Sun Java Web Server and IPlanet

Are there any issues with running IPlanet and Sun Java Web Server at the same time. The old Web-site are in Servlet format and the new Web site will be deployed with a .war file, so I would like to run both at the same time until I have customized the new Sun Java Web Server instance. Is this possible and if so are there any issues with running them at the same time?

You can install iPlanet Web Server and Sun Java System Web Server on the same Solaris system, provided that each server is installed to a separate directoy. If each server is configured to listen on a different port and/or IP address, the two servers can run concurrently without problem.

Similar Messages

Sun Java Web Server and SLES 10

I have just downloaded and installed Sun Java Web Server under SuSE Linux Enterprise Server 10, however are unable to get it to work. The installer runs fine however I am unable to start the admin server. The message i receive is
Sun Java System Web Server 7.0U1 B06/12/2007 21:21
catastrophe: CORE3260: Server crash detected (signal SIGSEGV)
failure: server initialization failed
The error log is not terribly helpful either.
[27/Oct/2007:16:46:32] info (14424): CORE1116: Sun Java System Web Server 7.0U1 B06/12/2007 21:21
[27/Oct/2007:16:46:33] catastrophe (14425): CORE3260: Server crash detected (signal SIGSEGV)
Any help would be gratefully appreciated

Thanks for the reply Chilideveloper, here is the output of the core dump. I hope it is a) the right thing and b) helpful
GNU gdb 6.6
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i586-suse-linux"...
(no debugging symbols found)
Using host libthread_db library "/lib/libthread_db.so.1".
warning: Can't read pathname for load map: Input/output error.
Reading symbols from /sun/webserver7/lib/liblibdbm.so...(no debugging symbols found)...done.
Loaded symbols for /sun/webserver7/lib/liblibdbm.so
Reading symbols from /sun/webserver7/lib/libns-httpd40.so...(no debugging symbols found)...done.
Loaded symbols for /sun/webserver7/lib/libns-httpd40.so
Reading symbols from /sun/webserver7/lib/liblibsi18n.so...
(no debugging symbols found)...done.
Loaded symbols for /sun/webserver7/lib/liblibsi18n.so
Reading symbols from /sun/webserver7/lib/libgetprop.so...(no debugging symbols found)...done.
Loaded symbols for /sun/webserver7/lib/libgetprop.so
Reading symbols from /sun/webserver7/lib/libnsprwrap.so...
(no debugging symbols found)...done.
Loaded symbols for /sun/webserver7/lib/libnsprwrap.so
Reading symbols from /sun/webserver7/lib/libldap60.so...(no debugging symbols found)...done.
Loaded symbols for /sun/webserver7/lib/libldap60.so
Reading symbols from /sun/webserver7/lib/libprldap60.so...
(no debugging symbols found)...done.
Loaded symbols for /sun/webserver7/lib/libprldap60.so
Reading symbols from /sun/webserver7/lib/libsasl.so...(no debugging symbols found)...done.
Loaded symbols for /sun/webserver7/lib/libsasl.so
Reading symbols from /sun/webserver7/lib/libxerces-c.so.26...
(no debugging symbols found)...done.
Loaded symbols for /sun/webserver7/lib/libxerces-c.so.26
Reading symbols from /sun/webserver7/lib/libxalan-c.so.19...(no debugging symbols found)...done.
Loaded symbols for /sun/webserver7/lib/libxalan-c.so.19
Reading symbols from /sun/webserver7/lib/libxalanMsg.so.19...
(no debugging symbols found)...done.
Loaded symbols for /sun/webserver7/lib/libxalanMsg.so.19
Reading symbols from /sun/webserver7/lib/libpcre.so.0...done.
Loaded symbols for /sun/webserver7/lib/libpcre.so.0
Reading symbols from /sun/webserver7/lib/libicui18n.so.3...done.
Loaded symbols for /sun/webserver7/lib/libicui18n.so.3
Reading symbols from /sun/webserver7/lib/libicuuc.so.3...done.
Loaded symbols for /sun/webserver7/lib/libicuuc.so.3
Reading symbols from /sun/webserver7/lib/libicudata.so.3...done.
Loaded symbols for /sun/webserver7/lib/libicudata.so.3
Reading symbols from /sun/webserver7/lib/libplc4.so...done.
Loaded symbols for /sun/webserver7/lib/libplc4.so
Reading symbols from /sun/webserver7/lib/libplds4.so...done.
Loaded symbols for /sun/webserver7/lib/libplds4.so
Reading symbols from /sun/webserver7/lib/libnspr4.so...done.
Loaded symbols for /sun/webserver7/lib/libnspr4.so
Reading symbols from /lib/libpthread.so.0...done.
Loaded symbols for /lib/libpthread.so.0
Reading symbols from /lib/libdl.so.2...done.
Loaded symbols for /lib/libdl.so.2
Reading symbols from /lib/libcrypt.so.1...done.
Loaded symbols for /lib/libcrypt.so.1
Reading symbols from /lib/libresolv.so.2...done.
Loaded symbols for /lib/libresolv.so.2
Reading symbols from /usr/lib/libstdc++.so.5...done.
Loaded symbols for /usr/lib/libstdc++.so.5
Reading symbols from /lib/libm.so.6...done.
Loaded symbols for /lib/libm.so.6
Reading symbols from /lib/libgcc_s.so.1...done.
Loaded symbols for /lib/libgcc_s.so.1
Reading symbols from /lib/libc.so.6...done.
Loaded symbols for /lib/libc.so.6
Reading symbols from /sun/webserver7/lib/libssl3.so...done.
Loaded symbols for /sun/webserver7/lib/libssl3.so
Reading symbols from /sun/webserver7/lib/libsmime3.so...done.
Loaded symbols for /sun/webserver7/lib/libsmime3.so
Reading symbols from /sun/webserver7/lib/libnss3.so...done.
Loaded symbols for /sun/webserver7/lib/libnss3.so
Reading symbols from /sun/webserver7/lib/libnsfc.so...done.
Loaded symbols for /sun/webserver7/lib/libnsfc.so
Reading symbols from /sun/webserver7/lib/libnstp.so...done.
Loaded symbols for /sun/webserver7/lib/libnstp.so
Reading symbols from /sun/webserver7/lib/libnstime.so...done.
Loaded symbols for /sun/webserver7/lib/libnstime.so
Reading symbols from /sun/webserver7/lib/libsupport.so...done.
Loaded symbols for /sun/webserver7/lib/libsupport.so
Reading symbols from /sun/webserver7/lib/libares3.so...done.
Loaded symbols for /sun/webserver7/lib/libares3.so
Reading symbols from /usr/lib/libz.so.1...done.
Loaded symbols for /usr/lib/libz.so.1
Reading symbols from /sun/webserver7/lib/libxsd2cpp.so...done.
Loaded symbols for /sun/webserver7/lib/libxsd2cpp.so
Reading symbols from /sun/webserver7/lib/libssldap60.so...done.
Loaded symbols for /sun/webserver7/lib/libssldap60.so
Reading symbols from /lib/ld-linux.so.2...done.
Loaded symbols for /lib/ld-linux.so.2
Reading symbols from /sun/webserver7/lib/libsoftokn3.so...done.
Loaded symbols for /sun/webserver7/lib/libsoftokn3.so
Reading symbols from /lib/libnss_compat.so.2...done.
Loaded symbols for /lib/libnss_compat.so.2
Reading symbols from /lib/libnsl.so.1...done.
Loaded symbols for /lib/libnsl.so.1
Reading symbols from /lib/libnss_ldap.so.2...done.
Loaded symbols for /lib/libnss_ldap.so.2
Reading symbols from /usr/lib/libldap-2.3.so.0...done.
Loaded symbols for /usr/lib/libldap-2.3.so.0
Reading symbols from /usr/lib/liblber-2.3.so.0...done.
Loaded symbols for /usr/lib/liblber-2.3.so.0
Reading symbols from /usr/lib/libgssapi_krb5.so.2...done.
Loaded symbols for /usr/lib/libgssapi_krb5.so.2
Reading symbols from /usr/lib/libsasl2.so.2...done.
Loaded symbols for /usr/lib/libsasl2.so.2
Reading symbols from /usr/lib/libssl.so.0.9.8...done.
Loaded symbols for /usr/lib/libssl.so.0.9.8
Reading symbols from /usr/lib/libcrypto.so.0.9.8...done.
Loaded symbols for /usr/lib/libcrypto.so.0.9.8
Reading symbols from /usr/lib/libkrb5.so.3...done.
Loaded symbols for /usr/lib/libkrb5.so.3
Reading symbols from /usr/lib/libk5crypto.so.3...done.
Loaded symbols for /usr/lib/libk5crypto.so.3
Reading symbols from /lib/libcom_err.so.2...done.
Loaded symbols for /lib/libcom_err.so.2
Reading symbols from /usr/lib/libkrb5support.so.0...done.
Loaded symbols for /usr/lib/libkrb5support.so.0
Reading symbols from /sun/webserver7/lib/libj2eeplugin.so...done.
Loaded symbols for /sun/webserver7/lib/libj2eeplugin.so
Reading symbols from /root/Downloads/java/jdk1.6.0_03/jre/lib/i386/server/libjvm.so...done.
Loaded symbols for /root/Downloads/java/jdk1.6.0_03/jre/lib/i386/server/libjvm.so
Reading symbols from /sun/webserver7/lib/libdavplugin.so...done.
Loaded symbols for /sun/webserver7/lib/libdavplugin.so
Reading symbols from /sun/webserver7/lib/libwebdav.so...done.
Loaded symbols for /sun/webserver7/lib/libwebdav.so
Reading symbols from /sun/webserver7/lib/libfreebl3.so...done.
Loaded symbols for /sun/webserver7/lib/libfreebl3.so
Reading symbols from /sun/webserver7/lib/libnssckbi.so...done.
Loaded symbols for /sun/webserver7/lib/libnssckbi.so
Core was generated by `webservd -d /sun/webserver7/admin-server/config -r /sun/webserver7 -t /tmp/admi'.
Program terminated with signal 11, Segmentation fault.
#0 0xb67bbdd5 in strtok () from /lib/libc.so.6

Sun Java Web Server 7 and JNDI Jell

Hi all,
I am building a normal Java EE web app (WAR file), and I was originally developing on GlassFish v2.1 and everything was beautiful. Now, I found out our shared server is Sun Java Web Server 7, but the sys admin said everything should run fine as long as I wasn't using JSB's.
I downloaded and installed SJWS7 on my local machine so I could test my application against it, and JPA and SJWS7 are not getting along.
I am trying to bind my persistence.xml to the data source I created on SJWS7.
SJWS7 JDBC Resource: jdbc/pact
persistence.xml:
    <persistence-unit name="pact" transaction-type="RESOURCE_LOCAL">
        <description>PA/Circuit Tracking Development</description>
        <provider>org.hibernate.ejb.HibernatePersistence</provider>
        <non-jta-data-source>java:comp/env/jdbc/pact</non-jta-data-source>
        <properties>
        ....There is nothing in sun-web.xml or web.xml that references this resource (although I tried that too, and no go).
The traceback I get is:
<code>Caused by: javax.naming.NameNotFoundException: PWC4216: Name pact is not bound in this Context
     at org.apache.naming.NamingContext.lookup(NamingContext.java:778)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:148)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:789)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:148)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:789)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:148)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:789)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:161)
     at org.apache.naming.SelectorContext.lookup(SelectorContext.java:147)
     at javax.naming.InitialContext.lookup(InitialContext.java:351)
     at org.hibernate.connection.DatasourceConnectionProvider.configure(DatasourceConnectionProvider.java:52)
     ... 151 moreI've been trying for almost an entire day now, and googling isn't revealing anything helpful. I don't know what I'm doing wrong. Can anyone point me in the right direction?

u should be using
- default installation ( you can also use silent installation for this)
admin-server/bin/startserv
wadm delete-instance --user admin
wadm delete-config --user admin

Sun Java Web Server Exception

I am running Sun Java Web Server 6.1 SP5 on a locked down Solaris 8 system. I am seeing a PrivilegedActionException, which encloses a FileIOException, when the code tries to initialize SSL (more specifically, reading the keystore file) to make a web service call. However, when I log in as the user that the web server is running as (iplanet), and I cut-n-paste the offending path from the error log to the ls command, I can see the file, verify that everyone has read permissions, and can even open the file via keytool sucessfully. Can someone point me towards what I am overlooking? I'm out of ideas; I can't see why I should be able to read the keystore file as the user, but the web application, running as the same user, can't.
I apoligize for not pasting the exact error here. The system in question is not connected to the Internet.
Thanks,
Dave

I take it you have enabled the Java SecurityManager? That is rarely recommended, what's the end goal that led to that?
Hopefully you can find a way to copy at least the most relevant parts (at least the last few most specific stack traces for each enclosing exception) of the error message, otherwise it is difficult to try to guess without data.
Is the code trying to read or write to the file? Have you modified the default permissions?
truss the process to see if the error is at that level or at the security manager level.

Deploy .war or .ear file to sun java web server 7.0 update 4

Hi
This could be a very daft question, but still I would like to get a clarification.
My clients are a financial organisation, and for security and various other reasons they accept only .ear files. But this time the development and deployment would be done on Sun Java Web Server 7.0 update 4 . Now since its a web server I don't think I can deploy an .ear file.
But sure I would like to get an answer from the experts here, is it possible to deploy and .ear file to Sun Java Web Server 7.0 before I can go back to my clients.
Please help me here as I'm in a real big confusion here. Your help would be highly valuable to me.
Thanks
Jagdish

Hi
Thanks for the reply and I appreciate your help. Well I tried deploying an .ear file directly and web server 7 complains that it doesn't have a .war extension, understandably so.
And then ripping apart the .ear file and deploying the .war file does work, as is expected of a web server.
Well, about my customer is a bank and they have a very tight security policy, and why they need an .ear file is beyond my understanding. Well as far as this issue is concerned, I need a strong point so that I can get back to them that we need to comply to the third party software.
But I didn't wan't to get back to them saying we can only provide a .war file and then later find out an .ear file could have done the job. And being seen as the technical experts we can't afford to make any mistake.
Thanks
Jagdish

Php with xsl on Sun Java Web Server 7.0

Hi anyone,
i installed php as nsapi via phppack. Now i need xsl support in php. I've tryed to compile php with the following line (php 5.2.6):
./configure with-nsapi=/export/netscape_71 enable-force-cgi-redirect with-gettext with-zlib --with-xsl=/usr/lib64/php5/extensions
magnus.conf, obj.conf and mime.types are assimilate to this article:
http://developers.sun.com/webtier/reference/techart/php2.html
After compiling, i copy the libphp5.so in the .plugins/php/ dir an restart the webserver.
He stops with this message:
failure: CORE2253: Error running Init function load-modules: dlopen of /export/netscape_71/plugins/php/libphp5.so failed (/export/netscape_71/plugins/php/libphp5.so: wrong ELF class: ELFCLASS64)
failure: server initialization failed
What's going wrong?
How i get xsl Support on Sun Java Web Server?
thanks!

essential wrote:
./configure with-nsapi=/export/netscape_71 enable-force-cgi-redirect with-gettext with-zlib --with-xsl=/usr/lib64/php5/extensionsYou are pointing to 64-bit library path. Change it to 32-bit library path.
failure: CORE2253: Error running Init function load-modules: dlopen of /export/netscape_71/plugins/php/libphp5.so failed (/export/netscape_71/plugins/php/libphp5.so: wrong ELF class: ELFCLASS64)
failure: server initialization failedThis means that it expects a 32-bit library but it found a 64-bit one.

Install certifcate on sun java web server 7.0

we just moved away from IIS and servlet exec because of issues we are having with the speed. sun java web server was like 4 times faster. we had the web app up and running, but for some reason we couldnt figure out how to install a certificate. i went through the request wizard and got the code and sent it to digicert and got my code for the certificate. i then installed it by pasting it, after i finish i get this error (unknown option 'by'). can someone point me in the right direction.
my only guess so far was i am using *.domain.com in the domain field, when you request the certificate.

I can't see anything wrong with the steps you followed to install the certificate. Are you using Web Server 7.0 or Web Server 7.0 update 1? As far as I remember, in Web Server 7.0, wildcard characters like * were not allowed in the "Server Name(cn)" field of request certificate wizard. This got fixed in 7.0 update1 release.
Can you post you server logs so that we can figure out what is wrong? You can as well try certutil command as been suggested by mv and let us know if you could manage to install the certificate.

Problem installing Sun Java Web Server

Hi
I'm trying to install Sun Identity Server which need Sun Java Web Server...
I try to install identity server and web server using Sun Java Enterprise System Install Wizard...
When I came to page Identity Server:Sun Java System Web Server (3 of 6 ) and I entered Hostname, dir1.usmnet, I get an error pop-up window stating Host Name is not valid......but if I typed dir1.domain.com the error message didn' t appear.....
I'm using Solaris 9 on Intel platform. I have setup my network and able to ping to other valid hostname in my LAN....
FYI my network information are as follows
/etc/hosts
127.0.0.1 localhost
<my ip > dir dir.usmnet loghost
/etc/hostname.elxl0
dir1
/etc/resolv.conf
domain usmnet
nameserver <dns server ip>
search usmnet
I have also setup /etc/netmasks and /etc/defaultrouter
When I type the domainname command, nothing appeared
What when wrong, I could ping to my dns server and to other computer in this LAN, could anybody give a suggestion ?

OK, found the solution by myself.
The Administrator's Guide mentiones the possibility to install a certificate with the wadm CLI, so I tried that:
wadm> install-cert -v --config=www -y server -n Server-Cert /www.crt
Please enter token-pin>
ADMIN4086: The Certificate could not be installedThe CLI Reference Manual says for the command install-cert, option --replace*:
"Note --replace option of install-cert CLI is deprecated
and currently using this option may not work as expected.
For replacing a CA-signed certificate, users should delete the
cert using delete-cert CLI and then install the new one
using install-cert CLI."
wadm> install-cert -v --config=www -y server -n Server-Cert --replace /www.crt
Please enter token-pin>
ADMIN4112: No Private key foundOK, so maybe if I had installed the first certificate (before generating the new CSR) that would have worked, I don't know.
Deleting the old cert doesn't work at once:
wadm> delete-cert -v --config=www Server-Cert
Please enter token-pin>
ADMIN4139: Certificate Server-Cert is being referred to by listeners: http-listener-2So before deleting you have to remove the certificate from the listener. Then:
wadm> delete-cert -v --config=www Server-Cert
Please enter token-pin>
CLI201 Command 'delete-cert' ran successfully
wadm> install-cert -v --config=www -y server -n Server-Cert /www.crt
Please enter token-pin>
CLI201 Command 'install-cert' ran successfullyAfter re-adding the certificate to the ssl listener and deploying all the changes to the servers
everything is fine.
F.D.

Is Sun Java Web Server 6.1 compatible with RedHat 5.5

Hi,
Sun Java web Server 6.1 installed on Red Hat 5.1 and Opertaing System is going to be upgraded to Red Hat 5.5. Can any one tell me whether Sun Java Web Server 6.1 is compatible with Red Hat Linux 5.5

If you want the internal server to service requests for /admin, you should teach the internal server to service requests for /admin.
It is possible -- but complicated -- to configure Web Server 6.1 to rewrite request URIs before proxying requests to the internal server. However, unless you rewrite all the HTML generated by the internal server, the results probably won't be what you want. Consider, for example, what happens if the internal server's HTML references /foo.gif. Does that mean the web browser should ask for /admin/foo.gif or /foo.gif?
Rewriting request URIs is much simpler in Web Server 7.0, but it's still probably not the right tool.

Unable to start sun java web server 6.1 SP4

Hi,
I have recently installed sun java web server 6.1 SP4 on solaris 10. The directory structure it created was completely different from the one mentioned in the documentation. I could not find the https-adminserv directory under the web server root directory. Instead the closest directory was bin/https/httpadmin/bin directory. On executing ./start it gave an error
ld.so.1: start: fatal: libssl3.so: open failed: No such file or directory
Killed
Any help is welcome. Thanks.
I had not installed the webserver in the standard location /opt/SUNWwbsrvr but in /BCP partition.

also, you can do something like
cd https-admserv
sh -x start
this will show as to what is the current LD_LIBRARY_PATH is pointing to and why ssl3.so is not getting loaded.
if you don't see
https-* under web server install root directory, then something wrong with your installation as well.
yes, if u stand alone version of web server, then you shouldn't run into any dependencies issue. u can also get 6.1 sp6 version from web - http://www.sun.com/webserver

Sun Java Web Server Administration Server Backup

Hi!
I've a question about Sun Java Web Server Administration Server backup, how it's possible to backup all the config, the Administration Nodes keys included? I'm thinking about in case of full damage of Administration Server how can I install a new one and restore all the config so I can manage the cluster again? Or it is necessary to re-register the Node's to the new Administration Server? In this case how can I restor to the Administration Server the application's, virtual servers, etc...?
Regards,
bzg

The Admin Server is another instance of Web Server, but with some web-apps that know how to manage configuration files, etc. There's nothing real magical going on in there. You should be able to wholesale backup the entire directory and, if needed, restore it (in fact I've done this several times).
The files in the admin instance are considered a private interface, meaning that Sun does not guarantee that they won't change in location or format from one Update to another, but in practice they rarely change.
Regarding the nodes specifically - communication between the nodes and the admin instance is done over SSL using a self-signed certificate that was generated when the admin server was installed. The certificate is in the admin instance's config/cert8.db and key3.db files just as it would be for any "normal" instance. Keep those backed up along with admin-serv/config-store/ and you should feel pretty confident that you have the configs, nodes, and certificate/key backed up.
Again - the files in the admin instance are considered a private interface. There are no user-serviceable parts inside. You may burn your fingers and start a fire. Your mileage may vary. Files from WS7.0u4 may break things if restored into a WS7.0u10 deployment, etc etc etc.

Perl Buffer Issue on Sun Java Web Server 7_3

I currently migrating a website built using Perl on Apache. I was able to setup the Sun Java Web Server to run the site without any errors. During testing we noticed one small anomoly that I just can't figure out. Many of the Perl scripts run for 30+ seconds. The scripts render a portion of the response, HTML, that displays a status to the user. In Apache this displays fine, but in the Sun Java Web Server nothing is displayed until the script is complete. We have the "$| = 1;" command sprinkled throughout the scripts to properly flush the buffer, but that doesn't seem to work. Is there a config option that I'm missing that will help flush the buffer from CGI programs? Any help would be greatly appreciated.

I made the change in my /webserver7/https-webserver.fmr.com/config/obj.conf file. Here is a complete copy of my obj.conf file. I've restarted the webserver instance and still the buffer doesn't seem to be flushing anything to the client until the perl script is done running.
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="ntrans-j2ee" name="j2ee"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/apps/sun/webserver7/lib/icons" nam
e="es-internal"
PathCheck fn="uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index-j2ee"
PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"
ObjectType fn="type-j2ee"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="index-common"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
Service method="TRACE" fn="service-trace"
Error fn="error-j2ee"
AddLog fn="flex-log"
</Object>
<Object name="j2ee">
Service fn="service-j2ee" method="*"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn="send-cgi" bucket="cgi-bucket" UseOutputStreamSize=0
</Object>
<Object name="send-precompressed">
PathCheck fn="find-compressed"
</Object>
<Object name="compress-on-demand">
Output fn="insert-filter" filter="http-compression"
</Object>

Using Sun Java Web Server 2.0 for XSQL

In the documentation for XSQL, a number of Java Web servers are described but not Sun java web server. I need to know the configuration for Sun java web server 2.0 for running XSQL.
null

This is not enough information to be useful.

Sun java directory server and Active Directory

We are using two different directory servers Sun java directory server and active directory.
My question is how we can have password synchronization between these two directory servers.
I have checked Sun Java[TM] System Identity Synchronization for Windows 1 2004Q3
http://www.sun.com/download/products.xml?id=41537425
It seems that it's supported platforms is only for solaris and windows , but I have installed my Sun java directory server on linux and obviously it doesn't work for me.
I would be grateful if anyone can suggest a solution to work around this situation.
I have checked identity manager , I would like to know that if I can do this using this product.
http://www.sun.com/software/products/identity_mgr/specs.jsp
--regards.
Sara

Yes RHEL 4 is a supported OS with DSEE 6.0.
Identity Synchronization for Windows is a part of DSEE that allows synchronization of users, passwords and groups between Sun Directory Server and Active Directory bi-directionally without altering the users environments, ie it does not require that users change their current habits.
Identity Manager is a complete identity management solution that is targetting enterprise work flow when it comes to user provisioning and de-provisioning, but also allows to build authentication and password change forms that will provision the passwords to many different systems including Sun Directory Server and Active Directory but also IBM mainframes, legacy applications, databases...
If you are implementing a complete identity management solution, then go with Identity Manager. If you need a lightweight and fast solution for just synchronizing users and passwords between Sun DS and MS AD, Identity Synchronization for Windows should be your choice.
Regards,
Ludovic.

Sun java web server for Zlinux (Linux for System Z)?

Hi
thank you for reading my post
Is there any version of Sun java web server available for Z linux?
Or its better to say whether linux edition of sun java web server run under Zlinux (linux for System Z)
thanks

No version of Web Server is certified on ZLinux.

Sun Java Web Server and IPlanet

Similar Messages

Maybe you are looking for