Subtitles: DVDSP 3.x hangs up by working with 25 clips

Hi,
I´ve got a Problem with DVDSP creating subtitles.
A Project with 25 short interviews, one longer Clip and a few menus. I imported the subtitles (.stl-format). No problem. But when working with these titles in the timeline (moving, trimming) the program often hangs up. Sometimes I can do some two or three actions - then the program hangs.
Moreover, now that I got all the titles doen, I tried to burn a disc. The subtiltes appeared - but the size was wrong. I worked with 26-point dot height, but the titles seem to have 30 or 32 now - the titles now have different spacing.
Any Idea? By the way - it´s DVDSP 3.x
Thanks in advance,
thommes
g4 Mac OS X (10.3.9)

In https://bbs.archlinux.org/viewtopic.php?id=130309 the first link is to https://wiki.archlinux.org/index.php/Forum_Etiquette where you can read about
https://wiki.archlinux.org/index.php/Fo … s_and_Code
No big deal.
Have you tried using just vesa to see if you can start X this way?

Similar Messages

Working with clips in imovie, deleting from the middle

not finding this very intuitive ... I want to delete a selection from within a clip ... also want to know how to split clips ... I select the section I want to work with but all the options are ghosted in the menus ...

not finding this very intuitive ... I want to delete a selection from within a clip ... also want to know how to split clips ... I select the section I want to work with but all the options are ghosted in the menus ...
iMovie '08 is basically a non-destructive, by-reference editor. It is not necessary to physically split or delete portions of your files. The "Split" Edit option is only available when an event clips is placed in the project window. Easiest way to delete a selection from within a clip would be to
1) Move the clip to the Project window
2) Select/highlight the frame segment to be removed
3) Use the "cut" or "delete select" option (or "split clip) and delete key) to remove the unwanted content from your project

Working with clips

How can I join 2 clips? As I'm exporting footage from my camcorder, I'm getting a whole bunch of clips. How can the clips be joined so that they'll be easier to work with when it comes time to editing.

Welcome to iMovie Discussions.
You just drag your clips down to the 'Timeline' at the bottom of the iMovie window, and arrange them side by side. Then click on Play ..or press the Space Bar on your keyboard.
They play ..one after the other. Then you can drop Transitions (..fades, etc..) between them to melt them into each other.
Why not have a look at Apple iMovie Tutorials?
Then, when you want to go further, read all of Dan's 'Unofficial' iMovie FAQ', where he gives the answers to all sorts of possible problems.
Good luck.
[You beat me to the draw, catspaw!]

Rman backup command hangs for datafile ,works with archivelogs backup.

Issue is archivelogs backup is going fine ,But when we go for datafile backup its hanging there from oracle side as not able to give file handle.
RMAN session started with debug it gives only
DBGRPC: ENTERED krmqgns [expect.cpp/673]
16:00:40.19 DBGRPC: krmqgns: looking for work for channel default (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: krmqgns: commands remaining to be executed: (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: CMD type=backup cmdid=1 status=STARTED [expect.cpp/673]
16:00:40.19 DBGRPC: 1 STEPstepid=1 cmdid=1 status=STARTED [expect.cpp/673]
16:00:40.19 DBGRPC: krmqgns: no work found for channel default (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: EXITED krmqgns with status 1 [expect.cpp/673]
16:00:40.19 DBGRPC: krmxpoq - returning rpc_number: 17 with status: STARTED16 for channel sqlbt_ch1 [expect.cpp/673]
16:00:40.19 DBGRPC: krmxr - sleeping for 10 seconds [expect.cpp/673]
Is any body seen this type of message from rman.
Thanks
Shirish

OK. Did you miss the second Oracle document?
RMAN Debug For Backup Shows "krmxr: sleeping for x seconds" [ID 458259.1]
Also a ton of information here :
RMAN backup database as copy from file system to ASM diskgroup very slow
and here :
RMAN Error > Please assist!
and here :
RMAN and Amazon Web Services
http://oravdba.blogspot.com/2011_01_01_archive.html
Best Regards
mseberg

Working with clips, channels, and tracks

This question was posted in response to the following article: http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7f49a .html

Hi, I've been editing on FCP and just started working Premiere and I'm having a problem with audio channels, which I'm not sure is covered in the channel mapping explanation in this page. I'm importing my stereo clips using the stereo media as mono setting so I can edit the channels separately (I have dialogue on the left channel and nothing on the right), but when I export them they appear as two identical channels, with no left/right separation. Can anyone tell me what settings I need to use to keep the channels as discrete Left and Right stereo. If I have to map the tracks to tell Premiere which track plays left and right do I have to do this every time I start a new project? I didn't have to do this in FCP and it seems like there must be a less complicated and time-consuming way to make the program play the left channel out of the left speaker and the right channel out of the right speaker.

Working with clips in iMovie 4

Is it possible rotate a short clip that a new camera man shot sideways? He thought the subject fit better in the view finder on its side!

Hi Chuckey:
You can use QuickTime Pro: Movie / Get Movie Properties / Video Track/Size and then use rotate buttons. Or you can
get Simple Rotate, an iMovie plugin
Sue

Working with clips after audio has been extracted

Can anyone tell me if it is possible to trim clips once the audio has already been extracted? I have tried to do this, but the trimming only applies to the video strand, leaving the audio full length (an out of sync).
Or does any trimming have to be done before audio extraction?
Thanks.

Go into the "timeline" mode (as opposed to the "clips" mode). Place the playhead at the point you want to make the cut. Click on the video clip, and you will be able to "split" the video clip. Leave the playhead alone, then click on the corresponding extracted audio clip below the video clip. You will be able to "split" the audio clip. You may then want to "lock" the audio clip to the video clip at the playhead, so that it stays in sync.
If you already split the video clip and moved it, you may be able to re-sync it with the audio by dragging the audio clip in the timeline mode. In addition, if you set the preference to snap to the beginnings of clips, you should be able to accurately re-sync.

Working with clipping masks

I am unsure if this is a question regarding Photoshop or Illustrator but can anyone offer guidelines on how this image was created for the text to be behind part of an image but not all? Example image attached.

Gmez, you made a B&W layer on top, clipped to your text. So the B&W only shows up where the text is. I think it actually looks good, but it's not what you were intending to do. There are a couple of ways to do it. An easy way is to just rasterize your text layer, then put a mask on it (not a clipping mask) and paint out what you don't want. But this method is destructive, so if you want to change the type later you're SOL. For this, considering that you want the background desaturated anyway, I would just duplicate the base layer, put it on top, put a layer mask on it, and paint out the background so the text pops through where you want. It involves a little more masking, but if you do it that way then you can just put a desaturation layer below it, and now your foreground will be fully saturated and cover the text, while the background is desaturated.
Edit - scratch that, I guess you can put a layer mask on a text layer without rasterizing it. Learn something new every day. Just do that, paint out (with black) whatever you don't want on the text layer mask.
As to the desaturation. Try using an adjustment layer instead. It's non-destructive (you can reverse or alter it later) and takes less space in your final file (good practice for later when things get more complicated). Click on the bottom layer, then add a Hue/Saturation adjustment layer, and move the saturation down. Now on the mask on that layer, paint the foreground black to bring back the color. There are better ways to get black and white (that give you more control over your contrast and 'colors'), but hue/saturation is a good first step.
Edit: That magazine cover is hysterical.

What's the best set up to work with clips captured on iPad 2?

I got fop 7 5 months ago, never really used it yet, now I'm seen red lines all the time, unlike iMovie which plays all the clips back with out having to render all day long, I was wondering what settings I should use,
someone mentioned that it's probably a good idea to compress all the videos into one format, then setting fop to the same format to play them back real time, makes sense although I thought FCP normally plays all formats, in any case I tried going through topics here and it's all scattered information, can someone please clear this up, my end product is for you tube so it's not like a film or anything, I would use iMovie but I have green screen clips I need to superimpose etc.
Thanks in advance

You may find better advice on the iPad and iMovie forums. You are correct that FCP can handle almost any video format but you are incorrect in your assumption that FCP can play any format unless it is specifically set up to do so. FCP7 is more than 2 years old, it was created long before the iPda2's video shooting functions were available so there are going to be some bumps in yoru process.
This is a forum, not a dedicated help system. Like any pullet in board, information here is presented in discussions, often arguments. difficult to simply browse the hundreds of thousands of threads and expect to find useful information.
YouTube has tens of thousands of active iPad users. Have you tried searching youtube for tutorials on this very topic?
I do not know what format the iPad shoots. But you want to either transcode your video as it comes into FCP, transcode your clips after you've moved them to the Mac and before you bring them into FCP, or you must learn to set your FCP timeline to the same cocdec as your source files. All three of those operations are easily researched in the help system for FCP.
bogiesan

Advice for working with large clip files

A few years ago I made a movie using iMovie2. At the time I was working with clips recoded on one minidv disc. I am now ready to begin a project (just bought iLife06) that is much larger. I have roughly ten 60 min minidv discs. I am getting nervous about the amount of memory needed to import and work with this many clips.
Is it possible to import the clips to my external fire wire HD? Can I still work in iMovie while the project lives on the ext firewire drive? Can anyone tell me roughly how much memory is needed for larger projects like this? (I expect the final project will be 30-40 minutes).
Since the footage all comes from our European concert tour, it easily divides into 3 separate sections - would it be easier to create 3 different iMovie projects? Is it possible to combine them in the end to create one film?
Thank you so much for your help with this.
Sincerely,
Bob Linscott

Is it possible to import the clips to my external
fire wire HD? Can I still work in iMovie while the
project lives on the ext firewire drive?
Should be fine. I've been editing 4 hours worth of footage down to about 50 minutes, on a project stored on a FireWire 800 drive. FireWire 400 (if that's what you're using) is half the speed, but should still be fine, I think.
So, create a new project, save it to your external drive, and then import your footage into the project.
Can anyone
tell me roughly how much memory is needed for larger
projects like this? (I expect the final project will
be 30-40 minutes).
If you mean hard drive space for the project, I think you're talking about 11 GB per hour: so, in short, a lot. I think you could import your footage, edit a bit, and empty your trash to free up space, but iMovie does seem to keep your originals fairly relentlessly, so I'm not entirely sure.
Watch out for extracting audio from clips too: I've been doing this in order to do cross-fades, but it increases the size of your movie. I ended up buying a second, bus-powered 80 GB external hard drive just to hold the iMovie project
Since the footage all comes from our European concert
tour, it easily divides into 3 separate sections -
would it be easier to create 3 different iMovie
projects? Is it possible to combine them in the end
to create one film?
This could well be a good idea. Once your projects gets over a certain length, you may experience the "herky jerky" pkayback issue (search for "herky jerky" on these forums), making editing difficult. So three separate projects might be easier.
To combine them all at the end, you'll want to export the 2nd and 3rd projects as full quality DV (Share > QuickTime > Compress Movie For: Full Quality), then import them (File > Import) into your first project, and add them to the timeline.

Media Encoder CC hangs when working with 96/24 audio

Title says it all! Has anyone else had this problem with Media Encoder CC? I just upgraded from CS5.5 to CC, and there were no issues with encoding 96/24 audio with CS5.5. I can reduce the audio files to 48/16 and theres no issue, but all the asset files for audio are in 96/24 and I'd of course rather work with the high resolution audio. I've tried searching the interwebz on the issue but can't find anything specific to the audio causing Encoder to hang. Thanks!

Thomas Nord wrote:
Update: We have discovered an issue where you can get this behavior if the source is a Premeire Pro sequence whose sample rate doesn't match that of the clips in that sequence. The solution is to match the sample rate of your sequence to that of your clips. Please let me know if this does not resolve your issue.
Thanks,
Tom
I had some 96/16 audio from an H4n recorder. AME just sat there. Also had the same problem exporting directly from PPro without using AME. Just sat there, no error, just nothing.
Changed the final sequence samples to 96kHz sampling and problem solved. That's a real bummer, since Adobe definitely pushes the sort of "edit anything" mantra a lot, and having to tailor sequence settings to a recently added audio clip is a step in the wrong direction. Glad to know it CAN be fixed, since these renders need to happen, but need that one patched up.

I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from A

I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from Adobe and Windows. I have a new pc with window 8.1.

It could be a coincidence, but I rebooted the machine and (knock on wood) PSE13 seems to be working ok.

My iphone is hanging while working with whats up. kindly help

my iphone is hanging while working with whats up. kindly help

I assume you mean whatsapp.
First double click the home button and swipe the app closed.
If it still doesn't work try a reset. Press and hold the home and power buttons until the Apple logo appears. Release both buttons. Wait until your iPhone starts on it's own.
If whatsapp is still giving you problems try deleting and reinstalling the app.

Hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?, hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?

hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?, hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?

1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two and tap the minus sign to close app.
2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo

The user is hanging up around 3-4 hours into working with this transaction

The user is hanging up around 3-4 hours into working with this transaction(ZAP0009) They bring up the report and then drill down into a bunch of the POu2019s(around 80-100) and they keep applying filters as they go(keep adding certain POu2019s, Vendors, etc to the filter)

is this standard or Custom transaction, trace the user using ST12 and see whats happening.

Subtitles: DVDSP 3.x hangs up by working with 25 clips

Similar Messages

Maybe you are looking for