Subroutine for subtotal not getting triggered
Hi ,
I am using a dynamic internal table and passed to reuse_alv_grid_display .i have populated the event table with the subroutine for calculating the subtotal .
Please find my code below.
populating sort and layout structure .
z_v_repid = sy-repid.
z_wa_layout-zebra = 'X'.
z_wa_layout-colwidth_optimize = 'X'.
z_wa_sort-fieldname = 'LIFNR'.
z_wa_sort-up = 'X'.
z_wa_sort-subtot = 'X'.
APPEND z_wa_sort TO z_i_sort[].
CLEAR z_wa_sort.
z_wa_sort-fieldname = 'MATNR'.
z_wa_sort-up = 'X'.
z_wa_sort-subtot = 'X'.
APPEND z_wa_sort TO z_i_sort[].
CLEAR z_wa_sort.
z_wa_sort-fieldname = 'WERKS'.
z_wa_sort-up = 'X'.
z_wa_sort-subtot = 'X'.
APPEND z_wa_sort TO z_i_sort[].
CLEAR z_wa_sort.
CLEAR z_wa_event.
populating the field catalogue
z_wa_fcat-col_pos = 0.
z_wa_fcat-fieldname = 'LIFNR'.
z_wa_fcat-tabname = '<Z_F_DYNTABLE>'.
z_wa_fcat-seltext_l = 'Vendor'.
append z_wa_fcat to z_i_fcat[].
clear z_wa_fcat.
z_wa_fcat-col_pos = 1.
z_wa_fcat-fieldname = 'MATNR'.
z_wa_fcat-tabname = '<Z_F_DYNTABLE>'.
z_wa_fcat-seltext_l = 'material'.
append z_wa_fcat to z_i_fcat[].
clear z_wa_fcat.
z_wa_fcat-col_pos = 2.
z_wa_fcat-fieldname = 'WERKS'.
z_wa_fcat-tabname = '<Z_F_DYNTABLE>'.
z_wa_fcat-seltext_l = 'Plant'.
append z_wa_fcat to z_i_fcat[].
clear z_wa_fcat.
z_wa_fcat-col_pos = 3.
z_wa_fcat-fieldname = 'BASME'.
z_wa_fcat-tabname = '<Z_F_DYNTABLE>'.
z_wa_fcat-seltext_l = 'Unit'.
append z_wa_fcat to z_i_fcat[].
clear z_wa_fcat.
during run time the field catalogue table is filled with column names from z_i_temp determined during run time
DO z_v_num_month TIMES. "builds the field catalogue
j = sy-index.
READ TABLE z_i_temp INTO z_wa_temp INDEX j.
z_wa_fcat-fieldname = z_wa_temp-mon.
z_wa_fcat-seltext_m = z_wa_temp-mon.
z_wa_fcat-col_pos = l.
z_wa_fcat-tabname = '<Z_F_DYNTABLE>'.
l = l + 1.
APPEND z_wa_fcat TO z_i_fcat[].
CLEAR: z_wa_fcat , z_wa_temp.
ENDDO.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = z_i_fcat1
IMPORTING
ep_table = z_i_temp1.
ASSIGN z_i_temp1->* TO <z_f_dyntable>.
CREATE DATA z_wa_temp1 LIKE LINE OF <z_f_dyntable>.
ASSIGN z_wa_temp1->* TO <z_f_workarea>.
The event table is populated .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 4
IMPORTING
ET_EVENTS = z_i_event[]
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE z_i_event INTO z_wa_event
WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
MOVE z_k_formname TO z_wa_event-form.
MODIFY z_i_event FROM z_wa_event INDEX sy-tabix.
ENDIF.
and then the z_f_dyntable is populated with values .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = z_v_repid
IS_LAYOUT = z_wa_layout
IT_FIELDCAT = z_i_fcat
IT_SORT = z_i_sort
I_DEFAULT = 'X'
I_SAVE = 'A'
IT_EVENTS = z_i_event
TABLES
t_outtab = <z_f_dyntable>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
The subroutine
It getting triggered throught the funtion call in User Exit of MM01.
1. I hope the workflow customization is done properly in production system, as you stated that if you are trying to trigger from PFTC then it is working fine, can you please try to Refresh Organizational Environment from SBWP ---> On MEnu ---> Settings --> Workflow Settings ---> Refresh Organizational Environment and secondly try to refresh the buffer from txn SWU_OBUF
2. Make sure the user exit is transported to Production.
3. Check the workflow log from the txn SWIA if you have proper authorizations for the userid.
Similar Messages
-
Issue in Production for Workflow not getting Triggered .
Hi Guys,
I have a workflow, which is properly triggering in the development and Quality but not getting triggered in the Production. Can't get the Exaact reason because by using T-code PFTC when i test the workflow independantly its working properly and even BOR does not have any problem. Please Help me guys as this is a issue in Production.
The workflow is a customized one, It getting triggered throught the funtion call in User Exit of MM01.
ThanksIt getting triggered throught the funtion call in User Exit of MM01.
1. I hope the workflow customization is done properly in production system, as you stated that if you are trying to trigger from PFTC then it is working fine, can you please try to Refresh Organizational Environment from SBWP ---> On MEnu ---> Settings --> Workflow Settings ---> Refresh Organizational Environment and secondly try to refresh the buffer from txn SWU_OBUF
2. Make sure the user exit is transported to Production.
3. Check the workflow log from the txn SWIA if you have proper authorizations for the userid. -
BADI implementation for NOTIF_EVENT_POST not getting triggered
Hi All,
We have created an implementaion for the NOTIF_EVENT_POST. And it was working fine previously. Now it is not working for some reason. In fact issue is that the implemetation is not getting triggerd at all. I have put a BREAK-POINT statement in the code, but does not even goes into the code.
I have checked all the properties. It is active. The table V_EXT_IMP has a entry corresponding to the BADI definition and implementation.
I tried to debug the standard transaction IW52 (which uses this). The program runs till the FM call for CL_EXITHANDLER=>GET_INSTANCE. It created a instance also. But it does not get inside the call for the method of the BADI LR_BADI_INST->CHECK_DATA_AT_POST.
I am at a fix now. Can somebody answer this issue? It would be very helpful.
Regards
Barada.
Edited by: Baradakanta Swain on Aug 5, 2008 4:06 PMI did not get the issue with the BADI implementation. But as our time line was very tight, we moved the code to BTE event for Updating Notifications.
This required a little tweaking of the code and now it is working.
I am marking it ANSWERED so as to remove it from the list of unanswered questions.
Regards
Barada -
Output type is not getting triggered for ship to party in shippment output
Hi,
we have maintained output determination procedure for shipments. It was working fine.
We have just added new condition table to access sequence, and maintained the condition records also for condition type ZABC. I have checked in NACE, Application V7, I am able to find the condition type. checked in VV73, condition records displayed. But in VT02N/VT03N, we are unable to get print for the output type.
Why this is happening? we are able to see the procedure, condition type, access sequence, condition records in place ...why condition type ZABC is not getting triggered in the shipment output.
Please advise and let me know if you need more details....thanks in advance.
Thanks,
SSHi Noel,
Thanks for your time and reply.
We have output determination procedure for shipments, condition type ZABC, Access sequence ZABC, Condition tables 550,600,650,700 already maintained. output is working fine.we have a new requirement and created new condition table 700 with the fields" Ship to party and transportation planing point "(Condition table 700 ). we assigned the condition table 700 to access sequence ZABC. Condition type ZABC already placed in Output determination procedure.
We test the output, new condition record is not triggering in the output, even in output determination analysis also, we are unable to see the record 700 for the condition type ZABC. we are not sure what is the reason for the condition table that is not picking up ? Why condition type ZABC with condition record 700 not visible in output determination analysis.
I have checked condition records, output determination procedure. Please advise and let me know you need more details.
Thanks,
SS -
Userexit not getting triggered for 0CFM_CLASS_MASTER_DATA_ATTR
Hi Experts,
I have made enhancements to 0CFM_CLASS_MASTER_DATA_ATTR & 0CFM_FI_TRA_ATTR in RSAP0001(EXIT_SAPLRSAP_001). I have set the flag to New Data entry logic(Switch for Datasource feed) to populate the Timedependent attributes in 0CFM_CLASS_MASTER_DATA_ATTR .
I kept the break point in the Userexit and ran RSA3 for the above 2 datasources but the user exit is not getting triggered.
Can you please help why the userexit is not getting triggered?
Thanks,
bwuswer14.Hi,
Thanks for ur post.issue resolved.im keeping the breakpoint in 1st user exit.After keeping the breakpoint in EXIT_SAPLRSAP_002 it got triggered.Closing the thread.
Thanks,
bwuser14 -
For the new delivery type created the Idoc is not getting triggered
Hi All,
I am facing the following problem:
For every outbound delivery getting created we have an Idoc which creates the file(sending the outbound delivery details), this file is sent to a system where the picking & packing of the goods happen. This process seems to be working fine for all the existing delivery types, but now we created a new delivery type for which the Idoc is not getting triggered.
Would like to understand what setting are we missing because of which the Idoc is not getting created for the new delivery type.
The Idoc being used is: DESADV01
Message type :DESADV
Thanks,
GeetaI believe your existing idocs are created through a output type on the delivery ? if yes, probably you need to configure an existing output type / create a new output type for your new delivery type...
-
Exit Class for Inbound Mail not getting triggered
Hi Gurus,
I have created an exit class for processing the Inbound Mail that comes to SAP Inbox (SOIN).
I have set up the Inbound processing rule in transaction SO50 and set it to all recipients.
If i send a mail from any external id to the id configured in SAP then it is coming in SAP Inbox (SOIN) but the exit class for processing the email is not getting triggered.
I have made all the settings for SMTP.
Kindly guide me with the steps needed to be followed for triggering the Exit Class.Hi
Check u have maintained ur outgoing mail server IP in SCOT transation.
Check link step to configure PO mail.
http://architectsap.com/blog/sap/sap-mm-purchasing-send-purchase-order-by-mail-to-vendor-in-sap/ -
Event not getting triggered for a few users in production
Hi Experts!!
We have a workflow that gets triggered on the event REQUESTCREATED of BUS2089. In production, we see that for a few users the event is getting triggered and even the workflow is. But for a few users, the workflow is not getting triggered. However, we didn't check SWEQADM yet and are waiting to get auth to check the same. But before that, I need your valuable suggestions on this.
When I check SWEL, I cannot see any entries at all. Not even for the successfully processed ones.
Auth objects cannot be a reason, as all the users have same auth. Please suggest me on what else can be the reasons.
Your help is highly appreciable.Hello Srinivas !
Check in SWEQADM to know whether the event is on queue.If so, redeliver it.
If there is no event on queue, check the RFC queue( transaction SWU2 ) and ST22 for possible ABAP dumps.
Call work item list report (transaction SWI1) and check event linkages (transaction SWETYPV )of the users for whom the event is not triggered.Are you using BAdI or user- exit to trigger the workflow ? If so, check whether those are in active state.
Refresh the workflow buffers(transaction SWU_OBUF).Check either of the workflow versions are in active state.
Regards,
S.Suresh -
RSR_OLAP_BADI for virtual characteristics not getting triggered!!!
I am facing a strange problem and am a little pressed for time to solve the same. Any help/guidance related to this will be highly appreciated.
I am working on BI 7.0. I have two implementations of the BADI RSR_OLAP_BADI for virtual characteristics,
(1) say A, that we implemented as a proof of concept with filter as multiprovider M1
(2) say B, that in implemented with filter as multiprovider M2
Both were working fine and I was able to put breakpoints inside the code and debug whenever required. I had used it till last week and everything was fine.
Today, I had to change implementation B due to a new requirement. So a new characteristic was added to M2 and the code in B was extended at appropriate places to fill this new virtual characteristic also. However, even though the change was successfully activated and the BADI looked fine, it was not triggered when the query was executed. I checked with another query on M2 which was the query for which the implementation was initially made. For that also the BADI is not getting triggered. I put break points in the define, initialize and compute methods but none are hit during the query execution!
I further ran the queries on M1, which shud have called the implementation A. Then also the BADI is not getting triggered. Please note that implementation A, multiprovider M1 or the queries on it were not changed at all.
I really need to fix this issue at the earliest. What am I missing? Why are the BADIs not getting triggered eventhough the implementations are active, the BADIs are error free and the filters are correctly defined?
Are there any global settings that can turn off all BADIs?
Please help.
Thanks,
SarathFurther, when I created a fresh BADI implementation in a different system (a sandbox system), the BADI is working fine.
But in the Development system the BADIs are still not getting triggered. I made the exact same implementation as the one which worked in the different system.
Another point - when I see the Technical Information tab of queries from RSRT, or RSRT2 they have Virtual Characteristics/Key Figures "NO" in the development system.
For the queries in the prototype system in which the BADI is working this field in "Y".
Any idea how this is decided and how it can be changed to Y from NO?
One more strange thing is that there are other active implementation of this BADI used by other teams here and none of them are getting triggered. They are all active and were all working fine till the last few days!
Any help will be highly appreciated.
Thanks,
Sarath -
Due to MODIF ID, SELECT query in START-OF-SELECTION not getting triggered
Dear SAP Gurus,
I'm stuck with this program, where, my program is not being executed, as in, my SELECT query in my event START-OF-SELECTION is not getting triggered. Since i hav used MODIF ID, for SELECT-OPTIONS, even after putting the entries in select-options...................when i click on the execute button, or press F8, the program still goes into the AT SELECTION-SCREEN OUTPUT event..........but i want it to goto START-OF-SELECTION event where my SELECT query is........what should i do??????????????
Please find the notepad file having the code, n exucse me for any selection-texts absence.
Need help from u in this issue.
Thanks in advance.
REPORT ZPPR_CONVSTAT NO STANDARD PAGE HEADING.
INCLUDE ZPPR_CONVSTAT_TOP. " data declaration
INCLUDE ZPPR_CONVSTAT_SEL_CRITERIA. " selection criteria
INCLUDE ZPPR_CONVSTAT_PBO. " event at selection-screen output
INCLUDE ZPPR_CONVSTAT_START_SELECTION. " event start-of-selection
INCLUDE ZPPR_CONVSTAT_F_START_OF_SEL.
*& Include ZPPR_CONVSTAT_TOP
TABLES : VBUK,
VBUP,
VBAK,
VBAP,
VBEP,
VBPA,
TVAK,
EKUB,
LIKP,
LIPS,
MARA,
MAKT,
MARC,
PLAF,
AUFK,
AFKO,
AFPO,
AFVC,
AFVV,
CRHD,
PBIM,
KNA1,
T134,
IOHEADER,
IOITEM.
TYPE-POOLS : slis.
TYPES : BEGIN OF ty_final,
werks TYPE vbap-werks, "Plant
auart TYPE vbak-auart, "Sales Order Doc. type
erdat TYPE vbak-erdat, "Sales Order Creation date
vbeln TYPE vbak-vbeln, "Sales Order No.
posnr TYPE vbap-posnr, "Sales Order Item No.
aedat TYPE vbak-aedat, "Sales Order Change Date
kwmeng TYPE vbap-kwmeng, "Sales Order qty.
vdatu TYPE vbak-vdatu, "Requested Delivery Date
lfimg TYPE lips-lfimg, "Sales Order Delivered Qty.
matnr TYPE vbap-matnr, "Material ID
arktx TYPE vbap-arktx, "Material Description
strgr TYPE marc-strgr, "Planning Strategy
vrkme TYPE vbap-vrkme, "UOM
plnum TYPE plaf-plnum, "Plan Order No.
gsmng TYPE plaf-gsmng, "Plan Order Qty.
auffx TYPE plaf-auffx, "Plan Order Firming Indicator u2013 Qty.
stlfx TYPE plaf-stlfx, "Plan Order Firming Indicator - Component
erdat2 TYPE aufk-erdat, "Production Order Creation Date
aufnr TYPE aufk-aufnr, "Production Order No.
prdqty TYPE afko-gamng, "Production Order qty.
pckqty TYPE lips-lfimg, "Packed Delivered Qty.
psamg TYPE afpo-psamg, "Allotted scrap
igmng TYPE afko-igmng, "Confirmed Yield Qty.
iasmg TYPE afko-iasmg, "Confirmed Scrap Qty
iamng TYPE afpo-iamng, "Expected Yield
wemng TYPE afpo-wemng, "Delivered Qty.
altscrp TYPE c LENGTH 6, "Allotted Scrap %
actscrp TYPE c LENGTH 6, "Actual Scrap %
umrez TYPE afvv-umrez, "Ups (from Prd. ORD)
ups TYPE clobjdat-ausp1, "Ups (from Material Master)
crtnstl TYPE clobjdat-ausp1, "Carton Style
ppopr TYPE clobjdat-ausp1, "Pre-Printing Operation
brdtyp TYPE clobjdat-ausp1, "Board Type
lsdim1 TYPE clobjdat-ausp1, "Layout Size u2013 Dim 1
lsdim2 TYPE clobjdat-ausp1, "Layout Size u2013 Dim 2
lsgsm TYPE clobjdat-ausp1, "GSM
inktyp TYPE clobjdat-ausp1, "Ink Type
foiltyp TYPE clobjdat-ausp1, "Foiling
wintyp TYPE clobjdat-ausp1, "Window Type
lamin TYPE clobjdat-ausp1, "Lamination
fsvrnsh TYPE clobjdat-ausp1, "Front Side Varnish
bsvrnsh TYPE clobjdat-ausp1, "Back Side Varnish
emboss TYPE clobjdat-ausp1, "Embossing
punch TYPE clobjdat-ausp1, "Punching
paste TYPE clobjdat-ausp1, "Pasting
oprno TYPE afvc-vornr, "Operation No.
wrkcntr TYPE crhd-arbpl, "Work Centre
oprtxt TYPE afvc-ltxa1, "Operation Text
oprqty TYPE afvv-mgvrg, "Operation qty.
yield TYPE afvv-lmnga, "Yield
scrap TYPE afvv-xmnga, "Scrap
jobtyp TYPE vbak-augru, "Job Type
prordst TYPE bsvx-sttxt, "Production Order Status
solinst TYPE vbup-lfsta, "Sales Order Line Item Status
sldprty TYPE kna1-name1, "Sold to Party Name
shpprty TYPE kna1-name1, "Ship to Party Name
shpcity TYPE kna1-ort01, "Ship to party - City
END OF ty_final.
TYPES : BEGIN OF ty_vbak,
auart TYPE vbak-auart,
erdat TYPE vbak-erdat, "Doc creation date
vbeln TYPE vbak-vbeln,
aedat TYPE vbak-aedat, "Doc change date
vdatu TYPE vbak-vdatu, "Requested delivery date
kunnr TYPE vbak-kunnr,
augru TYPE vbak-augru, "Job Type
END OF ty_vbak.
TYPES : BEGIN OF ty_vbap,
vbeln TYPE vbap-vbeln,
posnr TYPE vbap-posnr,
werks TYPE vbap-werks,
matnr TYPE vbap-matnr,
arktx TYPE vbap-arktx,
kwmeng TYPE vbap-kwmeng,
vrkme TYPE vbap-vrkme,
END OF ty_vbap.
TYPES : BEGIN OF ty_pbim,
pbdnr TYPE pbim-pbdnr, "Requirements Plan Number
bdzei TYPE pbim-bdzei, "Independent requirements pointer
matnr TYPE pbim-matnr,
werks TYPE pbim-werks,
END OF ty_pbim.
TYPES : BEGIN OF ty_pbhi,
bdzei TYPE pbhi-bdzei, "Independent requirements pointer
pdatu TYPE pbhi-pdatu, "Requirement date
laeda TYPE pbhi-laeda, "Date of Last Change
END OF ty_pbhi.
TYPES : BEGIN OF ty_ekko,
ebeln TYPE ekko-ebeln, "STO doc no
bsart TYPE ekko-bsart,
reswk TYPE ekko-reswk, "Supplying plant
aedat TYPE ekko-aedat, "Doc creation date
END OF ty_ekko.
TYPES : BEGIN OF ty_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat, "Doc change date
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
matnr TYPE ekpo-matnr,
txz01 TYPE ekpo-txz01,
END OF ty_ekpo.
TYPES : BEGIN OF ty_eket,
ebeln TYPE eket-ebeln,
ebelp TYPE eket-ebelp,
eindt TYPE eket-eindt, "Requested delivery date
END OF ty_eket.
TYPES : BEGIN OF ty_lips,
vbeln TYPE lips-vbeln,
posnr TYPE lips-posnr,
vgbel TYPE lips-vgbel,
vgpos TYPE lips-vgpos,
lfimg TYPE lips-lfimg,
END OF ty_lips.
TYPES : BEGIN OF ty_plaf,
plnum TYPE plaf-plnum,
matnr TYPE plaf-matnr,
gsmng TYPE plaf-gsmng,
auffx TYPE plaf-auffx,
stlfx TYPE plaf-stlfx,
kdauf TYPE plaf-kdauf,
kdpos TYPE plaf-kdpos,
pbdnr TYPE plaf-pbdnr,
END OF ty_plaf.
TYPES : BEGIN OF ty_aufk,
aufnr TYPE aufk-aufnr,
erdat TYPE aufk-erdat,
objnr TYPE aufk-objnr,
END OF ty_aufk.
TYPES : BEGIN OF ty_afko,
aufnr TYPE afko-aufnr,
gamng TYPE afko-gamng, "Total order quantity
gasmg TYPE afko-gasmg, "Total scrap quantity in the order
igmng TYPE afko-igmng, "Confirmed Yield Qty
iasmg TYPE afko-iasmg, "Confirmed Scrap Qty
aufpl TYPE afko-aufpl, "Routing number of operations in the order
END OF ty_afko.
TYPES : BEGIN OF ty_afpo,
aufnr TYPE afpo-aufnr,
plnum TYPE afpo-plnum,
matnr TYPE afpo-matnr,
pgmng TYPE afpo-pgmng, "Plan Order Qty
kdauf TYPE afpo-kdauf,
kdpos TYPE afpo-kdpos,
psamg TYPE afpo-psamg, "Allotted scrap
iamng TYPE afpo-iamng, "Expected Yield Variance
wemng TYPE afpo-wemng, "Delivered Qty
END OF ty_afpo.
TYPES : BEGIN OF ty_afvc,
vornr TYPE afvc-vornr,
aufpl TYPE afvc-aufpl, "Routing number of operations in the order
aplzl TYPE afvc-aplzl, "General counter for order
arbid TYPE afvc-arbid, "Object ID of the resource
ltxa1 TYPE afvc-ltxa1,
END OF ty_afvc.
TYPES : BEGIN OF ty_afvv,
aufpl TYPE afvv-aufpl, "Routing number of operations in the order
aplzl TYPE afvv-aplzl, "General counter for order
umrez TYPE afvv-umrez,
mgvrg TYPE afvv-mgvrg,
lmnga TYPE afvv-lmnga,
xmnga TYPE afvv-xmnga,
END OF ty_afvv.
TYPES : BEGIN OF ty_mdvm,
mdkey TYPE mdvm-mdkey,
disst TYPE mdkp-disst,
matnr TYPE mdkp-matnr,
plwrk TYPE mdkp-plwrk,
END OF ty_mdvm.
DATA : it_final TYPE STANDARD TABLE OF ty_final,
it_vbak TYPE STANDARD TABLE OF ty_vbak,
it_vbap TYPE STANDARD TABLE OF ty_vbap,
it_lips TYPE STANDARD TABLE OF ty_lips,
it_pbim TYPE STANDARD TABLE OF ty_pbim,
it_pbhi TYPE STANDARD TABLE OF ty_pbhi,
it_ekko TYPE STANDARD TABLE OF ty_ekko,
it_ekpo TYPE STANDARD TABLE OF ty_ekpo,
it_eket TYPE STANDARD TABLE OF ty_eket,
it_plaf TYPE STANDARD TABLE OF ty_plaf,
it_aufk TYPE STANDARD TABLE OF ty_aufk,
it_afko TYPE STANDARD TABLE OF ty_afko,
it_afpo TYPE STANDARD TABLE OF ty_afpo,
it_afvc TYPE STANDARD TABLE OF ty_afvc,
it_afvv TYPE STANDARD TABLE OF ty_afvv,
it_mdvm TYPE STANDARD TABLE OF ty_mdvm.
DATA : wa_final TYPE ty_final,
wa_vbak TYPE ty_vbak,
wa_vbap TYPE ty_vbap,
wa_lips TYPE ty_lips,
wa_pbim TYPE ty_pbim,
wa_pbhi TYPE ty_pbhi,
wa_ekko TYPE ty_ekko,
wa_ekpo TYPE ty_ekpo,
wa_eket TYPE ty_eket,
wa_plaf TYPE ty_plaf,
wa_aufk TYPE ty_aufk,
wa_afko TYPE ty_afko,
wa_afpo TYPE ty_afpo,
wa_afvc TYPE ty_afvc,
wa_afvv TYPE ty_afvv,
wa_mdvm TYPE ty_mdvm.
DATA : it_object TYPE hum_object_t,
wa_object TYPE hum_object,
it_item TYPE hum_hu_item_t,
wa_item TYPE vepovb,
count1(6) TYPE n.
DATA : gv_objek TYPE ausp-objek. "Put matnr for use in FM u2018CLAF_CLASSIFICATION_OF_OBJECTSu2019
DATA : BEGIN OF it_sclass OCCURS 0.
INCLUDE STRUCTURE sclass.
DATA : END OF it_sclass.
DATA : BEGIN OF it_clobjdat OCCURS 0.
INCLUDE STRUCTURE clobjdat.
DATA : END OF it_clobjdat.
*& Include ZPPR_CONVSTAT_SEL_CRITERIA
SELECTION-SCREEN FOR 'PLANNING STAGE'
SELECTION-SCREEN BEGIN OF BLOCK main WITH FRAME TITLE text-001.
PARAMETERS: mrpntdn RADIOBUTTON GROUP sel DEFAULT 'X' user-command flag,
pldord RADIOBUTTON GROUP sel,
prdord RADIOBUTTON GROUP sel.
SELECTION-SCREEN END OF BLOCK main.
SELECTION-SCREEN FOR 'SELECTION BY PLANT AND PLANT DATA'
SELECTION-SCREEN BEGIN OF BLOCK plant WITH FRAME TITLE text-002.
PARAMETERS : p_werks LIKE ioheader-werks OBLIGATORY DEFAULT '1100' MATCHCODE OBJECT H_T001W.
SELECT-OPTIONS : so_matnr FOR ioitem-matnr MATCHCODE OBJECT MAT1.
PARAMETERS : so_mtart TYPE t134-mtart OBLIGATORY DEFAULT 'ZFIN' MATCHCODE OBJECT H_T134.
SELECT-OPTIONS : so_plnum FOR ioitem-plnum MATCHCODE OBJECT plnum MODIF ID pld,
so_aufnr FOR ioheader-aufnr MATCHCODE OBJECT orde MODIF ID prd.
PARAMETERS : p_prdsta LIKE tj02t-txt04 MODIF ID prd.
SELECTION-SCREEN END OF BLOCK plant.
SELECTION-SCREEN FOR 'SELECTION BY REQUIREMENT TYPE'
SELECTION-SCREEN BEGIN OF BLOCK reqtyp WITH FRAME TITLE text-003.
PARAMETERS : cb_so TYPE AUSWL_EB AS CHECKBOX USER-COMMAND flag,
cb_sto TYPE AUSWL_EB AS CHECKBOX USER-COMMAND flag,
cb_pir TYPE AUSWL_EB AS CHECKBOX USER-COMMAND flag.
SELECTION-SCREEN END OF BLOCK reqtyp.
SELECTION-SCREEN FOR 'SELECTION BY DATE AND REQUIREMENT TYPE NOS'
SELECTION-SCREEN BEGIN OF BLOCK dtreqtypno WITH FRAME TITLE text-004.
SELECT-OPTIONS : so_crtdt FOR vbak-erdat MODIF ID gen,
so_vbeln FOR vbap-vbeln MATCHCODE OBJECT WTY_F4_VBAP MODIF ID rso,
so_posnr FOR vbap-posnr MODIF ID rso,
so_ebeln FOR ekub-ebeln MATCHCODE OBJECT MEKKM MODIF ID rst,
so_ebelp FOR ekub-ebelp MODIF ID rst,
so_pbdnr FOR pbim-pbdnr MODIF ID rpi,
so_reqdt FOR vbep-edatu MODIF ID gen.
SELECTION-SCREEN END OF BLOCK dtreqtypno.
SELECTION-SCREEN FOR 'SELECTION BY OTHER PARAMETERS'
SELECTION-SCREEN BEGIN OF BLOCK othrparam WITH FRAME TITLE text-005.
SELECT-OPTIONS : so_kunnr FOR kna1-kunnr MATCHCODE OBJECT debi MODIF ID rso,
so_auart FOR tvak-auart MATCHCODE OBJECT H_TVAK MODIF ID rso,
so_lfsta FOR vbup-lfsta MODIF ID rso.
SELECTION-SCREEN END OF BLOCK othrparam.
*& Include ZPPR_CONVSTAT_PBO
*& Event AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
IF mrpntdn = 'X'.
LOOP AT SCREEN.
IF ( screen-group1 = 'PLD' OR screen-group1 = 'PRD' ).
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF pldord = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'PLD'.
screen-intensified = 1.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'PRD'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF prdord = 'X'.
LOOP AT SCREEN.
IF ( screen-group1 = 'PLD' OR screen-group1 = 'PRD' ).
screen-intensified = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF ( cb_so = ' ' AND cb_sto = ' ' AND cb_pir = ' ' ).
LOOP AT SCREEN.
IF ( screen-group1 = 'GEN'
OR screen-group1 = 'RSO'
OR screen-group1 = 'RST'
OR screen-group1 = 'RPI' ).
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF cb_so = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'RSO'.
screen-active = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
IF cb_sto = ' '.
LOOP AT SCREEN.
IF screen-group1 = 'RST'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF cb_pir = ' '.
LOOP AT SCREEN.
IF screen-group1 = 'RPI'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ELSEIF cb_sto = 'X'.
IF cb_so = ' '.
LOOP AT SCREEN.
IF screen-group1 = 'RSO'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF cb_pir = ' '.
LOOP AT SCREEN.
IF screen-group1 = 'RPI'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ELSEIF cb_pir = 'X'.
IF cb_so = ' '.
LOOP AT SCREEN.
IF screen-group1 = 'RSO'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF cb_sto = ' '.
LOOP AT SCREEN.
IF screen-group1 = 'RST'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
*& Include ZPPR_CONVSTAT_START_SELECTION
*& Event START-OF-SELECTION
IF mrpntdn = 'X'.
PERFORM start_of_selection_mrpntdn.
ELSEIF pldord = 'X'.
PERFORM start_of_selection_pldord.
ELSEIF prdord = 'X'.
PERFORM start_of_selection_prdord.
ENDIF.
*& Include ZPPR_CONVSTAT_F_START_OF_SEL
*& Form START_OF_SELECTION
Subroutine for MRP NOT DONE
FORM start_of_selection_mrpntdn.
SELECT mdkey INTO TABLE it_mdvm FROM mdvm
WHERE GSAEN = 'X'
AND AKKEN = 'X'.
IF sy-subrc = 0.
LOOP AT it_mdvm INTO wa_mdvm.
wa_mdvm-disst = wa_mdvm-mdkey(3).
wa_mdvm-matnr = wa_mdvm-mdkey+3(18).
wa_mdvm-plwrk = wa_mdvm-mdkey+21(4).
MODIFY it_mdvm FROM wa_mdvm INDEX sy-index TRANSPORTING disst matnr plwrk.
ENDLOOP.
ENDIF.
ENDFORM.
*& Form START_OF_SELECTION
Subroutine for PLAN ORDER CREATED
FORM start_of_selection_pldord.
ENDFORM.
*& Form START_OF_SELECTION for PRODUCTION ORDER CREATED
Subroutine for PRODUCTION ORDER CREATED
FORM start_of_selection_prdord.
ENDFORM.You need to mention START-OF-SELECTION explicitly in your code.
Change your code as below:
*& Event START-OF-SELECTION
START-OF-SELECTION.
IF mrpntdn = 'X'. -
Alert is not getting triggered in QA
Hai Experts!
i have transported the Alert Classification and Alert Category from development system to Quality system and i created the alert rule in QA. Now alerts mails are not tiggering. In se30 i have excecuted the RSALERTTEST that time i am getting a mail in the alert inbox and also to my mail box but for a real time data alert is not getting triggered.
Pls help me to solve this issue.
Regard's
PreethiHi
Schedule send job
please see as
help.sap says
Send Job
E-mails sent from an SAP application are first stored in a queue. A periodical background process, the SAPconnect send job, gets the e-mails from this queue and sends them over the Internet. To schedule this job in SAPconnect: Administration, proceed as follows:
i. Choose View ® Jobs.
ii. If no other job has been scheduled, choose Job ® Create.
iii. Enter a job name and confirm it.
iv. Select the variant SAP&CONNECTALL by positioning the cursor on it.
v. Choose Schedule Job.
vi. Choose Schedule periodically.
vii. Select the interval you require, such as 10 minutes.
viii. Choose Create.
Refer this.
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm -
Print program is not getting triggered when saving the application
Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
UmeshHi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar -
User command is not getting triggered in interactive ALV with LIST display
Hi experts,
I have developed an interactive ALV report with LIST display. Here, the issue is, when i double click a record in the primary ALV list, the control must go to the USER COMMAND event which i have written in my report. But the user command event is not getting triggered at all when i double click any record.
It gives the following information instead.
"Choose a valid function".
(My user command name and its respective form name are same.)
Here is my code..
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'TST1'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
FORM tst1 USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.
* When a record is selected
WHEN '&IC1'.
* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex. IF sy-subrc = 0.
* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.
* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'Z_DEMO_PDF_JG'
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
Please advice what is the msitake i have done here..Read the following code:
pass the i_callback_user_command = g_user_command to the ALV function module and write the FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
as shown below.
thanx
Data for ALV display
DATA : gt_fieldcat TYPE slis_t_fieldcat_alv,
gt_events TYPE slis_t_event,
g_variant LIKE disvariant,
g_user_command TYPE slis_formname VALUE 'USER_COMMAND',
g_status TYPE slis_formname VALUE 'SET_PF_STATUS',
gt_list_top_of_page TYPE slis_t_listheader,
g_repid LIKE sy-repid,
gf_pos TYPE i
Data for ALV display
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = g_repid
i_callback_program = sy-repid
it_fieldcat = gt_fieldcat[]
it_events = gt_events[]
i_callback_user_command = g_user_command
i_save = 'A'
is_variant = g_variant
TABLES
t_outtab = it_print.
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
CASE ucomm.
WHEN '&IC1'.
CASE selfield-sel_tab_field.
WHEN '1-KUNNR'.
READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
IF sy-subrc = 0.
SET PARAMETER ID 'BPA' FIELD wa_print-kunnr.
CALL TRANSACTION 'BP'.
ENDIF.
WHEN '1-MATNR'.
READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
IF sy-subrc = 0.
SET PARAMETER ID 'JP_ISS' FIELD wa_print-matnr.
CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN..
GET PARAMETER ID 'WRK' FIELD wa_zprint-werks.
SET PARAMETER ID 'VKO' FIELD wa_zprint-vkorg.
SET PARAMETER ID 'VTW' FIELD wa_zprint-vtweg.
CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN.
ENDIF.
Endcase.
Endform. -
Output fax not getting triggered when sales order credit block is released
Hi Experts,
I am working on an issue.
I have one sales Order which has credit block.
when we release the credit block via vkm3, then the output fax gets triggered.
I have another sales order which has credit block,
when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
Any advice on this please.
Regs,
SuryaD.
Edited by: SuryaD on Oct 21, 2010 9:34 PMHi Brad,
Thanks for your response.
Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
I went to Go to -Determine analysis for both orders 1 and order 2.
in both the analysis i am able to see the output ZFAX.
*Analysis Output*
*Order 1 Order 2*
1. ZFAX 1. ZFAX
10(Z010) 10(Z010)
0000122426 0000122427
2. ZFAX 2. ZFAX
When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
There in just 2 differences as below.
In the above screen,
1.Order 1 ==> has some value 0000122426
2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
Diagnosis
Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
In the above screen
1.Order 2 ==> has some value 0000122427
2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
No more information is available.
Please guide as to how to initiate the debug for output processing ?
Which screen where to switch on debugger.
where to look further?
Regards,
SuryaD.
Edited by: SuryaD on Oct 22, 2010 11:41 AM -
Driver program is not getting triggered
Hi Experts ,
I have assigned driver program and form under the application ME to the output type WE01 and WE02 and WE03 .But my program is not getting triggered.
How to check whether the Form entry is getting or not ?
i have also tried putting the break point in the program.
Please suggest .
ThanksHi Kartik,
Thanks a lot !
Update for you ......
By refereing std prog i have written the form routine like below.
FORM entry USING ent_retco ent_screen.
xscreen = ent_screen.
CLEAR ent_retco.
PERFORM check_input USING nast-objky.
ent_retco = retco.
perform fetch_data.
perform print_control.
ENDFORM.
form check_input using objky.
nast_key = objky.
select single werks from t001w into t001w-werks where werks = NAST_KEY-p_werks.
if sy-subrc ne 0.
message 'ENTER VALID PLANT' type 'E'.
endif.
endform. "check_input
But i am not able to debug the code...
Break point is not triggering the code.
Maybe you are looking for
-
Hi i am preparing notes for a presentation and was wondering was software would be best for doing it. You may have seen the picture of steve jobs notes from the iphone keynote, http://www.spymac.com/upload/2007/01/11/LJRzUHAdOF.jpg What software woul
-
When i plug my iPhone in rosette ( with euro adapter) the iPhone display has bug
May anybody can help me?
-
I would like to ask you regarding blocks in SAP Finance module. I have posted an invoice with MIRO and it was blocked due to quantity mismatch. After that I performed a reversal with MR8M and reposting and everything went well. The issue is that I ha
-
Building a table with data from a query
Hello group, Is it possible to build a table with the output from a query. We would like to build queries on precalculated data, and want to use other queries for the precalculation. Regards, Léon Hoeneveld
-
Is my computer infected with Malware?
I know it is unlikely since I am on the allegedly impenetrable OS of Mac, but a couple of things happened lately whilst I was browsing the internet on Safari that make me think I may have. A couple of days ago whilst I was using a site for streaming