Superdrive eats install disc!

My friend bought a brand new, sealed Macbook Pro 2.16 Intel Core 2 Duo yesterday. He went to reinstall the OS and put the virgin Install disc into the virgin machine. The disc appeared on the desktop and displayed all the appropriate options. He chose reinstall, the superdrive sounded wrong, spun for ages, Macbook Pro locked on grey boot screen. He had to eject by re-booting and holding down the track pad button. When he got the disc out, he found that it had a terminal 360 degree scratch, apparently caused by superdrive.
Now the superdrive sounds like an Apache going down in flames and the install disc is destroyed.
In a twist of utter bad luck, he can't find his receipt and doesn't know how to use the warranty without it.
Any help, much appreciated!
G4 1.25 dual, Powerbook 1.67, Macbook Pro 2.16 Core duo 2 Mac OS X (10.4.8)

hey,
what answer do you expect when your friend can't find the receipt of a macbook pro bought by him yesterday???
he should go where he bought the mbp - probably the serial number is already registered to him - and they can see the date of purchase. most probably the mbp will be repaired then since it's still under warranty...

Similar Messages

Superdrive will read Tiger Install Disc, but not DVD's

I recently had my hard drive crash, so I installed a new one because I didn't have time to wait. The installation went fine, but now when I try to install Leopard, it won't read any DVD's, so I had to install TIger back on my Macbook. Are there any reasons that when I installed a fresh new hard drive that would make my superdrive need some other update or something, because it won't read DVD's?
Thanks

Are there any reasons that when I installed a fresh new hard drive that would make my superdrive need some other update or something, because it won't read DVD's?
Hello smp450!
No, the new HD only needed to be reformatted for your Mac. Your original grey-label Tiger Install Discs are also DVDs, same as Leopard.
You may have missed the answer you received from Smokerz in your previous thread:
http://discussions.apple.com/message.jspa?messageID=6686146#6686146
Now that you've installed the original Tiger OS onto your new HD, are you able to use the Leopard DVD to upgrade? If so, then there is no longer a problem, right? If there is still a problem, where did you purchase the Leopard DVD?

Macbook won't boot from install discs

I've got a Macbook C2D 2ghz superdrive from early 2007. It came with OS 10.4.8 discs (grey). Recently, the hard drive died (click, click, click). So I had to replace it with another HD, a Hitachi 160gb. I installed the hard drive, inserted the install disc 1, and powered up the system. Holding down the option key I get the grey screen and nothing happens for a long time, then the drive kicks out the install disc.
Being a PC guy primarily, I pulled out a copy of Windows XP and was able to quickly boot off that disc, partition the hard drive (>32gb fat32) and install Windows XP. So I know the hard drive works and I know the superdrive works. Process of elimination causes me to suspect the MacBook install discs (which aren't scratched or damaged).
So why can't I get the macbook to boot off the 10.4.8 install discs that came with it? Why won't the original install discs allow me to boot off of them? Is there a simple little trick that I am missing?
Remember, I had a dead hard drive so I have no backup hard drive with OS X on it. This is not a hard drive swap or a hard drive upgrade, just a pure replacement of a dead drive. I do have several external drives available to me, but none have OS X installed on them.
As for background, I am primarily a WinTel guy. I've been building computers from scratch for the last 20+ years. I also worked as a PC Tech back in the day so I've probably assembled or repaired in excess of a 1000 computers, so I'm very hardware knowledgable. However, I have a PC brain, not a MAC brain. Maybe it is just my PC logic that erroneously assumes that these install discs are bootable in the Mac world. Hopefully that isn't the case.

I figured it out, crappy discs or crappy hardware is the problem. On a hunch, I tried to see if I could clone the Apple install dvd's on one of my PC's. Since I didn't know the format of the install discs, I was unsure that would work. I cloned the install discs using Nero Burning Rom and then tried booting off the cheap Ritek dvdr's.
Guess what? The cheap Riteks work with the Apple superdrive, but Apple's own pressed cd's will not! Either Apple has crappy install media (unlikely given my PC read them fine), or the Superdrive is garbage quality hardware. I'm forgiving for hardware failures, heck I seem to eat hard drives because of my audio editing. However, I've rarely ever used the rom drive on this laptop since I do all my work with external hard drives.
I guess I wouldn't be so mad if it weren't for the Apple smugness in their superiority. It's a nice, small, lightweight laptop that got me through my last year of college (older student) with an absolutely horrid keyboard. I just expected more from the hardware given the 40% premium I paid over a comparable WinTel laptop.

IMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso

iMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso. I select the file and the hit return as in step 8 of the Creating an
iSO image document but the box that should open to select use iso does not open. How should I proceed?

The Mac SuperDrive built into your Mac is the Optical drive.
1. Insert your Windows DVD in Optical drive. Disconnect any external storage.
2. Insert a USB2 Flash drive. This will be used to hold the BC drivers.
3. Start BCA. Check the options to download software and Install Windows. You do not need to download Windows. The BCA will download the BC drivers to the USB.
4. Partition your drive.
5. You can see the Windows installer screens at https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2.

Upgrading eMac 10.2.8 to Panther - Are eMac OS 10.3 install discs prefered?

My original eMac came with the Jaguar 10.2 installed (and included the eMac 10.2 installation discs).
I have since upgraded as far as 10.2.8, but am considering upgrading to 10.3+ (possibly 10.4+ eventually).
Would I still be able to keep the Apple OS 10.2 "Classic" (OS 9.2) installed after doing the upgrade to Panther? Or would installing Panther make the "classic" application not function any more under Panther?
My real question is: would it be better to get may hands on the actual original eMac Panther (10.3+) installer discs .... or will any Panther 10.3+ installer discs be just as effective for upgrading the eMac. I would assume it would be better to obtain the original Panther instalation discs for the eMac (from eBay, etc.)?
Also, would there be any problems finally installing Tiger (10.4+) on an older eMac. I have the 880 mhz (1 gb RAM) eMac version (2002 - 2003), and I am wondering how far I could upgrade this eMac without pushing the limits of it's capabilities?
Any suggestions or comments would be appreciated. Thanks
-David
800 mhz eMac/Superdrive Mac OS X (10.2.x) (2) LaCie External Hard Drives (120 -320), 1 GB RAM

A 800 MHz eMac with 1 GB of RAM will easily run Tiger, and Classic will continue to run. If you're upgrading, since you'll need the retail (black label) disc as roam as already noted, by bother stpping at 10.3.x? Just go direct to 10.4, following the guide in Gulliver - Tiger Upgrade Guide. You'll need about 5 GB free space on the hard drive to do an archive & install update; you can lower that by doing an upgrade install and/or using the installer option to select only the language support you actually need (e.g., if you only use English, you can save about 1 GB but leaving the other languages out, or by running Monolingual if you've already done the upgrade). Note that besides the OS, you'll need to update any third-party disk utilities as well (see Only use Mac OS X 10.4-compatible disk utilities with Mac OS X 10.4 volumes).

DVD Drive not recognized/Reinstall of OS 10.3.9 - No install disc(s)??

I have an iMac G4, single 1.25 GHz currently running 10.3.9. After a recent bout of trying to install additional RAM and the Superdrive failing and needing to be replaced suddenly the new DVD burner I had installed to replace the original Superdrive isn't being recognized by the iMac. It will play DVDs put in it (commercial or previously burned) but it will not allow me to burn new content, either files or through iDVD. The computer guys who installed the new DVD drive tell me some of the system pathways (or similar such language) that recognize the drive have been messed up and the easiest way to go would be to reinstall the overall system.
First, I'm curious if there might be an easier solution to try and get the iMac to re-recognize the new DVD drive for burning. And that's in large part because . . .
Second, I can't seem to find the computer install discs that came with my computer some five years ago. I have the OS 9 disc, which doesn't help me, but the OS X disc is no where to be found.
I've seen some other posts with suggestions on where to find versions of Panther and Tiger to buy. If I have to buy one of those I will, but I'd really just like to be able to restore my system's previous functions.
Thanks for any help you can offer!

missalee:
First Repair Disk Permissions in Applications > Utilities > Disk Utility.
Then try Patchburn
Hope it helps.
cornelius

Mac Pro 2008 won't boot from install disc - black screen

Hello,
I recently purchased a new hard drive to replace the original that came with my Mac Pro 2008. I was able to format the new drive using Disk Utility. I am now at the point where I need to install OS X onto the new drive, but the computer refuses to boot from the disc. The disc is recognized by the computer (I can access the disc and am able to use the BootCamp applications, etc.) but I just get a black screen when trying to boot directly from the disc. The computer boots fine otherwise.
I have tried the following:
I have tried using both the gray install disc that came with the computer and the Snow Leopard Install DVD disc.
I have tried booting using the "C" key and the "option" key but still receive a black screen following the chime (I've held these down for several minutes).
I have tried restarting from either install disc using the Bootcamp Assistant.
I have tried running the installation software to get it to restart from the disc.
I have tried a combination of the drives, i.e. trying to boot from the discs with just the new drive installed, just the original drive installed, and with both in bay1 and 2.
Everything results in the computer starting up, hearing the chime, and then nothing..just black screen. I have the original drive partitioned with BootCamp with OSX Snow Leopard and Windows 7 installed (I don't know that that matters).
I am at a loss as to what to try next. It doesn't seem like the superdrive because it is recognizing the disc, it just won't boot from it.
Any help is appreciated, thank you.

Clone should be a must and easy to do and learn (learn by doing! 2)
6800 would 'qualify' as 5x70 series flashed etc and same rule: 10.6.5
In the past there was 10.4.6, 10.5.6, but not 10.6.6 - even though strong need for such a DVD.
10.6.8 DVD would be excellent
Lion or ML - buy, download, make an installer flash card would be what I would do at this point.
Then keep both - dual boot as you learn and test and see what ML does and waht you had that required Rosetta to support PowerPC. See www.roaringapps.com about that.
With Carbon Coyp Cloner - was share, now commercial, great utility been around since 10.2.2 at least - this time 2003. 10 yrs.
You can clone the system folders, you can even selectively choose. You can skip copy of most of your home account and do that separately to another drive if you want.
Clone Windows with Paragon or WinClone and use Windows 7 or 8 DVD to do a system repair (automatic) or to edit the BCD file. It can and should - and all you do is boot Windows 7 DVD w/ only the one drive present and go at it. Piece of cake. But yes, Windows gets fussy if you change or remove or move. BCD to the rescue. A proper program for cloning like Paragon's "Clone OS" meant for going from disk drives to SSDs, knows that and how to do it.
Back to how to clone etc:
Clone
Disk utility has RESTORE which will also clone your system but not the Lion Recovery partition. Oddly Apple did not 'endorse' making bootable clone of the system which works too but most choose Carbon Copy Cloner - it works more consistently; it allows for smart update of the backup volume. Both can backup to a sparse disk image if desired.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
The DVD is dependent on your hardware. And your hardware changed. The drivers for the 5780 and 6xxx are bundled in the OS and lacking. Minimum build thing.
Put the new drive anywhere you want. Does not matter. Can move it later. Can be drive bay 0-3 or a Firewire external or under the DVD drive.
When you clone pull the old drive and boot from the newly cloned.
After that keep a backup clone around all the time. Takes less than 10 minutes to do a smart update to copy just the changes to keep it current. So you have working copy of the system. I keep Clone "A" that I keep "as was" the system as of last month or whatever (like 10.7.4 before upgrade to 7.5).
Comes easier after doing it once and have all your ducks in a row.

Mac mini refuses to read original or retail install Disc.

Alright here's the full story,
I got my mac mini a little over a year ago. It worked just fine but then one day I put a CD in and it refused to read it or eject it. After a tough battle I eventually bested the beast and got the CD out of there, luckily it was still under warranty and I got it fixed and the drive replaced. Just the other day I decided to try and install a copy of windows xp on my mac mini but it wouldn't let me partition the hard drive. I tried to boot from a disk and see if I could do anything from there but low and behold it can't read the disk, in fact it won't read my retail Snow Leopard disk or the original install disk. To be precise if I put in any install disc the computer will just automatically eject it after a while regardless if it's starting up or already running. I have tried holding down c and option at start up but still get the same result. If anyone has any advice it would be very much appreciated as the warranty is now up and I would very much like to not have to take it in for repairs.

The Superdrives are garbage, always have been. Slow, undependable. I'd recommend an external drive from anyone other than Apple.

Just got a macbook pro, no disc drive. how do I install disc-based software? Do I have to buy an external drive? ARgh.

Just got a macbook pro, no disc drive. how do I install disc-based software? Do I have to buy an external drive? ARgh.

Yes, an external drive will be necessary. You may purchase the Mac superdrive from the online store or one from another manufacturer. All will work.
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
Ciao.

Mac OS X Leopard install disc -- optional developer installs -- help please

Hello. I have a question that I've been looking to have answered for a long time. Within the install disc for Leopard, there is a folder called Developer or something like that, and inside it are the installation packages for Xcode Tools, Web Objects, and Dashcode. I have installed these three packages on my computer (I am a computer programmer -- I have very little experience with Mac programming, but I want to get started with learning). Anyways, in addition to these three installation packages, there is a folder called Packages, and inside this folder are about twenty installation packages, with names like X11, WebObjectsDocumentation, gcc, java, and SDKs and earlier versions of Mac OS X and that kind of thing. My question is -- what are these? Are they separate from the things that the Xcode Tools package installs, or are they all included in that package? If I'm going to be developing on the Mac, are these things I am going to need? Any info in regard to this will be much appreciated. Thanks in advance.

My question is -- what are these?
They are sub-packages. The main XCode installer will install all the components by invoking the individual installers. The packages are separated in case you want to install the individual components (e.g. just install X11 without all the other parts).
As to whether you need them, that's only something you can answer based on what you're trying to do.
There's no harm in installing them even if you don't intend/expect to use them, other than eating a little disk space.

Leopard Install Disc won't restart into installer.

I have a G5 quad core and am trying to install Leopard from my family pack installation disc. My superdrive is malfunctioning and will not accept any discs (spins as though it's loading, clicks and tries again, only to spit the disc back out). I purchased an external DVDRW drive by USB quite a while ago because of this. I put the disc in, I can double click to install, it asks me to restart and on restarting it loads right back to asking me for my password. I have tried holding down "c" on restart and the Install Disc never shows up. I have tried holding down "option" on restart and only my hard drive shows up. I tried to load from another computer that I have assuming to share it's drive, but when holding "option" on restart it doesn't give me an option to pick a network.
I'm Lost, Please Advise! Thanks.

A PPC such as your G5 will not boot from a USB connection. However assuming that the other computer has a FireWire port, you can probably "borrow" its DVD drive to install Leopard, even if the other computer is an Intel. You will need an appropriate FireWire cable that can connect the two computers.
I would try the following:
Shut down the G5. Insert the Leopard DVD into the other computer, and restart the other computer while holding down the T key, booting the other computer into [FireWire Target Disk Mode|http://support.apple.com/kb/HT1661] . Connect it to the G5 and then start the G5 while holding down the Option key. This should boot the G5 into the startup manager, and hopefully you will see the Leopard OS X install DVD as one of the startup choices. Select that, and proceed with the Leopard installation. Be sure you pick the correct "Macintosh HD" (the G5's HD!) for the install.

Leopard Install Disc Won't Mount on PowerMac G4

I'm having problems installing Leopard and am looking for advice. My internal DVD reader won't mount the installation disc - this has been a long-standing issue with my DVD drive: it can read some DVDs but not others. This is only the second time I've had trouble reading an actual Apple-manufactured DVD, though. (The first time, it was iLife - I eventually got around the problem by using a third-party DVD drive to install iLife, and that worked fine.) This time, though, while trying to install Leopard from the external DVD drive, the installation failed halfway through. This happened twice in a row, and I had to go back to my original system discs that came with the computer and reinstall the original system (10.2) in order to get my computer working again.
Now, I have two questions that arise from this. One, is this DVD-reading problem on my internal drive something that can be fixed with a Firmware update or something? I've searched without success. Or does the drive have to be replaced completely?
Second, is the problem with trying to install from the external DVD drive likely to be an issue with the Leopard install disc being a dual layer disc (if it is - I have no idea), and maybe the reason it fails halfway through is because my external DVD drive is only able to read one layer of the DVD? Or am I completely barking up the wrong tree with this one? Is it just a bad idea to try and install from an external DVD drive, full stop?
Colour me baffled! Any advice gratefully received.

I do not know for sure, but as the Leopard install DVD has a capacity of over 7GB it may well be a dual-layer DVD.
Assuming your G4 PowerMac otherwise meets the minimum requirements for Leopard (867 MHz or faster, 512 MB memory, 9GB free space on hard drive, etc.) it is possible there is a flaw in the DVD. When you attempted to install did the installer successfully verify the DVD? You could try using Disk Utility to verify the DVD.
You might consider a new internal DVD drive. I had to replace the optical drive in my G5 when it failed. They are quite reasonably priced here: http://eshop.macsales.com/shop/optical-drives/superdrives/powermac/
Do you have an external FireWire hard drive? Did you attempt to install Leopard on that drive?

Selling my dead iBook's install discs.

hey all,
my iBook G4 recently died and thanx to AppleCare, was replaced with a MacBook. i'd like to sell my old install discs on craig's list for anyone out there who still might need too upgrade to 10.3. Will this be a problem as far as licensing/registration is concerned for anyone who buys it? just wanna make sure before i sell them. Thanx much!
David

Oh! No sorry. I meant the same boat as looking for a
home for a displaced MacBook Pro comboDrive. I got
the optiBay second HDD and now the combodrive needs a
home.
Sorry
I see that you had installed the Optibay drive for you 15" Macbook Pro. I am interested in getting one for mine. I hope you don't mind answering some questions that I have. How do you like it so far? Did you do the installation yourself? If you did, how difficult was it? Did it come with all the tools you need to open the Macbook Pro and install? How much of an impact does it have on the battery life, noise, and heat? Did you get the external superdrive that they offer, and if so, does it work as well or better than the existing drive? Sorry if this is overwhelming, but I really appreciate it if you can answer them. Thank you.
Mac Book Pro 15 C2D Mac OS X (10.4.8)

OS X Install Disc not booting

My eMac 1.42GHz PPC G4 (OS 10.4.10) does no longer regognise my administrator password. I have found out (i think...) that the only way of fixing this issue is by using the OS X Install Disc 1. I have tried this several times but the disc does not seem to boot. I have tried updating the firmware for my superdrive (SONY DVD RW DW-D21A) but it still does not work.
Would anyone be able to guide me in finding a solution as this problem is quite annoying.
Thanks in advance

My eMac 1.42GHz PPC G4 (OS 10.4.10) does no longer regognise my administrator password. I have found out (i think...) that the only way of fixing this issue is by using the OS X Install Disc 1. I have tried this several times but the disc does not seem to boot. I have tried updating the firmware for my superdrive (SONY DVD RW DW-D21A) but it still does not work.
Would anyone be able to guide me in finding a solution as this problem is quite annoying.
Thanks in advance

Extracting iDVD off Tiger Install Disc

I have an iBook without a SuperDrive. Just purchased an external DVD burner. How do I extract iDVD off the install discs since iDVD is not an application on my iBook as yet?
Thanks.

If you're referring to a purchased copy of Tiger then iDVD won't be on it. If iDVD came with your computer you will have to get it off the discs that came with it. Check out Mac OS X Restore DVD: Installing individual third-party software items without erasing and Macintosh Restore DVD: How to install iMovie, iPhoto, or iTunes using Mac OS X Software Install.
OT

Superdrive eats install disc!

Similar Messages

Maybe you are looking for