Summary for all Profit Centers in the Profit Center Report

There should be a summary for all Profit Centers in Profit Center Report. Now there is only summary by Sort Code but should be also summary for all Sort Codes.

Alex is right if we are dealing with R/3 and thats not the way you look in BW.
normally org. levels are not used in BW. unless you created one using ORG_LEVEL_CREATE( normally nobody does that in BW or may be I never heard of it).and that is the reason we create RSR objects. so if you look in AGR_1252
with VARBL  $PRCTR you won't get anything.
$PRCTR might be your custom field I guess. Identify the RSR auth. objects which has this field. you already mentioned you did that and you have 6 auth. objects.
you might have made 0PROFIT_CTR as auth. relevant and created those 6 RSR auth.objects.
To get the list of roles where those RSR objects getting used and the profitcenter values in those roles, I would say goto AGR_1251, and in OBJECT field give your 6 RSR objects in the multiple selection tab which you can see on  the right side  of that field. you will get the list.
regards
Message was edited by:
        Keerti Vemulapalli
Message was edited by:
        Keerti Vemulapalli
Message was edited by:
        Keerti Vemulapalli

Similar Messages

  • Switch off the automatic update of profit centers on the Balance Sheet acco

    Dear all,
    In CO I am using only CCA and PCA. But I don't want to have the profit center updated on the balance sheet items.
    For example I have it activated for all the automatical BS postings from MM
    I need it only for the PL accounts.
    How can I switch off the automatic updates of profit centers on the Balance Sheet Account?
    Is it enough to deactivate the PCA on the Controlling Area?
    Thanks in advance.
    Stefka

    Hi, remove assignment in 3KEH,3KEI

  • I can not get my email to send through my iPad email. The email works for all other options. The error says I need to enter a password in setting, but I have entered the password numerous times to no avail. Any ideas?

    I can not get my email to send through my iPad email. The email works for all other options. The error says I need to enter a password in setting, but I have entered the password numerous times to no avail. Any ideas?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
     Cheers, Tom

  • Ok, so i bought a 16GB DDR3 1333MHz RAM for my late 2011 13" MacBook Pro whose memory runs at 1067 MHz (I was also told that late 2011 MBPs run at 1333MHz, is mine an exception?)... Im looking for all possibilities to close the compatibility gap...

    Ok, so i bought a 16GB DDR3 1333MHz RAM for my late 2011 13" MacBook Pro whose memory runs at 1067 MHz (I was also told that late 2011 MBPs run at 1333MHz, is mine an exception, if so, why?)... Im looking for all possibilities to close the compatibility gap because computer freezes at boot and was wondering if there was anything i could do to get this 16GB DDR3 1333MHz RAM to work at 1067MHz or somehow get my computer to run at 1333MHz?...

    You don't have a late 2011 MB Pro.
    You have a 2010 version.  Your MB doesn't support 16GB.  8GB Max.
    That's what it shows on your about this MAC.
    You need to return the RAM and get 8GB ( 2 X 4GB ) 1066MHz.
    Your system bus is set to 1066MHz.
    You're having issues because you've installed more RAM than your MB can support.  It's only reading 4GB per bank which totals to 8GB and not 16GB.

  • I am having major problems with Firefox. About 3 weeks ago I started experiencing the display only when on Firefox for all web site, that the display would be shifted right about half a screen. It only happens on Firefox and happens for all web sites.

    I am having major problems with Firefox. About 3 weeks ago I started experiencing the display only when on Firefox for all web site, that the display would be shifted right about half a screen. It only happens on Firefox and happens for all web sites.

    This issue can be caused by the Babylon Toolbar 1.1.8 extension
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Safari shows "The network connection was lost" for all flv files on the internet.  Firefox plays all

    I upgraded to the lastest version of Flash to fix what I thought was a problem in Firefox.  That problem turned out to be something else but now Safari will not play ANY flash content.  I have uninstalled and reinstalled several times.  I have even installed an older version.  All of these have the exact same result.  Flash works in Firefox but not in Safari.  I have cleared the cache.  I have gone into the flash securty settings and deleted all content.  Nothing seems to change this.  Anyone have any ideas?

    Plug-Ins are installedand keep in mindthis problem affects all 3 browsers i am using IE9, Safari5 & Firefox 19NOT a SPECIFIC browser issuewhich is why i think it's either "Flash" (Adobe) or streaming web-site (Freedocast) issue.
    Date: Mon, 1 Apr 2013 01:25:24 -0700
    From: [email protected]
    To: [email protected]
    Subject: Safari shows "The network connection was lost" for all flv files on the internet.  Firefox plays all
        Re: Safari shows "The network connection was lost" for all flv files on the internet.  Firefox plays all
        created by Sunil_Bhaskaran in Installing Flash Player - View the full discussion
    Have you enabled plug-ins in Safari?Could you please go through the last question of Mac section in the following URL: http://helpx.adobe.com/flash-player/kb/flash-player-faq.html#main-pars text1 Thanks,Sunil
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5195274#5195274
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5195274#5195274
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5195274#5195274. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Installing Flash Player by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Profit center balances transfer from old profit centers to new profit cente

    Dear All,
    My client wants to deactivate all cost centers and profit centers and create new cost centers and new profit centers for new fiscal year 2009.
    So here my queries are
    1. Putting an end date to the existing cost center and creating the New cost center now itself in the system with effective date as 1st April 09?
        I changed validity period in cost center but it does not accept.
    2. How to restrict postings to profit center from April, 2009 ? even changed validity period and changed as inactive mode in profit center,
        It is allowing postings to profit center.
    3. How the balances need to be transferred to New profit centers? I tried in 9KE0 T.code but in this T.code we can transfer profit center and GL A/C wise
        but here we have around 20 profit centers and 100 above Gls, so it will take so much of time, so kindly suggest me short way.
    4. And When can we transfer balances to New profit centers i.e April 1st or after completions of Audit? because client wants to post pending transactions of 2008 FY
        to old profit centers in April and May months. So in this situation how can i proceed?
    5. For mapping the Assets & Liabilities balances as on 31st Mar 2009 to New profit center the following need to be provided
        A. Profit center wise Trail balance
            ( For this i suggested S_PL0_86000030 t.code) is this correct?
        B. Profit center wise Balances of Subsidiary Ledgers i.e Vendors, Customers & Assets
    6. On which date I can close 2008 FY& open 2009 fiscal year for Assets?
    Please guide and provide me solutions above my queries.
    This would be great help for me, Thanks in advance.
    Thanks & Regards,

    1.     You can block cost centers and profit centers and create new or can use same by changing analysis period  Eg: KS02 > Edit > Analysis period
    2.     Select lock indicator in profit center master record
    3.     Write LSMW to that
    6.  At the end of you fiscal year close the asset period and do all year end transactions and open new asset period      
    You can use S_PL0_86000030 check it
    Kesh

  • How to  list postings by other profit centers into my profit center

    Gurujee and SAP experts,
    We are a big FMCG company, called BCompany.  All branches in different cities are their own profit centers under one Company code.  A city from X profit center can post items in my profit center call it Y. E.g  if profit centre paid an expense on behalf of Y profit center, X profit center will credit its bank account and debit Y profi center's expense account.
    Now I would like to spot out all transactions which were posted in Y profit center by staff of say other branches - i.e. non-Y profit centers
    Grateful with many thanks if you guide me How to  list and print such listing.
    Most Sincerely,
    Bapu

    Report KE5Z can be used for the same. Following can be input field
    Profit center : of the plant for which posting is required to be displayed
    Partner Profit center : Profit center who had posted the same
    Please let me know in case any other clarification/details are required
    Anil chawla

  • Find Profit centers based on profit center group

    1)       If I know profit center group how to pick profit centers which belongs to that profit center group.the tcode is (KCH3)
    2)       In the tree there may be many levels I mean for the profit center also contain other profit centers, just to display in the same way as like in KCH3 tcode, how we are going to maintain in alv trees

    Hello,
    Check the tables:
    <b>SETLEAF
    SETNODE
    go through this link which ll give you clear idea about the profit center group.
    http://help.sap.com/bestpractices/industry/serviceindustries/v346c_us/BBLibrary/documentation/B30_BPP_04_E.doc
    go through these tables.
    CEPC Profit Center Master Data Table
    CEPCT Texts for Profit Center Master Data
    </b>
    REgards,
    Vasanth

  • List of profit centers in a profit center group

    Any example about how to obtain the profit centers belonging to a profit center group.
    Thanks

    hi
    good
    check this link
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/ECPCA/ECPCA.pdf
    thanks
    mrutyun^

  • Capacity Report for all work centers

    Is there a way to get the capacity report of more than one work center at the same time(CM01)

    Thanks for the useful reply.
    Capacity planner groups are not maintained though.
    Client uses CM07 first then selects the overall profile and then runs by each workcenter,downloads the results to spreadsheet.Repeat the same for all the work centers.
    Wondering whether there could be a better way.

  • CATA for all cost centers

    Hi experts!!
    I have the following problem:
    t-code CATA works just fine if we select the cost centers one by one, but it dows not work if we do not give any cost center on the selection screen, so that it selects all.
    Any ideas????
    Please help!!!
    Thank you all in advance!!!

    Hi,
    Yes, in CATA no need to select cost centers, once you run this t code , if you have any entries for that cost center it will run for that all cost centers and posted hours to that Cost center.
    Try it it may help.
    Thanks

  • How do I install a Thunderbird add-on for all users? Putting the XPI file into Extensions folder didn't work.

    I'm trying to install Enigmail 1.8.2 for all users. I thought I read somewhere that you don't need to unpack the XPI file.
    Whilst writing this, I did some experimenting and found a solution, but it's messy (see below). Is there an easier way?
    Fresh install of Thunderbird 31.6 on Windows 7 x64. Have observed the following:
    1. If I install the extension for one user via the Add-Ons GUI (from the marketplace, not from a local file), it does work. The Appdata\Roaming\Mozilla\Extensions folder is empty. Folder {847b3a00-7ab1-11d4-8f02-006008948af5} is created in Appdata\Roaming\Thunderbird\Profiles\xxxxxxxx.default\extensions\staged\ and moved from staged to extensions when TB is restarted.
    2. If I download the XPI file from Enigmail site and copy it to Program Files(x86)\Mozilla Thunderbird\Extensions folder, then Thunderbird's Extensions screen says "You don't have any add-ons of this type installed".
    3a. If I rename the xpi to zip (e.g. enigmail-1.8.2-tb+sm.xpi.zip) then I can open it and see that the contents are similar to what was created at point (1). If I unzip the contents, then Thunderbird doesn't recognise the add-on, unless I rename the folder to the GUID above (which could be found in install.rdf or chrome.manifest, once you know what you're looking for).
    Presumably I could also have done a per-user install, copied the folder from the profile, removed the extension, then pasted the copy into the program folder. That would save looking up the GUID but is only a little less fiddly.
    3b. After renaming the folder and restarting TB, it gives me a new tab "Install Add-on" which says "Another program on your computer would like to modify Thunderbird with the following add-on: ... Location: C:\Program Files (x86)". Once I allow the add-on, it is listed in Profiles\xxxxxxxx.default\extensions.ini.
    Aside: Disabling the add-on simply removes the line from extensions.ini, so how does TB distinguish between an unapproved add-on and a disabled one? It seems to be in extensions.json.

    Is Thunderbird already installed in the computers? If so, you could download the .xpi file and drag and drop it into the extensions window (after opening that) to install it in all the computers, following which you click the Install buttons when they become enabled, and you might have to restart Tbird afterwards.

  • How do I search for all "missing" tracks within the iTunes database?

    I found the dreaded ! of death, and sadly I verified the tacks indeed are not on my hard drive.
    Is there a way to sort on this tag so that I can see what else might be missing on my hard drive but remains in the database (sort of similar to how you can search for all tracks that have missing artwork)? 

    Thanks.  It works perfectly.
    URL for anyone else in need:  http://dougscripts.com/123

  • Set the default size for all archive mailboxes including the ones it will be created in the future

    Hi there.
    We are in the phase where we Will enable Online Archive for all the users.
    We see that the default Archiving Quota is set up for 50 GB. We have found this powershell command on MsTechnet forum
    Get-Mailbox -resultsize unlimited | where {$_.ArchiveDatabase -ne $null} | set-mailbox -ArchiveQuota 7GB -ArchiveWarningQuota 6GB
    which I guess it will set up the ArchiveQuota to 7GB to all the users, true?
    The question is if this command will work only for those users who currently have archiving enabled or it Will also work for those users which we are planing to enable archiving in the future?
    The idea is that everyone would not have 50GB by default and this should be a default value also for those who currently do not have archiving enabled.
    with best regards,
    bostjanc

    Hi there.
    I don't quite get it.
    I have created "for example" a database called: STH ARCHIVE.
    Then if I take look on properties of this database this is how it's shown:
    And now here comes the "tricky part" which is a little bit odd to me.
    I have enabled archive on my mailbox and selected this STH ARCHIVE DB to hold this archive mailbox.
    Then I have manually ran ManagedFolderAssistant for my account: Start-ManagedFolderAssistant -Identity "my-email-address"
    And after I have greped the size of my mailbox:
    Get-Mailbox | Get-MailboxStatistics -Archive | Sort totalitemsize -desc | ft displayname,totalitemsize, itemcount >C:\report-archive-database-mailboxes.txt
    And get the result:
    Personal Archive - MYUSERNAME
    TotalItemSize: 4.071 GB (4,371,586,689 bytes)  
    ItemCount: 55227
    So now I don't understand how I was able to go thru that sizes which are in the upper print screen of archive DB properties?
    bostjanc

Maybe you are looking for