Supplier Data Download

Hi All,
I am facing a strange issue. I have forecast in D1 and D2 in Demantra DM. This published to ASCP.
ASCP runs with D1,D2 and M1 organization where M1 is central purchasing. All the demand from D1 and D2 is fulfilled in M1.
Dependent demand from M1 is fulfilled with Purchase Orders to Suppliers.
When I download this data to Demantra RTSOP, I am getting all null records for D1 and D2.
There is not data for M1.
Request your help in investigating this. Is this expected behavior or there is some issue in data download?

Hi,
There would be some issue in the data download. Check workflow status and perform proper analysis.
Regards,
Saidaiah

Similar Messages

  • Virtex6:Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings

    Hello,everyone.
    I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
    I download .bit file to FPGA and succeed.
    When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
    and the process is about 68% it fails.
    The message below the IMapct is as belows:
    done.
    PROGRESS_END - End Operation.
    Elapsed time =      0 sec.
    // *** BATCH CMD : identifyMPM
    // *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
    '1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
    done.
    INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
    but the original bitstream file remains unchanged.
    UserID read from the bitstream file = 0xFFFFFFFF.
    INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
    INFO:iMPACT - Current time: 2014/3/13 8:48:14
    // *** BATCH CMD : Program -p 1
    PROGRESS_START - Starting Operation.
    Maximum TCK operating frequency for this device chain: 66000000.
    Validating chain...
    Boundary-scan chain validated successfully.
    INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C >  120.00C]
    1: Device Temperature: Current Reading:  230.52 C, Max. Reading:  230.52 C
    1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
    1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
    '1': Programming device...
     Match_cycle = NoWait.
    Match cycle: NoWait
     LCK_cycle = NoWait.
    LCK cycle: NoWait
    done.
    INFO:iMPACT:2219 - Status register values:
    INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
    INFO:iMPACT:579 - '1': Completed downloading bit file to device.
    INFO:iMPACT:188 - '1': Programming completed successfully.
     Match_cycle = NoWait.
    Match cycle: NoWait
     LCK_cycle = NoWait.
    LCK cycle: NoWait
    INFO:iMPACT - '1': Checking done pin....done.
    '1': Programmed successfully.
    PROGRESS_END - End Operation.
    Elapsed time =     23 sec.
    Selected part: XCF128X
    // *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
    // *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
    INFO:iMPACT - Current time: 2014/3/13 8:49:32
    // *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
    PROGRESS_START - Starting Operation.
    Maximum TCK operating frequency for this device chain: 66000000.
    Validating chain...
    Boundary-scan chain validated successfully.
    INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C >  120.00C]
    1: Device Temperature: Current Reading:  230.52 C, Max. Reading:  230.52 C
    1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
    1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
    '1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
    INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
    '1': Downloading core...
     Match_cycle = NoWait.
    Match cycle: NoWait
     LCK_cycle = NoWait.
    LCK cycle: NoWait
    done.
    INFO:iMPACT:2219 - Status register values:
    INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
    INFO:iMPACT:2492 - '1': Completed downloading core to device.
    Current cable speed is set to 6.000 Mhz.
    Cable speed is default to 3Mhz or lower for BPI operations.
    Current cable speed is set to 3.000 Mhz.
    Setting Flash Control Pins ...
    Setting Configuration Register ...
    Populating BPI common flash interface ...
    Common Flash Interface Information Query completed successfully.
    INFO:iMPACT - Common Flash Interface Information from Device:
    INFO:iMPACT - Verification string:  51 52 59
    INFO:iMPACT - Manufacturer ID:         49
    INFO:iMPACT - Vendor ID:              01
    INFO:iMPACT - Device Code:            18
    Setting Flash Control Pins ...
    Using x16 mode ...
    Setting Flash Control Pins ...
    Setting Configuration Register ...
    '1': Erasing device...
    '1': Start address = 0x00000000, End address = 0x008CE03B.
    done.
    '1': Erasure completed successfully.
    Setting Flash Control Pins ...
    Using x16 mode ...
    Setting Flash Control Pins ...
    Setting Configuration Register ...
    INFO:iMPACT - Using Word Programming.
    '1': Programming Flash.
    done.
    Setting Flash Control Pins ...
    '1': Flash Programming completed successfully.
    Using x16 mode ...
    Setting Flash Control Pins ...
    Setting Configuration Register ...
    '1': Reading device contents...
    done.
    '1': Verification completed.
    Setting Flash Control Pins ...
    Current cable speed is resumed to 6.000 Mhz.
    '1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
    `Elapsed time =    814 sec.
    and i find many people have met the same thing. But they are spartan  series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
    I have read the status Registers and find there is an over-temperature state 
    and in Impact i could not readback the registers. It is strange.
    I am anxious about this problem and have not solved it yet
    What reasons may it be?
    Hope for your answer, thank you

    Hi~I want to know if you solve the configuration problem for virtex-6?
    As I encounter the  same configuration problem, I want to consult  you with some question.
    Can I have your email?
    gszakacs wrote:
    I have measured the VCCINT and find it is 1.0V, not 2.997V;
    That is not at all surprising.  I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
    my Reference board is ML605
    That would have been nice to know at the beginning...
    It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide.  See table 1-27, table 1-33 and the note below it about switch S1.
    I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA.  Have you tried power-cycling to see if the FPGA boots from the flash?
    I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that).  That will not only show the bits of the configuration status register, but also describe what each bit means.  Among other things you can check the state of the FPGA's configuration logic and the Mode pins.
     

  • Is there a way of showing more info than just the title and author for books in my iPad "library", say date downloaded, or date last read, eg ?

    Sometimes I forget the title of a book I am currently reading, and have to check through each book in my long list of titles in my "library" to find it again. I cant see any way of adding any additional information to each title (and author), like date downloaded, or date last read, which would help me find a particular book again quickly. 
    I may be missing something simple, so can anyone please help?
    Thanks in advance.

    Sometimes I forget the title of a book I am currently reading, and have to check through each book in my long list of titles in my "library" to find it again. I cant see any way of adding any additional information to each title (and author), like date downloaded, or date last read, which would help me find a particular book again quickly. 
    I may be missing something simple, so can anyone please help?
    Thanks in advance.

  • WUC-17 Information was missing from the supplied file download request java

    Dear Forms Guru,
    Can anybody help why i'm receiving this error using webutil.
    WUC-17 Information was missing from the supplied file download request java..
    the result in my jinitiator console are the ff:
    Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/webutil.jar from JAR cache
    Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/jacob.jar from JAR cache
    Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/f90all_jinit.jar from JAR cache
    RegisterWebUtil - Loading WebUtil Version 1.0.5 Production
    Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/toolbar_images.jar from JAR cache
    connectMode=HTTP, native.
    Forms Applet version is : 90290
    2005-Feb-13 01:48:19.514 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
    2005-Feb-13 01:48:33.504 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
    2005-Feb-13 01:48:34.04 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
    Many thanks in advance...
    benjie

    Benjamin,
    WebUtil tries to download the jacob.dll to the client. The error message you get is most likely caused by teh following section in teh webutil.cfg file
    install.syslib.location=/webutil
    ## Do not change the following lines unless instructed to do so
    install.syslib.0.7.1=jacob.dll|94208|1.0|true
    install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
    install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
    ## But you can add your own libraries in here
    #install.syslib.0.user.1=testwebutil.dll|204872|1.0|true
    If you have all these files available on the PC, then most likely the problem can be found in the virtual path setting for this directory
    <virtual-directory virtual-path="/webutil"
    real-path="c:/webutil/lib" />
    in /j2ee/Oracle9iDS/application-deployments/forms/forms90web/orion-web.xml
    Pleae refer to the webutil documentation for teh exact configuration steps.
    Hope this helps
    Frank

  • Validation on Inventory and Supplier Data Stream

    Hi Experts Team,
    My client wants validation on Inventory and Supplier Data Stream.  When I am trying to create method it shows only total record and documents in data stream field.
    How I can get the above two stream in method.
    Can any one suggest me.

    Thanks Dan for your speedy reply
    I will do validation according to documet type
    Thanks & Regards
    Madhu

  • AP 11i Supplier  Data upload similar to ADI

    Hi,
    Is there any way that we can upload supplier data (including site level information) into existing oracle payable 11i using excel sheet or is there any interface or direct table available?
    We have the data on excel, we need to find a way to upload those data without entering it using oracle forms interface. Please let us know.
    Thanks!

    Hi,
    I have tried uploading the supplier data using      the below api
    Internal Name          INSERT_NEW_VENDOR
    Interface          AP_PO_VENDORS_APIS_PKG
    The procedure completed successfully but data did not appear in Po_vendors table.
    can any one help me?
    Regatds,
    Rubayat Newaz

  • Mobile DSD data download issue : "/DSD/ME_DDR_STAT" status on error

    Hello All,
                 DSD Backend scenarios are working fine.  We had sent all the master data and shipment IDOC's to the DSD connector and we see the data in the DSD connector tables. In the Mobile DSD application we are having problems in getting the data downloaded to the Nobile client. we noticed that afer the shipment creation in backend the status on the table "/DSD/ME_DDR_STAT" goes to the following status:
    DATA_STATUS - N
    TRANDAT_STATUS - S
    PRCDAT_STATUS - N
    and when we try to do a sync from the mobile device it says the
    synchronization is completed successfully but the status on the table
    changes to Error as mentioned below:
    DATA_STATUS - E
    TRANDAT_STATUS - S
    PRCDAT_STATUS - E
    We are not sure what is the issue. We had successfully implemented the
    Pricing BADI and also did all the configuration that are related to the
    DSD Pricing .
    We had implemented the OSS note "1287227 - Price date status E
    in /DSD/ME_DDR_STAT set incorrectly". Still the issue exists.
    Any suggestions  why the status is changing to Error and Master data is
    not getting downloaded in to the MI Client.
    We are at SP13 and I am using MI client for SP13 with path level 1 for SP 13.
    Thanks for your help in advance.
    Thanks,
    Greetson

    Dear Greetson,
    This generolly happens if there is some problem in the Pricing Data.
    Please disable all the Sync Bo releated to pricing and again create a tour .....
    check whether u are getting the required result.
    Also check TRX: SLG1
    I will try to update the thread if i could find something more useful for you.
    Regards,
    Akhil...
    Edited by: Akhil Rastogi on Jan 30, 2009 10:31 PM

  • Supplier data quality

    In R12.1.3 -Supplier Hub/Lifecycle Mgt - we have already data quality feature included out of box. Do we need to install enterprise data quality separately in this case for supplier data cleansing?

    Hi,
    As far as I know Supplier Hub has no DQ Dashboarding capability.
    You could purchase Oracle Enterprise Data Quality to do this for supplier hub and any other source of data.
    Regards,
    Mike

  • Supplier data across business groups

    Our business group is currently using only Core HR and there are several contractors/contingent workers in the system. What is the best way to capture the supplier name? Right now, it is captured in some DFF but I want to use the supplier name field in the supplier tab of assignment form. There are other business groups in the same instance for different countries and they are using the purchasing module and have defined suppliers for their use which I am able to see in the list of values for supplier field in my business group.
    I want to suggest our HR folks to start using the supplier field instead of capturing this information in some DFF. Will there be any negative implications of doing this? Is supplier data shared across business groups? If I define suppliers for our business group purposes, will the other business groups be able to see our values?
    Please suggest.
    Thanks
    Jay
    Edited by: Jay on Oct 10, 2012 8:02 AM

    Hi Ranay,
    Approvals using Position Hierarchy can be used across Business Group. But specific to purchasing module not 100% sure.
    Thanks
    AshokP

  • Product Contract and supplier data transfer from SRM to SAP XI

    Dear MDM Guru's
    I want to transfer product data from SRM system to SRM MDM catalog by executing the transaction BBP_CCM_TRANSFER. But not found any materials  or blog or articles on configuration and integration steps between SAP SRM and SAP XI.
    Need a same information on SRMMDM_CTR_TRANSFER - For contract data, Suppliers data.
    Please help.
    Regards
    Jacob

    HI Jacob,
    I believe below documents will give you the information which you are looking.
    [SRM-MDM Catalog Setup - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8]
    [SAP NetWeaver Master Data Management - SRM Catalog: Configuration for SAP NetWeaver Exchange Infrastructure - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/601d4fee-719f-2910-4f86-fa030ab07358]
    [SAP NetWeaver Master Data Management - SRM Catalog: SRM - EBP Configuration|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc]
    Please revert if you still get any question, after going though these documents..
    - Shiv

  • Report data download to excel file

    Hi experts,
       My requirement is report data download to excel file and that file should be an attachment to send email to specified people.
    first i want to to download data to excel file and that file should be an attachment.
    Regards
    V.Venu

    Hi venu,
    Before posting the question, just search for the related query, more number of post has been posted related to your query,
    any ways  check this below links, it will solve your problem.
    <<linkfarm removed>>
    Cheers
    NZAB
    Edited by: kishan P on Jan 10, 2012 4:51 PM

  • Configuration data download to FPGA was not successful.

    I have designed a board with the Spartan 6 LX9 TQFP144 Package.
    I am able to load a bitstream to the device with the digilent HS-2. However the fpga can not selfconfigure from
    the attached SPI Flash.
    Here is the console output from iMPACT:
    GUI --- Auto connect to cable...
    INFO:iMPACT - Digilent Plugin: Plugin Version: 2.4.4
    INFO:iMPACT - Digilent Plugin: found 1 device(s).
    INFO:iMPACT - Digilent Plugin: opening device: "JtagHs2", SN:210249983579
    INFO:iMPACT - Digilent Plugin: User Name: JtagHs2
    INFO:iMPACT - Digilent Plugin: Product Name: Digilent JTAG-HS2
    INFO:iMPACT - Digilent Plugin: Serial Number: 210249983579
    INFO:iMPACT - Digilent Plugin: Product ID: 30900152
    INFO:iMPACT - Digilent Plugin: Firmware Version: 0109
    INFO:iMPACT - Digilent Plugin: JTAG Port Number: 0
    INFO:iMPACT - Digilent Plugin: JTAG Clock Frequency: 10000000 Hz
    Attempting to identify devices in the boundary-scan chain configuration...
    INFO:iMPACT - Current time: 27.07.2015 16:19:26
    PROGRESS_START - Starting Operation.
    Identifying chain contents...'0': : Manufacturer's ID = Xilinx xc6slx9, Version : 2
    INFO:iMPACT:1777 -
    Reading C:/Xilinx/ISE/14.7/ISE_DS/ISE/spartan6/data/xc6slx9.bsd...
    INFO:iMPACT:501 - '1': Added Device xc6slx9 successfully.
    done.
    PROGRESS_END - End Operation.
    Elapsed time =      0 sec.
    Selected part: N25Q128
    Unprotect sectors: FALSE
    INFO:iMPACT - Current time: 27.07.2015 16:20:19
    PROGRESS_START - Starting Operation.
    Maximum TCK operating frequency for this device chain: 25000000.
    Validating chain...
    Boundary-scan chain validated successfully.
    '1': SPI access core not detected. SPI access core will be downloaded to the device to enable operations.
    INFO:iMPACT - Downloading core file C:/Xilinx/ISE/14.7/ISE_DS/ISE/spartan6/data/xc6slx9_spi.cor.
    '1': Downloading core...
     LCK_cycle = NoWait.
    LCK cycle: NoWait
    done.
    '1': Reading status register contents...
    INFO:iMPACT:2219 - Status register values:
    INFO:iMPACT - 0011 1100 1110 1100
    INFO:iMPACT:2492 - '1': Completed downloading core to device.
    '1': IDCODE is '20ba18' (in hex).
    '1': ID Check passed.
     '1': IDCODE is '20ba18' (in hex).
    '1': ID Check passed.
     '1': Erasing Device.
    '1': Using Sector Erase.
    '1': Programming Flash.
    '1': Reading device contents...
    done.
    '1': Verification completed.
    '1':Programming in x4 mode.
    '1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
    INFO:iMPACT - '1': Flash was not programmed successfully.
    PROGRESS_END - End Operation.
    Elapsed time =     78 sec.
    If i read that correctly Data was written to the Flash but the fpga was not able to configure from that data.
    Done-pin is connected to 3.3V via a 470 Ohms Resisor.
    The Flash is a N25Q128A13ESE40G, Datasheet here: http://www.farnell.com/datasheets/1674445.pdf
    I can perform a readback, checksum and an erase.
    If i do a read device status this is the console output:
    INFO:iMPACT - Current time: 27.07.2015 16:36:27
    Maximum TCK operating frequency for this device chain: 25000000.
    Validating chain...
    Boundary-scan chain validated successfully.
    '1': IDCODE is '20ba18' (in hex).
    '1': ID Check passed.
     '1': IDCODE is '20ba18' (in hex).
    '1': ID Check passed.
     '1': IDCODE is '20ba18' (in hex).
    '1': ID Check passed.
     INFO:iMPACT - '1': Reloading FPGA configuration data stored in flash...
    INFO:iMPACT:182 - done.
    On the Flash side I have pulled s# and Hold up to 3.3V with 100k Resistors.
    Can someone help me to find the problem?

    So does the FPGA try to read the SPI flash when it boots ?
    out with scope, probe the clock and the data , see if you can see it streamig out when you boot.
    If so, then one other thing I see wrong a few times is data path of the SPI, single bit or 4 bits of data.
        you have to make certain the bit file was created in the same width as the fgpa is expecting,
          In ISE I think its in Impact where you make the SPI flash file and specify this .
     

  • Supplier data for contractors

    Our business group is currently using only Core HR and there are several contractors/contingent workers in the system. What is the best way to capture the supplier name? Right now, it is captured in some DFF but I want to use the supplier name field in the supplier tab of assignment form. There are other business groups in the same instance for different countries and they are using the purchasing module and have defined suppliers for their use which I am able to see in the list of values for supplier field in my business group.
    I want to suggest our HR folks to start using the supplier field instead of capturing this information in some DFF. Will there be any negative implications of doing this? Is supplier data shared across business groups? If I define suppliers for our business group purposes, will the other business groups be able to see our values?
    Please suggest.
    Thanks
    Jay

    Hi Satish,
    You would typically use BOMBOS to create a product structure that includes the supplier parts.
    Per default BOMBOS would evaluate the procurement indicator and if it is a buy part it would evaluate the Appoved Manufacturer Part Lists (AMPL) or the purchasing info records.
    You should see the supplier/manufacturer parts in the product structure of the Compliance Workbench below the component (= SAP MM). These would be the CDOs you mentioned.
    Yes, in an IMDS scenario you would need to map the IMDS OrgID to the supplier number.
    Best regards,
    Andreas

  • Moving Calendar to a New Computer & Moving Data: Downloads and Add-ons

    Moving Calendar to a New Computer & Moving Data: Downloads and Add-ons
    The handle says is all. Totally lost here & in a virtual house of cards. Please first see screen-shot.
    I have the Mozilla calendar (Lightening?) program on my computer. Is this screen-shot Thunderbird or is it an add-on called Lightening that was added on to Thunderbird? I don't even recall how I acquired in a few years ago. Whatever it is I find in invaluable. Indispensable. Brilliantly conceived. A superb creation.
    Notice that I have several calendars in different colors for different purposes and a long task agenda on the right. Wonderful program!! I absolutely love it! I can not afford to loose these calenders and this data. However, big caveat, entrusting my life (our lives) to it has become extremely dangerous for it's a virtual house of cards upon the purchase of a new computer. The move-over is more like a career most of us already have one. Need anyone really wonder why PC sales are down? Res ipsa loquitur.
    FIRST ISSUE:
    I must move this/these Mozilla program/s and calendars over to the new computer but I don't have a clue where to begin. What must I download? Thunderbird? What must I add-on? Lightening? Is this a suite of programs? All I care about are my calendars and task agendas that you see in the screen-shot -- not any email programs etc. Just this personal management system that you see.
    SECOND ISSUE:
    After I downloading, installing, and adding-on what I need, how do I then move (migrate) my profile (data) over to new computer?
    Please know that I do know where that 'profile' and its .ics calendar profiles are stored. I am also well backed up. I just need to know how get (downloaded/install) what I need and move this over to the new computer. (See screen-shot)
    First, what must I download and install and add on. Second how do I move this data/profile (a virtual Life) over to the new computer without it all coming down like a house of cards?
    Please, unless it's all been documented in one location, a link to this and a link to that probably won't be very helpful. Anyone who can lay-out a simple, easy to follow plan (1, 2, 3, 4, done) will be a hero and make a significant contribution to people who dread buying a new computer for precisely these reasons. It will certainly encourage more people to use this absolutely wonderful personal management system. It's the best I've ever seen and I must keep it. But it's soooo risky.

    Obviously the screen-shot is posted so show what I see now and want to see when I am done. Was the ''really ''not clear? Nothing could be more germane ("Germaine" is a person's name) than a visual that shows the multiple calendar dynamic and what I actually want to see nor better communicants the fact that all I want is that and not other programs in a suite – a question btw asked but not answered.
    "I have no idea what the threshold issue is. Perhaps Zeno can assist you."
    I now see Zeno's reply but I never got an email re: my questions and just noticed it. I will respond to him separately. But ''obviously ''the ''''threshold'''' issue is ISSUE ONE (1) exactly what, and only what, must I download and install.
    Was that really not clear? That was not answered in your first reply. And since you here, later, state that Lightening does not need to be downloaded and installed how on earth could you presume the first threshold issue (question 1) was a joke?
    Once again I wrote and you even quoted me “Please, unless it's ALL been documented in ONE LOCATION, a link to this and a link to that probably won't be very helpful. Anyone who can lay-out a simple, easy to follow plan (1, 2, 3, 4, done) ...”
    As this exchange demonstrates, that statement has certainly proven to be correct.
    You then wrote, “Read the question... the question is. How do I move my profile to a new computer? You are the one making much more of it than that. ... All covered in the link.”
    What “the” (singular) of several links (plural) you provided are you talking abut? But no matter. No it was not "all" covered in the multiple links you sent which do not address the more important threshold question (1). The only issue you addressed was (2) data transfer which is secondary to the threshold issue which is ISSUE question one (1). Threshold issue/question presented: before we can go to question (2) we must address question (1).
    As I stated “Please know that I do know where that 'profile' and its .ics calendar profiles are stored.”
    You replied “No you do not. Local calendars are not stored in ICS files.”
    First please notice you make no attempt to clarify where they are; but, once again, please read carefully. I did not say that the calendars are “stored in the ICS files” but that the .ics files ARE the calendars and I do know there they are stored.
    Please see the screen-shot you claim is not germane? Each of those different colored calendars are (“not stored” in but are) .ics files that are stored in the Profile directory. In the directory c:\Users\myName\AppData\Roaming\Thunderbird is a directory or folder called \Profiles and in that directory is a file named 9w2ydrc4.default. That file IS the profile. In that profile is a folder called “calendar-data” and in that folder are the calender .ics files that are the different colored calenders you see in the very germane screen-shot. So I do know where the calendars are. So I gather that all I copy into the Profiles directory is the file (profile) called 9w2ydrc4.default.
    Again, as I wrote before, I do not want a full suite with email. So what do I downloaded and install to get only what you see in the screen-shot. I don't think we ever installed a full suite before. I never saw and email program. So, again,'' asked but not answered. ''
    Then you stated, I do not need to download and install Lightening (please notice, is a partial answer to my first, threshold, question you presumed was a joke) but only Thunderbird since “Lightning is already in your profile so will move with it When you actually move the profile.”
    Well, since you like to use links, exactly what is your documented Mozilla authority for that hearsay? Since I posted the question I have spent much time at Mozilla. Literally everything I have seen indicates I must first download and Thunderbird. But again, I do not want to and never did, install a full suite of programs and, as far as I know, there is no Mozilla mail or other suite programs on this (my current old computer) and there never were. So, once again'', asked and not answered).''
    Everything at Mozilla states I must first download & install Thunderbird'' and then ''add-on Lightening. Nothing I have seen at Mozilla suggests otherwise or states that when we want to get Mozilla calendars over to a new computer we must first and *only* download and install Thunderbird and then just copy the profile (9w2ydrc4.default) into the 'Profiles' directory. Nothing I have seen at Mozilla suggests I do not have to download and install Lightening. So please show me where Mozilla documents that. ''' Please notice that even Zeno states, “You download AND INSTALL LIGHTNING as an add-on.'''”
    Since this contradicts you do tell me: what is your Mozilla authority for claim that I do not need to download and install Lightening because it's already in my profile? I see nothing in my profile that suggests Lightening is there.
    Finally, I wrote to you “ ...it is axiomatic that Windows transfer wizard does NOT transfer programs but only data. You did not know this?” I only wrote that because it appeared your reference to Transfer Wizard was a response to the threshold question of (1) how to I get the program onto the new machine. But your response is''' very '''strange for you wrote “You are the first person I have encountered that thought it did more than transfer data.” Show me where I said that. I said the opposite. How on earth did you come to that interpretation as a response to my simple and very clear statement that " ...it is axiomatic that Windows transfer wizard does''' NOT transfer programs but only data.'''.”

  • Data download from CRM from standard browser based transactions

    This is, I'm afraid, rather a general question. I'm doing some R&D for a software development company (SAP Partner), and we're looking for a few use cases for where data is downloaded from CRM, specifically from browser based transactions. We're not interested in anything that downloads from ALV - we've got that covered. Our main concern is other download mechanism that might be available in standard CRM functionality.
    If anyone can point to some use cases, involving data download from a browser front end (web dynpro, presumably), that would be very useful.

    Hello Matthieu,
    As far as CRM7.0 is concerned (which is bsp-based) here are a few applications where users can download information from sap to local pc:
    - Take any result list table and hit the "download to excel button".
    - Start the "data import tool" that is available in UTIL_SALES business role, you'll be able to download an Excel file as well
    - Click any link to attached documents to a business object (sales order transaction for example)
    - Etc.
    If you need help to start one of those application just let me know.
    Regards
    Nicolas.

Maybe you are looking for

  • Button on SWF to export it in PDF

    Hello All, We have created XCelsisus dashboard and have published the SWF of this dashboard to InfoView in BO. The Users want that they should be able to execute the SWF and at the same time, they should be able to download a PDF version of this SWF

  • FMB size changes when compiled using ifcmp60 compared to using ifbld60

    We observed that when we batch compiled our forms size of the FMB reduced quite a bit after batch compile and save compared to what it was to originally when compiled and saved through forms builder (ifbld60.EXE). If after this form is opened in form

  • Adobe CS6, Acrobat

    Ich habe regelmäßig einen Absturz bei dr Anwendung von Adobe pro X. Die exe-Datei wird gelöscht oder ist nicht aufzufinden. Hatte Zuletzt eie Support-Sitzung bei der, mir geraten wurde, das Komplette Programm zu löschen und neu zu installieren. Hat f

  • Remove Keyword from Filter dialog box help

    When I imported my iPhoto library of about 5,000 photos Aperture created two keyword filters (visible when I open the FILTER dialog box and select "All Images" under the main Project Library. It created "iPhoto Edited" and "iPhoto Original" keywords.

  • What is i_step =1 or 2 and what is e_t_range used in Cmod for customer exit

    Hi All, What do we go for I_step =1 or 2. And what is e_t_range is it a table or structure ? Can anyone explain me about it. What happens if we use i_step = 1 and 2? Thanks Pooja