Substitution exit for asset master is not getting triggered.

Hi
I have created a substitution exit program ZGGBS000 having exit U215 and U216. If the Asset affirm value is initial , then WBS elemnt value will copied to asset affirm value field in the table ANLA.But it is not getting tiggered, when i am trying i save the asset in AS01 tcode. Kindly help.
Thanks
Subha

Hi,
Please try thes exits:
Enhancement     AIST0001     Exchange number range in master data maintenance                    
Here we can export both   ANLA-ANLN1  ANLA-ANLN2 and Import  VALUE(I_ANLA) LIKE  ANLA STRUCTURE  ANLA
AIST0002  Customer fields in asset master
Alternative exits:
AFAR0003 External changeover method
AINT0005 Dummy for extended syntax check. Do not use.
AISA0001 Assign Inventory Number
TRAN0001 User exit for asset transfer
AAPM0001 Integration of asset accounting and plant maintenance
AIST0002 Customer fields in asset master
AMSP0002 Determine relationship type for two company codes
AIST0001 Exchange number range in master data maintenance
AFAR0004 Determination of proportional values for retirement
AINT0004 Change amount posted for certain areas
I hope this may helpfull.
Thank  you,
Thanks,
AMS

Similar Messages

  • Multiple Number Ranges for AP Document Type not getting triggered

    Hi all,
    We are posting receivables in the system using BAPI_CTRACDOCUMENT_CREATE. We have huge data of 3.9 million records for which receivables has to be posted. So multiple number ranges has been configured in the system for AP document type.
    The issue is even though multiple number ranges for mass processing are configured in the below location in SPRO, none of them are getting triggered. The number range at the first level on the screen is only getting triggered, due to this it is taking lot of time to post documents. Any help on this?
    Financial Accounting(new)
         Contracts Accounts Receivable and Payables
         BasicFunctions
         Postings and Documents
         Document
         Maintain Document Assignments
         Document Types
         Maintain Document Types and Assign Number Ranges
    Regards,
    Karthick.

    Karthick:
    Mass ranges are only used for FICA parallel mass activities.  For your situation, you can define and assign multiple ranges for individual processing in the same IMG activity.  Those would then be chosen for your mass postings.
    regards,
    bill.

  • Integrating MDG in Financial Self Service for Asset Master Data creation in CRM portal

    Hello Experts,
    I have a requirement in CRM box.
    If we navigate to SAP menu we have Self Service -> Financial Internal Self Services.
    Then a portal page will open in browser. There we have link Master Data Services.
    In that link we have standard sublinks for some financial master data creation.
    This is coming from LPD_CUST(Launchpad Customizing) -> FINISS. In this Master Data Services we have to create new link for "Create Asset".
    We can't go for Transactional iView. We have to choose Application Type as Web Dynpro ABAP only as present in standard links.
    And in the Application USMD_ENTITY_VALUE2 should be present as generic UI component.
    But after that what needs to be done for asset I am not getting. We have to do some config for component for web dynpro component, entity types, UIBB etc. InSPRO also, Cross-Application components ->Process and tools for Enterprise Applications -> MDG -> General Settings also we have to do something. I have collected info in isolated way.
    How to approach for this. Please suggest.
    Regards,
    Somnath Mitra

    Hello Experts,
    I have a requirement in CRM box.
    If we navigate to SAP menu we have Self Service -> Financial Internal Self Services.
    Then a portal page will open in browser. There we have link Master Data Services.
    In that link we have standard sublinks for some financial master data creation.
    This is coming from LPD_CUST(Launchpad Customizing) -> FINISS. In this Master Data Services we have to create new link for "Create Asset".
    We can't go for Transactional iView. We have to choose Application Type as Web Dynpro ABAP only as present in standard links.
    And in the Application USMD_ENTITY_VALUE2 should be present as generic UI component.
    But after that what needs to be done for asset I am not getting. We have to do some config for component for web dynpro component, entity types, UIBB etc. InSPRO also, Cross-Application components ->Process and tools for Enterprise Applications -> MDG -> General Settings also we have to do something. I have collected info in isolated way.
    How to approach for this. Please suggest.
    Regards,
    Somnath Mitra

  • Exit Class for Inbound Mail not getting triggered

    Hi Gurus,
    I have created an exit class for processing the Inbound Mail that comes to SAP Inbox (SOIN).
    I have set up the Inbound processing rule in transaction SO50 and set it to all recipients.
    If i send a mail from any external id to the id configured in SAP then it is coming in SAP Inbox (SOIN) but the exit class for processing the email is not getting triggered.
    I have made all the settings for SMTP.
    Kindly guide me with the steps needed to be followed for triggering the Exit Class.

    Hi
    Check u have maintained ur outgoing mail server IP in SCOT transation.
    Check link step to configure PO mail.
    http://architectsap.com/blog/sap/sap-mm-purchasing-send-purchase-order-by-mail-to-vendor-in-sap/

  • Error when creating a bdc for asset master upload

    I am getting a warning message (AA186), when changing the depreciation start date to capitalization date. It says,
    "Different Order Dep. start date in depreciation area 01. Check"
    This error is a problem in creating the BDC for asset master upload. We have only one depreciaton area 01 (book dep).
    Please help.

    This is normal message you get when you try to change depn start date. I think this should not be a problem for BDC posting. This message can always be bypassed.

  • Enhancing tabstrip for asset master

    Hello,
    I need to create an extra tab in a tabstrip control in Asset Master (tcode AS03). To that tabstrip I have to add 4 fields, the struture for which was already defined in customer include (CI_ANLU).
    Fields in CI_ANLU:
    ZZACQMETH
    ZZMOVATT
    ZZCUSTOD
    ZZPURPOSE
    How do I go about accomplishing this?
    Thank you

    Hi Andrei,
    Below are the possible enhancements for the transaction AS03.
    AAPM0001 - Integrtn of asset accounting and plnt maintn.
    AFAR0003 - External changeover method 
    AFAR0004 - Determnt. of proportional values for retirement
    AINT0004 - Change amount posted for certain areas
    AINT0005 - Dummy for extended syntax check. Do not use.
    AISA0001 - Assign Inventory Number
    AIST0001 - Exchange number range in master data maintan.
    AIST0002 - Customer fields in asset master
    AMSP0002 - Determn. relationship type for 2 company codes
    TRAN0001 - User exit for asset transfer  
    In this I think the enhancement <b>AIST0002 - Customer fields in asset master</b> will solve your purpose.
    Check the Documentation avaliable for this enhancement in SMOD and create a project in CMOD.
    Reward me if the points are valuable.
    Regards,
    Prakash.

  • FD33 - Receivable Field in Customer master is not getting updated

    FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
    In SD, we are having the item category but i am not getting how to control for FI documents? How can i make them credit relevant item. Also for special item, we are controlling the same through Transaction code : OBXY - by special GL indicators but what about the normal/general item?
    How can I control the general FI documents having various FI documents type as relevant to credit check?

    Apart from the above,please also check the below:
    FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
    As per me there is no specific control to active the credit active field in FI values unlike for updating the sales values in FD32 we activate credit active for the item cat(VOV7) which will ensure the sales values to update (open order, open delivery and open invoices) in to credit management.
    For FI values to update i think this is inbuilt in the program only.( example update group 000012,15,18 etc).
    Any way coming into query not updating the receivables, please check the below points once again.
    1. Check the whether invoice has accounting document generated or not, make sure that it is generated then only system update the receivables.
    2. Even if the above all points are checked including above all posts,then also still the same issue repeating  then try to run the program RVKRED77, before this first run RVKRED88 and compare this values with FD32.
    thanks,
    Srinu.

  • IDOC - Function Exit not getting triggered

    I am doing an inbound IDOC for the message type WMMBXY and using basic type WMMBID02.
    This is for goods movement based on PO.
    I  am doing an enhancement in the includeof the function module exit EXIT_SAPLLMDE_002.
    This exit is supposed to get triggered for the message type WMMBXY.
    when i tested the idoc in we19 it is sucessfully getting posted. I want to check my code in EXIT_SAPLLMDE_002. I have set breakpoint and tested using we19. But this is not getting triggered. But the idoc is getting sucessfully posted but with a status message 56 An inbound partner profile could not be found( I am not sure if this has something to do with above problem).

    Did you attach your exit to a CMOD project and activated the same(CMOD transaction)?
    The error you see regarding the partner profiles is probably due to the non existance of a partner profile for your idoc type in we20 transaction.
    Maintain the inbound partner profile in we20 transacttion.

  • User Exit not getting triggered

    Dear all,
    we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
    for this, i had done the following things:
    1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
    2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
    (User exit, project eveything).
    Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
    Can anyone please guide me where i might have gone wrong?
    Thank you,
    Regards,
    Lakshmi

    Hi,
    HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
    First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
    Reward is useful.
    Regards,
    Harsha

  • User-exit not getting triggered in VA32

    Hello Experts,
    Iu2019ve a requirement and Iu2019m working on Change Scheduling Agreement u2018t-code VA32u2019. According to requirement I need to capture all header data and data in Sales, Item Overview, Item Detail and Ordering party tabs. Iu2019ve set the break points in almost all the user-exits but only one FM (EXIT_SAPLV45L_002) of exit u2018V45L0001u2019 is getting trigger. Even though other exits/FM has all the tables as import/export parameters which I need but they are not getting triggered. Can anybody please tell me which user-exit / BADI I should use to capture the required data?
    Thanks.

    Hello Experts,
    Thanks a lot Vijay for you reply. Iu2019ve seen user exits of MV45AFZZ include and looks like USEREXIT_SAVE_DOCUMENT_PREPARE is the correct user exit. But I havenu2019t use Includes before can you or anybody else please tell me how to write code in include. I know how to search an include in a program but not sure how to add code in the user exit.
    Thanks

  • Is it have some User exits for Vendor master  trigger when click some field

    Dear Experts,
         I would like to know Is it have User exit for Vendor master  trigger when click some field in Vendor master? not just User exit for Prior Save . Please kindly let me know some solution for this case.
         Many thank.

    Hi,
    check may this bapi will be useful your requirements, BAPI_VENDOR_CREATE
    below links may helpful for you:
    BADI http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm http://support.sas.com/rnd/papers/sugi30/SAP.ppt http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm http://members.aol.com/_ht_a/skarkada/sap/ http://www.ct-software.com/reportpool_frame.htm http://www.saphelp.com/SAP_Technical.htm http://www.kabai.com/abaps/q.htm http://www.guidancetech.com/people/holland/sap/abap/ http://www.planetsap.com/download_abap_programs.htm http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm USER EXIT http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sapgenie.com/abap/code/abap26.htm http://www.sap-img.com/abap/what-is-user-exits.htm http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction http://www.easymarketplace.de/userexit.php http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sappoint.com/abap/userexit.pdfUser-Exit http://www.sap-img.com/ab038.htm http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sap-img.com/abap/what-is-user-exits.htm http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html Rewards if useful......... Minal
    still if you not find any solution go for  custom exit, means in standard program only ABAP consultant change the program where you required, it is little risk, you have to do the more testing for this
    BR:
    Venkat.Gurram

  • Userexit not getting triggered for  0CFM_CLASS_MASTER_DATA_ATTR

    Hi Experts,
    I have made enhancements to  0CFM_CLASS_MASTER_DATA_ATTR & 0CFM_FI_TRA_ATTR in RSAP0001(EXIT_SAPLRSAP_001). I have set the flag to New Data entry logic(Switch for Datasource feed) to populate the Timedependent attributes in  0CFM_CLASS_MASTER_DATA_ATTR .
    I kept the break point in the Userexit and ran RSA3 for the above 2 datasources but the user exit is not getting triggered.
    Can you please help why the userexit is not getting triggered?
    Thanks,
    bwuswer14.

    Hi,
    Thanks for ur post.issue resolved.im keeping the breakpoint in 1st user exit.After keeping the breakpoint in EXIT_SAPLRSAP_002 it got triggered.Closing the thread.
    Thanks,
    bwuser14

  • Outbound IDOC not getting triggered while new master data is created

    Hi Experts,
    I am trying to trigger an outbound idoc for Cost Center master data when ever cost center is being created or cost center is being changed. (Usinf COSMAS)
    I have successfully made use of change pointers and now able to trigger the idoc when ever Cost Center is getting changed. But while creating new Cost center, IDOC is not getting triggered.
    I used the function module MASTERIDOC_CREATE_SMD_COSMAS for triggering the idoc.
    Could one of you please let me what would have gone wrong? Since IDOC is getting triggered while changing the master data but not getting triggered while creating new master data.
    Thanks in Advance,
    Vinoth

    Hello,
    when you activate BD21 for a message type, it creates a entry in the SAP tables. that these Cost Centers have been sent already and any susequent changes to this will trigger a IDoc.
    As for BD16, scheduling it wont help as, you need to specify the selection criteria, and i do not see how you will be able to dynamically get the selection criteria.
    Try BD95, and BD59 to create a change pointer for a field, so when ever this fields is modified (new/updated) an idoc will be triggered.
    regards,
    Abhishek

  • Event not getting triggered for a few users in production

    Hi Experts!!
    We have a workflow that gets triggered on the event REQUESTCREATED of BUS2089. In production, we see that for a few users the event is getting triggered and even the workflow is. But for a few users, the workflow is not getting triggered. However, we didn't check SWEQADM yet and are waiting to get auth to check the same. But before that, I need your valuable suggestions on this.
    When I check SWEL, I cannot see any entries at all. Not even for the successfully processed ones.
    Auth objects cannot be a reason, as all the users have same auth. Please suggest me on what else can be the reasons.
    Your help is highly appreciable.

    Hello Srinivas !
                  Check in SWEQADM to know whether the event is on queue.If so, redeliver it.
                  If there is no event on queue, check the RFC queue( transaction SWU2 ) and ST22 for possible ABAP dumps.
                  Call work item list report (transaction SWI1) and check event linkages (transaction SWETYPV )of the users for whom the event is not triggered.Are you using BAdI or user- exit to trigger the workflow ? If so, check whether those are in active state.
                 Refresh the workflow buffers(transaction SWU_OBUF).Check either of the workflow versions are in active state.
    Regards,
    S.Suresh

  • Issue in Production for Workflow not getting Triggered .

    Hi Guys,
    I have a workflow, which is properly triggering in the development and Quality but not getting triggered in the Production. Can't get the Exaact reason because by using T-code PFTC when i test the workflow independantly its working properly and even BOR does not have any problem. Please Help me guys as this is a issue in Production.
    The workflow is a customized one, It getting triggered throught the funtion call in User Exit of MM01.
    Thanks

    It getting triggered throught the funtion call in User Exit of MM01.
    1. I hope the workflow customization is done properly in production system, as you stated that if you are trying to trigger from PFTC then it is working fine, can you please try to Refresh Organizational Environment  from SBWP ---> On MEnu  ---> Settings  --> Workflow Settings  ---> Refresh Organizational Environment and  secondly try to refresh the buffer from txn SWU_OBUF
    2. Make sure the user exit is transported to Production.
    3. Check the workflow log from the txn SWIA  if you have proper authorizations for the userid.

Maybe you are looking for

  • How do I block Roblox tab from opening In Safari 7.0.4?

    Since last night, http://www.roblox.com has been popping up in a new tab in Safari. I can't find anyway to block it. It's a tab -- not a new window. I can't get in touch with their support unless I sign up for the game. Which I'm not going to do. It'

  • Trying to update OS 5

    Hi, I am trying to update my OS from 4.6.1286 to version 5. I was unable to locate a proper OS for my country. I hold a Vodafone connection and from India. Please let me know how to choose the OS. Also, i tried using "Vodafone Essar" for update but i

  • Trouble connecting to Iphone software update server

    I am trying to update and Iphone4. When I try to download the new OS 5.1. Itunes tells me its having trouble connecting to the Iphone software update server and to check network connections or try again later. I have turned off virus software I am ru

  • ISight is not working after upgrade to Mountain Lion.

    Please help! After upgrade to Mountain Lion, Skype, Photobooth and etc can't detect iSight.

  • PDF visibility issue in Firefox and Safari on MAC

    Hi Guys, I am using iframe to embed pdf in html:- <iframe visible="true" id="ipdf" src="pdf/filename.pdf" height="600" width="665" runat="server" frameborder="0" scrolling="auto" allowtransparency="true"> </iframe> My problem is in some browsers it a