Substitution not carried out when WBS is added to an existing project......

Hi, I have created a substitution rule to substitute the investment profile in my projects with a blank for any WBS which is not level one.   I am not sure why this rule does not take effect immediately a new WBS is included.  When I try to carry out the substitution manually, I get the error message 'Error when processing asset under construction (AuC) for WBS element'. Any ideas how I can get this substituion to work when a new WBS is added to an existing project?

You should use the substitution otherway....
I believe your project is in REL status and also you have defaulted IM profile in the project, so whenever you create a WBSE, the IM profile is inherited to the WBSE and since it is in REL status, the system will create an AUC based on your IM profile and now you are using substituition to remove the IM profile so this will cause the problem...Instead of this....try this...do not default IM profile in project, and instead of removing IM profile for all WBSE which is not level 1, use substitution to write IM profile in WBSE which is only level 1.

Similar Messages

  • Invoice corrections Sales order- New Pricing is not carried out

    Hi All,
    waiting for some one to guide me in a right way...
    I have Scenario where creating a invoice correction request with reference to Invoice document.New pricing is not carried in debit line item even though i changed the pricing date as current date for the line item
    When i copied with the invoice document, 2 new line items are created with a same price conditions.
    1st line item is a credit and 2nd line item is a debit item.
    I need to do a price adjustment in debit line. So i maintained a new pricing record for the material to carry out the price.
    To achieve this in customizing VTAF (billing to sales) I have  tried multiple options  as below in  2nd pricing type field as B,C,D,E and F
    2nd Pricing type  - B Carry out new pricing
    C     Copy manual pricing elements and redetermine the others
    D     Copy pricing elements unchanged
    E     Adopt price components and fix values
    F     Copy pricing elements, turn value and fix
    But still the new pricing is not carried out.I tried to manually change the Pricing date in the line item level, still the new price is not updated in the order.
    I have seen SAP Help in below link the Debit line can update with correct price point 3 in proces flow , check this below link for reference.
    http://help.sap.com/saphelp_46c/helpdata/en/dd/55feeb545a11d1a7020000e829fd11/content.htm.
    Please help...
    Regards,
    Parthiban

    Hello Parthiban,
    I feel you are aware of the effect/functionality of 2nd pricing type.
    In the invoice correction request, two items are automatically created for each item in the invoice to be copied (which you did mention):
    - first item:   credit memo item
    - second item:  debit memo item
    And for invoice correction request, a particular pricing type is needed for the second item.
    So as per standard, you have to use pricing type 'E' for the credit memo item to guarantee that the item will not be changed.
    And you should give a new pricing type to the debit memo item. 
    The system creates a credit or debit memo depending on whether a postive or negative difference is generated.
    So that means
    Pricing type will effect ItemCat Proposal-G2N
    and 2nd pricing type will effect 2ndItemCatProposal-L2N
    Now, make changes in pricing type based on your business requirement.
    I hope this will assist you in understanding.
    Thanks & Regards
    JP

  • Order can not carry out revenues

    Hi Experts ,
                      I was trying to release production order and got message no valuation variant is assigned . Even after assigning it in opn2 and reading PP master data it is showing same error .
    Also while doing goods receipt ( MB1A ) I am getting error : Order 600003045 can not carry out revenues .
    Please guide
    Thanks
    Neal

    Hi neal
    As per controlling config. Planed cost has to be calculated during release are create of prod order. For that you have to assign costing carriant in OPL8. both for Plan and actual . in standard SAP PPP! is costing variant for plan and PPP2 is costing variant for actual.
    For this costing cariant you have to assign costing type and valuation variant.
    Please do it SPRO-Production-SFC-Integration-Order costing
    Do these setting.
    Standard valuation variant for PPP1 is 006 and for PPP2 is 007.
    Regards
    J. Saravan

  • I keep notes on about 300 topics on iPad Notes.  Occasionally, when I go into an existing note to add details, the note cuts out when I begin to add text.  This is now happening every day. How do I fix this?

    I keep notes on about 300 topics on iPad Notes.  Occasionally, when I go into an existing note to add details, the note cuts out when I begin to add text.  This is now happening every day. How do I fix this? 

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • Warning could not carry out all normings

    Hi Experts,
    why would a user get the following error in BEx?
    "warning could not carry out all normings"
    Thanks
    Dave

    Hi,
    I think in this case there might have been norming set up in the query, or that some one accidentally set the norming on in the calculation.  You can always switch this off at the workbook.  At any query cell, right-click > ALL CHARACTERISTICS > NORMALIZE > NO NORMALIZATION.  The error should then go away.
    Cheer,
    Gimmo

  • Why can i not call out when in roaming but can recieve calls

    why can i not call out when roaming and my data shuts off but i can recieve calls

        rhondahuffman1,
    These are great question and we definitely want to help out! For starters, what model of device are we working with? Are you roaming outside of the country or is the device stating roaming within certain areas? What's your zip code? Happening in specific locations? Share some details, so that we may assist.
    AdamG_VZW
    Follow us on Twitter @VZWSupport

  • Captivate 8:  Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

    Captivate 8:  Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

    Out of curiosity, some here have recommended renaming an EXE file behind the scenes to eliminate that firewall message when starting up. Are you one of those folks that tried this? My thought is that if so, perhaps this is a result?
    Cheers... Rick

  • I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

    I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

    To move an iPhoto Library to a new machine:
    Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
    But however you do choose to link the two machines...
    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
    and select the Library that you moved.  That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.
    Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
    Your second option didn't work because you simply referenced her library on the old machine.
    Regards
    TD

  • Creation of a new wbs elements to an already existing project

    1. i am using BAPI_BUS2054_CREATE_MULTI to create a new wbs element in an already existing project.When this is done then i am using BAPI_PS_PRECOMMIT and then bapi_transaction_commit
    so this creates the wbs element which i guess but only the element.
    2. Now i need to attach the networks to it which are there in BOM so i am taking all the network data from the table afko joining it with aufk.It is giving all the network data which was there attached prior to the project but the new one it is not showing.The query is
    SELECT afkoaufnr afkopronr aufkpspel aufkktext aufk~loekz
    INTO (afko-aufnr, afko-pronr, aufk-pspel, aufk-ktext, aufk-loekz)
    FROM  ( afko AS afko INNER JOIN aufk AS aufk ON aufkaufnr = afkoaufnr)
    WHERE afko~pronr = w_wbs_cur-psphi.
    3.Now i am comparing this data from above to the BOM data and take the difference of the networks which are to be created.
    But as the above query is not returning the new wbs so it is getting failed.

    i am already using this
      CALL FUNCTION 'CONVERSION_EXIT_KONPD_INPUT'
        EXPORTING
          input     = g_znpsdata_old-project_definition
        IMPORTING
          output    = w_wbs_cur-psphi
        EXCEPTIONS
          not_found = 1
          OTHERS    = 2.
    do i need to use the other one also

  • Do not carry out new pricing when plant change in sales order

    Hi,
    I have one z field in additional data tab in sales order. This field store the original plant if anyone has changed plant in Sales order. My requirement is to trigger the pricing in sales order with this old plant. I am not getting any exit for this.
    Suggest me the solution.

    Hi
    In the comments for the subroutine, it says:
    *       Parameter new_pricing controls the new pricing in the calling *
    *       form. It can be filled according the the allowed values       *
    *       of domain KNPRS (Pricing type), for example:                  *
    *       ' ' = no new pricing                                          *
    *       B   = Carry out new pricing                                   *
    *       C   = Copy manual pricing elements and redetermine the others
    So, you must write:
    If VBAP_WERKS NE *VBAP_WERKS.
      new_pricing = 'B'.
    Endif.
    Regards
    Eduardo
    Edited by: E_Hinojosa on Aug 25, 2011 8:21 AM

  • Error "Multi-level error propagation carried out" when I run a report

    Hi All,
    When I run the report /SAPAPO/CDPS_REPT - Order and Resource Reporting with the below criteria I getting error "Multi-level error propagation carried out"
    Planning Version - Simulation Version XXX
    Evaluation Start - 05/03/2011
    Evaluation End - 12/31/2013
    Evaluation List - Extended Operation List
    I do not get error when I run the report with selection as Active version 000 and Evaluation List as Order List, Operation List.
    I have tried by ruuning Live cache consistancy check, but the issue is not fixed
    Please help me to resolve this issue
    Thanks & Regards,
    Rajkumar

    Hi Jack,
    Please do post the server log file here so that we can try and find a solution for the problem you are facing.
    I had a problem a while ago with the app server too. While trying to run an application, after a few times, it would give me an error message saying the Application Server cannot be started. I rebooted my machine and thankfully it worked again. Just try this too and see if it works.
    If it doesnt we can go through the server log and try to identify the cause of the problem.
    Cheers :-)

  • Scheduling not carried out in BAPI_PROJECT_MAINTAIN

    Hi All,
    I am facing a problem that while updating the basic start date and basic end date for WBS elements using BAPI_PROJECT_MAINTAIN, the scheduling is not being carried out. Basic dates of WBS Elements are saved properly. But the project start date and end date are not updated accordingly.
    I am passing the following inputs:
    I_PROJECT_DEFINITION = <Project Number>
    I_PROJECT_DEFINITION_UPD-PROJECT_DEFINITION = 'X'.
    I_PROJECT_DEFINITION_UPD-START = 'X'
    I_PROJECT_DEFINITION_UPD-FINISH = 'X'
    I_WBS_ELEMENT_TABLE-WBS_ELEMENT = <WBS element Number>
    I_WBS_ELEMENT_TABLE-PROJECT_DEFINITION = <Proj Defination>
    I_WBS_ELEMENT_TABLE-WBS_BASIC_START_DATE = <Basic Start Date>
    I_WBS_ELEMENT_TABLE-WBS_BASIC_FINISH_DATE = <Basic End Date>
    I_WBS_ELEMENT_TABLE_UPDATE-WBS_ELEMENT = 'X'
    I_WBS_ELEMENT_TABLE_UPDATE-PROJECT_DEFINITION ='X'
    I_WBS_ELEMENT_TABLE_UPDATE-WBS_BASIC_START_DATE = 'X'
    I_WBS_ELEMENT_TABLE_UPDATE-WBS_BASIC_FINISH_DATE = 'X'
    I_METHOD_PROJECT-REFNUMBER = '00000'.
    I_METHOD_PROJECT-METHOD = 'SAVE'.
    I_METHOD_PROJECT-REFNUMBER = '00001'.
    I_METHOD_PROJECT-OBJECTTYPE= 'WBS ELEMENT'
    I_METHOD_PROJECT-METHOD = 'UPDATE'
    I_METHOD_PROJECT-OBJECTKEY = <WBS element number>
    Please let me know the resolution to this problem.

    Hi All,
    I am facing a problem that while updating the basic start date and basic end date for WBS elements using BAPI_PROJECT_MAINTAIN, the scheduling is not being carried out. Basic dates of WBS Elements are saved properly. But the project start date and end date are not updated accordingly.
    I am passing the following inputs:
    I_PROJECT_DEFINITION = <Project Number>
    I_PROJECT_DEFINITION_UPD-PROJECT_DEFINITION = 'X'.
    I_PROJECT_DEFINITION_UPD-START = 'X'
    I_PROJECT_DEFINITION_UPD-FINISH = 'X'
    I_WBS_ELEMENT_TABLE-WBS_ELEMENT = <WBS element Number>
    I_WBS_ELEMENT_TABLE-PROJECT_DEFINITION = <Proj Defination>
    I_WBS_ELEMENT_TABLE-WBS_BASIC_START_DATE = <Basic Start Date>
    I_WBS_ELEMENT_TABLE-WBS_BASIC_FINISH_DATE = <Basic End Date>
    I_WBS_ELEMENT_TABLE_UPDATE-WBS_ELEMENT = 'X'
    I_WBS_ELEMENT_TABLE_UPDATE-PROJECT_DEFINITION ='X'
    I_WBS_ELEMENT_TABLE_UPDATE-WBS_BASIC_START_DATE = 'X'
    I_WBS_ELEMENT_TABLE_UPDATE-WBS_BASIC_FINISH_DATE = 'X'
    I_METHOD_PROJECT-REFNUMBER = '00000'.
    I_METHOD_PROJECT-METHOD = 'SAVE'.
    I_METHOD_PROJECT-REFNUMBER = '00001'.
    I_METHOD_PROJECT-OBJECTTYPE= 'WBS ELEMENT'
    I_METHOD_PROJECT-METHOD = 'UPDATE'
    I_METHOD_PROJECT-OBJECTKEY = <WBS element number>
    Please let me know the resolution to this problem.

  • The error showing as Fiscal year change has not carried out for the coCd

    Hi all,
    I am facing a very critical situation. My client has the last closed fiscal year as 2006(from 2006 april to 2007 march).For the fiscal yr. 2007(2007april to 2008 march) they have already finalised and submitted the reports made from some parallel software.They now want to tally this report with SAP system and to adjust the SAP system entries as per this report.This work was running fine.But on 01.04.2009 none of the asset reports are running.The error it's throwing is as-
    Fiscal year change not yet made for company code PWAL
    Message no. AB059
    Diagnosis
    You have not yet carried out a fiscal year change for company code PWAL, although the current system date is in the new fiscal year.
    Procedure
    Carry out the fiscal year change for company code PWAL.
    Proceed
    The error is quite understandable.We have to close 2007 and then perform the fiscal year change.But the problem is that the adjustment for the year 2007 is not yet complete.Is it the only solution with me that I should close the yr.2007 and again open it after the fiscal yr. change? If that is done can I take care of the adjustment in the posted depreciation? Or is it possible that the system date can be made back to 31.03.2009(very stupid ask!). The real problem is that my client has mistakely created some assets in the year 2007(by AS91 after changing the take over date) those should have been shown in the next year and also some assets are creted in the year 2008 by the same strange method those should be shown in the year 2007.What I am doing now is deleting these legacy assets and creating the new assets in the correct year.And this process is not yet complete.If I close the year 2007, then the depreciation of these legacy assets will also be posted.Later how can I reverse the effect?Also without seeing the reports I can't make the adjustments.Please suggest/advice.
    Debabrata

    Hi Debabrata,
    You have to do all fiscal year closing steps for 2007. When you reopen it you can do a repeat run for 2007. (You can do the reapeat run only for the new/ changed assets.)
    Try first to test this in an actual test system (document it and do the same in production). Perhaps as you know when 2009 is open I want to close 2008 in one week.  All changes they make in the asset system (change depreciation keys, recalulating,...) can result in postings in 2007 / 2008 what they don't want and later fiscal year problems. You will found a lot off masages about this on the form.

  • Changes that i make to song display in iTunes, will not carry over when I sync to my ipad. This is only since i upgraded to ios7 and downloaded the latest itunes. Any ideas why?

    I use my iPad for music when i teach my dance class. The default layout in the music program on iPad is: song title, artist and album. I need the name of the dance, so in iTunes, I right click on the song title, then choose "get Info".  I then edit the info and under album title I write in the dance name. Then when i sync the iPad still has the same three columns, but the info i need displays under the album column.  UNTIL i upgraded to ios7 and installed the latest iTunes.  When I synced last night, after adding new music, the songs that were already in the playlist, stayed the same. ALL the new songs were placed in the playlist but none of the info that i edited synced.  It shows it as i want it when i look at the playlist in iTunes, but it does not carry over after the sync. 
    I hope this makes sense and does anyone have any idea why?

    Amazing! I'm a dance instructor and am doing the exact same thing as you - and not seeing what I need on my iPad Air ... I can't believe there has been no reply on this! I also can't believe there isn't an easy way of seeing track info in the iPad or iPhone but I've spent hours searching and am not finding anything

  • How to get a cell in a table NOT to expand when text is added in Acrobat?

    In one row I have one cell that expands the row height when text is added in Acrobat.  The cell next to it with what seems to be the same characteristics does not.  I have copied that cell onto the cell that expanded - but it is still expanding.  What attribute needs to be changed?  Thanks.

    Just found "Expand to fit" checked in layout - sorry for inquiry.  Thanks for being there.  Tucson102

Maybe you are looking for