Subcontracting challan Print Out Perview

Hello Everybody,
I want to take print out of subcontracting challan.For that while creating subcontracting challan i am selecting print immediately option. What system is doing while saving this challan system creats spool request automatically. But my requirement is i just want to preview subcontracting challan print out.How can i achieve this.
Regards
Vivek

Hi
Please that for the message output you have requested processing as 4- send immediately and in the communciation you have ticked print immed.
Sunny

Similar Messages

  • Text in Subcontracting Challan Print Out

    Dear Experts,
    We have a problem, when we make subcontracting Challan thru J1IF01, and maintain text in option, subcontracting challan, subcontracting norms, shipping instructions, nature of processing etc. But it is not reflecing in the challan printout (J1IF11).
    Kindly suggest what to do so that the text details will appear on the printout.
    Full points will rewarded on helping answers.
    Thanks in advance.
    GR.

    Hi,
    The same problem I had faced in the past.
    I had done it on trial & error basis.(I don't remember exactly)
    Goto TEXT tab, check all the options in that tab, any one frm it will work for you.
    Try it.
    Regards,
    Piyush

  • How to take sub-contracting challana print out

    Hai friends,
    How to take sub-contracting challana print out.
    Where i have to do the message settings for taking return delivery excise document print out ( rejected RM  material return to vendor ).
    Please guide me.

    Hello,
    During creation of 57F4 Challan in J1IF01, in Basic Data Tab Page, scroll down the screen, you will get a check box of "Print immediately" just activate it before saving, it will print the Subcontracting challan once you save it.
    And to re-print the same go to J1IF11 and activate this indicator again and save.
    Configuration Checks: -
    SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Subcontracting Attributes > Check whether Subcon Output Type - J1IF is maintained here.
    Also check in M706 - For Output Type - J1IF should be in place.
    Note: - There is no need of maintaining condition record for output type J1IF in MN21 and also no need to do any further configuration.
    Maintain printer in the SPRO - IMG - MM - Inventory management - Output determination - printer determination.- printer determination by plant / storage location ( OMJ3). Here for the application area ME, condition type J1IF, assign the printer.
    regards,

  • Error in sub-contract challan print out..?

    Hi gurus
    Can anybody explain me how to rectify the error
    "vendor record is missing " in Sub-contract print out in J1if
    Thanks sap-mm

    J1IF is output type for Subcontracting challan. Check the script with the help of ABAP er.

  • Subcontracting challan print preview problems

    Hello sir,
    i am having a problem  when i create subcontracting  challan from j1if01 for a vendor 'S'  item 'x'.
    material details for 'X' is shown for vendor 'S' in challan print preview.
    again when i crete second challan from j1if01 for the same vendor 'S' item 'y'
    material details for 'y' is not shown for the same vendor 'S' in challan print preview.
    i have maintained chapter id for both material.
    regards
    sanjay

    Hi Sanjay,
    Your problem is not clear. IS it that you have two materials in BOM and you are transferring these two materials to the vendor but only one item is printing and not the second one.
    Pls check your settings under logistics General> Tax on goods movement>India--> Subcontracting attributes in that EI items. What is the number selected there. If it is one it will print different challan per item.
    Regards
    Sangeeta

  • Subcontracting Challan printing after reconciliation (status assigned)

    Hi,
    My requirement is to reprint the subcontracting challan after reconciliation (status assigned).
    To reprint the challan we use the tcode j1if11 and tick print immediately. Spool is generated and we are taking printout.
    But since the challan is reconciled system is not allowing to enter in tcode j1if11.
    Please suggest how to get print in this case.
    Regards

    Hi,
    Thanks for the reply.
    But this is business requirement in case if the challan need to be resend to vendor if the original copy is lost or business reporting is reqd or any other case.
    Please suggest..................

  • Sub-Contract challan print out

    Hi All,
    Can any one give the T.Code for printing the Sub-Contract challan?  I know that most of the org. will use Z program/t.code to print the challans, but I am sure there must be SAP (CIN) std T.Code for printing the same.
    Regards,
    Mani

    Hi Seshagiri,
    Thanks for the response..
    As you suggested, we can print, while creating the challans, however, I would like to print the challans, which were created already (may be second, third time)  Is it possible?
    Regards,
    Mani

  • Subcontracting Challan Printing

    Dear all,
    I am using standard form 57FC.
    While Printing "Nature of Processing" is not appearing even after entering in TEXT of J1IF01.
    Please help
    Regards
    amey

    Hi Amey,
    Normally We have gone for development to cover all legal aspects of 57F4 challan.
    But 1 thing which I have normally faced is the 'Nature of processing' field was not selectable most of the times. So I used other field to fulfill the requirement.
    Regards,
    Piyush

  • Standard O/P Type for Subcontract Challan PO

    Hi,
      For Subcontract Challan print out we have a made a seperate transaction code , but i want to know which is the std. o/p type for Taking the print out of Subcontract challan, like for po NEU is there   , so which is the o/p type is for taing the subcontarct challan print out  can u give the program name and form which is use for it.
      regards,
        zafar

    Hi,
    Standard Output type for SUBCONTRACT CHALLAN is J1IF
    You can give the Print for the subcontract challen in J1IF01 transaction, enter the Excise group and series group
    In the next screen you can find print parameters
    regards,
    santosh

  • O/P type configuration for Subcontracting challan

    Hi,
    As per our requirement we have created a separate print transaction for Subcontracting challan print out but i want to know what is the T. Code for taking print out of subcontrating challan also what is the standard o/p type for subconracing challn print out how to configure it and how to assign it to Plant and default printer.
    regards,
    zafar

    Please confgure an output device in transaction OMJ3 for the output type                     
    J1IF. Do not maintain any storage location for the plant, you may leave                      
    the SLOC column blank.                                                                       
    These are the settings you will have to check:                                                                               
    > Check if you have assigned the output type to the Output Determination                                                                               
    > Check if the output type has been assigned in the subcontracting              
    challan attributes. The output type for subcontracting challan is J1IF.                                                                               
    > Maintained the condition records.                                                                               
    > Set the partner function, medium of print etc in Maintain Output              
    types.                                                                               
    > In transaction OMJ3 you have not maintained printer determination             
    for J1IF for plant and storage location. Please maintain one for all            
    the relevant plants & a blank storage location.                                                                               
    Maitain the following data:                                                     
    J1IF > 2100 > Blank > output device > j1if                                      
    I hope this helps
    Vijayesh V V

  • Multiple selection to print subcontracting challan

    Hi Gurus,
    Is is possible to have multiple selection of subcontracting challan for printing it at once similar to what we do in T code MB90 for Material Document printout.
    Regards
    Mascot

    You do not have multiple option in J1IF11/12 as in MB90 to take multiple print out.You can take only one print at a time for sub con challan.
    But with any custom process you can try it.

  • Out put of subcontracting challan

    Hi Gurus
    I am facing a problem.
    I have configured diff output type for my two plant to print subcontracting challan & same i have assign in CIN setting subcontracting attributes.
    For J1IF it is working i am able to print subcontracting challan but i have created same out put type ZJIF & assign to another excise group but it is not working.
    Please advise

    Hi,
    This FM Converts OTF format to various formats (TLINE table). TLINE displays SAPscript: Text Lines
    Regards,
    Pavan

  • Unable to print Subcontracting challan

    Dear all,
    I have created a subcontracting challan with J1IF01. now when i want to take a print out, i tick on print immediately in J1IF11 and save it no print out is generated. where as same is okay with my other plants. please help
    regards
    Ashish

    1.Use Tcode J1IF11 - display subcontracting challan. Header - postinmg tab - flag the check box print immediately & save. You can take print out.
    2. Maintain the Outout type J1IF for the excise group - SPRO - IMG - LOgisitics general - Tax on goods & movements - India - Business transactions - Subcontracting - Maintai subcontracting attributes
    In addition to that
    Maintain printer in the SPRO - IMG - MM - Inventory management - Output determination - printer determination.- printer determination by plant / storage location ( OMJ3). Here for the application area ME, condition type J1IF, assign the printer .
    IN OMJ3, maintain the J1IF sondition type, plant, Printer in output device & flag the check box Immediately & released.
    Print immediately
    Switch for printing immediately. Printing is immediate if this switch is set. Otherwise the output is held in the spool.
    Release after output
    Switch for deleting a print job. If the switch is set, the spool job is deleted immediately after printing. Otherwise it remains in the spool file after printing and can be printed again if required.
    hope this helps

  • Challan Printing for Subcontracting

    Hello,
    Do we have a SAP Standard SAP challan for subcontracting print out put?
    Where would i find it?How would i set it up and where?
    What tcode would i use to print it?
    Thanks a bunch
    SK

    dear SK,
    When you create SC , in the header you have print option. It is not visible untill you scroll down the screen. I exactly did not remember in which screen but check the header screens & find the check box
    thanks,
    krishna Reddy

  • Printing of subcontracting  challan

    Hello Experts
    Pl guide me how to print the subcontract challan after reconcillation.
    Thx
    Umesh

    Hi,
    Check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Subcontracting Attributes > Check whether Subcon Output Type - J1IF is maintained here.
    Also check in M706 - For Output Type - J1IF, under "Print" Tab Page, what is the Print param., if it is "7 Plant/storage location" then go to OMJ3 and mainatin the entry with J1IF/Plant/Storage location (keep it blank if all the sto locs of plant are to be considered)/Output Device/Name/Print Immediately/Release after output
    Also check condition record for Output Type J1IF in MN22. If not there then mainatin it.
    Note: - It is better to have Condition Table with "Plant" and a new access sequence needs to be created with this table and assign this to J1IF in M706. So condition record maintenance will be easier.

Maybe you are looking for