Suddenly HP v195b 8gig does't get detected on different computers.

Hi,
Today my HP v195b usb stick didn't get detected anymore.
I tried several things suggested here on the supportdesk, but nothing seems to work.
I can see that something IS detected, it shows Removalble Drive (F: ) if I look on This PC.
But when I open it it says: Please insert disk or other medium in Removable Drive(F: )
I have a Lenovo Z50-75 with Windows 8.1
What can I do to make it work again?
Kind regards,
Arthur

@ArtRam
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

Iphone does not get detected in windows 7

Hi,
Whenever I connect my iPhone to my lap, it does not gets detected.
It enters into charging mode.
But it gets detected in iTunes.
How to make it detected outside iTunes ?

hi..
i also have a same problem..
i am using windows7
and none of my iphone gets detected..!!
i have a iphone5 and 4s
i also tried formatting my pc but em nt getting a solution for this..i tried all of the solutions listed in the thread..
plzz help

IPhone 4S does not get detected in Windows 7

iPhone 4S does not get detected in Windows 7
When I connect my iPhone 4S to my computer, iTunes does not detect it. iPhone pops the message of USB connectivity and defaults to Mass Storage. Windows shows the message that "Device is ready to use" and I can read both drives of the iPhone in Windows Explorer. However iTunes does not detect the device and the "Devices" tab does not appear. I have tried Restarting the phone. Restarting the computer. Connecting the phone to a different computer. (I'm on version 4.3.3 (8J2), firmware 01.59.00 and iTunes 10.5.3.3).

First make sure you usb drivers are up to date
http://windows.microsoft.com/en-CA/windows-vista/Tips-for-solving-problems-with- USB-devices
Try a hard reset on your iPhone, press the power/sleep & home button at the same time until the apple logo appears (ignore the slide to turn off prompt). Once the apple logo appears release the buttons and wait for your iPhone to boot back up then try connecting. Also try a different USB cable if you have one available.

HT1296 What is to be done if your device does'nt get detected by your computer? Itunes doesnt show my device.

My device is not being detected by my computer. Itunes doenot detect my device. What should I do about it?

Hey MenonPreetha,
We have articles that can help you troubleshoot the device not appearing in iTunes, but it depends what operating system you're using - OS X or Windows. Below are both articles:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
To begin troubleshooting this issue on your iOS device, first follow the steps in the appropriate troubleshooting assistant below:
iPhone Troubleshooting Assistant
If the issue persists after following the troubleshooting assistant, continue with the in-depth steps in the appropriate article, testing to see if the issue is resolved after each section.
Hope that helps,
David

IPad (2) Recovery Mode, not getting detected by ITunes on the PC

While upgrading my IPad (2) to IOS5, it has gone into Recovery Mode. NOt it does not get detected by ITunes on the PC - doesn't appear on the sidebar. I've completely uninstalled all itunes and other Apple components and reinstalled Itunes on PC - no change. IPad is still in starting screen mode and not detected by PC. Please help.

See if this page helps : http://support.apple.com/kb/HT4097

PLEASE HELP!!! Nano doesnt get detected by Itunes

hi i have a problem with my ipod nano, though its get detected by the computer and shows the ipod icon on MY COMPUTER, it does not get detected by itunes and shows NO icon on Itunes to update ipod.. therefore i cannot upload any songs can someone please HELP!!!!! i have been trying it for five days nothign is happening

I have had the same problems as this string of users have had and searched just about every like user problem listed. Finaly something worked. Take a look at this link http://discussions.apple.com/thread.jspa?threadID=289664&tstart=15 My hard drive is F: and my USB was C: I changed the USB drive to H: and reset my nano - IT WORKED! iTunes recognized the iPOD and I finaly get to us my new toy. Good Luck

I have two ipod nanos. And i have 2 itunes accounts and we are accessing both accounts from the same PC. One of my ipod works fine, it gets detected as a device and sync fine. The other one does not. Need help.

I have two ipod nanos. And i have 2 itunes accounts and we are accessing both accounts from the same PC. One of my ipod works fine, it gets detected as a device and sync fine. The other one does not. Anyone knows what this may be?

The music sync is one way - computer to ipod. The only exception is ituens purchases. The ipod is not a backup device.
Copy everything from the old computer or your backup copy of your old computer, to the new one.

After installing win 8.1 and the latest itunes version iTunes does no longer detect my iPhone.

After installing win 8.1 and the latest itunes version iTunes does no longer detect my iPhone. On my iPhone I now suddenly get the question: Do you trust this computer (after connecting to the usb port)

Try this!
I had the same problem as you an it worked for me.
http://support.apple.com/kb/HT1923

Audigy 4 Pro - I/O Hub does not get any po

Hello all,
I purchased an Audigy 4 Pro a few days ago and I cannot get the external hub to power on.
This somewhat sumarizes what I tried so far:
. Uninstalled all drivers and software of my old Soundblaster Li've 5. Platinum
2. Also removed all entries of the old soundcard from Device Manager
3. Powered down the PC fully, took out the Li've 5. and powered it back on and logged on to my Windows XP (SP2).
4. Just to be sure before installing the drivers for the Audigy 4 Pro I cleaned out the cookies, temporary internet files, all other Temp folders, the Prefetch folder and also ran a program to clean the registry.
5. De-activated my Norton AntiVirus Corporate Edition's Real-time protection, it's services and also my ZoneAlarm Pro from starting up the next time I reboot Windows.
6. Powered down the PC again, took the power cable out, made sure there was no power whatsoever left and carefull inserted the Audigy 4 Pro card in an empty PCI slot.
7. Connected the larger AD_Link to the card, then to the hub
8. Connected the smaller AD_Link to the card, then to the hub
9. Finally connected the power convertor cable to a free systems power unit
0. Double-checked the entire hardware setup a few times and power the PC back on
. Windows XP detected and installed the OHCI Compliant IEEE 394 Host Controller and the 394 Net Adapter
2. Canceled to proceed looking for a driver when it found the Audigy 4 Pro card
3. Installed the drivers and applications that came with the Audigy 4 Pro. Everything went smooth - no error messages during the installation.
4. Rebooted PC after prompting to do so.
5. With ZoneAlarm and my Norton Antivirus de-activated, all drivers and programs installed properly the external I/O hub does NOT get any power. I also made sure to check this with the remote control.
I have ofcourse no sound coming out that hub when plugging in my headphone and also cannot use my microphone.
6. I ran the Diagnostics program that was installed automatically with the other Creative applications: It claims there aren't any problems.
7. Powered down the PC again, checked all connectors, powered the PC up again: Same problem... no power.
8. Installed the latest 4-in- drivers found on viaarena.com: Same problem
9. Uninstalled and reinstalled the drivers and applications: Same problem
20. Uninstalled and reinstalled the drivers and applications after taking out all other PCI cards and placing the Audigy 4 Pro card into an other PCI slot: Same problem
2. Set my BIOS to factory defaults: Same problem
22. Formatted the PC and reinstalled Windows XP (SP) with every update thinkable... Same problem
23. Formatted the PC AGAIN ( ! ) and reinstalled Windows (SP2) with updates .... Same problem
Another problem: Sent a detailed e-mail to Creative Support Europe.... Still NO respons after 48+ hours.
Anyone else should have a solution I would appreciate trying out, or if all fails I'll go for a Terratec model.
Thanks in advance!
PC Stats: Asus A7V266 - VIA KT266 Chipset (VT8366 North Bridge with VT8233 South Bridge) / BIOS version: 0 / AMD Athlon .4GHz / 52Mb
Message Edited by HilTek on 07-05-2005 :04 PM

Amazing, I got mine about 3 days ago and have been pulling my hair out trying to resolve the same problem. I have checked power connections, reinstalled drivers. I think something is wrong with the box. I tried to call support yesterday, which was a Saturday, but they aren't available til Monday. I guess I will call them Monday. Let me know if you find anything out in the mean time.
Thanks
John
AMD Athlon(tm) 64 FX-57 Processor
A8N-SLI Premium
NVIDIA GeForce 7800 GTX
GB RAM
WIN Pro x64

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

Isight not getting detected

I have a standalone isight and I use an IMAC G5.Its funny that my isight is not getting detected by my imac at all!! I have tried changing the firewire ports, but I just dont understand!! I hadnt been using for about a couple of months, I come back and try videochatting and it just doesnt work!!It says isight not connected!!
Can you suggest, what I need to do. I dont think I have the CD for isight either. I have had this isight for about 2 years now!

I had the same problem with my macBook. All of a sudden the green lites on my built in camera were not on and it did not recognize my isight camera...Couldn't get it to work till I plugged in an external isight camera....started working for a few weeks....then quite working again and read about reseting the prm on an intel based macbook....shut down everything, disconnected all power THEN pushed the power button for 5 seconds....repowered the computer and is came back on working.
Only problem, and the mac dealer told me this didn't matter but I'm not sure...I only get one green lite instead of two...
any thoughts on this...
Rick

SQL server instance not getting detected during SCOM 2012 R2 Installation

Hi All,
This is related to the below thread which i created. But i wanted to test this practically in a LAB equipment
https://social.technet.microsoft.com/Forums/en-US/96feece7-c168-4f42-b62e-4c0c20f8d525/does-scom-2012-2012-r2-setup-detect-a-sql-instance-of-a-sql-server-in-the-same-network-which-is-in?forum=operationsmanagerdeployment
So i want to install SCOM in my domain, But i want to use a SQL server in my network which is in another domain.
So i have 4 server machines as below:
SERVER_DC1 - Domain controller of 1st domain.
SERVER_DC2 - Domain controller of 2nd domain.
SERVER_SQL - SQL server 2012 Enterprise installed for SCOM but is in Domain 1
Server_SCOM - I want to install SCOM in this but which is in domain 2
I created a trust relation between 2 domains with a Forest trust 2 way transitive.
I have created a security group and added that as SQL Admin during the installation. Later i added one Domain administrator account from Domain 2 to this security group.
When i do a installation in SERVER_DC1 for testing the SQL instance is being detected as below.
When i do the installation in Server_SCOM which is in another domain then the instance is not getting detected.
I have turned off windows firewall in all the machines.
Before creating the trust i ran the setup in Server_SCOM then it was giving me a warning saying it is not able to access the SQL server due to permission issues.
After giving permissions my instance is not at all getting detected.
Can any one help plz.
Gautam.75801

Hi Yan Li,
Really a helpful post. I tested the connection. I connected to the SQL server in Domain A using a server in domain B logged in as a domain B user to whom the SQL permissions are provided. The result says It was successful.
Below is the screenshot.
I don't understand why is it not getting detected in the SCOM setup.
But 1 more important thing which i forgot to mention.
When i log on to the server in which i want to install SCOM in domain B, But by using Domain A's user account (Added as a local user in SCOM server in domain B), Then the Instance is getting detected.
Below is a screenshot of that.
So has any one faced such a type of issue ?
Gautam.75801

I have an iphone 4 with 4.3.2 version, want to upgrade but my phone is not getting detected on my comp on itunes. i want to upgrade it to the latest version of the software, please help

i have an iphone 4 with 4.3.2 version, want to upgrade but my phone is not getting detected on my comp on itunes. i want to upgrade it to the latest version of the software, please help

If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone

HT4623 i have iphone 4 with 4.3.2 version, i want to upgrade the software. but my phone is not getting synchronised on itunes and not getting detected. please help me

i have an iphone 4 with 4.3.2 version, i want to upgrade the software. but my phone is not getting synchronised on itunes and not getting detected. also there is no update software tab under settings.please help me

If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone

Where does Lion get its usernames? (former Linux user)

Just some minutes ago, I opened the lid of my Macbook and noticed that something was using the CPU for 50% continuously. When I opened Activity Monitor, the only two CPU-using processes were kernel_task and WindowsServer, but not enough to cover 50%.
Safari also wouldn't respond. Force-quitting worked, but starting it again would show the window but then result in a spinning beachball of death.
When I opened the terminal, the prompt said "I have no name!@macbook$ "
When I typed the command "id", it gave me a user ID (502) but no username!
After killing all apps and mucking about, the CPU suddenly went back to the normal 3-5% usage, and everything worked fine again.
Obviously, something went wrong with the process that does the user identification. As a former Linux user, I'd say the user data resides in /etc/passwd but that's not where it's at. Where does Lion get its usernames and passwords?

OK thanks for the DSCL tip. I've found another thread with the same symptoms:
https://discussions.apple.com/thread/3663559
The logs of the opendirectoryd process show that it restarted itself (from /var/log/opendirectoryd.log):
2012-04-15 13:26:56.346 CEST - Loaded bundle at path .....
The system logs show a couple of errors from coreservicesd:
Apr 15 13:03:32 macbook coreservicesd[31]: _scserver_ServerCheckin: client uid validation failure; getpwuid(502) == NULL
And then thousands of these two lines follow:
Apr 15 13:03:43 macbook xpchelper[95253]: getpwuid_r() failed for UID: 502, ret: 0, errno: 0
Apr 15 13:03:43 macbook com.apple.launchd[1] (com.apple.xpchelper.F6010000-0000-0000-0000-000000000000[95253]): Exited with code: 1
Let's see if it happens again in the future. I'm logging this for reference and Google.

Suddenly HP v195b 8gig does't get detected on different computers.

Similar Messages

Maybe you are looking for