Subreport not displayed when Run from SAP Business One

We have a crystal report that displays a subreport when it is run from within the Crystal 2008 Designer but not when run from within SAP. Has anybody else seen this error? We have tried importing it into SAP and checking the connections of the report and subreport etc but to no avail.

Sastry,
The main report is a document layout with the sub report linked into it using the DocEntry key field from SAP. The subreport should display data based on that link.
This main report only has the one sub report and when you preview in Crystal it returns data, when you preview using the same criteria but inside of SAP, it is not displayed.
Thanks
Mark

Similar Messages

Issue running a report from SAP Business One

I have an issue running a particular report from SAP Business One. I am using Crystal Reports Add-On, all of the reports are working fine except one. When accessing the last page of the report or any page from inside the report the followiong error appears in the dialog box:
Error in the File CollectionDate_Branch_wise {609BA059-89AF-41E9-9AEB-28CB16D13852}.rpt:
The request could not be submitted for background processing.
Edited by: Iqbal Faisal on Feb 22, 2010 6:03 AM

Hi,
Do you mean you have a Main report that is written based on SQL Command and there are 8 subreports linked to the main report?
If that is the case, I assume when user select 'Document Type" eg invoice, it will pass that to the subreport and retrieve information?
This is how I will approach it.
1. Make sure the connection is consistent, if you are using ODBC(RDO) then make sure that is the same for main and subreport. You can check that in Set database connection. Right click on the connection, look at the Properties. Don't assume that the name is the same, eg: SBO_DemoUS, they are all ODBC(RDO) for instannce.
In Crystal, when you are using different connection, it will just prompts you a warning message and it will still run.
2. Delete all and only keep one subreport, example AR invoice and see it will still give a problem.
Replace the parameter with a set value in Record selection in subreport and see what happen.

SBO_Backup Service is not Running In SAP Business one 8.8

Hi Experts,
Here We have Recently Upgraded from SAP Business one 2007 to SAP Business one 8.8.
Previously the SBO_Backup service In Server Tools was running proberly,
But after Upgrade the Backup service is not running .
Kindly Give us your value solutions..
Regards,
M.Senthilnathan

Hi,
I Am Using Windows Server 2003 Small business Server edition.
I have checked Ur solutions.
Am running Server tools in Administrator Login only with Full Permissions.
The License manager and DI server is running Only The SBO_Backup service is not Running!!!
Regards,
M.Senthilnathan

RE: my input fields does not display when running the page

my input fields does not display when running the page
why is that so?

Hi,
Can you send the HTML code for us?
Afonso

Export Excel Documents from SAP Business One

Hello Guys,
I have been having a problem with one of our customers regarding the export of documents from SAP Business One to Excel, Whenever a user tries to export a list to Excell SBO first exports it to a txt file. I found a thread where some of you had recommended to follow the steps of this procedure in order to allow the system to export the file directly into Excel:
1. On your desktop go To: "Start -> Programs -> Microsoft Office ->
Microsof Excel
2. In Excel go to:"Tools #> Options #> General" Tab.
3. De-select the tick-box "Ignore Other Applications"
In order to de-select the "Portection from Macro Viruses"
1. In Excel go to:"Tools -> Macro -> Security"
2. Set the security level to "Medium".
Change path from 'Local' to 'Server'
1. Define the path:
a) Choose "Administration"
b) Choose "System Initialization"
c) Choose "General Settings"
d) Select the "Path" tab
e) Define a path for the Excel folder by using the Browse (...)
option
Press 'Export to Excel' to open the 'AutoOpen.xls
Make sure you change / remove the 'Local;=True' Statement accordingly,
meaning:
Excel is Starting from the server: remove the statement.
Excel is Starting from the client: add the statement.
The Excel folder should be located in a shared Folder in the server and
it should contain the "AutoOpen.xls" file.
I followed all the steps up until the step where it tells me to press "Export to Excel" to open the "AutoOpen.xls" ( I believe it refers to the Excel Export Command) however when I click the icon it does not open the 'AutoOpen.xls. Does anybody know what the problem might be?? ( I checked the AutoOpen.xls" file and it does exist in the excel folder located in the shaerd folder)
I`d sure appreciate your help guys!!

Hi Manuel,
Can you make sure your path is :
C:\Program Files\SAP\SAP Business One Server\B1_SHR\ExclDocs\
Test with this and see what is your result ..make sure you are exporting with folder with Sharing folder B1_SHR .
Hope this helps
Bishal
Edited by: BIshal Adhikari on Sep 17, 2009 11:19 AM

Push data from sap business one to ECC with XI

Hi,gurus:
Have you ever configured the scenario?We wanna push data from sap business one to ECC with XI,and vice versa.
We know that b1i have this funtion,but in our scenario,we need to create some addon table both in b1 and ecc,so does it mean that I can't use b1i in my special scenario?
We wanna utilize XI to solve our issue,then the scenario may be abapproxy to soap,or soap to abapproxy.But the problem is, how to program in the b1 side both in sender and receiver.Do you have any information about that?

Xinjiang,
The method to connect SAP Business One and ECC 6 using XI would be B1iSN2007. You could of course develop something your self using ABAP, IDoc and the Business One SDK, but B1i does this today and has 6 built in Business Scenarios. You can of course customize the existing scenarios and/or create your own much easier and faster than creating the whole thing from scratch.
If you are specifically interested in not using B1i ... you would want to post your question in the XI forum here on SDN.
Hope that helps,
Eddy

Batch Printing Of Invoices from SAP Business One

Hi,
I am having trouble batch printing invoices from SAP business one. The issue is with only one printer, on all other printer it works fine.
Everytime we try to print on this printer(HP) it prints the first invoice and prints following error on the
next page.
PCL XL error
Subsystem: KERNEL
Error: IllegalOperatorSequence
Operator: EndChar
Position: 84
Any help will be highly appreciated.

Hi,
Please try to do the following steps: (Not related to B1, but to the printer settings)
1.Open Start a Settings a Printers and Faxes
2.Right click on the desired printer and choose u2018Printing Preferencesu2019
3.In the u2018Advancedu2019 tab, change the field u201CPrint Optimizationsu2019 to u2018Disabledu2019
4.Click OK, and Exit.
Please update if it helps (and grant points ) and also if it didn't, so that we might find another solution.
Regards,
Tuvia.

Included subview not displaying when run, only in editor

Hallo -- I have a page called home.jsp that contains a subview.
home.jsp looks like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<%@ page language="java" contentType="text/html; charset=iso-8859-1" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<f:view>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Untitled Document</title>
</head>
<body>
<h:panelGrid width="100%" columns="1">
     <h:panelGroup>
          <h:outputText value="Hello?"/>
     </h:panelGroup>
     <h:panelGroup>
          <h:panelGrid width="100%" columns="2">
               <h:panelGroup>
                    <f:subview id="navigationPane">
                         <jsp:include page="subview/navigationPane.jspf" flush="true" />
                    </f:subview>
               </h:panelGroup>
               <h:panelGroup>
                    <h:outputText value="Hello-o-o-o...?"/>
               </h:panelGroup>
          </h:panelGrid>
     </h:panelGroup>
     <h:panelGroup>
          <h:outputText value="Where's my subview?"/>
     </h:panelGroup>
</h:panelGrid>
</body>
</html>
</f:view>
[/code:1:ccbd93ceb2]
And the file in the subview, named [b:ccbd93ceb2]navigationPane.jspf[/b:ccbd93ceb2] in the subfolder [b:ccbd93ceb2]/subview[/b:ccbd93ceb2] looks like this:
[code:1:ccbd93ceb2]<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<h:panelGrid width="20%" columns="1" id="navigationPane">
     <f:facet name="header">
          <h:outputText value="Navigation Pane"/>
     </f:facet>
     <h:panelGroup>
          <h:form>
               <h:commandLink id="gotoHome" action="gotoHome" immediate="true" style="text-align: center">
                    <h:outputText value="home"/>
               </h:commandLink>
          </h:form>
     </h:panelGroup>
     <h:panelGroup>
          <h:form>
               <h:commandLink id="viewByCustomer" action="viewByCustomer" immediate="true" style="text-align: center">
                    <h:outputText value="view by customer"/>
               </h:commandLink>
          </h:form>
     </h:panelGroup>
     <h:panelGroup>
          <h:form>
               <h:commandLink id="viewByJob" action="viewByJob" immediate="true" style="text-align: center">
                    <h:outputText value="view by job"/>
               </h:commandLink>
          </h:form>
     </h:panelGroup>
     <h:panelGroup>
          <h:form id="quickSearchBeanForm">
               <h:panelGrid columns="3">
                    <h:outputText value="Search By Option:"/>
                    <h:panelGroup>
                         <h:selectOneMenu id="quickSearchBean_searchByOption" value="#{navigationPaneBean.quickSearchBean.searchByOption}">
                              <f:selectItems value="#{navigationPaneBean.quickSearchBean.searchByOptions}"/>
                         </h:selectOneMenu>
                    </h:panelGroup>
                    <h:message for="quickSearchBean_searchByOption"/>
                    <h:outputText value="Search For:"/>
                    <h:inputText id="quickSearchBean_searchFor" value="#{navigationPaneBean.quickSearchBean.searchFor}"/>
                    <h:message for="quickSearchBean_searchFor"/>
               </h:panelGrid>
          </h:form>
     </h:panelGroup>
     <h:panelGroup>
          <h:form>
               <h:commandLink id="gotoAdmin" action="gotoAdmin" immediate="true" style="text-align: center">
                    <h:outputText value="admin"/>
               </h:commandLink>
          </h:form>
     </h:panelGroup>
     <f:facet name="footer">
          <h:form>
               <h:commandLink id="logout" action="logout" immediate="true" style="text-align: right">
                    <h:outputText value="logout" style="text-align: right"/>
               </h:commandLink>
          </h:form>
     </f:facet>
</h:panelGrid>
[/code:1:ccbd93ceb2]
Just to be really clear, here is the dierctory structure for the relevant files:
[code:1:ccbd93ceb2]/web
|
|
|--/pages
|   |
|   |
|   |--/app
|   |   |
|   |   |
|   |   |--/subview
|   |   |   |
|   |   |   |--navigationPane.jspf
|   |   |
|   |   |
|   |   |--home.jsp
|   |
|   |
|   ...
|
...[/code:1:ccbd93ceb2]
My problem is that the subview will not display when I run the web app. In the design view I can see it just fine, but when I browse to home.jsp when running, all I get is this (from view source):
[code:1:ccbd93ceb2]<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Untitled Document</title>
</head>
<body>
<table width="100%"><tbody><tr><td>Hello?</td></tr>
<tr><td><table width="100%"><tbody><tr><td></td><td>Hello-o-o-o...?</td></tr>
</tbody></table></td></tr>
<tr><td>Where's my subview?</td></tr>
</tbody></table>
</body>
</html>
<script type="text/javascript">

</script>
[/code:1:ccbd93ceb2]
Does anyone have any idea why this might not be working?
I'm really stumped!
Cheers,
   doug.

http://forum.java.sun.com/thread.jspa?messageID=3413354&#3413354

Create trigger not audited when run from sql developer Version 3.2.20.09

Creating or editing a trigger is not being stored in the audit table when run from sql developer.
Here is a sample script to show the issue:
Grant Connect,create table,create trigger To testuser Identified By testuser;
create table testuser.testtab(t1 number);
Select Count(*) From Dba_Audit_Trail Where Owner='TESTUSER';
CREATE OR REPLACE TRIGGER testuser.testtab_bi_trg BEFORE
Insert
ON testuser.testtab FOR EACH ROW
begin
null;
end;
Select Count(*) From Dba_Audit_Trail Where Owner='TESTUSER';
drop user testuser cascade;
If I run the script from sql developer the CREATE TRIGGER statement does not get audited.
If I run the script from sql plus or All Arround Automations PL/SQL Developer the CREATE TRIGGER statement does get audited.
If I edit the trigger from sql developer the CREATE TRIGGER statement does not get audited.
If I edit the trigger from All Arround Automations PL/SQL Developer the CREATE TRIGGER statement does get audited.

DoyleFreeman wrote:
Not sure what you mean by "perform the audit".
Have you tested my script? Does the "Select Count(*) From Dba_Audit_Trail Where Owner='TESTUSER';" increment by 1 after each of the ddl statements or only after the Create table statement.
Your question doesn't have ANYTHING to do with sql developer and should be posted in the Database General forum
https://forums.oracle.com/community/developer/english/oracle_database/general_questions
Yes - and it works just fine once you ENABLE AUDITING. Your scripIt does NOT include the statements or code used to ENABLE auditing and, specifically, enable auditing for triggers.
Auditing doesn't just 'happen'; you have to enable it and you have to specify any non-default auditing that you want to perform.
Have you read any of the extensive documentation about auditing to learn how to use it?
See the Database Security Guide
http://docs.oracle.com/cd/E11882_01/network.112/e16543/auditing.htm
Also see 'Auditing Functions, Procedures, Packages, and Triggers
http://docs.oracle.com/cd/E11882_01/network.112/e16543/auditing.htm#BCGBEAGC
And see the AUDIT statement in the SQL language doc for how to specify auditing of specific operations.
http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_4007.htm
Select count(*) From Dba_Audit_Trail Where (Owner='SCOTT' or username = 'SCOTT')
and action_name = 'CREATE TRIGGER';
COUNT(*)
0
audit create trigger by scott
CREATE OR REPLACE TRIGGER emp_copy_bi_trg BEFORE
Insert
ON emp_copy FOR EACH ROW
begin
null;
end;
Select count(*) From Dba_Audit_Trail Where (Owner='SCOTT' or username = 'SCOTT')
and action_name = 'CREATE TRIGGER';
COUNT(*)
1

Remove or Hiding Marketing Documents from SAP Business One.

Hi Everyone,
Is there any way by which a marketing document in SAP Business One can be deleted or be hidden. For example in a Sales A/R module the the client does not want to use or also view the AR downpayment request or AR down payment invoice as it is not required for his business. What is the way to hide or remove it from the user point also during authorization.
I am also seeing that when in the user autorization I am giving full authorization for e.g in Purchase A/P Module - Purchase Order and Good Reciept PO only and when logging in by that assigned user I am only seeing the Purchase Order and Good Reciept PO that's absolutely fine but when I am going in Form Settings and and selecting visible for all the modules then all the marketing documents are coming back which should not come. Is there any way to block the form settings in this moment and when using the tab apply authorization in forms settings the defined authorized documents are comming but if one again clicks on form settings and make all the marketing document visible then again all the marketing documents are comming back which I don't want.
Please let me know your valuable comments in this regard.
Thanks and Regards

Kawish,
<Font Color="Blue" Size=3> To Hide the module from the User Main Menu
</Font>
Login as that user and click Form settings and Uncheck Visible for the
Using Authorization > General > Document Settings (change this to No Authorization)
This would prevent the user access to Form Settings.
<Font Color="Blue" Size=3> To Disable access to a Module
</Font>
Use Administration > System Initialization > Authorizations > Additional authorization creator. chose a name and in the Form ID area add the Form number. ( you can get the form number when you open the module and from the View menu enable system information, you can see the Forum number on the Task Bar)
Suda

Wrong User name or Password while connecting from SAP Business One - PL26

I have restored my database on the server.I am using Patch Level PL26
I am getting an error while logging to Server
Wrong username and password....Message [131-93]
Is it because i have not imported the Temporary Liscence.But when i work on my laptop, it doesnt give me an error with the same username and Password.
I have checked SAP B1 Suite Service Manager also......it is "ON".
Can you please give me an help on this issues, why is it giving this error
OR
Is there a problem in my SAP Business One Server installation
Steps i have followed to install the SAP Busines One Server
1 - PL26 - Packages - Server Tools - Setup
2 - SAPB1 - Packages - Server - Setup (Custom - Demo-India
3 - Client - setup
4 - PL26 - Packages - DIAPI - Setup
Not installed -
5 - Packages - Upgrader Common - Setup
Reason - I have been told that until and unless you import liscense, you cannot run Upgrader Common Setup.
Please if you can find out is this true ?
Is the problem coming because i have not run the Upgrader Common setup ?

Hi Khimesra,
Could you please try the following:
1 - Firewall/antivirus disabled
2 - B1 uninstalled
3 - Net 1.1 installed
4 - B1 reinstalled
Please also refer to the following SAP notes:
546344 and 542690
Regards
Emanuel

Loading data from SAP Business One to BW

We need to load data from several SAP Business One databases to BW. I find some special objects for SAP Business One in the Business Content
And a short description in Help:
The source for the data upload is a file system. The relevant files can be generated using the views provided within the SAP Business One database.
May be someone has an experience in this area or could advise documentation about this
May be better to use DB-connect?
Thanks for your help

Hello Elena,
I am just curious if you've found answer to your question how to extract data fron BusinessOne into SAP/BI? What can we use? Only flat files or there are some standard extractors exists? Or have you used DB Connect for that?
Thank you,
-Vitaliy

Hi Experts confusion on migration from "SAP Business One" to "SAP R/3"

Hi All
I am a certified SAP Business One Certified Solution consultant and working on SAP Business One for the past 2.5 yrs and done 4 implementations.
I want to migrate to SAP R/3 and have confusion on weather to join Project Systems/Material Management for training and pursue my career in the same. I want to do the Online Certification for the same.
I feel like Jack of ALL and Master on None after working on SAP Business One.
Pls guide me on the possible R/3 career options after SAP Business One and weather my experience in SAP will be counted for my future SAP career.
I am confused Pls help.

Better get trained in area of domain experience and get SAP certified.
Check also this links
Career Advice: SAP Business One to R3 transition in Ottawa Canada
SAP B1 or R/3...which one to select
http://it.toolbox.com/blogs/sap-library/sap-business-one-vs-sap-r3-system-architecture-13952
http://it.toolbox.com/blogs/sap-business-one/sap-business-one-training-isnt-that-the-same-as-r3-9066
Contact nearest SAP education partner for getting trained.
http://www.siemens.co.in/en/about_us/index/our_business_segments/information_and_communication/sisl_business_profile/education_training/general_faq.htm
http://www.sap.com/asia/services/education/schedule/schedule_IN.htm

Crystal report parameters not available when running from within SAP B1

Hi
I have found this problem a few times already and I think it is now about time I find a solution for it.
On my latest Crystal report, I have 2 parameters.
The 1e is a dynamic parameter, allowing the user to select multiple groups.
The 2nd is also a dynamic parameter, allowing the user to select only a single item.
These parameters works fine in Crystal and do what they are supposed to do.
After publishing the report in SAP Busines One (SBO) and viewing it from within SBO, the 2 parameter prompts are still there but without the dynamic list to select any data from.
On a previous report where a parameter has been defined as "Any value can be entered for the parameter" once again worked fine in crystal but from within SBO the parameter allowed no value to be entered.
Have anyone got a solution for this.
Regards
Burger

Sorry guys
You have lost me. I have searched the form and I have worked through the whole pdf you suggested.
I have no idea what I am supposed to do or see or use "ItemGroup@ SELECT ItmsGrpCod, ItmsGrpNam FROM OITB ORDER BY ItmsGrpCod"
As a test I created a test report with the following parameters to test how it would present itself in B1
1.     A static parameter with no list. Allow custom Values = True, Allow Multiple Values = True u2013 B1 result. A box that I could enter anything. Defeating the object as I wanted a list of valid options
2.     A static parameter with no list. Allow custom Values = True, Allow Multiple Values = False u2013 B1 result. A box that I could enter anything. Defeating the object as I wanted a list of valid options
3.     A static parameter with a list. Allow custom Values = True, Allow Multiple Values = True u2013 B1 result. A box that I could select multiple values from a list. I could not add my own value. Defeating the object as the list is static
4.     A static parameter with a list. Allow custom Values = True, Allow Multiple Values = False u2013 B1 result. A drop down box where I could select one of the values. Defeating the object as the list is static
5.     A static parameter with a list. Allow custom Values = False, Allow Multiple Values = False u2013 B1 result. Same as in point 4
6.     A Dynamic parameter. Allow custom Values = True, Allow Multiple Values = False u2013 B1 result. Same as in point 1 & 2. No Dynamic list returned and can not add own option
As mentioned. All the parameters work in Crystal as one expect it to. What I am after is what should I change in B1 so that the report works the same as in Crystal.
Where in B1 should it be changes and to what should it be changed.
If the changes should be done in crystal to cater for B1 then what should be changes where to what
I am not that familiar with B1.
In my test report I use B1 table OITM.
My parameter is Item (Crystal syntax {?Item}) and I use it in a filter to say {OITM.ItemCode} = {?Item}
Regards
Burger

Icons files will not displaying when running web-based forms locally

My icon files (jpgs) are not displaying from within Forms Developer 10g or when I run the web-based forms from within Developer. I have tried the following without success:
6.4 Deploy Icons for Forms Running on Web
Option One: For Running Web Based Forms from Within the Forms Builder in Oracle 10g Developer Suite
1) Copy all the icon image files (*.jpg) to the directory of <Oracle_10g_Developer_Suite_Installation_Root_Dir>\forms\j2ee\formsapp\formsweb\icons
2) Make sure to set imageBase=DocumentBase in the file < Oracle_10g_Developer_Suite_Installation_Root_Dir >\forms\server\formsweb.cfg.
3) Edit the < Oracle_10g_Developer_Suite_Installation_Root_Dir >\forms\java\oracle\forms\registry\Registry.dat file, specify the icon image file extension by modifying the following line:
default.icons.iconepath=icons/
default.icons.iconextension=jpg
Save this Registry.dat file.
4) Restart the OC4J Instance.
5) Launch the form from Forms Builder.
I just got a new laptop and am setting everything up again. I have everything setup the same way as on my old machine (same as above). It worked fine on my old computer but not on the new one.

hi
try to create jar file for u r all jpgs but also u have to check the size of u r images
and if possible try to resave the same images by using Acdsee or use any other image viewer softwares.
hope this helps u...
sarah

Subreport not displayed when Run from SAP Business One

Similar Messages

Maybe you are looking for