Submitted my podcast (The Maggy Thump Show) to itunes a month ago, haven't heard from them. Is this typical? Any info/suggestions would be greatly appreciated. Thanks
Hello! I submitted my podcast (The Maggy Thump Show) to Itunes about a month ago, I
haven't received any correspondence yet. Is this typical? Please help! Any information,
suggestions would be really helpful. Thanks
Hey braswell4AU: I have a similar issue. I purchased 2 iPhone 5's the first day they came out. Black 64gb for myself and white 32gb for my wife. She is having somewhat the same issues as you have. Wifi is weak and keeps dropping the signal, and also her phone almost never has LTE. And we are in a very strong Verizon LTE area in north Los Angeles county. My phone has never had any signal issues, wifi or LTE. I have been researching the issue to no avail. I though maybe the white with the brushed alluminum may cause signal issues, but haven't found anything on that and posts about the black one haven't problems blew that theory up.
I have also changed the SIM card and the phone itself and still the same problem. I saw a post about someone getting their phone swapped out and the apple rep told him not to restore the phone, but to just set it up as new. I have yet to try it, gonna try this weekend.. But it makes sense! I, like you have 6 apple devices (2 iPhone 5's, 2 iPhone 4's apple tv3, and the ipad3) and have no issues running all my devices via router.
So I am thinking about the history of the restores and backups and my wife is the only one that went from the 4 to the 5.. Every other device was setup as new. So my theory is that he iphone 5 has issues when you restore from previous backups.. Maybe something a little different from the backups of the previous models create issues in the iPhone 5's?
Like I said, I'm going to give it a shot this weekend and see what happens. If you get a chance to try this before, please let me know if it works and if I try before you I will update you.
Good luck and hopefully we can get these wonderful phones working like they should!
Nate
Similar Messages
-
My iPhone 4S is not showing up in iTunes. I've never had this issue before, and I'm finding it a little frustrating trying to figure out how to rectify the situation. If anyone knows how to fix this problem, please advise. Otherwise any suggestions would be greatly appreciated.
Hi Josie,
I understand that you are having issues with iTunes recognizing your iPhone 4S. Let's see if we can tackle this.
The following resource will provide helpful steps in resolving this issue, pay specific attention to Steps 3-6 as these usually resolve this sort of issue.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M. -
All my photos are importing out of order. For example, if I have images 1,2,3, and 4.., the order they show up in is 2,1,4,3. What could cause this and any ideas how I fix it?
One thing, don;t think of them as being imported in any one particular order.
The order of the images is completely fluid, you can change it anytime you want to suit your needs at that particular moment.
As Léonie showed you select the order you want to see the images in by selecting the item you want to sort on in the pull-down.
The only time fluid sort order can be a problem is when you export groups of images. If you put the images into a particular order in Aperture when you export them and view them in the Finder the order they are in may very well be different. In this case you could give names to the images that include a sequence number or index.
Then when they are viewd in the Finder they will be in them same order they were in in Aperture.
regards -
hi my ipod touch 8gb won't turn on just get the apple sign in middle of screen and my laptop also can't find my ipod wen i plug it in? any help would be greatly appreciated thank you.
OR use this method
1. Press-hold the Home button (big circle below the screen)and the Sleep/Wake button (on top of the iPhone) simultaneously.
2. Continue holding both buttons (Ignore the"Slide to power off") until the iPhone shuts off and begins to restart.
3.You may let go when you see the silver Applelogo.
Thats all Folks!! -
- the airplay icon is completely gone! I've reset apple tv, checked home sharing is on, checked my wifi connection is active, no firewalls, but still no luck? any suggestions would be greatly appreciated:)
What IOS and OS are you using Elissa. I think from your post it used to work but has dropped off, is that correct or has it never worked? If it did wotk has anything changed? Check your wifi use with sopmething like istumbler to see if it is being used by neighbours etc?
-
My iPad 2 won't charge and it's completely shut down. I've tried pressing the two buttons simultaneously, but nothing works. It's driving me crazy! Any offers of suggestions would be greatly appreciated. Thanks!
1. The most efficient way to charge an iPad is with the charger that came with the iPad and having that plugged into a wall outlet. Trying to charge while connected to a laptop often doesn't work because the USB port may not provide enough power.
2. Once an iPad battery has completely drained it may take an hour or more on the wall charger before the iPad responds. So after an hour on the charger reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
3. If the iPad still does not start up make an appt at the Apple store. It will be far better if you have an appointment rather than just walking in because those with appointments will be taken care of before you are. -
It seems like my wifes iphone is not holding its charge like it should, i just finished trying to enhance the battery life , i just noticed this tonight, any help i would really appreciate. Thank you.
Respect4LERead this
Charging
Battery Life -
I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page, but I can't work out how to do it - any suggestions would be greatly appreciated
brendanfromsydney wrote:
What are the different opinions on why pages should not achieve this?
As far as I know, Apple is free to choose to offer this or that feature.
They never said that they want to clone Word or even compete with it.
Differences between tables in both worlds are numerous.
In Pages (or Numbers)
- we can't sort a single column
- we can't sort by row
- we can't insert or remove a single cell
- a cell can't cross pages boundaries
If I understand well these design choices match :
++-+-+-+-+-+-+-+-++
Apple Human Interface Guidelines:
Apply the 80 Percent Solution
During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
+-+-+-+-+-+-+-+-+-++
Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
ive just updated itunes and now i cant view any items in the itunes store, all that appears are the names of the songs or films under blue boxes, any ideas would be greatly appreciated thanks
are you signed in? do you have an account setup with itunes store?
did you authorize the computer? -
iTunes shows the iPod is connected but doesn't show it in the drop down menu under Devices, and the "sync" option is grayed out, so I can't sync the nano with iTunes. I ran the diagnostic tests and it shows the device is connected, but it failed the sync test - it said nothing was connected, even though it passed the connectivity test. We've had the iPod for a few months but this is the first time we've tried to do anything with it. It's fully charged but just won't sync. I turned it off, turned it on. I reset it. I restarted the computer. I'm not sure where to go from here.
A couple of things to check:
Are there any backups listed in iTunes/settings/devices? Since backing up is the first step of the sync process, iTunes might be stuck trying to read the content of the last backup in order to replace it with the new one.
Copy the whole backup folder to a safe place, delete the backup from the list afterwards and make sure that the folder has no content after that. The folder is located here:
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
If you do not see the AppData or Application Data folders, you may need to show hidden files
After that, make sure autosync is disabled in iTunes, connect your ipod, right click on it in the device list and choose "backup". If you can backup manually, transfer your purchases the same way, to copy apps and purchased media to your iTunes. If this worked, you should be able to sync again.
To speed up the sync process, copy your photos to your computer prior to the sync and delete them on your ipod before you start.
Message was edited by: Ingo2711 -
i did the ios 5 upgate for my iphone 4 and can no longer view the pics i take in the camera app or camera roll in photos. nothing lets me see them the page just goes to no photos or video but i can see the last pic i took in the little box in the corner in the camera. does anyone know how to fix this problem and make it work normal again. thanks
Try a reset of the device by pressing and holding the home and power button for 15-20 seconds until the white Apple logo appears.
-
I am no longer able to iTunes wi-fi sync since I upgraded to the iPhone 5. When trying to connect, it stays in the discovery mode and never connects.I have to try and pair them all over again. Then I get a message saying that my Mac Book Pro is not supported. Can anyone assist me in resolving this issue. It is an early Mac Book Pro 10 I believe. I purchased it in February of 2010.
I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it. -
Please Help!
If the steps on the support site failed to correct the issue, it notes that the issue is likely hardware related with the iPod's hard drive, meaning you'll want to have it serviced/replaced either by Apple or a third party service.
B-rock -
For some reason the option to select switch the audio port to 'input' is not coming up.
Thanks.If your computer is running Snow Leopard, and is not at 10.6.8, you could use
Software Update to get final Combo Update 10.6.8 v. 1.1 for Snow Leopard.
Aside from that (you may have already done so) here is a free-running
application that may help your line-in audio, by the name of LineIn
http://www.rogueamoeba.com/freebies/ and it suggests possibilities.
There also are USB input methods using those for audio; not sure what
is still available, a few great ones no longer were. One from Belkin a few
years ago, called the iMic, offered great options over USB.
Hopefully the free application can help.
Good luck & happy computing! -
We have tried dozens of times to uninstall and cleanout every file. Even tried opening perms on the filerepository. Tried installing with msiec and logged. iTunes will install but AMD will not so we cannot connect the phones and pods. Any new suggestions would be greatly appreciate because we are about to give up and maybe pay somebody to try to install it which is ridiculous. I can supply the install log if anyone is interested. Thank you.
Hey thanks for replying.
Here's what I did:
First I tried the Winsock reset in the Command prompt. Nothing changed.
Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
I did the Winsock reset in the Command Prompt again and rebooted my comp.
Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!
Maybe you are looking for
-
hi in source i have 14 records, i am trying to load psa in BI. its shwoing 14-14 but still status is yellow only past 1 hr? please let me know once i deleted and loading again, still same problem,
-
In OS 10.6.8 how do I turn on printer sharing from terminal?
I have a Mac Pro and I need to share a printer, however every time I go to sharing and try to select printer sharing preferences crashes. Is there a way to turn on printer sharing from termina?
-
Problem in invoking a Webservice
Hi I am using Oracle BPEL Process Manager v10.1.2.0.0. and data base is oracle lite which comes with PM it self. as part my application i need to call the Webservice which was deployed on the local OC4J as u suggested for some one earlier i updated t
-
Regd. Creation of Port and RFC dest in PI
Hi Experts, I have two scenarios 1. file to IDOC and 2. IDOC to file. for first , i need to connect to ECC for posting IDOC. in sap side they have created port ,partner profile etc. in PI sides i created an RFC destination(sm59) ,given generic name,
-
Olap Variable different from Dev and QA
Hi, From our infopackage under Data Selection Tab in DEV, we can use the Olap var-0P_PRFP1. But we cannot see the same variable in QA. The whole list of Olap variable is a lot lesser in QA. Is there any setting for that, or we need any specific hotpa