Sun messaging server 7 installation

Dear All,
I am trying to install sun messaging server 7 on an X86 machine.
However, when i try to run the commpkg install or upgrade i get the below (noting that i am using DS 6.0)
bash-3.00# pwd
/opt/sun/comms/CommsInstaller/bin
bash-3.00# ./commpkg install
-- LOGFILE: /tmp/CommsInstaller_20081218091111.log
Can not find the distro containing the Packages, i.e. could not find
/opt/sun/comms/CommsInstaller/bin/SunOS_i386/ST/Packages
Be sure you are specifying a distro for the SunOS i386 platform
Exiting at /opt/sun/comms/CommsInstaller/bin/../lib/CI/Distro.pm line 64.
Moreover, after installation, i have modified the http port to 81 and once i logged from the browser i got this
Messenger Express has been removed
Messenger Express is not supported in this version of Messaging Server.
What does this mean?
Regards,
Scotty

s@mira123 wrote:
bash-3.00# pwd
/opt/sun/comms/CommsInstaller/bin
bash-3.00# ./commpkg installYou use the ./commpkg command from the directory listed above uninstall the software. If you want to install/upgrade you need to download comm-suite-6, unzip it, and then run the ./commpkg install command from that directory.
You will see that when you unzip the full comm-suite-6 download there is a SunOS_i386 directory which includes all the software that can be installed.
Moreover, after installation, i have modified the http port to 81 and once i logged from the browser i got this
Messenger Express has been removed
Messenger Express is not supported in this version of Messaging Server.
What does this mean?It means exactly what it says. Messenger Express has been removed. It has been deprecated for a few versions now and every single 6.3 patch has said at the end on the patch installation that Messenger Express will be removed in a future version, so does the documentation/release notes:
http://wikis.sun.com/display/CommSuite6/Messaging+Server+7.0+Release+Notes#MessagingServer7.0ReleaseNotes-MessengerExpress
If you want to use webmail you now use either UWC/CE or Convergence as the webmail interface.
Regards,
Shane.

Similar Messages

Sun Messaging Server message-store inside zone (container)

Hi Guys,
i'm running Sun Messaging Server 7.3-11.01 (64bit, sparc).
Do you now if message-store inside a zone is supported?
Thank's in advance!
Caius

Yes, it is supported. For more info see [Installing Communications Suite on Solaris Zones|http://wikis.sun.com/display/CommSuite7/Installing+Communications+Suite+on+Solaris+Zones].

Installing Sun Messaging Server on DMZ Architecture

Hello,
we want to install Sun Messaging Server in a DMZ Architecture and I need know if it is possible to install the Messaging Server on the private network to protect data and users, and a pop agent on the DMZ which allows the public to access to mail accounts.
For this I want to know how to install Sun Messaging Server, so I install two instances of Messaging Server over the DMZ and the other on Private, and then what there components that need be configured in each side (Store, SMTP in Private and POP in DMZ).
Finally Thank you for your understanding.
Good works.
Mabrouk Bouchoucha
GS1 Tunisia

GS1-Tunisia wrote:
we want to install Sun Messaging Server in a DMZ Architecture and I need know if it is possible to install the Messaging Server on the private network to protect data and users, and a pop agent on the DMZ which allows the public to access to mail accounts.This is very-much possible and is in-fact a common deployment. There is an example here:
http://docs.sun.com/app/docs/doc/819-4439/acrqg?a=view
In your case Tier 2 would be inside the DMZ (private network) and Tier 1 outside the DMZ (public network).
For this I want to know how to install Sun Messaging Server, so I install two instances of Messaging Server over the DMZ and the other on Private, and then what there components that need be configured in each side (Store, SMTP in Private and POP in DMZ).MTA + MMP + Webmail daemon go on the private network.
Store + MTA goes on the public network.
Regards,
Shane.

Does Sun Messaging Server support Microsoft Active Directory

Hello,
I just got this qustion. Does Sun Messaging Server work with Microsoft Active Directory?
Thanks.

Please post in the messaging server forum: [http://forums.sun.com/forum.jspa?forumID=708|http://forums.sun.com/forum.jspa?forumID=708]

Sync Sun Messaging Server Address Book with Mac OS X Address Book

Hello,
I am wondering whether there is a way to synchronise my address books inside Sun Message Server and on my Mac?
Does anybody know how do to this? I tried an VCF export of all my contacts from my Mac address book and imported it with the Web mailer interface Sun Java System Communications Express.
The import was done without any errors but all emails and phone data is gone so finally I got several empty contacts.
Is this a known problem? Is there a workaround or a fix available?
Does anybody know a better way for synchronization in both directions and without duplicating all records on a second import?
Thanks in advance and best regards
Thorsten

thoreimers wrote:
I am wondering whether there is a way to synchronise my address books inside Sun Message Server and on my Mac?
Does anybody know how do to this? I tried an VCF export of all my contacts from my Mac address book and imported it with the Web mailer interface Sun Java System Communications Express.
The import was done without any errors but all emails and phone data is gone so finally I got several empty contacts.
Is this a known problem? Is there a workaround or a fix available?Communications Express only supports VCARD 2.1 which may be causing the problem. Have you tried importing into Convergence which supports VCARD 2.1 and 3.0?
You can try the demo site here:
http://commsuite.demo.sun.com:7080/iwc
username: field5
password: cosmo
Are you able to provide an example of a single exported contact that doesn't work (import into CE)?
Does anybody know a better way for synchronization in both directions and without duplicating all records on a second import?If you can find a syncml client that is able to sync records with the Mac Address Book then you may be able to use the Mobile Communications software to sync contact information:
http://wikis.sun.com/display/CommSuite/Sun+Java+Mobile+Communications+Documentation
Regards,
Shane.

Sun Directory Server Installation

Hi all,
I am a student in a Computer Science degree and as my project i am designing a web application that allows users to exchange ideas through a "messaging" system.
After discussion with my tutors we have come up with a design idea that we would use an LDAP server to authenticate users as well as keep message details such as Topic, message header, etc. The actual body of the msg should be kept in a separate database.
To the point....
It has been suggested that i use the Sun Java System Directory Server 5.2 for this project and i was also given a compressed installation package. I have tried to install this and received error msgs similar to the ones i have found others have had in this forum.
For example topics:
1. Forums - Directory Server configuration issues in Windows
2. Forums - Install failed on Windows XP
I am using windows XP and from what i have read although it is not supported some people have managed to get this to work. Also i read that maybe Studio enterprise might solve this issue or provide some support?
Is this true and if so can someone give me some guidance on how to achieve this?
Also i would appreciate your opinion on wether this design approach( LDAP for authentication and database for store) is feasible or technicaly "correct" and maybe suggestions to a different approach....

I think that its never a bad idea to get acquainted with something like the Sun Directory Server although I'm not sure that means that one HAS to use it in a project.
The DS can be a pain to get up but for the most part if you get the latest DS5.2 Q4 or something...most installations go smoothly. If it was me I would just chuck every thing about the convo into the directory but I'm sure that there's a reason that you want to use the DS in conjuction with other storage DBs.
I don't think you need to get Studio enterprise. I was able to get it up and running all by itself on windows. After I installed it I jsut made sure to remember the two random ports it picks up for Admin and DS ldap usage. Also I changed the password expiry time of the account that is used by the Admin console.
GLuck with this.
Cheers,
- Pulkit

Clean up queue in SUN Messaging Server 6.3

I have a couple of SUN Messaging servers with each about a 1'000'000 e-mail messages in their queues.
The reason is one of our customers being infected with some trojan, and a firewall misconfiguration which allowed direct access to the SUN messagings servers (where we host our customers mailboxes) , rather then through the Postfix boxes with rate limiting, anti-spam and anti-virus scanning which they are supposed to use as outgoing SMTP servers. In short we were used as a SPAM relay. Grrr.
As you can image the queue is now filled with undeliverable e-mail and undeliverable bounces.
The question is simply can I safely delete the offending messages from the queue directory, because the imsimta qclean does a lousy job.
imsimta qclean -content=<IP-OFFENDER> -delete* found only 75'000 messages from which 20% was removed. A simple grep <IP-OFFENDER> found still thousand of messages in the queue.
Arg, by default imsimta qclean only scans message ID's found in it's own database which is limited in size (and much smaller then our actual queue size)
imsimta qclean -content=<IP-OFFENDER> -directory_tree -delete* scans the actual queue directory and found indeed over a million mail messages in the queue. After scanning for a couple of hours it removed 150'000 messages. Leaving about 85% of the spam mails untouched!
Is it safe to simply use a shell script to find and remove the messages in the queue directory and delete them? Or will that break SUN messaging servers internal queue handler?
TIA
Herman

Hi,
hbruijn wrote:
The reason is one of our customers being infected with some trojan, and a firewall misconfiguration which allowed direct access to the SUN messagings servers (where we host our customers mailboxes) , rather then through the Postfix boxes with rate limiting, anti-spam and anti-virus scanning which they are supposed to use as outgoing SMTP servers. In short we were used as a SPAM relay. Grrr.As an aside, Messaging Server 6.3 also offers rate-limiting capability (metermaid) and various anti-virus/anti-spam capability. I wrote up a general document about this at:
http://msg.wikidoc.info/index.php/Main_Page
As you can image the queue is now filled with undeliverable e-mail and undeliverable bounces. You are not the only forum person to hit such an issue recently:
http://forum.java.sun.com/thread.jspa?threadID=5210669&messageID=9848719
The question is simply can I safely delete the offending messages from the queue directory, because the imsimta qclean does a lousy job. Yes. If the job_controller sees that the message has been deleted, it will simply remove the queued message from its cache and move on. Depending on your log level you may see an entry in the imta log file about this.. something along the lines of file <queue file> no longer exists.
imsimta qclean -content=<IP-OFFENDER> -delete* found only 75'000 messages from which 20% was removed. A simple grep <IP-OFFENDER> found still thousand of messages in the queue.
Arg, by default imsimta qclean only scans message ID's found in it's own database which is limited in size (and much smaller then our actual queue size)By default the job_controller will only keep a maximum of 100,000 messages in cache - a percentage of this is dedicated towards new emails and the rest is queued emails. This limit is to stop the job_controller consuming all your available RAM when you get hit by events such as this. The imsimta qclean uses this cache to search for messages -- which is vastly quicker then (re)scanning so many emails on disk.
The maximum is controlled by the MAX_MESSAGES job_controller.cnf parameter - discussed here:
http://docs.sun.com/app/docs/doc/819-4428/6n6j425uh?l=en&a=view&q=max_messages
and here:
http://docs.sun.com/app/docs/doc/819-4428/6n6j425v7?l=en&a=view#bgajv
imsimta qclean -content=<IP-OFFENDER> -directory_tree -delete* scans the actual queue directory and found indeed over a million mail messages in the queue. After scanning for a couple of hours it removed 150'000 messages. Leaving about 85% of the spam mails untouched! Well I can't explain this off-hand. I would need to try and reproduce the issue in-house with an example email that wasn't matched. What version of MS6.3 are you running (./imsimta version)?
btw. you can use the "-threads=<number from 1-8>" qclean command to speed up the scanning process by running multiple scanning threads.
Is it safe to simply use a shell script to find and remove the messages in the queue directory and delete them? Or will that break SUN messaging servers internal queue handler?Should be fine - once you have removed them though you may want to run:
./imsimta cache -sync
This will kick-off a re-sync of the job_controller cache so that the job_controller is better able to process the remaining emails (rather then hitting missing email after missing email).
Regards,
Shane.

Is there any impact chaning ip on sun messaging server?

Hi all,
I have configured and running two sun messaging servers MTA and MS.
e.g
MTA ip address - 192.168.10.1
MS ip address - 192.168.10.2
Is it possible to change ip address on these messaging servers to another ip range? Do I need to change any messaging config file after changing ip address?
Following is my messaging server version:
./imsimta version
Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)
libimta.so 6.2-3.04 (built 01:43:03, Jul 15 2005)
SunOS mta3 5.9 Generic_118558-34 sun4u sparc SUNW,Sun-Fire-280R
Please let me know. Thanks.

Question was asked (and answered) here:
http://lists.balius.com/pipermail/info-ims-archive/2009-February/016723.html
Regards,
Shane.

SUN messaging server 7.0 HA in cluster 3.2

Hi all,
I Can't start message server resource group
Please follow the link below to assist:
http://forums.sun.com/thread.jspa?threadID=5334751
Thanks!

Hi shane,
>
I had a quick look at the above, I noted the following:
Sep 26 12:26:53 ms1 Cluster.PMF.pmfd: [ID 887656 daemon.notice] Process: tag="msg-rg,msg-rs,1.svc", cmd="/bin/sh -c /opt/sun/
comms/messaging64/bin/start-msg watcher", Failed to stay up.
Are there any error messages in the watcher/default log files to indicate whether/why there was a problem?
Following is the output in the default log:
[26/Sep/2008:12:25:41 +0800] ms1 stored[2498]: Store Warning: stored: Sun Java(tm) System Messaging Server STORE 7.0-0.04 64b
it (built Jun 20 2008) starting up
[26/Sep/2008:12:25:43 +0800] ms1 impurge[2499]: General Notice: impurge started
[26/Sep/2008:12:25:47 +0800] ms1 imsched[2502]: General Notice: starting up
[26/Sep/2008:12:26:53 +0800] ms1 imsched[2502]: General Notice: shutting down
[26/Sep/2008:12:26:53 +0800] ms1 impurge[2499]: General Notice: impurge finished
[26/Sep/2008:12:26:55 +0800] ms1 stored[2498]: Store Warning: stored: Sun Java(tm) System Messaging Server STORE 7.0-0.04 64b
it (built Jun 20 2008) shutting down
[26/Sep/2008:12:31:04 +0800] ms2 stored[2245]: Store Warning: stored: Sun Java(tm) System Messaging Server STORE 7.0-0.04 64b
it (built Jun 20 2008) starting up
[26/Sep/2008:12:31:07 +0800] ms2 impurge[2246]: General Notice: impurge started
[26/Sep/2008:12:31:12 +0800] ms2 imsched[2249]: General Notice: starting up
[26/Sep/2008:12:32:17 +0800] ms2 imsched[2249]: General Notice: shutting down
[26/Sep/2008:12:32:17 +0800] ms2 impurge[2246]: General Notice: impurge finished
[26/Sep/2008:12:32:20 +0800] ms2 stored[2245]: Store Warning: stored: Sun Java(tm) System Messaging Server STORE 7.0-0.04 64b
it (built Jun 20 2008) shutting down
[26/Sep/2008:12:36:20 +0800] ms2 stored[2393]: Store Warning: stored: Sun Java(tm) System Messaging Server STORE 7.0-0.04 64b
it (built Jun 20 2008) starting up
[26/Sep/2008:12:36:22 +0800] ms2 impurge[2394]: General Notice: impurge started
[26/Sep/2008:12:36:27 +0800] ms2 imsched[2397]: General Notice: starting up
[26/Sep/2008:12:37:33 +0800] ms2 imsched[2397]: General Notice: shutting down
[26/Sep/2008:12:37:33 +0800] ms2 impurge[2394]: General Notice: impurge finished
[26/Sep/2008:12:37:35 +0800] ms2 stored[2393]: Store Warning: stored: Sun Java(tm) System Messaging Server STORE 7.0-0.04 64b
it (built Jun 20 2008) shutting down
Following is from watcher log:
watcher process 2488 started at Fri Sep 26 12:25:21 2008
watcher process 2514 started at Fri Sep 26 12:26:56 2008
watcher process 2235 started at Fri Sep 26 12:30:43 2008
watcher process 2261 started at Fri Sep 26 12:32:20 2008
watcher process 2383 started at Fri Sep 26 12:35:59 2008
watcher process 2410 started at Fri Sep 26 12:37:35 2008
Are you able to start the instance outside of cluster control?
ms2@root# /opt/sun/comms/messaging64/sbin/start-msg
Warning: a HA configuration is detected on your system,
use the HA start command to properly start the messaging server.

Problem Upgrading ims 5.2 to Sun Messaging Server 6 2005Q4

I've an ims 5.2 running on an existing Solaris box, arnold. I'm planning to upgrade it to 6.2 on a new box, zion.
I've hit the following error when executing do_the_upgrade.sh.
Please enlighten me what it means.
[zi0n]# sh /var/tmp/UpgradeMsg5toMsg6.ScratchDir/do_the_upgrade.sh
admindomain = ou=portnet.com
encryption.nscertfile = alias/msg-arnold-1-cert7.db
encryption.nskeyfile = alias/msg-arnold-1-key3.db
encryption.nsssl3ciphers = rsa_3des_sha, rsa_rc4_128_md5, rsa_des_sha, tls_rsa_export1024_with_rc4_56_sha, tls_rsa_export1024_with_des_cbc_sha, rsa_rc2_40_md5, rsa_rc4_40_md5
encryption.rsa.nsssltoken = internal (software)
gen.accounturl = http://%[email protected]:2390/bin/user/admin/bin/enduser
gen.folderurl = http://%[email protected]:2390/bin/user/admin/bin/mailacl.cgi?folder=%M
gen.installedlanguages = en
local.ugldapdeforgdn = l=sgsin, o=portnet.com
local.webmail.da.host = arnold.portnet.com.sg
local.webmail.sso.singlesignoff = 0
nsserversecurity = on
service.http.enable = yes
service.http.enablesslport = yes
service.http.port = 80
service.http.sslusessl = yes
service.imap.enable = yes
service.imap.enablesslport = yes
service.imap.sslusessl = yes
service.pop.enable = yes
service.pop.sslusessl = yes
service.readtimeout = 10
Importing to local configfile...
Initializing LDAP connection...
Importing to LDAP...
[07/Jul/2006:00:04:02 +0800] zi0n [20061]: General Error: func=configmsg_setkeys; func=psetSetAttrList; error=Attribute does not exist

Thanks for the explanation.
I've managed to resolve this issue after realising
i've missed out a very critical step. Copying of the
physical mailboxes over to the new server.Yes, that's an important step....
>
I've however hit another issue with the activation of
SSL encryption on the v6.2 messaging server.
the current setup is as follows:
1) Applications installed locally:
- Sun Messaging v6.2 server
- Sun Directory Server 5.2 2005Q4 ( For config store
of messaging server)
- Administration Server 2005Q4
User/groups store is located at a existing Iplanet
v5.2 Directory Server.
3) Service account for Messaging Server v6.2:
uid=mail gid=mail
4) Service account for local directory and admin
server: root
Problem faced:
- I've used the cert wizard from the admin console to
generate a cert request and to install the cert
generated from the CA.
- I've also added the CA cert of the CA that has
generated my server cert.
- Next, i've tried enabled SSL encryption, specifying
the use of my newly added server cert. I've save the
settings before exiting from the admin console.
- However, when i login to the admin console to check
the settings again. SSL encryption is now unchecked.
- I've also facing problem stopping and starting
services using the admin console. Especially after
specifying the SSL ports to use for the imap, pop and
http services.
- When i was finally able to restart the services,
the system did not listen on the specified SSL ports.
It seems that my 'Enable SSL' setting also resets
whenever i exit from the admin console.
Greatly appreciate any help on this. Thanks in
advance.I suggest using configutil instead of the Console.
./configutil -o <setting to be changed> -v <new value>
Console is old and pretty flaky. It's going away in the next version.

Messaging server Installation packages

Hi,
We are going to install the following Commsuite 7 ( 7 update 1 ) package which was downloaded freely on May 2010.
ci-7.0-0.02-SunOS_sparc.zip
At the moment after Sun---> Oracle change the "Oracle Communications Unified Communication Suite 7 update 1" is not free and give only the
1 month trial version free.
Appreciate your advice on how I should proceed with one of my corporate customer with a enterprise level messaging server deployment.
Thanks and Best Regards.

I'm not sure what you question is, but you might want to look at this previous answer:
Licensing

No Sun application server installes

I've installed java sun studio creator but because of i've to use a proxy to go in internet, installation program didn't install the application server. Someone knows flags or parameter that i've to use to indicate to the installation program the proxy and his port

What is the platform that you're trying to install on? Also, have you gotten a chance to visit this FAQ page:
http://sonntag.red.iplanet.com/prodtech/javatools/jscreator/reference/faqs/index.jsp
If you have and still have trouble getting further. Can you post your $InstallDIr/install.log? and $installDir/system/install.properties?

Sun Messaging Server - Filter based on Message Type

Hi,
Can I do the filtering based on the message type like Voice mail, text mail.. ?
and also can I filter the messages based on the user?

sunstore wrote:
I am looking at filtering more so at the IMAP Level. I would like to only provide certain messages to clients using IMAP using Server Side filters based on message headers. There are no apis/interfaces to "filter" IMAP operations.
Please let me know if this possible. Also i would like to restrict IMAP access to certain users only. Is that possible ? You can restrict IMAP access by using the mailAllowedServiceAccess: attribute:
http://docs.sun.com/app/docs/doc/819-4437/6n6jckqu5?a=view
Regards,
Shane.

Help: Sun Messaging Server 7u2-7.02 Channel Filter

Hi,
I already tried several different configurations but I can't have a channel filter working.
The following configuration should work...
I added "filter file:IMTA_TABLE:test.filter" to the end of the ims-ms line on imta.cnf
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D filter file:IMTA_TABLE:test.filterand the test.filter has:
require ["editheader"];
addheader "MyHeader" "TEST";The imsimta test output is:
/opt/sun/comms/messaging64/sbin/imsimta test -rewrite -filter [email protected]
address channel        = l
forward channel        = l
channel description    =
channel caption        =
channel user filter    =
dest channel filter    =
source channel filter =
channel flags #0       = BIDIRECTIONAL MULTIPLE IMMNONURGENT NOSERVICEALL
channel flags #1       = NOSMTP DEFAULT
channel flags #2       = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3       = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4       = EIGHTBIT HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5       = TRUNCATESMTPLONGLINES
channel flags #6       = LOCALUSER REPORTNOTARY
channel flags #7       = NOSWITCHCHANNEL DATEFOUR DAYOFWEEK
channel flags #8       = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9       = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALSYSTEM NOTURN
defaulthost            = example.com example.com
linelength             = 1023
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = vmmgssrv.idw
channel after params    =
channel user name      =
urgentnotices          = 1 2 4 7
normalnotices          = 1 2 4 7
nonurgentnotices       = 1 2 4 7
local behavior flags   = %x7
expandchannel          =
notificationchannel    =
dispositionchannel     =
saslswitchchannel      =
tlsswitchchannel       =
backward channel       = l
unique identifier      = [email protected]
header forward address = [email protected] (route (vmmgssrv.idw,vmmgssrv.idw)) (host example.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (vmmgssrv.idw,vmmgssrv.idw)) (host example.com)
envelope rev address   = [email protected] (route (vmmgssrv.idw,vmmgssrv.idw)) (host example.com)
name                   =
mbox                   = admin
Extracted address action list:
    [email protected]
Extracted 733 address action list:
    [email protected]
Address list expansion:
admin@ims-ms-daemon
1 expansion total.
Expanded address:
[email protected]
Submitted address list:
ims-ms
    admin@ims-ms-daemon (orig [email protected], inter [email protected], host ims-ms-daemon) *NOTIFY-FAILURES* *NOTIFY-DELAYS*
      Filter: <user> name file:IMTA_TABLE:test.filter [addr admin@ims-ms-daemon] [owner admin@ims-ms-daemon] (28) [0x00543940] )0x00543090( {0x00540060}
        addheader;0 2 1 "MyHeader" 1 "TEST"
Submitted notifications list:But when I send a message to the user, the message never gets the the header.
Thanks in advance,
Ibraima

Ibraima wrote:
I added "filter file:IMTA_TABLE:test.filter" to the end of the ims-ms line on imta.cnf
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D filter file:IMTA_TABLE:test.filter
Did you run "./imsimta cnbuild;./imsimta restart" after making the change above?
But when I send a message to the user, the message never gets the the header.Please add "LOG_FILTER=1" to your option.dat file, run "./imsimta cnbuild;./imsimta restart", send a user another email and provide the matching mail.log_current entries.
Regards,
Shane.

Sun Messaging Server JES3

Hi Folks,
Just wanna check with you guys on the mailbox quota.
I know that it can be set per user basis like below
mailQuota: 2000000 -> 2MB
Is it possible to set per domain basis say 5MB. So all users will have only 5MB set for mailbox account on that particular domain.
Any help would greatly be appreciated. Thanks a million.

I think you can do this when you create users, but not after the fact.
Done with the class of service thing.

Sun messaging server 7 installation

Similar Messages

Maybe you are looking for