Supplier Network Collaboration: ICH-ASN Externally created ASN through SNC

Hi,
Has anyone configured an externally generated ASN (coming from supplier) going to SNC (ICH) and then directly routed the ASN to customer's backend system (ECC5.0)? If so, could you please share the details of configuration? Is SAP Note 944125 the only configurtion needed in SNC?
If I map the incoming supplier's ASN (XML message) to the message DespatchDeliveryNotification (interface: DespatchDeliveryNotification_In), will the above configuration (SAP note) will route the ASN to backend system?
Thanks.

Hi Paul,
When you send to SNC you will use DespatchedDeliveryNotification_in and SNC will validate whether it is valid asn or not(for validation certain steps are there functional consultant should be able to help on this). If yes then it will trigger the xml document. You can use DESADV.DELVRY05 idoc to post to sap.
Please see this help:
http://help.sap.com/saphelp_scm70/helpdata/EN/00/6f36043ed4416491a8dc1ddb322b40/content.htm
http://help.sap.com/saphelp_scm70/helpdata/EN/f0/ccdd9b1b7e4aa681dec9c40e1a2aef/content.htm
Regards,
---Satish

Similar Messages

  • FM for Create ASN programmatically in SNC (Supplier Network Collaboration)

    Hello,
    I am working in SNC (Supplier Network Collaboration) with version SAP SCM 7.0. I wanted to create ASN programmatically.
    Can anyone tell me the ways possible to create ASN programmatically using purchasing information?
    Thanks & Regards,
    Nitin

    HI Jens,
    In our forum, we discussed topic about BizTalk & SAP Integration before, hope it helps you.BizTalk
    & SAP Integration
    Best regards,
    Angie
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Steps: SNC (Supplier Network Collaboration) Integration with ECC through XI

    Hi,
    Has anyone worked on the SNC(Supplier Network Collaboration) integration with SAP ECC via SAP XI.
    Could you pls share any documentation related to this. And also could anybody tell me the setup required to go ahead with the integration.
    Thanks,
    S

    Hi Xavier,
    SNC integration with XI has predefined mappings. So ask your basis guys to download the XI content for SNC using with PI. Once they deployed you will have a builtin predefined content in XI. Within the predefined content mostly they all are xsl mappings.
    If your requirement is with the standard idocs then you can use them directly. Else if their is customization they you may need to change the mappings according to your requirements.
    Also check this help:
    http://help.sap.com/esoa_scm_snc2007/helpdata/en/index.htm
    Regards,
    ---Satish

  • SAP SNC Supplier Network Collaboration integration with SAP ERP via BizTalk - experiences?

    Hello,
    had anybody experience in integration of SAP SNC Supplier Network  Collaboration with SAP ERP via BizTalk Server?
    Versions: SAP ECC 6.0 Ehp5 SPS11, SAP SNC  current version (7.0?)
    We will have to integrate following processes:
    Master Data integration, PO Purchase Order, Forecast, SMI Supplier Managed Inventory
    Usually SAP takes an SAP PI middleware for this, where the full implementation can be downloaded from the SAP marketplace, but we want to avoid having an additional Integration Platform with maintenance etc.
    Are there experiences, success stories, pitfalls, issues to be known, recommendations, known efforts in this forum?
    Thanks in advance.
    Jens

    HI Jens,
    In our forum, we discussed topic about BizTalk & SAP Integration before, hope it helps you.BizTalk
    & SAP Integration
    Best regards,
    Angie
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Supplier Network Collaboration

    Where can I get some useful documents regarding SNC??????
    I want to customize the Alert Monitoring System !!!!!!
    One report which is a webdynpro component needs to be customized.......
    where to write code and all............

    Hi,
    You can have a look on below link....
    http://help.sap.com/saphelp_snc70/helpdata/EN/06/6c63a93fdd3342a88ab965ae164557/frameset.htm
    Regards

  • Supplier Network Collaboration : Implementation pre-Steps

    Hi All,
    I am looking for some important pre-steps/Knowledge , which i need to understand for implementing the SAP SNC at customer end.
    I have got a theoretical knowlege of all the business process in sap SNC and also i have gone thru the SAP SNC Config guide.
    Please suggest!.
    Thanking in Advance.
    Regards,
    Shashi

    Resolved

  • A User facing a issue of "Collaboration Folder is not created"

    Dear All,
    A user facing an issue of collaboration folder is not created even through they have created in the SRM Potal.
    Can anybody put some light on the issue as soon as possible.
    Thanks,
    Pranav

    Hi
    Please refer below URL.
    cFolder settings in SRM
    Thanks
    Karitkeya

  • PO item should not be change in case of change PO if ASN has created

    Hello Experts,
    We have implemented MM-SUS. We are facing a problem, A PO consist of 2 items on different delivery date, Vendor has created a ASN For first item. Now the ASN is pending for 2nd item on require delivery date.
    In between, Purchase change the purchase order and by mistake he has changed the QTY of first item, in change order notification 1st item is also going to supplier.
    We wanted that if ASN has created for any item then even in change PO it should not go to Supplier again so that supplier can not create a ASN again.
    Please help us.
    Thanks
    Aakash.

    Hi,
    There is a field called Completion rule in Item Category.
    A: Item complete after 1st reference
    B: Item complete after full Qty referenced
    In the Item category of Quotation in your case put Completion rule as A. So whenever a Sales Order is created with reference to the Quotation, the Quotation will be complete.
    So even if some-one changes the Quotation later on, it will not be possible to create a sales order by referencing it.
    Hope this helps.

  • Create ASN Shipping nonfiction without SUS in SRM

    Dear expert,
    We work SRM Server 5.5 Extended classic scenario.
    We intend to work with POR Purchase order Response.
    And we also want to use the ASN shipping notification
    Can we use inbound ASN without SUS? 
    For example:
    PO>POR>ASN in SRM server without sus.
    Thanks
    Isiaki

    Hi,
    I understand that ASN is document in ERP that called "Inbound delivery",
    Can we get the ASN response from supplier in ERP? Can we see in the SRM system the ASN (created in the ERP) flow Local PO document that created in SRM?
    Mining, we work extended classic scenario and we want to see the ASN details in the SRM LOCAL PO.
    I also want that the confirmation that came after the ASN will create in the SRM. Is it possible?
    Thanks
    Isiaki

  • Unable to create ASN for PO line item

    Hi,
    I am in the process of implementing SMI replenishment.
    I am able to
    a) Create PO in ECC.
    b) Confirm and Publish the PO in SNC
    When I try to create ASN with reference to Purchase Order, Only the shipping date, delivery date, customer location & ship-from are populated in ASN.  Product number and quantity fields are blank at the line item level.
    Steps I followed:
    Delivery-> Receipts and requirements -> Due list for Purchasing documents
    Select PO line and use "Create ASN". Also, message "Enter product and quantity for item 00001" is displayed.
    I am expecting, PO number, product number, confirmed quantity, delivery date etc to get populated ASN automatically.
    Can somebody tell if this is standard SNC system behavior or am I missing something?
    Best regards
    Vivek
    Message was edited by: Vivek Peelamedu
    Note:
    1. Product/location is extended to supplier
    2. Transportation lane exists

    Hi,
    You should create an incoming message of type DESADV which will create ASN in you system as inbound delivery. Purchase Order confirmation control key should allow such confirmation.
    Best Regards,
    Tomek

  • Material not getting displayed in create asn screen

    Hi All,
    We are not able to see the material under create asn screen in SUS tho the same appears wen we open the PO in SUS.Also,please let me know which function module in sus governs the display of material in create asn screen
    Thanks,
    Manu

    Hi Jeetu,
    can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
    You should adapt your scenario:
    - first do not use the standard attribute derivation during your URules: performance is very bad.
    - implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
    - implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
    Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
    hope this helps...
    Olivier.

  • Error while creating ASN in SNC

    dear all,
    We are tring to create an ASN against a PO in "Due list for purchasing documents" in SNC but getting the following errors, the material is invalid, ship from location is invalid and the customer location is invalid.
    PO created in ECC and received in SNC. The PO acknowledgement was also received back in ECC but not able to post ASN from SNC to ECC.
    Request to please let us know if we have missed out on some master data setting?
    Thanks in advance.
    mahesh.

    Hi Mahesh
    I am also getting the similar type of errors while creating ASN against planned receipts in SNC . I was trying to find for some help & saw this thread.
    Just wondering if you managed to rectify the error & able to post the ASN?  Will appreciate if you can share the resolution with me.
    We are also on SNC 7.02.
    Regards,
    Tapan

  • Product Invalid Error while creating ASN

    Hi
    I am trying to create ASN by navigating from DCM screen but in Create ASN screen shows error as "Product Invalid".
    When I check in Product  field help, pop up does not show this product although product is visible on DCM screen.
    I checked all master data and related settings and all looks good. This error comes only for few parts and not all parts which vendors supplies.
    When I compared the product having issue with those having no issue, then there is no difference as far as master data settings is concerned.
    Does anyone has faced such kind of issue earlier. Plz help.
    Thanks

    Hi Sandhya,
    This issue is due to Visibility Setting for "Create ASN" screen.
    You can overcome this error by doing the below setting:
    SPRO > SNC > Basic Settings >  Visibility > Set Selection Mode of an Application
    For screen ASC (Create ASN), choose use PDNF_NEW and save
    Note: This is explained in SAP Note # 1925363
    Regards,
    Bharath

  • SRM alert configurations for SUS ASN not created in SRM SUS system

    Hi All,
    We are trying to configure the SRM ASN alerts with the alert category SRM_SUS_AVIS ( Alerts for ASN-SUS) by the same way we did for the SRM_BID_INV for bidinvitation in different client and scenario.
    Is the configuration for SUS anyway different than EBP? ( I have posted another thread for bid alert doubt and later it was configured and working fine sometime ago)
    If the config for SUS ASN alert is different then what is that?
    With our configurations in SLAERT and ALRTCATDEF, and thru RSALERTTEST job we are getting alerts for PO not viewed and Order confirmation not created.
    But we are not able to get alerts for ASN  not created.
    Can anyone throw some light on this please?
    Best regards,
    Sridhar

    Vendor data is maintained in table CRMD_PARTNER only when transactional documents exist for the vendor.

  • ASN to create inbound delivery

    Hi expert:
    Usually, vendor send out 1 ASN will create 1 inbound delivery automatically.
    However, I found 1 ASN send from vendor but create 2 inbound delivery.
    what is the reason for this? Thanks
    Best Regards.

    Hi Sridhar:
    How to check IDoc from inbound devivery? could you please guid me?
    Best Regards

Maybe you are looking for

  • Mac mini boot failure - help

    mine is a 1.5g core solo mini with 512 mb ram, last night i had a power failure after which the mini wouldn't boot, i hear the start up chime, it goes to the grey screen and stays there for a while and retarts again.... and its a non stop loop, safe

  • Videos in email have sound but no picture since I updated to Lion

    I recently updated to Lion and now when I open videos in email I have sound but no picture.

  • Issue with Submit button

    Last October, I created a fillabe form via LiveCycle. I distributed the forms and they all worked initially on the receiver's end. The past couple of months, people have been informing me that the "submit" button has disappeared. Why would this happe

  • Dynamic variable failing

    <p>I have some code with a connect by clause.  When I use atext string in the 'start with' part of the statement the codecompiles and runs.  When I use the dynamic variable [$folder]I get a compilation error:  Error and then code is includedbelow.  <

  • How to use the Web Dynpro Component Interface

    Hi, All Error when processing your request What has happened? The URL http://erp2005.besuretech.com:8000/sap/bc/webdynpro/sap/zz_test5/ was not called due to an error. Note The following error text was processed in the system E05 : Error when Creatin