Supplementary unit for Intrastat

Hi,
Some commodity codes are linked to a supplementary unit of measure because the intrastat intra communitarian  movements (set up with OVE1) have to be reported in a different unit of measure than the base unit of measure.
When setting up a material master, the system will ask for the relationship to the base unit of measure when we try to use a commodity code that is linked to a supplementary unit of measure.
When we try to use these commodity codes when placing a PO for a free form text item (without material code) this screen no longer pops up.
I believe the system used to do this. Can you have a look why it is no longer doing this?
Many thanks

I can confirm that my system does not give any pop-up for the same case.
you should open a message to SAP. I dont have the need, as I dont have non-material POs with a commodity code that requires a suppl unit.

Similar Messages

  • Additional/suplimentary unit of measure for Intrastat

    Hi!
    I am trying to generate the Intrastat declaration.
    I have a problem; i am using an commodity code with suplimentary unit of measure p/st. But I cannot define the unit of measure p/st in SAP because the maximum lenght for unit of measure is three characters.
    There should be a table BNADDM in SAP where suplimentary unit of measure exists. But this table in empty im my system.
    How can I configure unit of measure p/st in SAP in order to add it to commodity code configuration?
    Thanks,
    Marcel

    found in Romania_Intrastat_docuE.doc which is attached to OSS note 1016386 - Intrastat for Romania
    Customizing for the Electronic format
    Please note following customizing related to the conversion of the Supplementary Unit of Measure has been involved.
    The issue: The information about unit measure in SAP is maintained with majuscule (capital letters) and in external system (INS) no (e.g. M3 in SAP and in INS it is m3.)
    The customizing is to setup the correct INS supplementary units of measure. Once you need to convert any UoM supplied with SAP application, fill the external system (INS) Unit of measure via the maintenance view:
    /CEECV/ROLO_UO_V via transaction sm30.

  • Supplementary Units of measure Intrastat

    Hi experts
    My business asks me to upload supplementary Unit of Measures for some of Commodity Codes.
    Most of them are not maintained in our SAP so when I go in the customizing and try to fill it in there I get the message: "Unit NPR is not created in language EN"
    UoM in scope are NPR, NAR, MTK, LTR, KSD, KNS. Othes may come.
    It seems this is UE standard to have the same Suppl.. UoM for all countries.
    Shall I create UoM manully? Do I need to do it seperately for each lunguage? Or Is there some SAP note that delivers UoM required for Intrastat?
    Thanks for advice how to proceed.
    BR
    MG

    Which UoM format is transfered to Intrastat declaration as supplemntary UoM. Is it ISO Code?
    1. Do I need to maintain ISO code first - NAR? Than make following entry in CUNI? :
    Int. meas. unit - NAR
    Comercial - NAR
    Technical - NAR
    ISO Code- NAR
    Than translate.
    2. In case of LTR this is ISO code for L(liters) UoM in my ECC. Is it enough if I put in the customizing for Commodity Codes "L" as suppl. UoM. Will LTR be transferred to Intrastat declaration in that case?
    MG

  • Systemd unit for Glassfish v4 server

    Hi all!
    Im trying to set up sytemd unit for glassfish4 web server but I am ending up in failed satate..
    Here's what I got:
    cat /usr/lib/systemd/system/glassfish.service
    [Unit]
    Description=GlassFish Server
    [Service]
    ExecStart=/home/pian/glassfish4/bin/asadmin start-domain
    ExecStop=/home/pian/glassfish4/bin/asadmin stop-domain
    ExecReload=/home/pian/glassfish4/bin/asadmin restart-domain
    Type=forking
    TimeoutSec=15min
    [Install]
    WantedBy=multi-user.target
    #systemctl status glassfish.service
    * glassfish.service - GlassFish Server
    Loaded: loaded (/usr/lib/systemd/system/glassfish.service; enabled; vendor preset: disabled)
    Active: failed (Result: exit-code) since Sun 2015-03-22 14:54:34 UTC; 10min ago
    Process: 142 ExecStart=/home/pian/glassfish4/bin/asadmin start-domain (code=exited, status=1/FAILURE)
    Mar 22 14:43:32 alarmpi systemd[1]: Starting GlassFish Server...
    Mar 22 14:54:34 alarmpi asadmin[142]: Waiting for domain1 to start ................................................................................................................................................
    Mar 22 14:54:34 alarmpi asadmin[142]: serverNoStart
    Mar 22 14:54:34 alarmpi asadmin[142]: Command start-domain failed.
    Mar 22 14:54:34 alarmpi systemd[1]: glassfish.service: control process exited, code=exited status=1
    Mar 22 14:54:34 alarmpi systemd[1]: Failed to start GlassFish Server.
    Mar 22 14:54:34 alarmpi systemd[1]: Unit glassfish.service entered failed state.
    Mar 22 14:54:34 alarmpi systemd[1]: glassfish.service failed.
    glassfish's log file
    [2015-03-22T15:08:25.078+0000] [] [INFO] [NCLS-GFLAUNCHER-00005] [javax.enterprise.launcher] [tid: _ThreadID=1 _ThreadName=main] [timeMillis: 1427036905078] [levelValue: 800] [[
    JVM invocation command line:
    /usr/lib/jvm/java-8-openjdk/bin/java
    -cp
    /home/pian/glassfish4/glassfish/modules/glassfish.jar
    -XX:+UnlockDiagnosticVMOptions
    -XX:NewRatio=2
    -XX:MaxPermSize=192m
    -Xmx512m
    -client
    -javaagent:/home/pian/glassfish4/glassfish/lib/monitor/flashlight-agent.jar
    -Djavax.xml.accessExternalSchema=all
    -Djavax.net.ssl.trustStore=/home/pian/glassfish4/glassfish/domains/domain1/config/cacerts.jks
    -Djdk.corba.allowOutputStreamSubclass=true
    -Dfelix.fileinstall.dir=/home/pian/glassfish4/glassfish/modules/autostart/
    -Dorg.glassfish.additionalOSGiBundlesToStart=org.apache.felix.shell,org.apache.felix.gogo.runtime,org.apache.felix.gogo.shell,org.apache.felix.gogo.command,org.apache.felix.shell.remote,org.apache.felix.fileinstall
    -Dcom.sun.aas.installRoot=/home/pian/glassfish4/glassfish
    -Dfelix.fileinstall.poll=5000
    -Djava.endorsed.dirs=/home/pian/glassfish4/glassfish/modules/endorsed:/home/pian/glassfish4/glassfish/lib/endorsed
    -Djava.security.policy=/home/pian/glassfish4/glassfish/domains/domain1/config/server.policy
    -Dosgi.shell.telnet.maxconn=1
    -Dfelix.fileinstall.bundles.startTransient=true
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dfelix.fileinstall.log.level=2
    -Djavax.net.ssl.keyStore=/home/pian/glassfish4/glassfish/domains/domain1/config/keystore.jks
    -Djava.security.auth.login.config=/home/pian/glassfish4/glassfish/domains/domain1/config/login.conf
    -Dfelix.fileinstall.disableConfigSave=false
    -Dfelix.fileinstall.bundles.new.start=true
    -Dcom.sun.aas.instanceRoot=/home/pian/glassfish4/glassfish/domains/domain1
    -Dosgi.shell.telnet.port=6666
    -Dgosh.args=--nointeractive
    -Dcom.sun.enterprise.security.httpsOutboundKeyAlias=s1as
    -Dosgi.shell.telnet.ip=127.0.0.1
    -DANTLR_USE_DIRECT_CLASS_LOADING=true
    -Djava.awt.headless=true
    -Dcom.ctc.wstx.returnNullForDefaultNamespace=true
    -Djava.ext.dirs=/usr/lib/jvm/java-8-openjdk/lib/ext:/usr/lib/jvm/java-8-openjdk/jre/lib/ext:/home/pian/glassfish4/glassfish/domains/domain1/lib/ext
    -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
    -Djava.library.path=/home/pian/glassfish4/glassfish/lib:/usr/java/packages/lib/arm:/lib:/usr/lib
    com.sun.enterprise.glassfish.bootstrap.ASMain
    -upgrade
    false
    -domaindir
    /home/pian/glassfish4/glassfish/domains/domain1
    -read-stdin
    true
    -asadmin-args
    --host,,,localhost,,,--port,,,4848,,,--secure=false,,,--terse=false,,,--echo=false,,,--interactive=false,,,start-domain,,,--verbose=false,,,--watchdog=false,,,--debug=false,,,--domaindir,,,/home/pian/glassfish4/glassfish/domains,,,domain1
    -domainname
    domain1
    -instancename
    server
    -type
    DAS
    -verbose
    false
    -asadmin-classpath
    /home/pian/glassfish4/glassfish/lib/client/appserver-cli.jar
    -debug
    false
    -asadmin-classname
    com.sun.enterprise.admin.cli.AdminMain]]
    [2015-03-22T15:10:49.758+0000] [glassfish 4.1] [INFO] [NCLS-LOGGING-00009] [javax.enterprise.logging] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037049758] [levelValue: 800] [[
    Running GlassFish Version: GlassFish Server Open Source Edition 4.1 (build 13)]]
    [2015-03-22T15:10:49.826+0000] [glassfish 4.1] [INFO] [NCLS-LOGGING-00010] [javax.enterprise.logging] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037049826] [levelValue: 800] [[
    Server log file is using Formatter class: com.sun.enterprise.server.logging.ODLLogFormatter]]
    [2015-03-22T15:10:58.384+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01115] [javax.enterprise.system.core.security] [tid: _ThreadID=12 _ThreadName=RunLevelControllerThread-1427037040685] [timeMillis: 1427037058384] [levelValue: 800] [[
    Realm [admin-realm] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created.]]
    [2015-03-22T15:10:58.495+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01115] [javax.enterprise.system.core.security] [tid: _ThreadID=12 _ThreadName=RunLevelControllerThread-1427037040685] [timeMillis: 1427037058495] [levelValue: 800] [[
    Realm [file] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created.]]
    [2015-03-22T15:10:59.986+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01115] [javax.enterprise.system.core.security] [tid: _ThreadID=12 _ThreadName=RunLevelControllerThread-1427037040685] [timeMillis: 1427037059986] [levelValue: 800] [[
    Realm [certificate] of classtype [com.sun.enterprise.security.auth.realm.certificate.CertificateRealm] successfully created.]]
    [2015-03-22T15:11:19.304+0000] [glassfish 4.1] [INFO] [SEC-SVCS-00100] [javax.enterprise.security.services] [tid: _ThreadID=15 _ThreadName=RunLevelControllerThread-1427037041041] [timeMillis: 1427037079304] [levelValue: 800] [[
    Authorization Service has successfully initialized.]]
    [2015-03-22T15:11:34.956+0000] [glassfish 4.1] [INFO] [] [org.glassfish.ha.store.spi.BackingStoreFactoryRegistry] [tid: _ThreadID=15 _ThreadName=RunLevelControllerThread-1427037041041] [timeMillis: 1427037094956] [levelValue: 800] [[
    Registered org.glassfish.ha.store.adapter.cache.ShoalBackingStoreProxy for persistence-type = replicated in BackingStoreFactoryRegistry]]
    [2015-03-22T15:11:35.020+0000] [glassfish 4.1] [INFO] [NCLS-CORE-00087] [javax.enterprise.system.core] [tid: _ThreadID=14 _ThreadName=RunLevelControllerThread-1427037041032] [timeMillis: 1427037095020] [levelValue: 800] [[
    Grizzly Framework 2.3.15 started in: 1,051ms - bound to [/0.0.0.0:8080]]]
    [2015-03-22T15:11:42.794+0000] [glassfish 4.1] [INFO] [NCLS-CORE-00087] [javax.enterprise.system.core] [tid: _ThreadID=14 _ThreadName=RunLevelControllerThread-1427037041032] [timeMillis: 1427037102794] [levelValue: 800] [[
    Grizzly Framework 2.3.15 started in: 60ms - bound to [/0.0.0.0:8181]]]
    [2015-03-22T15:11:49.478+0000] [glassfish 4.1] [INFO] [NCLS-CORE-00087] [javax.enterprise.system.core] [tid: _ThreadID=14 _ThreadName=RunLevelControllerThread-1427037041032] [timeMillis: 1427037109478] [levelValue: 800] [[
    Grizzly Framework 2.3.15 started in: 50ms - bound to [/0.0.0.0:4848]]]
    [2015-03-22T15:11:53.456+0000] [glassfish 4.1] [INFO] [NCLS-CORE-00087] [javax.enterprise.system.core] [tid: _ThreadID=14 _ThreadName=RunLevelControllerThread-1427037041032] [timeMillis: 1427037113456] [levelValue: 800] [[
    Grizzly Framework 2.3.15 started in: 12ms - bound to [/0.0.0.0:3700]]]
    [2015-03-22T15:14:14.999+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037254999] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:15:00.827+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01002] [javax.enterprise.system.core.security] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037300827] [levelValue: 800] [[
    Java security manager is disabled.]]
    [2015-03-22T15:15:00.842+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01010] [javax.enterprise.system.core.security] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037300842] [levelValue: 800] [[
    Entering Security Startup Service.]]
    [2015-03-22T15:15:01.135+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01143] [javax.enterprise.system.core.security] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037301135] [levelValue: 800] [[
    Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.]]
    [2015-03-22T15:15:07.477+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01011] [javax.enterprise.system.core.security] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037307477] [levelValue: 800] [[
    Security Service(s) started successfully.]]
    [2015-03-22T15:15:35.705+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00198] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037335705] [levelValue: 800] [[
    Created HTTP listener http-listener-1 on host/port 0.0.0.0:8080]]
    [2015-03-22T15:15:36.235+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00198] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037336235] [levelValue: 800] [[
    Created HTTP listener http-listener-2 on host/port 0.0.0.0:8181]]
    [2015-03-22T15:15:36.542+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00198] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037336542] [levelValue: 800] [[
    Created HTTP listener admin-listener on host/port 0.0.0.0:4848]]
    [2015-03-22T15:15:37.531+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00200] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037337531] [levelValue: 800] [[
    Created virtual server server]]
    [2015-03-22T15:15:37.794+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00200] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037337794] [levelValue: 800] [[
    Created virtual server __asadmin]]
    [2015-03-22T15:15:47.942+0000] [glassfish 4.1] [INFO] [AS-WEB-CORE-00306] [javax.enterprise.web.core] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037347942] [levelValue: 800] [[
    Setting JAAS app name glassfish-web]]
    [2015-03-22T15:15:47.965+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00201] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037347965] [levelValue: 800] [[
    Virtual server server loaded default web module ]]
    [2015-03-22T15:16:31.619+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037391619] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:16:32.504+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037392504] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:16:32.624+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037392624] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:16:32.740+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037392740] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:16:32.856+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037392856] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:16:32.975+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037392975] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:16:33.092+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037393092] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:16:33.212+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427037040728] [timeMillis: 1427037393212] [levelValue: 800] [[
    visiting unvisited references]]
    when starting Glassfish from terminal with asadmin start-domain I get this:
    $ ./asadmin start-domain
    Waiting for domain1 to start ....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
    serverNoStart
    Command start-domain failed.
    and this gets logged:
    [2015-03-22T15:39:24.132+0000] [] [INFO] [NCLS-GFLAUNCHER-00005] [javax.enterprise.launcher] [tid: _ThreadID=1 _ThreadName=main] [timeMillis: 1427038764132] [levelValue: 800] [[
    JVM invocation command line:
    /usr/lib/jvm/java-8-openjdk/bin/java
    -cp
    /home/pian/glassfish4/glassfish/modules/glassfish.jar
    -XX:+UnlockDiagnosticVMOptions
    -XX:NewRatio=2
    -XX:MaxPermSize=192m
    -Xmx512m
    -client
    -javaagent:/home/pian/glassfish4/glassfish/lib/monitor/flashlight-agent.jar
    -Djavax.xml.accessExternalSchema=all
    -Djavax.net.ssl.trustStore=/home/pian/glassfish4/glassfish/domains/domain1/config/cacerts.jks
    -Djdk.corba.allowOutputStreamSubclass=true
    -Dfelix.fileinstall.dir=/home/pian/glassfish4/glassfish/modules/autostart/
    -Dorg.glassfish.additionalOSGiBundlesToStart=org.apache.felix.shell,org.apache.felix.gogo.runtime,org.apache.felix.gogo.shell,org.apache.felix.gogo.command,org.apache.felix.shell.remote,org.apache.felix.fileinstall
    -Dcom.sun.aas.installRoot=/home/pian/glassfish4/glassfish
    -Dfelix.fileinstall.poll=5000
    -Djava.endorsed.dirs=/home/pian/glassfish4/glassfish/modules/endorsed:/home/pian/glassfish4/glassfish/lib/endorsed
    -Djava.security.policy=/home/pian/glassfish4/glassfish/domains/domain1/config/server.policy
    -Dosgi.shell.telnet.maxconn=1
    -Dfelix.fileinstall.bundles.startTransient=true
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dfelix.fileinstall.log.level=2
    -Djavax.net.ssl.keyStore=/home/pian/glassfish4/glassfish/domains/domain1/config/keystore.jks
    -Djava.security.auth.login.config=/home/pian/glassfish4/glassfish/domains/domain1/config/login.conf
    -Dfelix.fileinstall.disableConfigSave=false
    -Dfelix.fileinstall.bundles.new.start=true
    -Dcom.sun.aas.instanceRoot=/home/pian/glassfish4/glassfish/domains/domain1
    -Dosgi.shell.telnet.port=6666
    -Dgosh.args=--nointeractive
    -Dcom.sun.enterprise.security.httpsOutboundKeyAlias=s1as
    -Dosgi.shell.telnet.ip=127.0.0.1
    -DANTLR_USE_DIRECT_CLASS_LOADING=true
    -Djava.awt.headless=true
    -Dcom.ctc.wstx.returnNullForDefaultNamespace=true
    -Djava.ext.dirs=/usr/lib/jvm/java-8-openjdk/lib/ext:/usr/lib/jvm/java-8-openjdk/jre/lib/ext:/home/pian/glassfish4/glassfish/domains/domain1/lib/ext
    -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
    -Djava.library.path=/home/pian/glassfish4/glassfish/lib:/usr/java/packages/lib/arm:/lib:/usr/lib
    com.sun.enterprise.glassfish.bootstrap.ASMain
    -upgrade
    false
    -domaindir
    /home/pian/glassfish4/glassfish/domains/domain1
    -read-stdin
    true
    -asadmin-args
    --host,,,localhost,,,--port,,,4848,,,--secure=false,,,--terse=false,,,--echo=false,,,--interactive=true,,,start-domain,,,--verbose=false,,,--watchdog=false,,,--debug=false,,,--domaindir,,,/home/pian/glassfish4/glassfish/domains,,,domain1
    -domainname
    domain1
    -instancename
    server
    -type
    DAS
    -verbose
    false
    -asadmin-classpath
    /home/pian/glassfish4/glassfish/lib/client/appserver-cli.jar
    -debug
    false
    -asadmin-classname
    com.sun.enterprise.admin.cli.AdminMain]]
    [2015-03-22T15:41:45.525+0000] [glassfish 4.1] [INFO] [NCLS-LOGGING-00009] [javax.enterprise.logging] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427038905525] [levelValue: 800] [[
    Running GlassFish Version: GlassFish Server Open Source Edition 4.1 (build 13)]]
    [2015-03-22T15:41:45.598+0000] [glassfish 4.1] [INFO] [NCLS-LOGGING-00010] [javax.enterprise.logging] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427038905598] [levelValue: 800] [[
    Server log file is using Formatter class: com.sun.enterprise.server.logging.ODLLogFormatter]]
    [2015-03-22T15:41:54.578+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01115] [javax.enterprise.system.core.security] [tid: _ThreadID=15 _ThreadName=RunLevelControllerThread-1427038896771] [timeMillis: 1427038914578] [levelValue: 800] [[
    Realm [admin-realm] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created.]]
    [2015-03-22T15:41:54.690+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01115] [javax.enterprise.system.core.security] [tid: _ThreadID=15 _ThreadName=RunLevelControllerThread-1427038896771] [timeMillis: 1427038914690] [levelValue: 800] [[
    Realm [file] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created.]]
    [2015-03-22T15:41:56.229+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01115] [javax.enterprise.system.core.security] [tid: _ThreadID=15 _ThreadName=RunLevelControllerThread-1427038896771] [timeMillis: 1427038916229] [levelValue: 800] [[
    Realm [certificate] of classtype [com.sun.enterprise.security.auth.realm.certificate.CertificateRealm] successfully created.]]
    [2015-03-22T15:42:16.455+0000] [glassfish 4.1] [INFO] [SEC-SVCS-00100] [javax.enterprise.security.services] [tid: _ThreadID=12 _ThreadName=RunLevelControllerThread-1427038896420] [timeMillis: 1427038936455] [levelValue: 800] [[
    Authorization Service has successfully initialized.]]
    [2015-03-22T15:42:25.582+0000] [glassfish 4.1] [INFO] [] [org.glassfish.ha.store.spi.BackingStoreFactoryRegistry] [tid: _ThreadID=12 _ThreadName=RunLevelControllerThread-1427038896420] [timeMillis: 1427038945582] [levelValue: 800] [[
    Registered org.glassfish.ha.store.adapter.cache.ShoalBackingStoreProxy for persistence-type = replicated in BackingStoreFactoryRegistry]]
    [2015-03-22T15:42:43.272+0000] [glassfish 4.1] [INFO] [NCLS-CORE-00087] [javax.enterprise.system.core] [tid: _ThreadID=14 _ThreadName=RunLevelControllerThread-1427038896756] [timeMillis: 1427038963272] [levelValue: 800] [[
    Grizzly Framework 2.3.15 started in: 1,079ms - bound to [/0.0.0.0:8080]]]
    [2015-03-22T15:42:49.658+0000] [glassfish 4.1] [INFO] [NCLS-CORE-00087] [javax.enterprise.system.core] [tid: _ThreadID=14 _ThreadName=RunLevelControllerThread-1427038896756] [timeMillis: 1427038969658] [levelValue: 800] [[
    Grizzly Framework 2.3.15 started in: 62ms - bound to [/0.0.0.0:8181]]]
    [2015-03-22T15:42:54.264+0000] [glassfish 4.1] [INFO] [NCLS-CORE-00087] [javax.enterprise.system.core] [tid: _ThreadID=14 _ThreadName=RunLevelControllerThread-1427038896756] [timeMillis: 1427038974264] [levelValue: 800] [[
    Grizzly Framework 2.3.15 started in: 41ms - bound to [/0.0.0.0:4848]]]
    [2015-03-22T15:42:58.446+0000] [glassfish 4.1] [INFO] [NCLS-CORE-00087] [javax.enterprise.system.core] [tid: _ThreadID=14 _ThreadName=RunLevelControllerThread-1427038896756] [timeMillis: 1427038978446] [levelValue: 800] [[
    Grizzly Framework 2.3.15 started in: 12ms - bound to [/0.0.0.0:3700]]]
    [2015-03-22T15:45:23.078+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039123078] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:46:06.032+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01002] [javax.enterprise.system.core.security] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039166032] [levelValue: 800] [[
    Java security manager is disabled.]]
    [2015-03-22T15:46:06.048+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01010] [javax.enterprise.system.core.security] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039166048] [levelValue: 800] [[
    Entering Security Startup Service.]]
    [2015-03-22T15:46:06.359+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01143] [javax.enterprise.system.core.security] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039166359] [levelValue: 800] [[
    Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.]]
    [2015-03-22T15:46:12.625+0000] [glassfish 4.1] [INFO] [NCLS-SECURITY-01011] [javax.enterprise.system.core.security] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039172625] [levelValue: 800] [[
    Security Service(s) started successfully.]]
    [2015-03-22T15:46:40.575+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00198] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039200575] [levelValue: 800] [[
    Created HTTP listener http-listener-1 on host/port 0.0.0.0:8080]]
    [2015-03-22T15:46:41.137+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00198] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039201137] [levelValue: 800] [[
    Created HTTP listener http-listener-2 on host/port 0.0.0.0:8181]]
    [2015-03-22T15:46:41.462+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00198] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039201462] [levelValue: 800] [[
    Created HTTP listener admin-listener on host/port 0.0.0.0:4848]]
    [2015-03-22T15:46:42.503+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00200] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039202503] [levelValue: 800] [[
    Created virtual server server]]
    [2015-03-22T15:46:42.788+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00200] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039202788] [levelValue: 800] [[
    Created virtual server __asadmin]]
    [2015-03-22T15:46:52.796+0000] [glassfish 4.1] [INFO] [AS-WEB-CORE-00306] [javax.enterprise.web.core] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039212796] [levelValue: 800] [[
    Setting JAAS app name glassfish-web]]
    [2015-03-22T15:46:52.815+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00201] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039212815] [levelValue: 800] [[
    Virtual server server loaded default web module ]]
    [2015-03-22T15:47:35.172+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039255172] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:47:36.122+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039256122] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:47:36.245+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039256245] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:47:36.369+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039256369] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:47:36.493+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039256493] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:47:36.619+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039256619] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:47:36.741+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039256741] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:47:36.871+0000] [glassfish 4.1] [INFO] [] [javax.enterprise.system.tools.deployment.common] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039256871] [levelValue: 800] [[
    visiting unvisited references]]
    [2015-03-22T15:49:33.162+0000] [glassfish 4.1] [INFO] [] [org.glassfish.jersey.server.ApplicationHandler] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039373162] [levelValue: 800] [[
    Initiating Jersey application, version Jersey: 2.10.4 2014-08-08 15:09:00...]]
    [2015-03-22T15:50:26.435+0000] [glassfish 4.1] [INFO] [AS-WEB-GLUE-00172] [javax.enterprise.web] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039426435] [levelValue: 800] [[
    Loading application [service] at [/service]]]
    [2015-03-22T15:50:26.502+0000] [glassfish 4.1] [INFO] [NCLS-CORE-00022] [javax.enterprise.system.core] [tid: _ThreadID=13 _ThreadName=RunLevelControllerThread-1427038896461] [timeMillis: 1427039426502] [levelValue: 800] [[
    Loading application service done in 486,416 ms]]
    [2015-03-22T15:50:26.554+0000] [glassfish 4.1] [INFO] [NCLS-CORE-00017] [javax.enterprise.system.core] [tid: _ThreadID=1 _ThreadName=main] [timeMillis: 1427039426554] [levelValue: 800] [[
    GlassFish Server Open Source Edition 4.1 (13) startup time : Felix (127,555ms), startup services(530,277ms), total(657,832ms)]]
    [2015-03-22T15:50:51.956+0000] [glassfish 4.1] [INFO] [NCLS-JMX-00024] [javax.enterprise.system.jmx] [tid: _ThreadID=59 _ThreadName=Thread-19] [timeMillis: 1427039451956] [levelValue: 800] [[
    Creating a SecureRMIServerSocketFactory @ 0.0.0.0 with ssl config = GlassFishConfigBean.org.glassfish.grizzly.config.dom.Ssl]]
    [2015-03-22T15:50:52.232+0000] [glassfish 4.1] [WARNING] [NCLS-JMX-00020] [javax.enterprise.system.jmx] [tid: _ThreadID=59 _ThreadName=Thread-19] [timeMillis: 1427039452232] [levelValue: 900] [[
    All SSL cipher suites disabled for network-listener(s). Using SSL implementation specific defaults]]
    [2015-03-22T15:50:52.223+0000] [glassfish 4.1] [INFO] [] [] [tid: _ThreadID=59 _ThreadName=Thread-8] [timeMillis: 1427039452223] [levelValue: 800] [[
    SSLParams =org.glassfish.admin.mbeanserver.ssl.SSLParams@1a7d45]]
    [2015-03-22T15:50:53.861+0000] [glassfish 4.1] [INFO] [] [] [tid: _ThreadID=59 _ThreadName=Thread-8] [timeMillis: 1427039453861] [levelValue: 800] [[
    SSLParams =org.glassfish.admin.mbeanserver.ssl.SSLParams@1a7d45]]
    [2015-03-22T15:50:53.870+0000] [glassfish 4.1] [WARNING] [NCLS-JMX-00020] [javax.enterprise.system.jmx] [tid: _ThreadID=59 _ThreadName=Thread-19] [timeMillis: 1427039453870] [levelValue: 900] [[
    All SSL cipher suites disabled for network-listener(s). Using SSL implementation specific defaults]]
    right now, glassfish is started, but when accessing deployed application's URL (it's REST web service) I get resource not available.
    after a while sevice get's available and this is appended into the log:
    [2015-03-22T15:51:01.140+0000] [glassfish 4.1] [INFO] [NCLS-JMX-00025] [javax.enterprise.system.jmx] [tid: _ThreadID=59 _ThreadName=Thread-19] [timeMillis: 1427039461140] [levelValue: 800] [[
    SSLServerSocket /0.0.0.0:8686 and [SSL: ServerSocket[addr=/0.0.0.0,localport=8686]] created]]
    [2015-03-22T15:51:08.236+0000] [glassfish 4.1] [INFO] [NCLS-BOOTSTRAP-00027] [javax.enterprise.bootstrap] [tid: _ThreadID=1 _ThreadName=main] [timeMillis: 1427039468236] [levelValue: 800] [[
    Registered com.sun.enterprise.glassfish.bootstrap.osgi.EmbeddedOSGiGlassFishImpl@5a060f as OSGi service registration: org.apache.felix.framework.ServiceRegistrationImpl@ec523c.]]
    [2015-03-22T15:52:03.697+0000] [glassfish 4.1] [INFO] [NCLS-JMX-00005] [javax.enterprise.system.jmx] [tid: _ThreadID=59 _ThreadName=Thread-19] [timeMillis: 1427039523697] [levelValue: 800] [[
    JMXStartupService has started JMXConnector on JMXService URL service:jmx:rmi://alarmpi:8686/jndi/rmi://alarmpi:8686/jmxrmi]]
    [2015-03-22T15:53:19.225+0000] [glassfish 4.1] [INFO] [] [org.hibernate.validator.internal.util.Version] [tid: _ThreadID=25 _ThreadName=http-listener-1(4)] [timeMillis: 1427039599225] [levelValue: 800] [[
    HV000001: Hibernate Validator 5.0.0.Final]]
    [2015-03-22T15:53:30.219+0000] [glassfish 4.1] [INFO] [] [] [tid: _ThreadID=25 _ThreadName=Thread-8] [timeMillis: 1427039610219] [levelValue: 800] [[
    [EL Info]: 2015-03-22 15:53:30.062--ServerSession(32742320)--EclipseLink, version: Eclipse Persistence Services - 2.5.2.v20140319-9ad6abd]]
    [2015-03-22T15:53:34.081+0000] [glassfish 4.1] [INFO] [] [] [tid: _ThreadID=25 _ThreadName=Thread-8] [timeMillis: 1427039614081] [levelValue: 800] [[
    [EL Info]: connection: 2015-03-22 15:53:34.067--ServerSession(32742320)--file:/home/pian/glassfish4/glassfish/domains/domain1/applications/service/WEB-INF/classes/_serviceUnit login successful]]
    So can you, please, help me understand what is happening and what I need to do to correctly start glassfish's domain with deployed application in it via systemd?
    Thank you!
    Last edited by greengold (2015-03-22 16:10:33)

    I suggest you create a dedicated user for your calibre service and not run it as root (User=, Group=). I'm not so sure running that code mess as root.
    Edit: Or if you want the server to run only when your user is logged in, then create it in the systemd user session.
    Last edited by progandy (2015-01-18 23:56:03)

  • Fields for Intrastat in SRM 7.0 Purchase order

    Hi experts,
    we use SRM 7.0 extended scenario and the requirement is to enter data for Intrastat in the SRM PO fields and transfer this to ERP PO to exedute the Intrastat report in ERP.
    What I have to do in detail to see the fields on the screen like ERP PO if we order goods/services from a EU supplier ?
    Kind Regards

    Check this Custom solution for implementing Intrastat in SRM (Extended Classic Scenario). I have implemented this in one of my clients and it works without any issues.
    Import-Export (Intrastat) data in SRM - Supplier Relationship Management - SCN Wiki
    http://wiki.scn.sap.com/wiki/download/attachments/250383577/Custom%20Solution%20for%20INTRASTAT_ERP604_v2.pdf?version=1&…
    Hope this helps.
    Regards
    Venkat

  • Setting currency and measurement unit for a field in an ALV report

    Plz give sample code to set currency and measurement unit for a field in an ALV report

    dear friend
    i am seanding you
    the display form
    if you need select form
    and process form also pls keep in touch.
    if help full rewards are expecting.
    yours
    vivek
    FORM build_field_catalog .
      DATA: w_dthigh(10).
      CLEAR fcat.
      fcat-fieldname = 'VBELN'.
      fcat-outputlen = 10.
      fcat-seltext_s = 'COMMERCIAL INVOICE'.
      fcat-seltext_m = 'Commercial Invoice'.
      fcat-seltext_l = 'COMMERCIAL INVOICE'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'C'.
      fcat-datatype = 'CHAR'.
      fcat-key = 'X'.
      fcat-hotspot = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'EXNUM'.
      fcat-outputlen = 10.
      fcat-seltext_s = 'EXCISE INVOICE'.
      fcat-seltext_m = 'Excise Invoice'.
      fcat-seltext_l = 'EXCISE INVOICE'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'C'.
      fcat-datatype = 'CHAR'.
      fcat-hotspot = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'EXDAT'.
      fcat-outputlen = 10.
      fcat-seltext_s = 'EXCISE DATE'.
      fcat-seltext_m = 'Excise Date'.
      fcat-seltext_l = 'EXCISE DATE'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'D'.
      fcat-datatype = 'DATS'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'NAME1'.
      fcat-outputlen = 30.
      fcat-seltext_s = 'CUSTOMER'.
      fcat-seltext_m = 'Customer'.
      fcat-seltext_l = 'CUSTOMER'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'C'.
      fcat-datatype = 'CHAR'.
      fcat-lowercase = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'ZZPD'.
      fcat-outputlen = 15.
      fcat-seltext_s = 'COUNTRY'.
      fcat-seltext_m = 'COUNTRY'.
      fcat-seltext_l = 'COUNTRY'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'C'.
      fcat-datatype = 'CHAR'.
      fcat-lowercase = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'WERKS'.
      fcat-outputlen = 4.
      fcat-seltext_s = 'PLANT'.
      fcat-seltext_m = 'Plant'.
      fcat-seltext_l = 'PLANT'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'C'.
      fcat-datatype = 'CHAR'.
      fcat-key = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'ARKTX'.
      fcat-outputlen = 40.
      fcat-seltext_s = 'MATERIAL DESCRIPTION'.
      fcat-seltext_m = 'Material Description'.
      fcat-seltext_l = 'MATERIAL DESCRIPTION'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'C'.
      fcat-datatype = 'CHAR'.
      fcat-lowercase = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'FKART'.
      fcat-outputlen = 4.
      fcat-seltext_s = 'Billing type'.
      fcat-seltext_m = 'Billing type'.
      fcat-seltext_l = 'Billing type'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'C'.
      fcat-datatype = 'CHAR'.
      fcat-key = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'INCO1'.
      fcat-outputlen = 5.
      fcat-seltext_s = 'INCO TERMS'.
      fcat-seltext_m = 'INCO TERMS'.
      fcat-seltext_l = 'INCO TERMS'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'C'.
      fcat-datatype = 'CHAR'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'INCO2'.
      fcat-outputlen = 10.
      fcat-seltext_s = 'INCO TERMS DES'.
      fcat-seltext_m = 'INCO TERMS DES'.
      fcat-seltext_l = 'INCO TERMS DES'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'C'.
      fcat-datatype = 'CHAR'.
      APPEND fcat.
    CLEAR fcat.
    fcat-fieldname = 'FKIMG'.
    fcat-outputlen = 14.
    fcat-seltext_s = 'QUANTITY'.
    fcat-seltext_m = 'Quantity'.
    fcat-seltext_l = 'QUANTITY'.
    fcat-ddictxt = 'M'.
    fcat-inttype = 'P'.
    fcat-datatype = 'QUAN'.
    APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'FKLMG'.
      fcat-outputlen = 10.
      fcat-seltext_s = 'QUANTITY'.
      fcat-seltext_m = 'QUANTITY'.
      fcat-seltext_l = 'QUANTITY'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'P'.
      fcat-datatype = 'QUAN'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'MEINS'.
      fcat-outputlen = 5.
      fcat-seltext_s = 'UNIT'.
      fcat-seltext_m = 'UNIT'.
      fcat-seltext_l = 'UNIT'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'C'.
      fcat-datatype = 'CHAR'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'KBETR'.
      fcat-outputlen = 8.
      fcat-seltext_s = 'RATE'.
      fcat-seltext_m = 'Rate'.
      fcat-seltext_l = 'RATE'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'P'.
      fcat-datatype = 'CURR'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'NSR'.
      fcat-outputlen = 8.
      fcat-seltext_s = 'Exmill'.
      fcat-seltext_m = 'Exmill'.
      fcat-seltext_l = 'Exmill'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'P'.
      fcat-datatype = 'CURR'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'KURSK'.
      fcat-outputlen = 8.
      fcat-seltext_s = 'EXCHANGE RATE'.
      fcat-seltext_m = 'Exchange Rate'.
      fcat-seltext_l = 'Exchange Rate'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'P'.
      fcat-datatype = 'CURR'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'WAERK'.
      fcat-outputlen = 5.
      fcat-seltext_s = 'CURRENCY'.
      fcat-seltext_m = 'Currency'.
      fcat-seltext_l = 'CURRENCY'.
      fcat-ddictxt = 'M'.
      fcat-inttype = 'C'.
      fcat-datatype = 'CUKY'.
      APPEND fcat.
      CLEAR fcat.
      fcat-fieldname = 'LCURR1'.
      fcat-outputlen = 14.
      fcat-seltext_s = 'GROSS AMT'.
      fcat-seltext_m = 'Gross Amt'.
      fcat-seltext_l = 'GROSS AMT'.
      fcat-ddictxt = 'L'.
      fcat-inttype = 'P'.
      fcat-datatype = 'CURR'.
    fcat-do_sum = 'X'.
      APPEND fcat.
    ================================= *****************
      fheader-typ = 'H'.
      SELECT SINGLE butxt
        FROM t001
        INTO fheader-info
       WHERE bukrs EQ '1000'.
      APPEND fheader.
      CLEAR fheader.
      fheader-typ = 'H'.
      fheader-info = 'Daily Shipments For Exp'.
      APPEND fheader.
      CLEAR fheader.
    Plant
      SORT s_werks BY low.
      READ TABLE s_werks INDEX 1.
      fheader-typ = 'S'.
      WRITE s_werks-low TO fheader-key.
      SORT s_werks BY high DESCENDING.
      READ TABLE s_werks INDEX 1.
      IF s_werks-high NE space.
        CONCATENATE fheader-key 'TO' s_werks-high INTO fheader-info
                                SEPARATED BY space.
      ELSE.
        WRITE fheader-key TO fheader-info.
      ENDIF.
      CLEAR fheader-key.
      fheader-key = 'PLANT : '.
      APPEND fheader.
      CLEAR fheader.
    Billing Typ
    SORT S_FKART BY LOW.
    READ TABLE S_FKART INDEX 1.
    FHEADER-TYP = 'S'.
    WRITE S_FKART-LOW TO FHEADER-KEY.
    SORT S_FKART BY HIGH DESCENDING.
    READ TABLE S_FKART INDEX 1.
    IF S_FKART-HIGH NE SPACE.
    CONCATENATE FHEADER-KEY 'TO' S_FKART-HIGH INTO FHEADER-INFO
                             SEPARATED BY SPACE.
    ELSE.
       WRITE FHEADER-KEY TO FHEADER-INFO.
    ENDIF.
    CLEAR FHEADER-KEY.
    FHEADER-KEY = 'DOCUMENT TYPE : '.
    APPEND FHEADER.
    CLEAR FHEADER.
    Date...
      fheader-typ = 'S'.
    FHEADER-KEY = S_FKDAT-LOW.
      WRITE s_fkdat-low  TO fheader-key.
      WRITE s_fkdat-high TO w_dthigh.
      CONCATENATE fheader-key 'TO' w_dthigh INTO fheader-info
                              SEPARATED BY space.
      CLEAR fheader-key.
      fheader-key = 'PERIOD : '.
      APPEND fheader.
      CLEAR fheader.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type     = 0
        IMPORTING
          et_events       = fevents[]
        EXCEPTIONS
          list_type_wrong = 1
          OTHERS          = 2.
      READ TABLE fevents WITH KEY name = 'TOP_OF_PAGE'.
      IF sy-subrc = 0.
        fevents-form = 'TOPOFPAGE'.
        MODIFY fevents INDEX sy-tabix.
        CLEAR fevents.
      ENDIF.
      rptname = sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
                        EXPORTING
                          i_callback_program                = rptname
                          it_fieldcat                       = fcat[]
                          i_default                         = 'S'
                          it_events                         = fevents[]
                          i_save                            = 'X'
                         TABLES
                           t_outtab                          = it_output[]
                      EXCEPTIONS
                        PROGRAM_ERROR                     = 1
                        OTHERS                            = 2
    ENDFORM.                    " BUILD_FIELD_CATALOG

  • How to calculate the unit for RATE?

    Hey All,
    I am not sure if there is something standard for this or not.
    I am calculating the 'Rate' by using 'Value/Amount' and 'Quantity' as follows -
    Rate == Value /  Quantity
    I need to calculate the unit for the rate as below -
    Rate unit == Value unit (Currency) /  Quantity unit (Base_uom) 
    (for example -
    if value is 1000 USD and quantity is 10 TO then Rate should come out as 100 USD / TO)
    Could anyone please suggest how to calculate the unit in this case?
    Many Thanks!
    Tanu

    Hi,
    Go through the below link it may give some idea
    http://help.sap.com/saphelp_nw04/Helpdata/EN/19/1d7abc80ca4817a72009998cdeebe0/content.htm
    Regards,
    Marasa.

  • Using 02/03 PowerBook as supplementary display for MacBook Pro (original)

    A friend recently mentioned that i might be able to use my old powerbook as a supplementary display for the newest addition to my Mac family.
    can anyone tell me if this is true and if so, how to do it?
    Also, i signed up to this site before i upgraded and i have tried changing my profile to reflect the upgrade, but when i post, i still have to change the model and OS fields under the message field... Why is this so?

    Wow! this is hectic! thanks for that. but i have a follow up question, i notice it has a limited life for free. how long will the free version last? i am prepareed to pay for it, but as i am a student, cant just yet, i probably need until about December and i'll be right, will it last that long?
    also, about the 'model' and 'OS' fields? can they be updated centrally, or do i have to keep changing it every time i ask/answer a question?

  • How to change Unit for Breakdown Duration in Maintenance order.

    Hello,
    In cuni, somebody created Unit "TST" by mistake, system can not convert it to "second" for calculation automaticlly.
    "TST" make no sence. So if maintain "TST" as Unit for Breakdown Duration in a maintenance order, dump will happen. However there is a maintenance order maintained Unit for Breakdown Duration as "TST" saved by mistake, Dump will happen when I try to access to this order by IW32 to change the Unit for Breakdown Duration. Is there any way to change the Unit for Breakdown Duration"TST" to "H" so that I can access to this order by IW32.
    Thank you.

    Hi,
    You could temporarly adjust the CUNI definition for TST so that it can be converted to seconds. Adjust the notifications to set a valid unit of measure.
    The alternative would be to update the field MAUEH in table QMIH with a valid breakdown unit of measure.
    -Paul

  • Need the right flash unit for Canon Rebel EOS T3i to use as separate fill light.

    Im looking to have a separate flash unit for my Rebel T3i purchased in 2012.    My old Canon speedlight 300EZ was for my old 35mm. film Canon EOS 650 and is somewhat limited.   I have a Phottix Strato II Multi Transmitter and Receiver set but I can't get it to work with the old 300 EZ speedlight.
    Thanks,
    Zeida Cecilia-Mendez

    A Canon 430ex would be a good flash for not a lot of money. So would a Phottix Mitros.
    The best thing would be to have 2 or 3 flashes so you can shoot with a more 3-d professional look, though you'd need an extra receiver or else you can simply buy a pair of Phottix Mitros Plus flashes, which have a transmitter and receiver built in. I have 3 of the Mitros + units and I love them.
    Scott
    Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
    Why do so many people say "fer-tographer"? Do they take "fertographs"?

  • [SOLVED] systemd user unit for lsyncd

    After following the the systemd/User - Basic setup wiki article I have successfully setup user services for systemd.  I've also setup a systemd user "unit" to run lsyncd.  The user unit appears to start successfully based on the unit status shown below.  Only problem is lsyncd isn't running and I'm not seeing any relevant errors or info with journalctl.  If I run the script defined in ExecStart on the command line lsyncd starts as expected.  Any ideas or pointers?
    OUTPUT from "systemctl --user lsyncd.service":
    lsyncd.service - lsyncd
    Loaded: loaded (/home/maseone/.config/systemd/user/lsyncd.service; enabled)
    Active: inactive (dead) since Thu 2014-08-28 18:14:50 PDT; 21min ago
    Process: 630 ExecStart=/home/maseone/.lsyncd/start_lsyncd_simple.sh (code=exited, status=0/SUCCESS)
    Main PID: 630 (code=exited, status=0/SUCCESS)
    Aug 28 18:14:50 archie230x systemd[610]: Starting lsyncd...
    Aug 28 18:14:50 archie230x systemd[610]: Started lsyncd.
    UNIT for lsyncd:
    [Unit]
    Description=lsyncd
    [Service]
    ExecStart=/home/maseone/.lsyncd/start_lsyncd_simple.sh
    [Install]
    WantedBy=default.target
    SCRIPT defined in ExecStart:
    #! /bin/sh
    /bin/lsyncd -log all /home/maseone/.lsyncd/lsyncd.lua
    Last edited by maseone (2014-08-29 04:07:58)

    firecat53 wrote:
    Try changing the service type to forking instead of simple. Or look for an lsycd option that keeps it running in the foreground.
    Scott
    Thanks for the pointer, it worked!  After reading in detail the different types available "forking" does seem the most appropriate type for a daemon written as lsyncd.  I believe using an lsyncd option named "detach" would have worked with the "simple" type but forking seemd more appropriate in my case.
    Also as an update to my original post I have completely removed the use of the shell script and am now calling lsyncd directly in my defined systemd unit.  Also using the %h variable for the home directory now.
    REVISED unit file:
    [Unit]
    Description=lsyncd
    [Service]
    Type=forking
    ExecStart=/bin/lsyncd -log scarce %h/.lsyncd/lsyncd.lua
    [Install]
    WantedBy=default.target

  • Supplementary billing for material dispatched from Depot to Customer

    Dear All,
    My client have a scenario where they had dispatched material to customer while negotiation is going on.
    After price finalization, they will raise a supplementary bill to customer for material which had dispatched from the date from which new price got applied.
    EX.--  New price got finalized on 25.01.2012 but applicable from 01.01.2012.
    Now they will raise supplementary invoice for the material dispatched between 01.01.2012 to 25.01.2012.
    I need process to map this scenario in SAP.
    J1IS is not possible as it is specially created for plants as local number range is hard-coded in J1IS.
    Please revert with valuable solutions.
    Regards,
    Balaji

    Dear Laxmipathi,
    Thanks for your input but the process you had mentioned in the given thread is applicable for the material which is lying at the depot & yet to be dispatched. You can update the excise duties of the materials which are lying at the depot through J1IGA.
    But in my case, material is already dispatched to customer.
    I had tried J1IGA for those materials, but additional BED field is greyed out there.
    I request you to suggest some alternate process or workaround so that I can satisfy the client's requirement of supplementary billing.
    Regards,
    Balaji

  • MO: Operating Unit Non Usable Operating Unit for Multi-Org Conversion

    Hello Hussein
    I enabled multi org in 11i and mo Operating unit values set as Non Usable Operating Unit for Multi-Org Conversion, is ok to set is value or will that cause any responsibility.
    In R12.1.3 I am getting an error like this
    APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option.
    Please advice
    Thanks
    Prince

    user12094010 wrote:
    Hello Hussein
    I enabled multi org in 11i and mo Operating unit values set as Non Usable Operating Unit for Multi-Org Conversion, is ok to set is value or will that cause any responsibility.This might cause issues.
    ORA-20001: APP-FND-2902: Multi-Org Profile Option is Required [ID 399910.1]
    How To Prevent the Profile Option MO: Operating Unit being set to NULL at Site Level? [ID 393560.1]
    In R12.1.3 I am getting an error like this
    APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option.
    Please adviceR12 - Error ORA-20001, APP-FND-02902 Accessing Profile Classes Form With Multi-Org Access Control (MOAC) Enabled [ID 602141.1]
    Unable To Open Customer Account Details, Error :ORA-20001: APP-FND-02902: Multi-Org profile option is required [ID 987165.1]
    Entering to Profile Classes Gets Ora-20001, App-Fnd-02902. Multi Org Profile Option Is Required [ID 465132.1]
    Error 'ORA-20001: APP-FND-02902: Multi-Org Profile Option Is Required' When Open Account Details [ID 1406860.1]
    Some Web Pages Fail To Load After Patch Application [ID 1281328.1]
    You may also search MOS website for APP-FND-02902 and go through the docs.
    Thanks,
    Hussein

  • Changing Operating Unit for Inventory Organization

    We have Inventory Organizations already LIVE in Oracle EBS 12.1.3. These are assigned to an Operating Unit. We need to change operating Unit for an Inventory Org. Is it possible to just assign new Operating Unit for an existing Inventory Org? or do we need to define new Inventory Org and then assign the new Inventory org to the new Operating Unit? Let me know if any one has ever faced this requirement and how was it implemented. Thanks a lot.

    Hi,
    The profile option MFG_ORGANIZATION_ID is used by forms that are inventory organization dependent, for example, View Material Transactions form. It is set by calling the function fnd_org.choose_org. It will open a list of values where you will be able to choose one inventory organization enabled to the responsibility you are currently using.
    By default this profile option cannot be set at any level (site, responsibility, user…). I tried to enable it to be set at responsibility level. However, after having done that, nobody was able to enter Oracle e-Business.
    Do you intend to restrict access to one inventory organization or just define a default inventory organization? If you intend to restrict access, you can use Organization Access (Inv Super User: Setup: Organization: Organization Access). There, you define the inventory organizations that are enable to each one of your responsibilities.
    If you have no lines in that form, all organizations are available to all responsibilities. If you add just one line, access is denied to all responsibilities and organizations not listed. So, be careful in setting this up.
    Regards,
    Ketter Ohnes

  • Different order unit for different plant

    Hi,
    I ahve a material whose base unot of measure is kgs. Its purchase order unit for plant 1000 is Tonnes, and I want to have a different purchase order unit say LBS for plant 1100. Is it possible?
    Please advice.
    Regards,
    Vengal Rao.

    Hi,
    You can maintain different order units for the different plants, since purchase view is at plant level.
    Order unit field is available in the purchase view.
    If required, you can maintain different order unit in the PO/Contracts other then the order unit in the material master record for that material and plant by activating variable order unit in the material master record - purchase view. In this way, you can maintain different order units in the PO for the same material and plant.
    Regrads
    KRK

Maybe you are looking for