Suddenly cannot open webpage file ending IDX

I am very new to Apple. I have a MacBook Pro. There is a wesite I use ften and I have never had problems with it. Suddenly I get halfway through it and nothing happens when I submit. Nothing at all. As if I never pressed submit at all. Now this site works thoroughly on any other internet I use as in my phone or my husbands phone. So the problem only exists (to me) on my macbook. I have searched the internet trying to find some answers but have only found problems with windows. I have done everything I know of to try and fix this but I am getting no where. Can anyone help me or point me in the right direction?
Thanks so much,
Kitten916

I really hate to be a pain, but this has me stumped.
I tried to go to the preferences as you suggested but the same thing happens there. PS just freezes up and cannot be used at all. Even the red X at the top right of the screeen does nothing. I have to use Task Manager in order to quit the program.
I have removed PS from my machine VIA the Windows utility and reinstalled it several times with no improvement. I say that, but at one point I was able to open an image but when I tried to add another the system did the freeze up thing as above.
At some point I began to get sort of an error message during the PS bootup telling me that the PS interface font could not be loaded and that I should reboot my machine. I did that but there has been no change.
Frankly I cannot afford to buy time from Adobe to fix this so I am relying on you and the other folks on the board to hold my hand through this.
I thank you for your time and expertise.
Ralph

Similar Messages

SSIS package "The Microsoft Jet database engine cannot open the file"

Dear all,
I am trying to import data from an excel spreadsheet which is save on application sharing server. When I try to save same file locally (On my desktop) my package has no problem to read it. Problem comes when I change the file path to the share location
I am getting below error message,
"Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 13:26:46 Error: 2014-12-05 13:26:50.30 Code: 0xC0202009 Source: Incremental MasterStyle DL
Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database
Engine" Hresult: 0x80004005 Description: "The Microsoft Jet database engine cannot open the file ''. It is already opened exclusively by another user, or you need permission to view its data.". End Error Error:
2014-12-05 13:26:50.30 Code: 0xC020801C Source: Data Flow Task 1 Excel Source [36] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection
manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-12-05 13:26:50.30
Code: 0xC0047017 Source: Data Flow Task 1 SSIS.Pipeline Description: Excel Source failed validation and returned error code 0xC020801C. End Error Error: 2014-12-05 13:26:50.30 Code: 0xC004700C
Source: Data Flow Task 1 SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-12-05 13:26:50.30 Code: 0xC0024107 Source: Data Flow Task 1
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 13:26:46 Finished: 13:26:50 Elapsed: 3.401 seconds. The package execution
failed. The step failed."
I am trying to run this package as an sql server agent job and server is installed on my Machine. I have created proxy account with my own credential to execute it. I have full excess to the spread sheet and can open it in an excel program. Please
suggest what could be the reason why sql job is not able to access this spreadsheet. I can think of below reasons
File is password protected and I am not using its password to unlock it?
My domain account is a part of It Admin group with high previllages
when I installed my SQL server I installed it as a standalone instance of SQL server?
please advise.
regards
JKH

Hi Jahangir,
Based on the error message that "The Microsoft Jet database engine cannot open the file ''. It is already opened exclusively by another user, or you need permission to view its data.", there are two causes:
The account that SQL Agent is using does not have the correct permissions for the file or for the folder that contains the file.
Another process or user has the file open.
The following resolutions correspond to the previous list of causes:
Since you use a network path to the file (UNC), check the account permissions on the share, the file, and the folder.
The "another user" may be Microsoft Visual InterDev. Close any Visual InterDev projects that contain a data connection to the file. Please close all instances of excel file and re-run the package.
Besides, we can use a tool like
SQL Server Profiler to see what is happening when you run the package.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Help - "Acrobat is being used by another application and cannot open PDF files until the other application is closed."

Hello,
I searched this site and google for this error terminology and come up dry. I support a user who has been for years using Acrobat 5 (yes, I know...) to read files in a client DB program, as well as other PDF files on their PC. In the last week or so, they have started gatting this error "Acrobat is being used by another application and cannot open PDF files until the other application is closed." any time they attempt to open a PDF file attached to an email (via Outlook).
It is my understanding that they cannot upgrade to a newer version of Acrobat because of limitations of their client software, but had not previously had any issues viewing PDF notes from the DB, and PDF attachments in their email.
I have tried uninstalling and re-installing, as well as tried using Adobe Reader 7 & 9 in conjunction with Acrobat to try to get around this issue, but have not been successful.
Any ideas?
Thanks,
Jesse

I don't have an answer to your technical problem. The product I assume is Acrobat that you are talking about (based on the post title), Adobe is the company name. This is a good place to ask questions on Acrobat if folks can figure out what you are talking about. They will ask for the product version number (like AA9.3.3), operating system, and other applications if appropriate. Also, just what you are doing that generates the message.
As for Adobe, you are not likely to get an answer from them here in the user forum. You will be lucky if you can get an answer if you can contact them and not be on hold for more than an hour (sorry, this is why a lot of folks end up in the forum).
So, to help others try to answer your question, what are the products and versions involved? What OS? What are you doing when the message comes up.

Cannot open .wmf files in CS 5.5 InDesign

I Receved the following message; Cannot open the file logo.wmf. Adobe InDesign may not support the file format a plug-in that supports the file format may be missing or the file may be open in another application; which it is not. I am lookinig for a solution; so I can do my online InDesign class.

You should not use a WMF file anyway in InDesign, try to get a PDF, AI or EPS version, then place this file. WMF is supposed for office printer to use in Word or other Office programs, not for high end print production or PDF creation at all.
If you get a PDF version, don't ise any which was converted from the WMF file!

Error:Cannot open the file c:\windows\sapmmc.msc

Hi Folks,
I have been using SAP IDES ECC 6.2 for a while and now all of a sudden encountered a problem CANNOT OPEN THE FILE C:\WINDOWS\SAPMMC.MSC.
I am a technical consultant and i know nothing about basis and sap installations.
Is this error so fatal? How can i fix the problem..
Thanks in advance.
Ranjith kumar.

Hi
Ranjith
Hi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Regards
Bhaskar

How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file for

How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing , or the file may be open in another application?

Shouldn't the CC version be able to open any file created in an older version on InDesign?
Yes, it ought to.
If the older file wasn't yours (if someone emailed it to you,or burned it on a disc, or whatever), then I am almost willing to bet you a beverage in the city of your choice that it's not a complete InDesign file. That is, maybe it was zipped and renamed, or the beginning or end of the file was chopped off during download, or something like that. The only reason I'm not actually making the bet is that there is a remote chance that I'd lose, and maybe you're in Adelaide or Khabarovsk or somewhere where the cost of airfare to me would make that bet a very expensive bet for me to to lose. So no latte for you if I'm wrong!
The script that Jongware posted will tell you what version of InDesign made the file to begin with. Additionally, if someone did something like rename YourFile.PDF to YourFIle.INDD, it'll report that it's Not An InDesign File. Because while SpectrumPCS is kinda right and that message can be generated when attempting to open a CS5 file in CS3 or whatever, it also spits out the same message when you just try to open an Autocad file, or a Windows system file, or a PDF, or any file that InDesign actually cannot open at all.

Firefox setup 9.0.1 exe won't extract (cannot open output file)

I downloaded firefox 9.0.1 and it won't extract and install on a win7 computer. It says cannot open output file. I had previous versions of firefox for 10 years. I tried disabling AV and firewall also. Please help. Nate

Thank you! My solution was slightly different, but in the end, seeing what was going on in the Help menu in the browser did the trick. Turned out I had been stuck for who knows how long "downloading" a version 3! Also had a toolbar to disable but not the Ask.

A client has sent me an indesign file I cannot open. She says she has updated to Indesign CC 2014. I am a CC member and fully updated my own software but cannot open the file she has sent me, not even if she saves as an IDML, how do I resolve the problem?

A client has sent me an indesign file I cannot open. She says she has updated to Indesign CC 2014. I am a CC member and fully updated my own software but cannot open the file she has sent me, not even if she saves as an IDML, how do I resolve the problem?

There are a few things to try.
First, if this file came to you vial email attachment, it could have been corrupted. Ask her to zip the file and send it again. That sometimes helps.
I suppose there's a chance that the file is already zipped, so see if that's the case and unzip it if so.
If the file name doesn't end with .indd, add it and see if that helps.
If you are double-clicking, try File>Open from within InDesign.
Last (and I know this sounds like a joke, but I've seen it many times), sometimes people attach a Mac Alias or Windows Shortcut instead of the actual file. What is the file size? If it's really small, that might be the reason.
Also, no offense intended if some of this sounds like stuff you have already tried. I don't know what you know, so I'm just spit-balling.

Cannot open PDF files - generated response says I have to accept Licence Agreement. How?

Cannot open PDF files. Message generated says "Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User Licence Agreement, then Quit and relaunch the browser." Surely I must have accepted the Licence Agreement at the time of installation and am unable to "launch" Adobe reader. Anyone else had this issue please?

For Chrome I went went into the plugins: chrome://plugins/
The "Chrome PDF Viewer" was disabled. I reenabled it and it allowed me to view the PDFs again.

Am useing a PC. Have Photoshop CS5, suddenly cannot move Raw files from bridge (or anywhere else) into photoshop. Jpeg move into photoshop ok, did get error message 1 what do I do to correct this om bridge (or anywhere else for that matter)

Useing a PC
Have Photoshop CS5
Suddenly cannot move Raw Files from Bridge (or anywhere else) into photoshop.
I Can move Jpegs into ps the only issue is with Raw files
I did get error1 message but as do not know what that means its no help
any suggestions?

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Re: fatal error LNK1181: cannot open input file"OLDNAMES.LIB

Hi,
May be it is because it appears twice on your script :
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
At 18:40 18/12/98 +0100, Hervé Depoorter wrote:
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
>
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are asfollows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
>
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled
partition)
>
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tpstruct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
[email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

ex_rep_chan is dependent on the db library, which judging by your printout, has not finished building. Which is odd, since Visual Studio is usually smarter about dependencies. Just rebuild ex_rep_chan and you should be fine.
Lauren Foutz

Fatal error LNK1181: cannot open input file"OLDNAMES.LIB-Reply

The OLDNAMES.LIB file should be in your Visual C++ library directory (eg c:\Program Files\DevStudio\VC\lib). If you reread TechNote 11431it explains how to set up your LIB environment variable so that the linker can find the appropriate files.
Regards
Mark Carruthers
20th Century Fox
Hervé Depoorter <[email protected]> 12/18/98 09:40am >>>
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are as follows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled partition)
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tp struct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

ex_rep_chan is dependent on the db library, which judging by your printout, has not finished building. Which is odd, since Visual Studio is usually smarter about dependencies. Just rebuild ex_rep_chan and you should be fine.
Lauren Foutz

Fatal error LNK1181: cannot open input file"OLDNAMES.LIB

Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are as follows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled partition)
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tp struct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hussein,
Please find below the requested information,
1. Path variable value after sourcing the apps env file,
D:\oracle\VIS\apps\apps_st\appl>APPSVIS_oracletemp.cmd
ECHO is off.
ECHO is off.
Tue 11/23/2010 02:36 PM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual Studio 2008 x86 tools.
APPSORA.cmd exiting with status 0
D:\oracle\VIS\apps\apps_st\appl>
D:\oracle\VIS\apps\apps_st\appl>echo %path%
C:\VS2008\Common7\IDE;C:\VS2008\VC\BIN;C:\VS2008\Common7\Tools;C:\Windows\Micros
oft.NET\Framework\v3.5;C:\Windows\Microsoft.NET\Framework\v2.0.50727;C:\VS2008\V
C\VCPackages;C:\Program Files\\Microsoft SDKs\Windows\v6.0A\bin;D:\oracle\VIS\ap
ps\apps_st\appl\au\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\fnd\12.0.0\bin;D:\
oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\app
sutil\jdk\jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-m
ulti-thread\;D:\oracle\VIS\apps\apps_st\comn\util\unzip\unzip;D:\oracle\VIS\apps
\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle
\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\apps
util\jdk\jre\bin;C:\cygwin\bin;C:\Windows;C:\Windows\system32;D:\oracle\VIS\apps
\tech_st\10.1.3\ant\bin
D:\oracle\VIS\apps\apps_st\appl>
2. gnumake version is as follows,
D:\oracle\VIS\apps\apps_st\appl>gnumake --version
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for i386-pc-mingw32
D:\oracle\VIS\apps\apps_st\appl>
Thanks,
Rajesh.

Cannot Open this file: Z1SQLiteFillRow failed

I'm trying to sync Outlook 2007 Calendar with Ipad and my Samsung S3 Cell. I've downloaded and activated ICloud on all devices and PC. My Calendar Items are disappearing in my main Calendar Folder in Outlook after a short time unless my ICloud and or my ICloud Local Calendars are checked in the Navigation Box. I try to open the Calendar Item in my original Calendar in Outlook to edit or see the event. After double clicking to open the event, I get the following message:
Cannot Open this file: Z1SQLiteFillRow failed Also, sometimes in one of the calendars, when I want to open a new event in the Calendar it won't let me open a new event, says I don't have permission, see your administrator. Lastly, when I go to Organize in Outlook, it's not opening events that I want sorted etc. Can anyone give me any thoughts on these issues. I'm about ready to disconnect ICloud completely but I'm afraid I'm going to loose several months worth of Calendar Events.
Thanks,
grthompson2

Thanks Bob, but sorry i might not explain myself very well. The original file is CS4 and indeed it did open just fine in CS5 until yesterday. Today, all of the sudden i got this message. I am not trying to open a CS5 into CS4...is the other way around and it worked before.

Cannot open JPEG files in PE9

Cannot open JPEG files in PE9 "because an unknown or invalid JPEG marker type is found"

it wants
to default into a JPEG file and there is a JPEG marker on the end of the
saved file even when I select Photoshop format.
I would really like to see a screenshot of the save as window, since any time you have a layered file PSE fights you every step of the way and makes you save as a copy when you choose jpeg as the format.

Suddenly cannot open webpage file ending IDX

Similar Messages

Maybe you are looking for