Subtotals in a Report SAP B1 2007.

Hi everyone;
I have a problem in a report in SAP Business One 2007 with Print Layout.
I need a subtotals for  each sort. For Example:
Alejandro     
1000     Close
                      1000     Close
Subtotal     2000     
     1000     Open
     1000     Open
Subtotal     2000     
Total     4000
Can you help me to find the solultion to solve my problem??
Thanks.
Alejandro.

Thanks Gordon and Rahul for your answers.
The field is Name of the table Sales Stage and my reports is group by this field but when i insert the formule with instruction of ColSum or PageSum its not do the subtotals for each group only Final Report.
Rahul, i have SAP Business One 2007 with print layout, Can I modify the report en crystal Reports??
Thanks
Alejandro

Similar Messages

  • Excel report in sap b1 2007

    Hai
    How take a excel report in sap b1 2007?what is the procedure or else step for excel report?how to import the report in excel sheet
    regards
    Bhuvana

    Hi Bhuvana,
    You can create reports in Excel for Business One using XL Reporter. This is an add-on which allows you to build custom reports, and comes included with the 2007 A version. It is also available as a download for the 2005 version.
    Please see [service.sap.com/smb/sbo/xlr|http://service.sap.com/smb/sbo/xlr] which is the landing page for XLR. This contains alot of information including examples, the help file, e-learning and other documentation.
    If you have any specific questions about XLR, it would be best to post them in the Business One forum rather than the SDK forum as SDK consultants may not have as much experience with XLR.
    Regards
    Niall
    SAP Business One Forums Team

  • Reports in SAP CRM 2007

    Hello,
    We have installed SAP CRM 2007 and are able to create Accounts, Contacts & Opportunities etc from the web browser.
    However, we are unable to execute any reports from the browser and are getting following error:
    Error loading template 0TPLB_0CSALMC02_Q010_1
    Any ideas / suggestions / pointers to resolve this will be highly appreciated.
    Regards,
    Chander

    Hello All,
    The solution for the BI Reports in CRM 2007 has been found. The solution is as follows
    You must assign the default SAP Netweaver BI system (RFC connection) to the logical system CRMBWDEST in transaction BD97. Need to have Graphical server installed also in the BI.
    Award points if helpful
    Mohid Uddin

  • Type Of Connection For Crystal Report in SAP B1 2007 A

    Dear All,
                I want to make Crystal Report for a module?What connection must be used? I made User DSN and File DSN both but when I called that particular .rpt file from SAP B1 2007 A it shows the error "
                        Crystal Report Windows Forms Viewer
                        Failed to open the connection.
                                                                                    Failed to open the connection.
                        TestFileDSN_OITM {A3103093-3D56-4F37-95B4-AD9739E212A2}.rpt
    If possible please tell me the details how to used appropriat  connection on both client and server (if possible step by step).
    Thanks in advance
    Ghazanfar

    is your report running inside SAP b1 or directly from crystal report in system where you developed it
    In Client you need to install .net framework 3.5 and Crystal Run time to run reports.
    in the client make sure the shared directory is accessible from run without any password
    and in the add on go to report properties and set the path to the shared folder .rpt files and apply changes
    use OLE DB connection
    CRYSTAL REPORTS 2008 V1 FOR B1
    (click on Installation)
    https://websmp208.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=01200314690900002156&V=INST
    Crystal Reports Integration for SAP Business One
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/707f51b3-0b20-2b10-8daa-d8ee72ace309 [original link is broken]
    in case you have any problem installation go through the demo and make sure you have installed correctly
    https://websmp201.sap-ag.de/~sapidp/011000358700000727712008E.htm
    Thanks
    Krish

  • Crystal Report For SAP B1 2007 A - Files required

    Dear all,
    From where I can download the
    CRRuntime_12_mlb.msi   (CR 2008)
    SAPCrystalSetup   (CR 1.0.0.0 setup)
    files. I have used the following link but not able to download these files.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88#section10 [original link is broken]
    Can any one tell me how can I get these files so that I try CR 2008 for B1.
    One more thing can I use dotnet framework 2.0 with CR 2008 for SAP B1 2007 A ? 
    Regards,
    Ghazanfar Ahmed

    Ghazanfar Ahmed 
    try this link
    https://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/d0a0c14b-0e20-2b10-939b-e93a19f14c12
    https://www.sdn.sap.com/irj/scn/businessone-tools
    install .net framework 3.5
    for 64 BIT version use following link
    https://sapmats-de.sap-ag.de/download/download.cgi?id=0G5XHIZJQPZGO012YOH7W95H7M7SA4UOHHZZ28HQZGMOO5OH8R
    Regards
    Krish
    Edited by:  on Apr 2009 10:38 AM

  • Dunning Letter on Receivables Aging SAP B1 2007

    You run the customer receivables aging report and double click a row on receivables aging report window. You highlight one row, there is no letter checkbox compare to SAP 2005 A. There is no Dunning Letter PLD as well. Therefore dunning letter report cannot be previewed.
    Does this letter checkbox and dunning letter PLD is not available in SAP 2007 A?
    Thanks,
    Kay Chong

    Hi,
    the document [Changed Features as of Release 2007 |https://websmp101.sap-ag.de/~sapidb/011000358700000281062007E.pdf]says the following:
    Dunning in Aging Report
    Application Path: Financials u2192 Financial Reports u2192 Accounting u2192 Aging u2192 Customer Receivables Aging u2192 Customer Receivables Aging u2013 Details window
    Availability: All countries
    Used for: indicating the dunning level linked to the document/transaction and creating a dunning letter if required.
                             Availability in
                             SAP B1 2007 A or B    Functionality changed?
    New installations        N/A                   No
    Upgrading customers      All countries         No
    So this functionality is only available for databases upgraded from an older release.
    Regards,
    Marcus

  • Integrate BO report in CRM 2007

    Good morning all,
    my query is to integrate a customer oriented report from Business Objects in SAP CRM 2007 Web Client.
    Is there a way, to display this report in customer's factsheet in a similar way BI reports can?
    Thank you for your help,
    Chrysanthi

    Hi,
    then you can use an application called "OpenDocument". Each document on your BusinessObjects Enterprise system can be called with OpenDocument. If you go to help.sap.com in the BusinessObjects area and look for BusinessObjects Enterprise as product you will find more details
    ingo

  • Sap CRM 2007 Security related issue

    Hi All,
    I am working on SAP CRM 2007 security.
    I have scenario, which we are trying to fix.
    There are two users A and B.
    A is assigned to role X
    B is assigned to role y
    Business Partner 123 is created for user A
    Business Partner 456 is created for user B
    These Business Partners are assigned to Authorization Groups.
    See below:
    1)Authorization Group (LK01) is assigned to Business Partner --123.
    2) Authorization Group (LK02) is assigned to Business Partner --456
    3) Authorization groups LK01 is assigin to user A in PFCG role X
    4) Authorization groups LK02 is assigin to user B in PFCG role Y
    a) User A assigned with PFCG role X>Authorization Group (LK01)>BP 123.
    b) User B assigned with PFCG role Y>Authorization Group (LK02)>BP 456.
    Note:
    1) Authorization Groups are assigned to BPs under the Control tab.
    2) These Auth Groups are assigned in Authorization Object in PFCG role.
    Now, USER 'A' should not be able to work under the BP 456 as this BP is assigned to authorization group LK02.
    The issue is when we open the WEB UI and login with user A role X, He can search for the BP 456 assigned to Auth Group LK02.
    User A can open the Interaction History and edit the Service Order created using the BP 456.
    He can Edit the following in Service Order details:
    1) General Data Status (from created to complete), Contact person, Sale Rep name.
    2) Organization Data like Sales Office, Sales Org Unit, Distribution Channel
    3) Business Partner.
    However, one good thing is he cannot edit the Account details like Account ID, House No, Employee Resposible, the message he get is "No authorization to change partner with authorization group"  which is a
    good thing.
    I have tried to be precise, please let me know if you require more information.
    Regards,
    Dave.

    I suggest the following:
    Please, check whether the system works if you activate the implementation BUPA_F4_AUGRP.
    In addition check the notes 559662, 674869 and 782927. Maybe the notes are already implemented but you can try then the implementation of the BADI (SE19). It should resolve your issue.
    I have implemented this Badi solution before, and after activation; the search help ; nor search result list did NOT show any Business partners anymore that had an authorization group I was not allowed to see.
    kind regards
    Davy Pelssers
    SAP CRM/Security consultant

  • How to write a SQL query in SAP B1 2007 B with input parameters?

    How to write a SQL query in SAP B1 2007 B with input parameters, on execution of which will ask for some input value from the user and the values will be selected from a list such as item list?

    The syntax like
    SELECT * FROM OITM T0 WHERE T0.ItemCode = '[%0\]'
    Thanks,
    Gordon

  • Subtotals in ALV Report

    Hello,
      I am developing a report using ALV FM, i have field catalog(vbeln posnr matnr netpr). i know how to set subtotals using layout settings once after program execution.but i want subtotals to set before execution( i mean that, in coding itself). does any one worked on this before..?if so. plz send some sample code..
    thanks in advance..
    leoiz.

    Hai Komal Rani ,
    As u said that i worked on subtotals in my report but that doesn't give any result to me.As we know that before going to work on subtots we must sum at least one column,then only we can do subtots, similarly i did using do_sum attribute in fieldcatalog table on netprice column.
    then i passed
       s_sort_info-fieldname = 'VBELN'.
       s_sort_info-subtot = 'X'.
       append s_sort_info to t_sort_info.
    then i passed t_sort_info to
        IT_SORT                           = t_sort_info in
    REUSE_ALV_GRID_DISPLAY fm.
    but that doesn't give any result...
    if i did mistake, can u explain once again..?
    leoiz.

  • Bounce Management in SAP CRM 2007

    Hi Experts,
    we have SAP CRM 2007 and I have a few questions about Bounce Management.
    It is a very simple scenario, so it´s fine if only hard bounces for incoming EMails are handled.
    1) Do you need ERMS for that simple form of Bounce Mgt?
    2) Is the Usage of Inetraction Center required? (We do not want to)
    3) Is it possible/recommended to create Activities out of incoming bounces?
    4) Can you segment on Bounces, not only within the Campaign Automation?
    5) What ist the effort/set up to use Bounce Mgt in that simple scenario about?
    Thanks a lot
    Florian

    Yes, I was mentioning SAP Note 897730. The major pre-requisite mentioned there is Event linkage settings through SWETYPV transaction and in your case you just need to do the Rule Modeler settings. If you are using DEFAULT policy you do not need to do anything in Service Manager Profile.
    The note pre-requisites mentioned are
    The required services and service manager profiles for using the E-Mail Response Management System (ERMS) are defined: All entries necessary for bounce management are delivered in the default Customizing. As I mentioned before Service Manager Profile: Bounce is already defined and you are going to use that profile. The required service in your case would be "Bounce Data Update" or one of the 5 standard service mentioned in this note. These are already defined and taken care of in standard configurations. Therefore, you do not need to do anything over there.
    Please do the above two settings and if you have any issues please come back to me. I am sure you won't have any issues with the requirements that you mentioned. I just took one hour to set up hard bounce scenario. Only if you are planning to use services that are not standard it becomes slightly tricky. In our case major issue was that there was an error in the standard workflow. I did not know much about Workflow bindings etc. before, but then I had to dig deep into this and it gave me an opportunity to learn workflows. This was the good thing that came out of all this.
    Regards,
    Deepak
    Please note you will have to do the Event Linkage settings in SWETYPV transaction.
    Edited by: Deepak Ahuja on Jun 5, 2008 9:15 AM

  • Problem while changing decimal places in SAP B1 2007

    Hi Experts,
    I want change the decimal places of Quantity type fields from 2 decimal places to 4 decimal places. But while changing it in Genral settings form ,it shows the error message "Cannot update while another user is connected to the company". it is working in SAP B1 2005B but not in SAP B1 2007
    Please help me if you have any solution on this issue..
    Thanking you in advance

    Paul,
    Please see SAP Note 1247060 as is discusses the fact that this did work in 2005, but the behavior was changed in version 2007 ...
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&;note_numm=0001247060
    Eddy

  • Error while installing SAP NetWeaver 2007

    Dear All,
       I got an exception while installing SAP NetWeaver 2007
    on Windows 2003 Enterprise Edition (service pack 1). This exception occured when installer tried to install MaxDB database. When I saw installation log file, I found following msgs. Pls suggest me appropriate solution so that I could install SAP NetWeaver 2007 on my m/c.
        I am giving log details bellow.
    Thanks,
    Regards,
    Rajendra Pote.
    Log file details:
    (Aug 3, 2006 1:54:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file C:\sapdb\JP1\log.txt for details.
    (Aug 3, 2006 1:54:12 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="Thu Aug 03 13:54:11 GMT+05:30 2006 An Error happened during the Change of the MaxDB Database passwords. Check end of Logfile C:/DOCUME1/ADMINI1.SER/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="Thu Aug 03 13:54:11 GMT+05:30 2006 An Error happened during the Change of the MaxDB Database passwords. Check end of Logfile C:/DOCUME1/ADMINI1.SER/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:260)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    MaxDBSAPNWPREV.log file details
    Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Checking x_server
    Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB program: c:/sapdb/programs/bin/x_server.exe
    Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Found c:/sapdb/programs/bin/x_server.exe
    Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Calling: "c:/sapdb/programs/bin/x_server.exe" start
    MaxDB: 18641 ERROR: XSERVER is already running!
    Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: rc of x_server call = 32
    Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: dropping database instance: JP1
    Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Try to establish connection to JP1
    Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: command failed: <DBMException -24950 ERR_USRFAIL User authorization failed>
    Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: rc of Method: 0
    Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: sdbuninst
    Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB program: c:/sapdb/programs/bin/sdbuninst.exe
    Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Calling: "c:/sapdb/programs/bin/sdbuninst.exe" -all
    MaxDB sdbuninst:
    MaxDB sdbuninst: uninstall following package(s):
    MaxDB sdbuninst:
    MaxDB sdbuninst: Database Kernel   c:/sapdb/jp1/db        7.6.00.23   32 bit
    MaxDB sdbuninst: Server Utilities  c:/sapdb/programs      7.6.00.23   32 bit
    MaxDB sdbuninst: Webtools          c:/sapdb/programs/web  7.6.00.23   32 bit
    MaxDB sdbuninst: ODBC              c:/sapdb/programs      7.6.00.23   32 bit
    MaxDB sdbuninst: JDBC              c:/sapdb/programs      7.6.00.24        
    MaxDB sdbuninst: Messages          c:/sapdb/programs      MSG 0.3215       
    MaxDB sdbuninst: Base              c:/sapdb/programs      7.6.00.23   32 bit
    MaxDB sdbuninst:
    MaxDB sdbuninst:
    MaxDB sdbuninst: found instance JP1
    MaxDB sdbuninst: cannot remove package "Database Kernel": first you have to remove all instances
    MaxDB sdbuninst: fatal error at Th, Aug 03, 2006 at 13:54:27
    Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB Error during call to sdbuninst, rc= 1
    Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB: Done with call_sdbuninst
    Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB: rc of Method: 1
    Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB: End of CallSdbuninst
    Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB: End of uninstallation
    MaxDb_SAPNW.log
    Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: Start SoftwareCheck
    Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: IndepProgPath:
    Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: IndepDataPath:
    Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: Software doesn't exist, Variable MAXDB_SOFTW_EXISTS set to NO
    Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: end of Check Section!

    Hi,
    the following parts of the log should give you some hints about what might be wrong:
    "dropping database instance: JP1"
    "found instance JP1 "
    "cannot remove package "Database Kernel": first you have to remove all instances"
    It seems you still have a MaxDB instance named JP1 on your system. This instance could not be dropped, because it was not possible for the uninstaller to connect to the db instance:
    "dropping database instance: JP1"
    "Try to establish connection to JP1"
    "command failed: <DBMException -24950 ERR_USRFAIL User authorization failed>"
    So, if enough parts of the software are still available and you know how to connect to the JP1 instance (using either the Database Manager GUI or DBMCLI), you can drop the instance and proceed with the installation.
    Regards,
    Roland

  • Error Message when we create a Service Ticket in SAP CRM 2007

    Hi All we are having a serious production issue when we create a S.Ticket in SAP CRM 2007 We get the following error message we are not trying to send any information to R/3 We have a planned go live this saturday. So any help would be greatly appreciated.
    An error occurred in system EDIES during account assignment
    Message no. CRM_ORDER_MISC 060
    Diagnosis
    Errors occurred when assigning an account assignment object to a business transaction. To view the error message, see the accompanying log file.
    Transfer Log
    No controlling type could be determined (Notification E IAOM 012)
    No controlling type could be determined (Notification E IAOM 012)
    Regards
    Sathya

    Hi,
    I have looked into your issue.
    For this service ticket, kindly check the Org Unit maintained in Transaction and table OFIC_BILLORG_SRV are same. If not same kindly make changes in the following path in SPRO.
    ==> SAP Implementation Guide
    ==> Customer Relationship Management
    ==> Organizational Management
    ==> Cross-System Assignment of Organizational Units
    ==> Assign Billing Units to Service/Sales Organizations
    If the above information is not helpful kindly take a look at note 861116.
    I hope this helps.
    Regards,
    Venkat

  • Warning message when exporting a Financial Report to Excel 2007

    Excel 2007 users that attempt to export a fully formatted Financial Report into Excel 2007 get the following error message:
    "The file you are trying to open, 'FileName.xls', is in a different format than specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now?"
    I am still researching the behavior that users get when they click through the message, but would ideally like for the message not to appear without updating the client machine registries. Has anybody else run across this?
    Excel 2007
    BI Plus version: 9.3.1.0.0.248

    It looks like this is a known issue addressed in Bug 7359171 - EXPORT TO EXCEL 2007 CAUSES FILE FORMAT WARNING:
    The current design does not allow you to open HTML content from a web site in Excel unless the extension of the URL is .HTM/.HTML/.MHT/.MHTML. So ASP pages that return HTML and set the MIME type to something like XLS to try to force the HTML to open in Excel instead of the web browser (as expected) will always get the security alert since the content does not match the MIME type. If you use an HTML MIME type, then the web browser will open the content instead of Excel. So there is no good workaround for this case because of the lack of a special MIME type for HTML/MHTML that is Excel specific. You can add your own MIME type if you control both the web server and the client desktops that need access to it but, otherwise the best option is to use a different file format or alert your users of the warning and tell them to select Yes to the dialog.
    Another Workaround :
    Client Configuration of Extension Hardening.
    Client desktops can change the default behavior of the security check using a registry key. The following registry key can be set to alter the behavior ofthe Excel 2007 client in the following ways:
    Key: HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Excel\SecurityValue: (DWORD)"ExtensionHardening" = [0 = Disable check; 1 = Enable check and prompt; 2 = Enable check, no prompt deny open]Default setting if value not present is 1 (enable and prompt).
    The client can configure the site to disable the check by setting ExtensionHardening = 0. This will stop the prompt from appearing, but it will also disable any future checks for the file content validity. This does not (in itself) lower your security. The check is part of a defense-in-depth strategy to prevent malicious users from crafting files of a different type than its extension (or MIME type), which could then be used to trick users into opening a file of a type they did not expect. This warning is designed to let the user know of this potential threat and given them an option of canceling the open if they wish.

Maybe you are looking for