Subreport totals are not displayed correctly in Preview

I'm using Crystal Reports 2008.  I have a subreport that sorts hiearchically.  It is placed in the Report Header of the main report.  Within the subreport, it has calculated totals for each hiearchy grouping.  When ran, those totals are incorrectly displayed in the Preview;  however, when I click on the subreport, those totals are displayed correctly in the preview of the subreport.  Also,  if I go to the subreport design, pretending I'm editing the subreport, then go back to the main report preview, those totals are correct.
Has anyone experienced this issue?  Please provide help/advise.  Thanks.

Shwu, The subreport does not process any value based on the main report. I also observed that if the group extends to next page, the totals are incorrectly displayed.  I have both 'Keep Group Together' and section 'Keep Together' selected, but still the data extends to next page.  The subreport is sorted with 'Hierarchical Grouping'.  For example, below 2 lines are printed at bottom of a page:
North America
    Sales department
then Crystal prints the rest of departments belong to North America onto next page as:
     Marketing
     Consumer
         Government
         etc.
I was hoping if I could get Crystal to not print the group if there's not enough space on the page, but rather print on next new page, the incorrect totals would go away.  Any idea how I would do page break for hierarchical groupings?

Similar Messages

  • Umlauts are not displayed correctly in different programs

    Hello!
    I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
    I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
    Look at this example
    The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
    This is my locale
    locale
    LANG=en_US.UTF-8
    LC_CTYPE="en_US.UTF-8"
    LC_NUMERIC="en_US.UTF-8"
    LC_TIME="en_US.UTF-8"
    LC_COLLATE="en_US.UTF-8"
    LC_MONETARY="en_US.UTF-8"
    LC_MESSAGES="en_US.UTF-8"
    LC_PAPER="en_US.UTF-8"
    LC_NAME="en_US.UTF-8"
    LC_ADDRESS="en_US.UTF-8"
    LC_TELEPHONE="en_US.UTF-8"
    LC_MEASUREMENT="en_US.UTF-8"
    LC_IDENTIFICATION="en_US.UTF-8"
    LC_ALL=
    When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
    Do you understand my problem? What can I do?
    Thanks!
    Last edited by cyberius (2011-02-19 10:12:19)

    Did you check the locale settings on your Windows machine?

  • Search for member activities - points are not displayed correctly

    Hi experts,
    I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
    Can anyone tell me why the points in the result list are not displayed correctly?
    Thanks and best regards
    Anne

    Sometimes threads are deleted if they violate the Rules of Engagement.  If that happens, you'll lose points that were allocated to you.  Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this.  I'd guess, it's more likely you'd responded to a post that broke the rules.
    Really important
    1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable). 
    2. Don't ignore rejection emails or other communications from moderators.  They are followed up, and, if warnings are ignored, then accounts will be deleted.  Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
    matt

  • Entity Descriptions are not displayed correctly in Combo box dropdown list

    In Web Analysis, Entity Descriptions are not displayed correctly in Combo box dropdown list when entity descriptions from HFM contains a dot(.)
    Example:
    'Entity A. LTD' becomes 'LTD'
    'Entity B Inc.' becomes blank
    It seems that everything before the dot is not displayed when opening the combobox.
    It looks like it is acting like the option to show short description for entities in HR where the parent-child relation is not shown. This behaviour I don't expect for descriptions. And in my opinion is not an option in Web Analysis.
    Does anybody knows the sollution or have seen this issue before?

    Hi,
    This is a known issue with combo box list of values.
    Please follow this workaround:
    - Remove ComboboxLOV on Deptno
    - Create an updateable transient attribute(Say Dname) of type String
    - Define combobox lov with following values:
    List Data Source: DeptView1
    List Attribute: Dname
    List Return Values:
    Dname - Dname
    Deptno - Deptno
    UI Hints: Display Attribute - Dname
    - Edit Dname(transient attribute) and provide following groovy expression
    oracle.jbo.Key key = new oracle.jbo.Key(Deptno);
    return DeptView1.findByKey(key, 1)[0].getAttribute("Dname");- Now, you are done and observe that Dname combo box lov shows Description even on selection and change in this combo box sets the Deptno value
    Sireesha

  • Thumbnails are not displayed correctly in Firefox, but displayed correctly in Safari and G. Chrome

    Firefox display problems regarding this customers site:
    http://gardenia.dk/collections/collection/
    Thumbnails are not displayed correctly in Firefox - only a tiny bit of the picture is visible, incorrect scale (displayed correctly in Safari and Google Chrome).
    Can I do anything to make it work in Firefox, too?
    Kind regards,
    Annette

    This article might help you-
    https://support.mozilla.org/en-US/kb/websites-look-wrong-or-appear-differently

  • The Forms are not displaying correctly

    the Forms are not displaying correctly. Editing mode and printing mode are missing contents of notes/text field (Additional Notes, Background or Need, Project Summary). Second issue is when viewing/printing a Project Profile - Short Form, the text fields
    are shrink, they are not displayed full high to show all the text. It was working with IE9, IE10, but now IE10 and IE11 dont work.

    tested with Google Chrome and that seems to work the best in terms of viewing and printing the forms.
    Then you could try spoofing Google Chrome using a User-Agent string override and Document mode Edge.  Or open  IECompatData.xml  to see if you should have Compatibility View enabling Microsoft's list.  Or report your problem symptom and
    desired override here:
    http://www.modern.ie/report-compat-problem
    Ref:
    http://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
    Robert Aldwinckle

  • Permissions are not displaying correctly on Yosemite server

    My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
    I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share.  When checked from the server's finder, everything looks correct.  The server is setup for both AFP and SMB on file sharing.  I have also tried setting permissions from the server's finder and seemed to make no difference.
    When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group.  Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
    The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
    Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • With IE UIX buttons are not displayed correctly

    Hello there,
    We have developed an application using UIX. While browsing application using Internet Explorer I noticed that many of the buttons are not displayed correctly. Only some part of the button is displayed. Same thing happens while displaying some of the page logos and stuff. Did anyone have same problem? What's solution?
    Thanks,

    Hi Andy,
    sometimes half of button is displayed and sometimes the whole button image is distorted. if you refresh the page, it becomes perfectly fine. sometimes nothing is displayed but if you put mouse at the place where there should be a button, you would know that there is a button...
    it happens with random buttons...
    i haven't seen this problem in mozilla. its quite frequent in IE.
    our customer is very annoyed by this problem :(

  • Scientific fluorescence figures are not displayed correctly on iPad

    I use the iPad 1 for reading scientific papers, and I figured out that some fluorescence figures are not displayed correctly. The colours are not correctly distinguished, even some colours are completely missing. Is this a limitation of the iPad display or the current version of iOS.
    I am really disappointed. So, is there any solution?
    Many thanks.
    On MacBook Pro
    On iPad 1

    I am woundering if anyone can suggest any solution? Thank you.

  • Pdf not displayed correctly in preview

    We have a new A) scanner (colortrac Ci40) and when we scan a pdf it is displayed in preview as if it is all wrinkled up.
    Only in prewiew and if imorted in vectorworks. (on both OSX 10.5 and 10.6)
    The same problem appears on a iPad.
    It is not displayed correctly.
    In all other programms I tried it is displayed properly.
    We also have a small a4/a3 scanner from konica minolta and these scans display corectly in preview.
    Is this only a preview problem and should I ignore it?

    Hi there,
    I have a very similar problem: a number of pdf files that I can see perfectly well in Safari/GoogleChrome do NOT show correctly in Preview or ANY iPad app I have (Notability, Adobe, PDF Expertm iAnnotate, Dropbox etc.).
    The problem is that punctuation -- with the expection of periods or bolded text -- does not show properly. For example, commas and quotation marks to not show, and some numbers to not show.
    Moreover, once I have annotated/viewed the problematic file on the IPad and resync to dropbox to view on Mac vis Adobe (which I do with most pdf files with no problems), I get an error message upon reopening the pdf file saying "Cannot extract the embedded font 'FAFWQV+--unknown-2--'. Some characters may not display or print correctly." (the 'quoted' text changes each time). When opening in Preview, no error message appears, though the fole is still lacking punctuation etc.
    Here is a link to one problematic pdf:http://niis.cass.cn/upload/2012/12/d20121201200145301.pdf
    NB: the file is in Mandarin, however I can successfully open/edit/annotate/sync other pdfs using Mandarin font so I'm not sure if the language is related to the problem.
    I would be extremely grateful for some help with this please!
    Thanks!

  • Vietnamese fonts are not displayed correctly.

    The Vietnamese input program worked fine in the previous version but in version 4 the texts are not aligned correctly. See this http://i485.photobucket.com/albums/rr219/september17th/untitled-16.jpg
    The character set used is Composite Unicode and input method is VNI. I tried VN forum but no one care about it =.= Also this is the FF problem those texts displayed correctly in Chrome. Those posts are here http://www.tinhte.vn/tin-tuc-su-kien-10/hp-va-dell-cong-khai-chi-trich-ipad-2-cua-apple-644640/index15.html

    I also have this problem, hope this problem will be fixed in the next release. More info: http://vozforums.com/showpost.php?p=28008790&postcount=61

  • Grand totals are not displaying...

    hi guys
    for cross tab reports grand totals (rows and columns) are not displaying.
    is there any fix to resolve.

    I have faced a similar issue in Cross tab reports.
    Try using Cell Sum/Cell Sum distinct function instead
    of the usual Sum function while calculating the grand total that function is working for Grand Total at bottom but not working for Grand Total on right [i]

  • Webpages are not display correctly

    Hello,
    my problem is webpages are not shown correctly you can see in images
    i use chrome Version 41.0.2272.118 dev-m   it is shown correctly after certain refreshes please help me this is very irritating.

    Hello,
    Thank you for posting in the HP Support Forum.
    Is this only happening with the HP forum site or with many web-sites ?
    Can you try with different browsers - IE, Firefox ?
    Please, re-install Chrome and install/run the latest stable Chrome release:
    http://www.wikihow.com/Reinstall-Google-Chrome
    http://googlechromereleases.blogspot.com/2015/04/stable-channel-update.html
    Google uses Windows internal settings for Internet. These instructions refer to IE but will also affect some Chrome settings. Please, follow them:
    https://support.microsoft.com/en-us/kb/923737
    If the above does not help, please check with your ISP (Internet service provider) about DNS issues and your DNS settings or any other issues.
    Check with your antivirus software or firewall (disable protection, disable web-protection, disable firewall or IPS protections and test)
    Best wishes,
    IT_WinSec
    Hewlett-Packard employee | HP Enterprise Services
    Although I work for HP, I express my personal opinion.
    Visit www.hp.com/makeitmatter
    --Say "Thanks" by clicking the Kudos Thumb Up in the post that you find useful.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Percentage Values are not displayed correctly when Calculated Item feature

    I have developed an OBIEE answer with multiple pivot tables. Each of the Pivot Tables contains a mix of $ Amount and Percenatge columns. I have to display the totals as the last row of each Pivot Table. For reasons I am yet to figure out, some of the totals were not working. Hence, I used the "Calculated Item" feature with sum(*) as the formula to get the Totals. This is giving me the correct results for $ Amount columns but not for the % columns.
    The system seems to be summing up the row-level percentages to arrive at the total percentage, which is not the expected bhavior.
    Sample data:
    Products| Dist. FG| VPE %| Mfg. FG| Mfg. FG VPE %
    Product1| $58| 1% | $1 | 100%
    Product2| $45| (0%) | $36 | 24%
    Product3| $22| 0% | $12 | (40%)
    Product4| $1 | (0%) | $9 | 0%
    Product5| $41 | 2% | $15 | 15%
    Total | $166 | 3% | *$73* | *100%*
    Total - Calculate Item (sum(*))
    Total Mfg. FG - Correct
    Total Mfg FG VPE% - Incorrect (Expected value is ~ 9 %)

    Thanks for the response, Andre.
    As I mentioned, The default total row is not producing the correct results for reasons I am yet to figure out.
    We are using OBIEE 10g (10.3.4)
    Percentages work well with default total, but here we need the same result through the calculated item.

  • Heirarchy values are not displaying correctly in report.

    Hi,
    I am having a heirarchy field in my report.
    I have 2 local RKF's in my report and 2 manadatory variables(which are FISCAL YEAR AND CAL MONTH).
    When i am executing the report , it is displaying the Heirarchy values with respect to one restricted KF.
    The heirarchy values correspoding to other RKF are not getting displayed properly, it is showing as (NOT Assigned).
    Its giving the correct values for the RKF's but not showing the  heirarchy values.
    I hided the 2nd RKF, then also its showing in the same way.
    Please help me on this,
    Thanks in advance!

    Hi, Saro,
    >
    I have taken a std. report to customize, and the name of the report is Asset Retirements from Fixed Asset module.
    From the existing base query, i have added some query to customize it.
    I have summed  the cost column in the report using summary column.
    For example, im passing a parameters which displays 5 lines in the report output. Im getting the cost value correctly in all the 5 lines, but when i tried to sum all the 5 lines, it is taking the first line of cost value and it is not summing the cost value of all the 5 lines in the report. I dont know why this problem occurs.
    Summary column should be place one level up of the query and set the following values under summary
    Function
    Source
    Reset As

Maybe you are looking for