Subtitles get enlarged in 16:9 sequence

I have a PAL DV 4:3 project that I have been converting to 16:9. I created a new sequence and changed the setting to 16:9 anamorphic. The frame size is 720x576, aspect ratio CCIR 601/DV PAL (5:4), pixel aspect ratio CCIR 601 (720x576). I pasted all of the clips and scaled / stretched the clips accordingly. Everything is fine with the video.
The problem that I have is when I create subtitles they get enlarged and lose resolution. They display at the correct size in the viewer (which for some reason is 4:3) but when dropped into the timeline they automatically get enlarged. There is no scaling under the motion tab so I don't understand what's happened. I could reduce the font size but the problem is the loss of resolution which is noticeable on the finished DVD. Any thoughts?

They display at the correct size in the viewer (which for some reason is 4:3)
That's not correct. They should be displaying at 16:9 in the viewer, if they are correctly made and the settings are correct.

Similar Messages

  • In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

    In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

    If you think this is a bug, you can report it here:
    Apple - Mac OS X - Feedback

  • Get Comment from the Current Sequence

    Hi everybody,
    Just wanna know if it's possible to get the comment from the sub sequence like we can get the name using RunState.Sequence ?
    my test Name is the sub sequence name and the number associated is placed in the comment, that way I'm generating data to database autmatically.
    Pierre

    Hi Pierre,
    you can use "RunState.Sequence.AsPropertyObject.Comment" to get the comment of your SubSequence.
    Hope that helps.
    Regards
    MY

  • Problem accepting updates. Get a message "no valid sequence could be found."

    Automatic updates are not working. Get a message "No valid sequence could be found">

    If you are on Windows, download & run http://labs.adobe.com/downloads/acrobatcleaner.html
    then install the latest Reader version from http://get.adobe.com/reader/enterprise/

  • On my iMac my photos are in Pictures, not in iPhoto. They are numbered to keep them in sequence on my Imac, but they do not show in sequence on my AppleTV. How do I get them to show in sequence, (start of vacation to end of vacation) ? THANKS!

    Hello Support Group!
    All of my photos are in folders under the  "Finder", "Favorites", "Pictures" category on my IMac. ( Mac OSX version 10.7.5)  Each folder has sequentially numbered photos to keep them in order for viewing. For example, my folder titled " Travel - Hong Kong 2004" has 50 photos in it showing the trip from start to finish, each photo numbered 111, 112, 113, etc. I do not use any 0's, so the numerical sequence will go 118, 119, 121, 122. This process works well to keep the photos of my trip in sequence when I am looking at them on my IMac.
    When I watch the same folder on my Apple TV the photos are displayed randomly. The Apple TV is instructed not to shuffle the photos on slideshow. Can anyone tell me how I can get my photos to show in sequence on Apple TV?  My Apple TV is Model MC 572C/A and the software is 5.2.1 (6025) updated today. Thanks very much!
    Doug May

    I can't recall whether slideshows are ordered by title or date, but you can manually re-arrange the albums in iPhoto, then batch change them once you have the order you want.

  • Getting error while importing the Sequence

    All,
    I created a sequence in DB and using in ODI for row_wid col in DIM1.
    I used seqname.NEXTVAL for the col in DIM, interfacing running fine, data also loading.
    Dim, sequence is under Dev SCHEMA1.
    But when i export the scenario and run in the test repository, i am getting error.
    It is pointing to SCHEMA1.seqname.NEXTVAL. Not able to run the scenario. Ideally it should point to test schema.
    i have created seq in test schema also with the same name?. Can any one help me to get ridoff this error?
    thanks in advance

    You need to make sure that the relationship between your contexts logical schemas and physical schemas are set up consistently across the repositories so that the scenario can be run from either location.

  • How can I get the length of a sequence using script

    I am trying to get the length of an image sequence that was imported using importOptions.sequence.  I need to check that the length is a correct number, and if it is too short/long it gives an error message.
    Is there a way to do this?
    Thanks

    //Assumes that your clip is the first item in your project
    var a = app.project.item(1).duration;     //Returns clip length in seconds
    var b = app.project.item(1).frameDuration     //Returns a single frame length in seconds
    var c = a/b;     //If you divide the clip duration by the frameDuration, you should get clip length in frames

  • Is there any possibilities that the ipad screen get enlarged?

    Hello,
    For starter, I would like to say that I don't own a tablet yet.
    Now for the real question, with the new technologies everyday and with all the competition between the companies, is apple going to enlarge the size of the ipad screen or do they see it fine as it is?
    Its because every year or every 6 months there is a new product coming and the competition between the brands are getting higher and I cannot afford to change a product every year so how long should the ipad lives with me? And why I should choose Apple? (Beside the below message)
    What I liked about the Apple is the quality of built and apps, but in other brands I am finding larger screens higher performance and an external slot for an SD card to expand the memory.
    Thank you

    Nobody here knows Apples future plans.
    You can use an iPad for as long as you want. Nobody forces you to buy a new one every year. Apple usually provides OS updates to older devices for at least a few years.
    Buy the tablet that suits your needs best.

  • We have an iPod version 4.2.1 modelPB528ll. We can not get to play songs in sequence. Welcome suggestions.

    We have an ipod version 4.2.1 model PB528ll. We can not get the ipod to play songs in sequence. Welcome suggestioins.
    Thomas 28

    Do y have:
    - Shake to shuffle turned on? Settings>Music
    - Do you have shuffle turned on on the Now Playing screen? On that scree on the right side right below the scrubber bar is a crossed arrows icon. That is the Shuffle control. Tap till it is white for no shuffle.
    Next:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Wav file gets out of sync with sequence

    Hello,
    I have a 30min sequence that I sent the dialogue to an audio engineer for clean up as an OMF. He sent it back and it gets out of sync about the first 2 minutes or so. By the 30th minute the audio is out of sync about 47 frames.
    I've tried multiple things, couple of observations: the WAV file's waveforms in the timeline show that all audio is in sync, yet when I playback in the timeline audio its out of sync. I even opened up the wav file on Quicktime player and timecodes from quicktime player and my video timeline do match, its only when i place the wav file in the timeline that it appears out of sync.
    I've sent the whole sequence to Soundtrack Pro as a multitrack project. When I playback there it is in sync with the video!!! I export back and still same issue...
    Editing on a Macbook Pro OS X 10.8.4 2.6GHZ Intel Core i7 on FCP 6.0.6.
    The sequence settings: Apple ProRes HQ 25fps. Audio settings: 48 KHz, 16-bit, channel grouped.
    Wave file (sent by audio engineer): 16bit 48.000KHz. Data Rate: 1528.21 kbits/s
    Any help would be amazing!
    Thanks,

    One possibility
    You need to have your easy setup have a frame rate that exactly matches your sequence settings BEFORE you import the audio file.  Doesn't seem to always cause a problem, but it can happen.

  • Do changes in the unnested sequence get reflected in the nested sequence?

    I frequently work with multicam sequences and am trying to rid the audio tracks of delays between them. Even after syncing, a frames difference is audible as room sound. I know I can sync them tighter if I use the waveform. But I was wondering if I do this after I've nested the tracks, if this gets reflected in the nested tracks?

    Yes.
    From the help: "A nested sequence always represents the current state of its source. Changing the content of the source sequence is reflected in the content of nested instances. Duration is not directly affected."
    Adobe Premiere Pro Help | Create and change sequences

  • Get name of step's sequence

    Hi all,
    I have a test sequence which consists of a group of sub-sequences.  Each sub-sequence contains a set of steps which report results to my report file.  I've created a custom callback sequence (ModifyReportEntry) in order to modify the report body text for each step, but I'd like to include then name of the step's sequence in the report line for that step.
    I'm guessing that this property is somewhere in the Parameters.Result.TS realm, but can't figure out what it is.  (Using TS 4.1)
    Can someone help me out?
    Thanks!
    Jeff

    Jeff,
    You can use RunState.Caller.Parameters.SequenceName from your "ModifyReportEntry" Sequence File Callback. So the Statement expression would look something like Parameters.ReportEntry
    += "<tr><td>Sequence
    Name</td><td>"+RunState.Caller.Parameters.SequenceName+"</td></tr>". 
    Richard S -- National Instruments --Applications Engineer -- Data Acquisition with TestStand

  • IMac not getting very far into boot sequence.

    Hi,
    I can no longer get OSX to boot up much further than after initial screen where it makes the noise, and has the spinning icon, after that if moves to a blue screen, light blue, occasionaly the hard drive will make a noise as if it's accessing it, but that's all.
    Before this happened, I was looking at some files on an external hard drive, to try and get rid of them, they were both over a gig in size, that slowed the iMac down.
    I eventually managed to force quit a some applications down so that restart, and the above mentioned is the result.
    Any ideas?

    I was trying to avoid it as well, but if it gets it back up and running, till I have some free time, to back up stuff on the drive,... yess i do use time machine.. but there's other stuff on there I want another back up on it's own.
    I'll let you know if there are any further problems.

  • Watching iTunes-U videos, can I get them to play in sequence?

    I have several videos I set as iTunes-U. I want them to all play in order, one after another. Instead, one video plays & then it stops, I have to hit next & play each time.
    Is there a way to get them to all just play? Do I need to tag them as something else like TV Shows?

    Still no luck figuring this out. Hasn't anyone ever tried this?

  • Watching  videos, can I get them to play in sequence?

    I have several videos I set as iTunes-U. I want them to all play in order, one after another. Instead, one video plays & then it stops, I have to hit next & play each time.
    Is there a way to get them to all just play? Do I need to tag them as something else like TV Shows?

    I had this problem to fixed by selecting (get ifo - options -un tick the box that says skip when shuffling)
    And it should work

Maybe you are looking for