Subcontracting ISSUE(any standared is available)

HI All
Im doing subcontracting process.Im facing 2 problems here im not finding any SAP std to restrict this 2..plz give help how to do..
1)Im doing MB1B(541 MOV TYPE) With respect to PO number.vendor automatically fetches from PO,but system allows to change vendor number in MB1B.How to ser that field as display..it is not available in screen layout.
And they dont want to do this usinh ME2o,they want olny in MB1B.
2)while doing MIGO system allowing to change component quantity(543 mov type), users entering more quantity than BOM.client want to restrict it..
BOTH I cont set display field..HOW TO DO IN STD SAP plz help.
or I have to set user exit for both,IF, Any standard user exit available for both problems???????????/
plz help me
thanks
ramesh reddy
Edited by: ramesh9632 on Jan 7, 2012 6:49 AM
Moderator message:even asking several time the same question does not change SAPs standard design.
You got your answers already:
Edited by: Jürgen L. on Jan 7, 2012 2:20 PM

Hello Mohit,
This is a technical snag in SAP. When you create a Subcon PO, a requirement is generated in MD04, thus showing expected issues. When you do a delivery by ME2O, these requirements are subtracted from existing stock and the remaining stock is shown as available, or picked in delivery. This happens because the Subcon PO and delivery created are not linked to each other in terms of requirement planning. There are some SAP notes, which highlight the issue and possible solution..see note number 458606 and 323991.
Example:
PO requirement of Component B - 10 units
Available Units in UnRes use - 10 units
Requirement shown in MD04 for subcon PO - 10 units
Qty picked in Delivery - 0 units
Requirement shown in MD04 for subcon Del - 10 units
PO requirement of Component B - 10 units
Available Units in UnRes use - 15 units
Requirement shown in MD04 for subcon PO - 10 units
Qty picked in Delivery - 5 units
Requirement shown in MD04 for subcon Del - 10 units
There is no definitive solution. We handled the situation by creating a availability rule with no check for Subcontracting delivery. Hope this helps..Reward, if useful
Regards,
VS
Edited by: VS on Aug 5, 2008 6:10 PM

Similar Messages

Any widget / component available to support flow type model

Hi,
Anyone knows any widget / component available to support flow type model. For example... the flow should be shown in the below model, where '0' represent the node and lines represent the flow [$ used to fill the shapes in the forum to avoid formatting issue]...
$$$$$ *0---------0---------0*
$$$$ */* $$$$$$$$$$$$$$$$$$ \
*0----0---------0------------0-------0*
$$$$ \ $$$$$$$$$$$$$$$$$$ /
$$$$$ *0---------0---------0*
Edited by: user13419369 on Sep 13, 2012 10:30 AM

Have you using [url http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_train.html]af:train
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/index.jspx#%2Fcomponents%2Ftrain.jspx
-Arun

After purchasing the Auto-Renewable subscription, the latest issue did not become available

Hi, I have a problem with my app: After purchasing the Auto-Renewable subscription, the latest issue did not become available for download/reading.
These are the steps I done:
1. I selected one of the options for subscribe
2. Gone through In App Purchase
3. After going through the In App Purchase, app updates the library
4. After updating the library, the latest issue, is not available for download. It still has "Buy" button
The ios certificates seems ok (redone many times), same steps of other 3 apps I already done.
The In-app purchase Product ID are the same in the iTunes Connect and in the app through Viewer Builder (latest version with v19 tools)
In Adobe dashboard the shared secret are set properly, paywall disabled
Somebody had the same problem and can help me? I don't know really what else I can do
Thanks in advance

Today in iTunes Connect create a new in-app and auto-renewable subscription with a new id, rebuild the app with v20 tools and the new in-app purchase ids, delete the free issue and the in-purchase issue in the adobe dashboard and upload from my original indesign files again (the free with date for pubblication yesterday the other with today date), tested all in the sandbox and... everything works fine, after the subscription purchase the button became "download". I was happy and I sent the new app to Apple again (fourth time) for the approval. After only few hours later Apple start the review (this was amazing because it usually takes at least 5 days). One hour later I receive the "reject" state again
After purchasing the Auto-Renewable subscription, the latest issue did not become available for download/reading. Please see below for the steps to reproduce the issue:
1. Launch app
2. Tap Subscribe
3. Select any of the options for subscribe, for example, 3-month subscription as shown in the screenshot 0496
4. Go through In App Purchase
5. After going through the In App Purchase, app updates the library
6. After updating the library, the latest issue, in this case 327 - Maggio 2012, is not available for download. It still has "Buy" button as shown in the screenshot 0497
Now the question is: why on my 2 ipads worked well but apple find again the same error?
Where's the problem? I really need help from some Adobe experts, the "Gold support" don't really support me at all... I wrote a long email with all the details and the answer was one line and after my answer they disappeared ...
In this case unpublish folio and change publication date manually from folio producer and then republish it.
Please follow below link:
http://helpx.adobe.com/digital-publishing-suite/kb/subscription-fail-ios-renditions.html

I want to connect my Mac Book Pro to the internet in France without any wifi connection available? Mi Fi? Sim card?

I want to connect my Mac Book Pro to the internet in France without any wifi connection available? Mi Fi? Sim card? All we have is a phone signal in this rural French location. I want to be able to Skype to states from there. We have a friend with a 3G ipad who uses an Orange sim card to do it. I would rather not have to buy an Ipad.
thanks

I found out that the data package for one month useage with MiFi is 1G. How many minutes of online time does that correspond to?

Is there any Function module available for GR IR for purchase order

Hi
Is there any function module available in SAP to get the list of Goods Received and Invoice Reciept for a purchase order.
One way to create a custom fuction to fetch the details from MSEG and BKPF.
Can somebody suggest a better solution.
Thanks in advance.
Ruhi Hira

Which table in BAPI_PO_GETDETAILS exactly has these information ?
PO_HEADER_TEXTS
PO_ITEMS
PO_ITEM_ACCOUNT_ASSIGNMENT
PO_ITEM_SCHEDULES
PO_ITEM_CONFIRMATIONS
PO_ITEM_TEXTS
PO_ITEM_HISTORY
PO_ITEM_HISTORY_TOTALS
PO_ITEM_LIMITS
PO_ITEM_CONTRACT_LIMITS
PO_ITEM_SERVICES
PO_ITEM_SRV_ACCASS_VALUES
RETURN
PO_SERVICES_TEXTS
EXTENSIONOUT
NFMETALLITMS
Regards
Ruhi Hira

I cannot run iPhoto after update to Yosemite. I cannot update iPhoto because the application store does not have any iPhoto update available. Anyone can advice how to overcome this hassle?

After update to Yosemite 10.10.3 the iPhoto program icon is banned and there is an error message that an update is required to run iPhoto, but the application store shows a message that iPhoto does not have any update available at this time. There is not even any iPhoto program available on the application store. Any suggestion on how to solve this annoyance?

mende1 wrote:
Unfortunately, Apple has removed both iPhoto and Aperture from the Mac App Store so they cannot be downloaded anymore. This means you are forced to migrate to Photos (included in OS X 10.10.3) or, if this app does not include features you need, look for a different app.
Not true. Apple has removed both Apps from App Store so you cannot buy them anymore. But if you have any of these Apps already purchased in the past, then you can still download them on your Mac.
Aristotle247 wrote:
After update to Yosemite 10.10.3 the iPhoto program icon is banned and there is an error message that an update is required to run iPhoto, but the application store shows a message that iPhoto does not have any update available at this time. There is not even any iPhoto program available on the application store. Any suggestion on how to solve this annoyance?
Open App Store, sign in with your Apple ID and go to Purchases tab. If you see iPhoto app listed there close down the App Store and do this steps as this is what worked for me:
Open Finder and go to Applications folder.
Locate iPhoto app
Drag iPhoto app from your Applications folder to Trash (NOTE: Do not emptied Trash yet)
Open App Store app and navigate to Purchases tab.
Click on Install button which is next to the iPhoto app (on the right hand side).
Once iPhoto is downloaded again, test it if its working for you. If all is ok, you can remove your Trash.

Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

Install NTFS 3G
http://macntfs-3g.blogspot.com/
If you were going to be reading and writing to a NTFS System Partition, you might have to worry about the instability messing up the operating system. However, you are reading/writing from a non system, backup device so you don't have to worry about screwing up an operating system.
I would still temporarily move my data to another device and reformat the drive for Mac OS X Extended.

New to macbook pro and have msmoney files (mbf) stored on an external hard drive. I want to transfer them to MoneyWiz and need to convert them to qif. Does anyone know of any free software available and how do I do it. Thanks.

I am new to macbook pro and have msmoney files (mbf) stored on an external harddrive. I want to transfer them to MoneyWiz and need to convert them to qif. Does anyone know of any free software available and how do I do it. Thanks.

iTunes>Preferences (Cmd+,)>Advanced
Choose the Ext HD (and the appropriate folder) as the location for your library.

I have recently upgraded my iMac to 10.6.8 and now find that the upload photo to Facebook facility no longer works. I have reset Safari but this has not resolved the issue - any suggestions?

I have recently upgraded my iMac to 10.6.8 and now find that the upload photo to Facebook facility no longer works. I have reset Safari but this has not resolved the issue - any suggestions? I can click on the "upload photos/video" field and it takes me to Finder to select the photo - but on selecting the photo, the Finder screen disappears as normal but from then on nothing happens.

From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Now empty the Safari cache.
Back to the menu bar, click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Quit and relaunch Safari then try Facebook.
If that doesn't help, it may be a Safari extension preventing you from uploading content to Facebook.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Is there any system table available to check no. of entries in the table?.

Hi
Is there any system table available to check the no of entries in the table.
Note : the table may be whether SAP table or Z-table.(All tables)
Regards
Raja.

Hi Raja,
I don't think so. Instead, try to perform
SELECT count(*) FROM dbtab.
...to get the number of records of the table dbtab.
I hope this helps. Kind regards,
Alvaro

Are there any other templates available besides those that come with numbers?

Are there any other templates available besides those that come with Numbers?

Hi David,
If you have Numbers '09 there is a Checking Register template that might suit.
Numbers can open Excel templates and documents. Do a web search for checking register spreadsheet.
Regards,
Ian.

Authentication failed because Outlook doesn't support any of the available authentication methods.

When attempting to check and send email from my Mac via iCloud, I keep getting the error "Authentication failed because Outlook doesn't support any of the available authentication methods." I have change just about everything I can see available, but continue to get this message.
I am able to send email via iCloud using my .Me and .Mac adresses, and that tells me that it is not able to store "sent emails" on iCluud and will store them loaclly on my computer. I can handle this, but whem going to iCloud Web page haave nothing withing the "sent" mailbox.
Using OS 10.7.2, and Outlook 2011 version 14.1.3
Thanks in advance......

I got the following from the microsoft Web site. Also, the SMPT port must be overwriten. Use port 587
This article contains information about the compatibility of Microsoft Outlook for Mac 2011 and Apple iCloud. Outlook for Mac 2011 does not support Apple iCloud calendar (CalDAV) and contact (CardDAV) synchronization. Outlook for Mac 2011 does support iCloud Mail. For steps on how to configure your iCloud email account in Outlook for Mac 2011, go to the "More Information" section of this article.
To configure your Apple iCloud email account in Microsoft Outlook for Mac 2011, follow these steps:
Start Outlook 2011.
On the Tools menu, click Accounts.
Click the plus sign in the lower-left corner, and then select E-mail.
Enter your E-mail Address and Password, and then click Add Account.
Note: The new account will appear in the left navigation pane of the Accounts dialog box.
Enter one of the following in the Incoming server box:
mail.me.com (for me.com mail addresses)
mail.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Incoming server box.
Enter one of the following in the Outgoing server box:
smtp.me.com (for me.com mail addresses)
smtp.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Outgoing server box.
After you have entered the incoming and outgoing server information, Outlook 2011 will start to receive your email messages.
Note: You can click Advanced to enter additional settings, such as leaving a copy of each message on the server.

Is there any standard BAPI available to vendor , customer and G/L ?

Hi all,
any standard BAPI available to vendor , customer and G/L? I found BAPI_CUSTOMER_CREATE and BAPI_VENDOR_CREATE but when i traying to execute , then control directly taking to XD01 and XK01 initial screen's .i need to create vendor and customer master data using BAPI(data will come from legacy system).
Other than these , is there any standard BAPI available .Pl tell me
Regard's,
Pratap.

Hello Pratap
For customer the following BAPI is available:
BAPI_CUSTOMER_CREATEFROMDATA1
"This fm uses a reference customer as template for the new customer.
" Using this BAPI you cannot create a new customer from scratch
Regards
Uwe

Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?

Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?

There is another setting for "Start Conversation from", that needs to be set to phone number.

Whether any bapi is available or not for infotype 0019(monitoring of dates)

Dear abapers,
can u plz guide me whether any bapi is available or not for infotype 0019(monitoring of dates)
i need to upload data from the text file to sap with the following fields.
*Pers No.     *
*Task Type     *
*Date Type     *
*Processing Indicator     *
*Reminder date     *
*Lead/follow-up time     *
*Lead/follow-up time     *
Comments
regards,
manoj

Hi,
Use this FM HR_INFOTYPE_OPERATION
Regards,
Shan

Subcontracting ISSUE(any standared is available)

Similar Messages

Maybe you are looking for