder.

  • Why is iMac being dropped as a shared volume?

    I have a 21.5" iMac 2.5GHz mid 2011, 12GB ram running Lion 10.7.4.
    It is connected via ethernet to a gen 5 Airport Extreme, so Airport on the iMac is off. I am also running a MBP .
    Both are on iCloud Back-to-My-Mac. When the iMac is awake, it shows up on the MBP as a shared volume. After it goes to sleep, it disappears as a shared volume. Wake for network activity is checked on the iMac.
    I don't remember having this problem before. The only thing I have changed is that I had been using a 1st gen Airport Extreme and upgraded to this 5th gen.
    I've checked everything I can think of but the problem persists.
    Anyone have any thoughts as to why the iMac keeps disappearing?

    I figured it out-  it must be the printer.
    OK, here's another question.  Ever since I installed Lion, Flash Player doesn't work at all.  I've reinstalled it, de-installed it, changed settings, reinstalled again, numerous times.  Nothing works.  What am I doing wrong?

  • How can I create a rollover drop down menu from a link in Dreamweaver CS5?

    Hello all,  I am working on a portfolio website and I was just wanting to know if there is any way that I can create a drop down menu from a text link that cascades once the cursor has made contact with the link. I would like to have it in my navigation bar where the Portfolio link is. Basically, my navigation bar looks like this : Home | Resume | Portfolio | Contact. I only want three items on the drop down menu beneath the portfolio link: Traditional Art, Photography, Graphic Design. I would really appreciate any help I can get! Thanks!

    Have a look at what Nancy does

  • How can I set Fire FTP to open a .less file in Dreamweaver CS5?

    I have it set so that double-clicking a file will open it in a particular programme.
    For example, double-clicking a .css file will force Dreamweaver to open the file.
    But I do not know how to make Dreamweaver open a .less file.
    Anyone any ideas?

    Addons are developed by third party developer. you can contact FireFTP developer

  • Please, Help me.. !!  ((Can not support NAS or shared folder ? (Application Directory)))

    I need to set up application directory in NAS or Network
    Shared Folder.
    How can I do that ?
    In the fms.ini file.
    VHOST.APPSDIR = z:\myapps => z:\ is shared folder
    Application directory does not exist : z:\myapps
    please, I want to fix the problem..

    I have the same issue. My NAS is CIFS mounted and I can only
    access it using a specific user. The thread below suggests that I
    may have to change FMS to run under that user, but this doesn't
    look easy. I'll let you know how I get on. ssid=4394726
    This isn't a rare setup - can anyone provide better

Maybe you are looking for

  • Help! My MacBook Pro won't go online

    My MacBook Pro is connected to my home's wifi, but it doesn't go online. Every time i try to use safari it just stays blank, it won't go to any website. My family's PCs work just fine. I already tried from restarting my Mac to disconnecting my router

  • New HP PC will not properly recognize any mouse

    I have a relatively new HP Pavilion HPE h9-1100z Phoenix CTO Desktop PC running Windows 7 Home Premium (64) that I bought a few months ago. In the last week, my mouse stopped working. It is whatever wireless mouse came with the computer. The keyboard

  • Remove "apple -mac os x" url from dock

    How do I do it? There has to be a way. I already have the shortcut in Safari I don't need it in the dock.

  • WebVPN Tunnel-Group Aliases and URLS

    Hi, <br /> <br />I have a requirement to create a new group policy and a new tunnel-group and apply it to a webvpn user account <br /> <br /> <br />The web vpn is working fine without any issues when I give a new name under Group Aliases and URL <br

  • Will a mac pro 13 inch come out with retina display

    will macbook pro 13 inch come out with retina display