Sun Ray - How to get external USB Card Reader working

Dear All,
i have the following problem. Maybe someone could help me or give me a clue to solve it.
SunRay Software 5 installed
Window 2003 R2 TerminalServer
Here my question:
I use a kiosk session with a smart card to conncet to the windows server - works perfect.
Login Screen and go.
Now i have to have to authenticate myself with an external usb card reader and smart
card (connected to the sun ray) to use a certain application on my win2003 server.
Via the windows rdp session (from the laptops) everthing is ok. The information from
the card reader is transferred to the server.
If i use the Sun Ray nothing happens. So here is my problem:
How do get the authentication information from the smart card to the server?
Thanks in advance
Best regards
Hans-Peter

Basically, reinstall the Boot Camp video drivers manually and if that doesn't work then go to the AMD/Radeon website and install the Windows drivers directly for your video card model.
If you want to do a search you will find others that have pretty good luck doing it either way.

Similar Messages

  • How to get micro sd card to work

    how to get micro sd card to work.. my phone says total space 7.40GB for sSD card and that's whats available. I put a micro SD card in but no change?

    You put the card in and go to settings and go to storage and scroll down to sd card and click mount ad card

  • How to get input from card reader

    hi, everyone,
    I have a project, which needs me to get input from card reader. My terminal input is IBM POS system, but it didnot provide the API to get the input. How can I get the input? Need your help so much! and thanks a lot

    Now this is a wild idea.... how about searching the IBM site for technical information ?

  • How to get a USB-Serial connector working

    I have a laptop with only USB ports, I'm trying to get a USB Serial connector working. I can't find a good guide on how to do it, I can figure out that i need to enable some sort of kernel options, but I'm not sure about how to go about doing it. Can someone hold my hand and tell me what I need to do to get it working?
    Thanks

    It depends on what kind of USB->Serial you have. Some common ones are:
    cp2101
    ftdi_sio
    pl2303
    And those kernel modules are all included with Arch (along with lots more).
    I'd start by just plugging it in and running dmesg to see if your kernel/udev detected it. If you see something about ttyUSB0 then you got it. Just open that device as you would open a normal serial port.
    If it doesn't report anything, run lsusb and see what kind of chip it has.
    If it does report it, I would use minicom to interact with it.
    (Run "minicom -s" as root and set the device to /dev/ttyUSB0, baud to 9600 (or whatever) 8N1. Turn off Hardware and Software flow control. Finally go into Modem and Dialing and delete the init line (unless you are actually dialing)).

  • USB Card Reader Works with Bios 1.70

    Just to report that I upgraded to Bios 1.70 and reconnected by USB Card Reader and I rebooted the computer a few times with NO bios hang-ups! Your milage may vary, but I'm happy to see MSI fix this big issue with me!  

    ...hmmm...same here, maybe 95% of the time...nevertheless, much improved...  

  • USB Card reader works on MacBook Pro but not Mac Pro

    I have a random "All-in-1" card reader from Quantaray. I'm trying to mount my CF card because it takes forever and a day to import HD video directly from my Canon 5D Mk II.
    It works on my MacBook Pro (Mid 2010). Both computers are running 10.6.8. All I have to do is plug it in and it appears on the desktop on my Macbook. But not on my Mac Pro.
    I've already tried resetting the PRAM and SMC. No dice
    It shows up in the System Profiler under the USB High Speed port as a usb card reader but I can't find it anywhere; not even in Disk Utility.
    Any ideas?
    Thanks

    jaypie77,
    First, you must identify the application that created the file. If it truly was Macromedia Flash, fine. Once you know which app created the file, make certain that the same application exists on the Mac Pro. If it does, set the file to open in that application: Open a Getinfo window for the file, then use the "Open With..." dialogue to choose Macromedia Flash (or the correct application) to open the file.
    Scott

  • External USB Card Reader

    I have a multi card reader USB. When I put in a card the LED on the reader lights up, but fdisk -l shows nothing.
    If I put in a MicroSD to SD USB Adapter/Converter (Basically direct usb) its able to see the card.. not sure whats going on here..
    Thanks
    - Sashi

    Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

  • How to get wireless usb adapter linksys working to get on internet?

    Hi, does anybody know any general way to get my linksys wireless g usb adapter to work on Solaris 10? I plug it in and nothing happens. This is a question
    Edited by: Usulyre on Nov 4, 2007 9:56 PM

    A general option would be to search the HCL on bigadmin.com and buy/swap/barter for a supported adapter.
    Another option is to switch to OpenSolaris and search the aforementioned opensolaris community for supported hardware and then buy/swap/barter for supported hardware.
    alan

  • How to get dual graphics card to work together?

    I have an L series satellite with dual graphics card that wont work together. Its an AMD Radeon 3400m apu with an HD 6520G integrated , and a 6400m discrete graphcs card.
    The 6400m will never turn on, I have used amd system monitor to see if it is ever used, but it never is.
    Even when the 6520g is at full load it wont turn on.
    Any suggestions would be helpful.
    Thanks.

    Hi
    As far as I know this theme has been already discussed here in the forum and the switch between internal and external ATI GPU is not supported.
    Just the Optimus technology designed by nVidia is supported
    So you can switch between Intel GPU and nVidia (if both would support the Optimus technology)

  • USB card reader working, but not showing up in removable media... why?

    For some reason lately, my USB mounts, but doesn't show up in the Finder left-hand area with the other removable media, such as DVDs. I have to access it via My Computer, where it does show up. And I have to eject it in Disk Utility.
    It does show up normally in iPhoto.
    Any idea why this might happen?
    Thanks,
    doug

    Welcome! ...I would try Apple's 'Troubleshooting Assistant' first : )
    http://www.apple.com/support/ipod/five_rs/

  • Mobilemate usb card reader adapter worked well in Macbk pro. suddenly stopped showing up as a device in finder-it is listed as a device in utilities- how do I get it to show up again?

    Can anyone tell me how to get my mobilemate sandisk usb card reader adapter to show up in the finder as a device? Card is good and the adapter was working fine until my boyfriend tried to get it to work in a photo frame. When I plugged it back into my mac bk pro it is not recognized in the finder.
    It does show up in the utilities as a usb device.
    Does not show up as it had before in Image Capture or Iphoto.
    LIke I said it was working in this computer no problem. light is on as if it is reading. card is not locked.
    thanks!

    I reformated the disk with an applecare rep this morning. it did not correct the problem.
    the card works fine when I insert it directly.
    Just trying to find out why the adapter no longer shows up in the finder when it did previously- yesterday.
    This is a usb device. Device shows up in system profiler.
    Message was edited by: lizfromwestlake village

  • I modified the first business card in a template. Does anyone know how to get the other cards on the template to look like the first one without doing each individually? please and thanks!

    I modified the first business card in a template. Does anyone know how to get the other cards on the template to look like the first one without doing each individually? please and thanks!

    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
    Peter

  • When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it.  Any ideas on how to get the system to read the iPad?

    When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it.  The iPhoto window opens up and reads the photos on the iPad, so it is connecting to the computer.  Earlier today I wasn't having any problems.  I have shut down the iPad and the computer and started over, but that didn't help.  Any ideas on how to get the system to read the iPad so I can update the apps on it?

    Hi, is the problem just to update your apps on your iPad? Here is what you should check. Is the iTunes on your computer updated to the latest version? Does your iPad needs to be updated? Do you have enough storage on your iPad to do the update? On your device is your iCloud back up checked?
    Go to Settings - iCloud - Backup/Storage - see if its checked, and try unchecking it before connecting it to the computer.
    Please let me know if you need any further assistance.

  • How to get  Network Interface Cards information ?

    hi all,
    how to get Network Interface Cards information and tcp window size by java ?

    807262 wrote:
    how to get Network Interface Cards information Have a look at [url http://download.oracle.com/javase/6/docs/api/java/net/NetworkInterface.html#getNetworkInterfaces%28%29]NetworkInterface.getNetworkInterfaces()
    tcp window sizeWhich one?
    SO_RCVBUF ^[url http://download.oracle.com/javase/6/docs/api/java/net/Socket.html#getReceiveBufferSize%28%29]Socket.getReceiveBufferSize()^
    SO_SNDBUF ^[url http://download.oracle.com/javase/6/docs/api/java/net/Socket.html#getSendBufferSize%28%29]Socket.getSendBufferSize()^

  • How to get a usb device to show up on macbook pro 13inch retina display late 2013 model. os mavericks

    how to get a usb device to show up on macbook pro 13inch retina display late 2013 model? os mavericks

    Check with your telephone carrier or Android:
    https://www.android.com/filetransfer/
    Ciao.

Maybe you are looking for

  • How to use different xsl's for user first time logon in OAM

    Hi, We have a requirement to use different stylesheets (xsls) for employees and customers in OAM. How we can configure different XSLs for user first time logon to OAM (i.e for change password and configuring challenge and responses). Any pointers on

  • OS 8.1 safari very slow offer upgrade.

    After upgrading my iPad Air, Safari seems very slow. While surfing the web, pages are slow loading. Pages with pictures keep trying to play catchup as I'm going down the page. I downloaded another browser and I don't have the same problem with that o

  • Cheque issue for RTGS & NEFT payments

    Hi Experts, NEFT & RTGS outgoing payments from certain banks of Code 1000 such as Citi  bank need to have a a self drawn cheque for the total outgoing payment or individual cheques for each of the payment line items how i have to map Please guide. Th

  • Problem in Using Utl_Http package

    Hi to all, I'm trying to send the sms(Short Message Service) using utl_Http package. When I'm trying to run a sql statement like SELECT utl_http.request('http://www.oracle.com/index.html') FROM dual I'm getting an error message like this. The followi

  • Does FCP support 1080i open GOP HDV files?

    Hello........ A FCP pre-purchase customer question: Will FCP support 1080i open GOP HDV for seamless editing ? My capturing device requires it. My previous NLE has frame errors/stutters that occur when placing two or more .m2t or .mov clips side by s