Subpanel in LV8 scrolls beyond visible area, not in 7.1. Any fix?

Application uses a subpanel to display test results. Each subVI is a different size based on amount of data to display. In LV7.1, scrolling during program execution was limited to the visible area of the subVI's front panel. In LV8.0 scrolling goes beyond visible area. Scrolling seems limitless. Is there a way to limit scrolling to the visible area?

Sam,
Hope this helps.
Attachments:
LV71Sub.jpg ‏14 KB
LV80Sub.jpg ‏17 KB

Similar Messages

Check boxes are not being displayed in any list applets

Issue: The check boxes are not being displayed in any list applets in the system. A check box can be marked in the system, but as soon as the user clicks anywhere outside of the box the check box 'visibly' disappears. If you hover the mouse over the check box it displays a 'Y'. However, check boxes are working fine for the form applet, the issue is only with the list applet.
I verified the checkboxes work fine in the thick client and in production. However, it is the testing environment, which belongs to client, that is showing the above behavior. I think there is some setting that is missing for them. But I am unable to figure it. I would really appreciate if someone could help !!
Thanks in advance

One way that you could make it work (just tried it out again) is to use the windings font
and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
(depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
There is an example file: xdo example.cfg that you rename and change accoringly.
The font is there setup for windows 2000 as an example. Select the correct font
path - for my XP it is:
<font family="Wingdings" style="normal" weight="normal">
<truetype path="C:\WINDOWS\fonts\wingding.ttf" />
</font>
Then you can put the symbols into your RTF template and it will be rendered.
At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
I am pretty sure I tried it before with 5.5.
Didn't have the 5.5 manual with me - so I have to check what that says again..
Hope it helps,
Klaus

Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

TS1702 I can't download apps it says they are not available how do I fix this?

I can't download apps it says they are not available how do I fix this?

You're really posting in the wrong forum. you should be posting here ( https://discussions.apple.com/community/itunes/itunes_store ) Or calling apple support directly.

Since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?

since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?

A Davey1 wrote:
Not a nice answer!
Posting "Check the 'More like this'" area and not simply providing the answer is a great way to make these groups worthless.
You're ignoring context. On the old Apple Discussion Groups I never posted replies like that, instead giving people relatively detailed answers. The new Apple Support Communities made things worse by introducing certain inefficiencies. Then came Lion. The flood of messages that came with Lion required a painful choice for any of the people who had been helping here: (1) Give quality responses to a few questions and ignore the rest. (2) When applicable, give a brief answer such as the one that you found objectionable. (3) Give up all the other normal activities of life and spend full time trying to answer questions here.
People who needed help with Lion problems seemed to have trouble discovering existing message threads that described how to solve their problems. I never posted the suggestion of "Check the 'More like this' area" without verifying that the help that the poster needed could be found there. Even doing that, what I posted saved me time that I could use to help someone else.
The people helping here are all volunteers. None of them is being paid for the time they spend here. They all have a life outside of Apple Support Communities. It's arrogant of you to demand that people helping here spend more time than they already do.

Horizontal Spry Menus are not showing up in ANY browser HELP!

www.tvnewsjunkie.com
I am a novice web designer and I need help!
The above site listed is the site I am currently working on. As you can see the menu bar...is not a menu bar at all but a long list of links along the left side.
HOWEVER, when I click on LIVE VIEW in DreamWeaver everything looks fine.
There should be 7 total menu bars with 7 Dropdown menu options each (except on the bottom menu bar which there will only be 4 I believe)
What am I doing wrong??

Thank you so much for your help!This matter is certainly closed.
I just want to add, however, that somehow my Spry Assets folder was placed somewhere outside of the rest of my files! no wonder I was confused.
Thank you again!
Grant
Date: Fri, 17 Dec 2010 23:43:25 -0700
From: [email protected]
To: [email protected]
Subject: Horizontal Spry Menus are not showing up in ANY browser HELP!
You have forgotten to upload the support files - SpryMenuBar.js and SpryMenuBarHorizontal.css - to the server.
Gramps
>

Notifications are not being generated for any emails that have rules applied to them.

Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria. PLease check
1) whether your rule has trun on alert supression
2) Close the alert, craised by rule, and do it again
Roger

Updated my IOS 7 now some of my games are not work, how can I fix this problem?

I have updated my Ipad to the IOS 7 and now some of my games/apps are not working, how can i fix this or revert back to what I had before?

I'm afraid you'll have to wait until both Apple and the makers of your games/apps upgrade to new versions.
Apparently there are still some issues with iOS7 that are being dealt with and the same with some apps.
As for going back, I don't think you will be able to get this information from these forums...

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
Could any one help me out of this?
Thanks,
Rajesh

See this discussion...
https://discussions.apple.com/message/23731048#23731048

We are not getting email for any of the two new profiles in Production environment

We are not getting email for any of the two new profiles.
The new rules for sending e-mail work when using the initial profile.
Only works for F9 and choose manually the profile is being sent.
But siebel writes the log of both the \ BIN \ sent as if it had sent.
operation:
Standards (Policies) were created in the Activities (S_EVT_ACT) and Contacts table (S_CONTACT). When Standards (Policies) are reached trigger actions (Actions). These actions are linked to sending emails.

The SMTP Adapter don't just "through away" messages. If your Tracked Service Instances shows that a message was sent through the Port, I am pretty sure that a mail was indeed sent.
-Are you using Static- or Dynamic Port?
Can you try to set the Send Port in "Stopped" state, and then send a message to it. Examine the message suspended in BizTalk, and if everything looks ok, then start the Port again and check that the message has disappeared from both suspended and running
instances in the Group Hub.
If so, quickly check the mail box, make sure that no spam-filters etc. are messing up your test.
Morten la Cour

Short Slo Mo video imported to Aperture or iPhoto via cable (Air Drop not supported on my iMac): only the SloMo section imports. Not the rest. Any fixes?

Short Slo Mo video imported to Aperture or iPhoto via cable (Air Drop not supported on my iMac): only the SloMo section imports. Not the rest. Any fixes?

Okay, as I'm working through this I see that I have to add the "Admin" account to each file with "read only" permission. Simply changing the "everyone" account access does nothing.
So how do I change the permissions settings in iPhoto or Aperture to give each exported file the desired permissions? I cannot locate a setting in the iPhoto or Aperture applications.
Also, I added a password to the user account. It did not change how files are output.

Just upgraded to OSX mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Scroll bar visible but not able to scroll in custom screen for IW21

Hi,
We are using custom tab (screen exit) in transaction for creating notifications (TCode IW21). Two subscreens are configured to be embedded in the tab, combined area of which is exceeding screen size vertically. The scroll bar is visible in the tab but is not able to scroll using mouse scroll, but can be dragged up and down.
Does anyone know how to make it scrollable or make the scroll bar visible at application level (not in tab) and make it working?
Thank you,
Deepak

Hello,
Would you please implement the Methods GET_DATA to get th data from Databas to screen fields and SET_dATA to update thedata from custom screen fields to Data base table in u r case LFB1.
Regards,

Layers in my PDF which are switched to visible are not showing - how do I solve this?

I am creating MXD files in Arc GIS, and then exporting them to Adobe Professional 8. I am merging layers within Adobe Pro, and then switching the initial view so that only 4 out of the ~10 layers are visible when the PDF is first opened. However, on opening the PDF, layers which are set to be visible (the eye symbol is appearing next to them) are not visible. This is only happening for some layers, in some of the PDFs. Also, as I switch on more layers in the PDF then the layer which should have been visible but was not does eventually appear. I would be very grateful for any suggestions on why this is happening / how to solve it. Thanks.

I'm not sure if this setting exists in version 8, but check to see if Allow Layer State To Be Set By User Information is selected in the Documents Preferences. If it is not selected, Layer Properties dialog box settings, other than Layer Name and Default State, are ignored.

Push notifications for the social networking are not working. How to fix it?

Try to solve the problem of push notifications of social networking apps which are not working on my iphone 4. Fix it please..!

If you go to settings-->general-->accessibility then scroll down you'll see "increase contrast." Turn that off and your control center and notification center should become more transparent. I had the same problem and that's how I fixed it! Hope it works :)

Subpanel in LV8 scrolls beyond visible area, not in 7.1. Any fix?

Similar Messages

Maybe you are looking for