SUNWsprox package with solaris 10 for Oracle 10g Installation....
Hi
I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
Thanks
Mohammed Tanvir
Hi...
I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
Roger
Similar Messages
-
Problem using associative arrays in vb6 with ORAOLEDB for Oracle 10g
The following vb6-code works fine with MS OLEDB (in MDAC 2.8) but not with Oracles OLEDB for 10g. Any suggestions for making it work?
'vb6-code:
Set rs = New ADODB.Recordset
Set rs.ActiveConnection = oConn 'oConn is already initiaded - code not included here.
rs.Source = "{call PCK_PW_RF_PERSON.P_PW_BIRTHDAY('BURSDAG','2008','01',{resultset 200000, PARAM1,PARAM2,PARAM3})}"
rs.LockType = vntLockType
rs.CursorLocation = adUseClient
rs.CursorType = vntCursorType
rs.Open
Databaseobjects involved:
PACKAGE "PCK_PW_RF_PERSON" IS
TYPE tpv_param1 IS TABLE OF VARCHAR2 INDEX BY BINARY_INTEGER;
TYPE tpv_param2 IS TABLE OF VARCHAR2 INDEX BY BINARY_INTEGER;
TYPE tpv_param3 IS TABLE OF VARCHAR2 INDEX BY BINARY_INTEGER;
PROCEDURE P_PW_BIRTHDAY
pv_i_sreportid IN VARCHAR2,
pv_i_year IN VARCHAR2,
pv_i_month IN VARCHAR2,
PARAM1 OUT tpv_param1,
PARAM2 OUT tpv_param2,
PARAM3 OUT tpv_param2
IS
CURSOR X IS select '1' AS PARAM1,'2' AS PARAM2,'3' AS PARAM3 FROM DUAL;
i NUMBER DEFAULT 1;
BEGIN
FOR c IN X LOOP
PARAM1(i) := c.PARAM1;
PARAM2(i) := c.PARAM2;
PARAM3(i) := c.PARAM3;
i := i + 1;
END LOOP;
END P_PW_BURSDAG;I receive this error:
"ORA-06550: line 1, column 111:
PLS-00201: identifier 'PARAM1' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored" -
Suggestions for Oracle 10g Installation using VMware in Windows XP.
Hi All,
I am using Intel(R) Core (TM) 2 Duo CPU P8600 @2.4 Ghz with 1.98 GB RAM with Windows XP with 70 GB disk space. I would like to install a 2 node RAC with ASM and if possible also configure a DG for learning and testing purpose.Please advice if this will work using a VMware . Is RAC VM possible only Linux or with Windows as well ?
I think 11g is out of scope since i don't have sufficient memory.
I am new to VMware and have not done any installations or used it till now.
It would be appreciated if you could help with these doubts.
1. How much memory can be allocated to each instances?If i am installing Linux how much memory is required ?
2. what will be the load on the CPU and will i be able to use it without any resource crunch ?
3.Once memory is allocated to VM, can it be claimed back , is it like if i am not starting the VMware services.. i have the full 2 GB in discretion?
4. Can 10g Standard editions be used for learning purposes?
If the above hardware is not sufficient, please suggest a suitable configuration
Hari
Edited by: Hari2012 on May 27, 2012 12:24 AMYou do not have sufficient hardware - you will likely need 6GB of RAM or more, plus 100G of disk or more and a multiprocessor machine. Each VM will need at least 2GB of RAM, and once all of the VMs/RAC are installed, the system will be pretty busy running 3 OS's (host and two guests) and two databases. If you do not start up the VMs, all of the memory is available for the host to use. 10g is no longer available for download, you will have to use 11g - yes SE edition is sufficient for learning purposes.
Re: Oracle RAC Desktop Setup
HTH
Srini -
"In-Memory Database Cache" option for Oracle 10g Enterprise Edition
Hi,
In one of our applications, we are using TimesTen 5.1.24 and Oracle 9i
databases (platform - Solaris 9i).
TimesTen holds application information which needs to be accessed quickly
and Oracle 9i is a master application database.
Now we are looking at an option of migrating from Oracle 9i to Oracle 10g
database. While exploring about Oracle 10g features, came to know about
"In-Memory Database Cache" option for Oracle Enterprise Edition. This made
me to think about using Oracle 10g Enterprise Edition with "In-Memory
Database Cache" option for our application.
Following are the advantages that I could visualize by adopting the
above-mentioned approach:
1. Data reconciliation between Oracle and TimesTen is not required (i.e.
data can be maintained only in Oracle tables and for caching "In-Memory
Database Cache" can be used)
2. Data maintenance is easy and gives one view access to data
I have following queries regarding the above-mentioned solution:
1. What is the difference between "TimesTen In-Memory Database" and
"In-Memory Database Cache" in terms of features and licensing model?
2. Is "In-Memory Database Cache" option integrated with Oracle 10g
installable or a separate installable (i.e. TimesTen installable with only
cache feature)?
3. Is "In-Memory Database Cache" option same as that of "TimesTen Cache
Connect to Oracle" option in TimesTen In-Memory Database?
4. After integrating "In-Memory Database Cache" option with Oracle 10g, data
access will happen only through Oracle sqlplus or OCI calls. Am I right here
in making this statement?
5. Is it possible to cache the result set of a join query in "In-Memory
Database Cache"?
In "Options and Packs" chapter in Oracle documentation
(http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/options.htm
#CIHJJBGA), I encountered the following statement:
"For the purposes of licensing Oracle In-Memory Database Cache, only the
processors on which the TimesTen In-Memory Database component of the
In-Memory Database Cache software is installed and/or running are counted
for the purpose of determining the number of licenses required."
We have servers with the following configuration. Is there a way to get the
count of processors on which the Cache software could be installed and/or
running? Please assist.
Production box with 12 core 2 duo processors (24 cores)
Pre-production box with 8 core 2 duo processors (16 cores)
Development and test box with 2 single chip processors
Development and test box with 4 single chip processors
Development and test box with 6 single chip processors
Thanks & Regards,
VijayHi Vijay,
regarding your questions:
1. What is the difference between "TimesTen In-Memory Database" and
"In-Memory Database Cache" in terms of features and licensing model?
==> Product has just been renamed and integrated better with the Oracle database - Times-Ten == In-Memory-Cache-Database
2. Is "In-Memory Database Cache" option integrated with Oracle 10g
installable or a separate installable (i.e. TimesTen installable with only
cache feature)?
==> Seperate Installation
3. Is "In-Memory Database Cache" option same as that of "TimesTen Cache
Connect to Oracle" option in TimesTen In-Memory Database?
==> Please have a look here: http://www.oracle.com/technology/products/timesten/quickstart/cc_qs_index.html
This explains the differences.
4. After integrating "In-Memory Database Cache" option with Oracle 10g, data
access will happen only through Oracle sqlplus or OCI calls. Am I right here
in making this statement?
==> Please see above mentioned papers
5. Is it possible to cache the result set of a join query in "In-Memory
Database Cache"?
==> Again ... ;-)
Kind regards
Mike -
Oracle 10g Installation Problem on SUSE Linux 10
Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root 0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda10 2104376 73112 2031264 4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. ShroffHi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM -
Oracle 10g installation on aix 52
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/crsctl.bin because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/clscfg because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Failed to initialize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated.Would like to see the http://download-west.oracle.com/docs/cd/B19306_01/relnotes.102/b19074/toc.htm#CJAFJGIC or for linux, see http://www.puschitz.com/InstallingOracle10g.shtml.
Its trustworthy sites and my request is to delete all the files and start clean-installation again.
Revert back if any clarifications required.
Regards,
Star Nirav
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program
/dbms/oracle/10g/OraHome/bin/crsctl.bin because of
the following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
Cannot load program
/dbms/oracle/10g/OraHome/bin/clscfg because of the
following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
lize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated. -
Errors using DBMS_SQLTUNE Advisors for Oracle 10g
I get errors trying to tune the below query for Oracle 10g using the DBMS_SQLTUNE advisors.
It happens when I wrap either a large block of PL/SQL code that uses bind variables or multiple nested subqueries with multiple JOIN conditions in a SELECT query statement that I wish to tune using the 10g SQLTUNE advisors.
Message was edited by:
benprusinskiHi, I was trying to use the DBMS_SQLTUNE package to tune my sql statements used in the huge procedure. I can successfully create a task and execute it. But when I run report tuning task, I'm always getting error like the one in below example. Two questions I have now.
1) Is this becuase I'm using bind, but not passing any values?
2) Can I able to use to this package to tune a procedures instead of sql statement?
Example output...
SQL> SELECT DBMS_SQLTUNE.REPORT_TUNING_TASK( 'my_sql_tuning_task3')
2 FROM DUAL;
DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK3')
GENERAL INFORMATION SECTION
Tuning Task Name : my_sql_tuning_task3
Tuning Task Owner : SCOTT
Scope : COMPREHENSIVE
Time Limit(seconds) : 3000
Completion Status : COMPLETED
Started at : 02/26/2009 21:44:41
Completed at : 02/26/2009 21:44:41
Number of Errors : 1
DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK3')
Schema Name: KPRAVEEN
SQL ID : 479831s42xj1n
SQL Text : SELECT a.pdrorn, a.pdrcto, a.pdrlln FROM f4311 a
WHERE a.pddoco = receiptsrcrec.prdoco AND a.pddcto = :2 AND
a.pdkcoo = :3 AND a.pdsfxo = :4 AND a.pdlnid = :5
ERRORS SECTION
SQL> -
Selective export failing - Solaris Sparc - Oracle 10g
HI Gurus,
I am trying to export selective data from one of my prod database tables. But not succeeding. I was keep on trying for the past 2 hours.
Could anybody please verify the script and let me know what was wrong in it. Thanks in advance
OS : SOLARIS SPARC
ORACLE - 10G
Query --> WHERE E3RECV_DT LIKE '201305%' (I need to export this query data)
Below Script i am using
===============
exp E3USER@SGEBAPU2 statistics=none consistent=n buffer=100000000 file=exp_pipe_file TABLES=IFDATA query=\"WHERE E3RECV_DT LIKE '201305\%'\" log=PGTB_IFDATA_conditional.logNagaraju P wrote:
HI Gurus,
I am trying to export selective data from one of my prod database tables. But not succeeding. I was keep on trying for the past 2 hours.
Could anybody please verify the script and let me know what was wrong in it. Thanks in advance
OS : SOLARIS SPARC
ORACLE - 10G
Query --> WHERE E3RECV_DT LIKE '201305%' (I need to export this query data)
Below Script i am using
===============
exp E3USER@SGEBAPU2 statistics=none consistent=n buffer=100000000 file=exp_pipe_file TABLES=IFDATA query=\"WHERE E3RECV_DT LIKE '201305\%'\" log=PGTB_IFDATA_conditional.logconsider placing everything on Control file to avoid fighting with the command line interpreter.
my car is not succeeding.
Tell me how to make my car go.
use COPY & PASTE so we can see what you do & exactly how Oracle responds.
How do I ask a question on the forums?
SQL and PL/SQL FAQ -
Problem Pro*C for Oracle 10g
Hello,
I am compiling pro*c code for Oracle 10g, it is successfully compiling for Oracle 9i. But with Oracle 10g libs it's giving problems.
This following error msg I m getting while compiling
/application/Build/code/booking/>mk test
*.cpp: No such file or directory
make_depend
`/opt/oracle/10.2.0/lib/libclntsh.so' is up to date.
cat: cannot open *.u
proc ireclen=132 lines=yes iname=pcutils.pc oname=~pcutils.c
Pro*C/C++: Release 10.2.0.2.0 - Production on Sat May 26 07:39:59 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
System default option values taken from: /opt/oracle/10.2.0/precomp/admin/pcscfg.cfg
cc -c -DBA_SUN -xCC -I. -I/application/Build/include -I/application/2.6Build/include -I/opt/ba/include - -I/opt/tux80/include ~pcutils.c
"pcutils.pc", line 58: undefined struct/union member: sqlerrm
"pcutils.pc", line 58: undefined struct/union member: sqlerrmc
"pcutils.pc", line 58: warning: left operand of "." must be struct/union object
"pcutils.pc", line 79: undefined struct/union member: sqlerrm
"pcutils.pc", line 79: undefined struct/union member: sqlerrmc
"pcutils.pc", line 79: warning: left operand of "." must be struct/union object
cc: acomp failed for ~pcutils.c
*** Error code 2
make: Fatal error: Command failed for target `pcutils.o'
Could you please suggest me, what should I do in order to build it.
InpreetTo answer my own question, I'd say it's necessary to install the tarball, NOT the Debian files, for the Enterprise edition (perhaps to Standard is enough?).
After installation at (for example) /usr/local/oracle, the "proc" precompiler should be at /usr/local/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/bin
The env.variable ORACLE_HOME should be set,
export ORACLE_HOME=/usr/local/oracle/u01/app/oracle/oracle/product/10.2.0/db_1 -
Pro*C for Oracle 10g in Debian Linux
Hi,
I've downloaded and installed the Debian packages for Oracle 10g XE, and I'm trying to compile a local copy of CASTOR http://www.cern.ch/castor
This software requires the Pro*C compiler. Where can I find/download it from?
Thanks in advance!To answer my own question, I'd say it's necessary to install the tarball, NOT the Debian files, for the Enterprise edition (perhaps to Standard is enough?).
After installation at (for example) /usr/local/oracle, the "proc" precompiler should be at /usr/local/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/bin
The env.variable ORACLE_HOME should be set,
export ORACLE_HOME=/usr/local/oracle/u01/app/oracle/oracle/product/10.2.0/db_1 -
OracleAS 10g installation (please Help)
Hi All
i want a help in[b] OracleAS 10g installation
in the first step in it's installation . must install oracleAS infrastracture . in my way to install it many Errors & messages appears to me
this Errors & messages in 4 pictures to see it .. hope to find a solution for this
th pictures in this links
1- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5413
2- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5414
3- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5415
4- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5416
after pressing ignor in the forth screen many errors & messages appears to meOracle AS10g = 10.1.2.0.2 I presume...
However, my first questions is still valid "The questions is if you followed EVERY step outlined in the Application Server Installation Guide? If you did, then there should be no errors."
I have had similar issues when environment variables was still set during installations, ORACLE_HOME etc. You must unset those, as described in the Installation Guide, before starting an installations.
Please check these two Metalink Notes:
295446.1 "OracleCSService service may fail to start during the install of IAS 10.1.2 on Windows"
365046.1 "The Infrastructure DBCA Stops with Error "Failed to initialize OCR"
Regards,
Martin -
Oracle 10g installation without xwindows
hi gurus,
is it possible to install oracle 10g on solaris 10 without xwindows?
thanks in advance,
newbieHi user570138!
Yes it is possible. You have to use a response file for oracle universal installer to do a silent installation. Look here for more info:
Link:[http://www.informit.com/articles/article.aspx?p=174771]
And here:
Link:[http://download.oracle.com/docs/html/B10130_02/advance.htm]
Hope that helps!
yours sincerely -
Error while creating datasource userdsn for oracle 10g Errorcode (998)
while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon
Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="OracleDS"
location="jdbc/OracleCoreDS"
xa-location="jdbc/xa/OracleXADS"
ejb-location="jdbc/OracleDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott"
password="->pwForScott"
url="jdbc:oracle:thin:@localhost:1521:oracle"
inactivity-timeout="30"
/>
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam -
Long-term retention backup strategy for Oracle 10g
Hello,
I need design a Archivelog, Level 0 and Level 1 long-term retention backup strategy for Oracle 10g, It must be based in Rman with tapes.
¿Somebody could tell me what it's the best option to configure long-term retention backups in Oracle?, "CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1825 DAYS;" It's posibble ?
Regards and thanks in advanceHello;
RECOVERY WINDOW is an integer so yes its possible. Does it make sense?
Later My bad, this is Oracle 11 only ( the gavinsoorma link ) . Getting harder and harder to think about 10. Don't think I would use RECOVERY WINDOW.
I would let the tape backup system handle the retention of your rman backups.
Using crosscheck and delete expired commands you can keep the catalog current with the available backups on tape.
Oracle 10
Keeping a Long-Term Backup: Example
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmbackp.htm#i1006840
http://web.njit.edu/info/oracle/DOC/backup.102/b14191/advmaint005.htm
Oracle 11
If you want to keep 5 years worth of backups I might just use KEEP specific date using the UNTIL TIME clause :
keep until time 'sysdate+1825'More info :
RMAN KEEP FOREVER, KEEP UNTIL TIME and FORCE commands
http://gavinsoorma.com/2010/04/rman-keep-forever-keep-until-time-and-force-commands/
Best Regards
mseberg
Edited by: mseberg on Dec 4, 2012 7:20 AM -
Where can I find Documentation for Oracle financial installation
Hi
Where can I find Documentation for Oracle financial
installation as which all modules to be downloaded for linuk server etc
here is what I have found
===================================
Oracle9i Application Server, Version 1.0.2.2.2 CD Pack for Linux x86 [Act as Server][to be installed on main linux server]
===================================
Oracle® Applications 11i Release 9 CD Pack for Linux x86 [Act as client][to be installed on client sean,AJ,Vinod]
===================================
Internet Developer Suite (1.0.2.4.1) CD Pack (with iAS Pack) for Microsoft Windows (32-bit)
===================================user11872870 wrote:
Hi Tubby,
http://www.quest.com/documents/list.aspx?SearchOff=true&ContentTypeID=20&prod=1
This link has many pdf files but none has the useful information. Those pdf's are just 2 or 3 pages each.Sad Christmas for you then i suppose.
Perhaps you could contact the vendor (quest) and get them to help you in your search for whatever it is you're looking for. An Oracle SQL and PL/SQL forum is not the venue for this, please mark the question as answered, and good luck in your search.
Maybe you are looking for
-
PROBLEM with iMessage (Messages) on iPod touch HELPPP
We had a problem with iMessage. We're both using iPod touch with iOS5 version. but we can't send messages. It says our emails/apple ids are not registered on iMessage. I checked it on already on the Settings>iMessage> ON . but still we cant use it. H
-
My airport network is closed, invisible, and uses WPA Personal security. Normally, when I boot up/login, keychain took care of logging me in automatically into the network. This past weekend, however, my keychain died. I have had to delete my past ke
-
How to limit the creation of Contract in reference to a PR?
hi to all, my scenario is as follows: i create service activity in cj20n. the Purch Requisition # that is generated is made into a quantity contract (ME31K). however i noticed that i can create many contracts for that item. what i want is to be abl
-
"Itunes failed to start B/c MSVCR80.dll was not found."
ANyone got any help with this issue on my Laptop? Worked fine yesterday and today I keep getting this pop up. I've deleted and downloaded itunes again (twice) and clicked the repair button with no luck. Help!
-
Default insertion for missing elements using DBMS_XMLSave.insertXML
Hi, I am trying to insert default values for some columns, without having those column names as elements in the xml document. Is it possible to do so?? This is the code I am using for now, but it inserts null values for missing elements in the xml do