Support for Solaris 8 and 9

I need a method of automatically installing patches from a local patch server ... for security reasons, we have no internet connectivity (absolutely no physical connection).
Sun Patch Manager 2 seemed the perfect solution ... but have just found it is to be eol'd.
Is SUC now working for 8 and 9? And if so what is the equivalent of the "Local Patch Server" functionality available on SPM 2.0?
Many thanks
Andy

Sun Update Connection will be being backported to Sol 8 and 9 to replace SPM but is not yet available.
There is also Update Connection Enterprise Edition (UCE) which will be released shortly which covers Solaris 8-10. This will be a subscription based service and is a rebranding of Aduva's Onstage product following their recent acquisition. For more information on this visit aduva.com or request contact from the following link -
http://www.sun.com/service/sunupdate/aduva.xml

Similar Messages

  • OpenSSH 4.4p1 packages with PAM support for Solaris 9, 10

    As mentioned in a previous post* , I've compiled OpenSSH packages with PAM support for Solaris 9 and 10. They've since been updated to version 4.4p1, and are compiled against a static zlib (1.2.3) and OpenSSL (0.9.8c). You can find them here:
    http://firewallworks.com/downloads/unsupported/Solaris-sparc/
    Regards,
    Greg
    * http://forum.sun.com/jive/thread.jspa?threadID=103378&tstart=105

    Yes, zlib 1.2.3 is a requirement. In facts, zlib mentions a 2005 vulnerability fix but I found no matching patch in sunsolve. See
    http://www.kb.cert.org/vuls/id/JGEI-6E7RC3
    I have been wandering whether to replace the official zlib. Linking statically is probably a better idea. Thanks

  • HBA support for solaris 10

    Hi All
    I need to know which HBA card will support solaris 10.we have sunfire 1280 server, brocade silkworm 12000 and hitachi 9980
    Regards
    RPS

    I would beg to differ on this response. This is not a service call and the storage vendor is not responsible for making decisions on what the customer is allowed or not allowed to use.
    EG, I have a Sun StorEdge 9990 (actually a HDS USP 1100 and not the 9990 Lightning series which is on the web site) and I made the call to put the Fibre Channel HBA's of my choice into my systems and I also chose the Cisco 9509 switches. Both HDS and Cisco put out documentation regarding compatibility of the HBA's.
    So, I would suggest RPS check out the Brocade website or sales people and ask them if they recommend anything.
    http://www.brocade.com/products/pdf/Fabric_Aware_Compatibility_Matrix-060521.pdf
    states that the option X6768A is supported for Solaris 10.
    Sun 9980 will work on most of the HBA's available in the system handbook.
    The could be either the rebadged Qlobic or JNI HBA's. You could even use Emulux if you are that way inclined.
    My systems are full of dual channel HBA's such as SG-XPCI2FC-QF2.
    You should also be aware that the 1280 has only one 66 MHz PCI slot. You can upgrade the I/O boat to all 66 MHz slots if you are after good throughput. The upgrade will also give the opportunity to use the 4 Gb HBA if you can find a system to use them on.
    Stephen

  • When i try to open photoshop this shows up Please uninstall and reinstall the product.  If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.  Error: 16

    i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
    Please uninstall and reinstall the product.
    If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
    Error: 16
    and when i click the uninstall app on the file it tells me this
    The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
    and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
    please help thank you

    Run the cleaner tool and reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Download CS6 products
    Mylenium

  • [svn:fx-trunk] 10876: Add support for drag-and-drop from Spark List to Spark List.

    Revision: 10876
    Author:   [email protected]
    Date:     2009-10-05 15:20:07 -0700 (Mon, 05 Oct 2009)
    Log Message:
    Add support for drag-and-drop from Spark List to Spark List.
    - List drop related handlers
    - LayoutBase APIs
    - VerticalLayout DND support
    Notes:
    - ListSkin is not final.
    - Drag-scrolling not yet implemented.
    QE notes: Only VerticalLayout works, HorizontalLayout still not implemented.
    Doc notes: None
    Bugs: None
    Reviewer: Deepa
    Tests run: checkintests
    Is noteworthy for integration: No
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/List.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/layouts/VerticalLayout.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/layouts/supportClasses/LayoutBase.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ListSkin.mxml
        flex/sdk/trunk/frameworks/spark-manifest.xml
    Added Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/layouts/supportClasses/DropLocation.as

    Whoops, disregard my question - I just read the spec that indicates drag and drop is scheduled for later work.
    David

  • ZAM support for Debian and CentOS

    I'm planning to install Zenworks Asset Management and I would like to know if it would release a support for Debian and CentOS. We have a heterogenous network environment and there are servers that are running Debian and CentOS. Is it possible for ZAM to release a support for these operating systems?

    Vindveif,
    The version of Asset Management (7.5) that this forum covers, runs on
    top of windows only. ZLM (7.3) only supports SLES and RedHat.
    Shaun Pond

  • Feature Request: Support for .idea and .psdx extensions

    I've noticed that Adobe Bridge does not have any support for .idea and .psdx files.  The .idea files will show a idea file icon but the .psdx will be a blank, unknown file icon.  Both do not show any preview in Bridge.  I do not know why this is as previews for these files can be seen when they are uploaded to creative cloud or the new creative cloud mobile app.

    Hi,
    I've logged an enhancement request on this.
    Thanks,
    David

  • Support for AWR and/or SR2???

    Will Aperture soon add support for AWR and/or SR2 files (generated by the Sony DSLR-A100)? What about Photoshop, for that matter?

    No, we have consolidated on the Apache XML/XSL stuff. You are free to use
    whatever other parser you would like however. The Sun XML pkg should work
    fine.
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "Boris Tabenkin" <[email protected]> wrote in message
    news:[email protected]..
    Are you still including the sun XML package, and if so which version?
    "Toby Allsopp" <[email protected]> wrote in message
    news:[email protected]..
    Hi, Craig.
    Craig Macha wrote:
    Our company typically does NOT use Open Source products. We can't
    risk
    not having support.
    I think you're a little confused about what "Open Source" means. Itdoesn't mean "unsupported." If you want support then you need to pay forit,
    just like any software. One of the advantages of open source software is
    that you aren't tied to a single vendor for your support - anyone with the
    appropriate skills can take the source code and
    provide support, as BEA have chosen to do in this case.
    Regards,
    Toby Allsopp.

  • Maximum Nodes supported for NLB and Cluster in Windows Server 2008 Standard Edition ?

    Hi.
    I am looking for information How many nodes supported for NLB and Cluster in Windows Server 2008 Standard Edition ?
    If you can provide for all the versions that would be great.
    -Thanks
    - Ajay Chanana

    Hi,
    You can configure a Windows server 2008 NLB cluster with up to 32 nodes. However,
    scaling beyond 8 nodes will cause a slight performance hit because the network traffic is broadcasted to every node and only one NLB node accepts the connection.
    For more detailed information, please refer to the link below:
    FAQ Week for NLB: Tuesday
    Best regards,
    Susie

  • Sapjco support for Solaris 10 x86 and more...

    Hi,
    Does SAP offer a SAPJCO version that supports:
    1-Solaris 10 using a x86 64-bit CPU?
    2-Solaris 10 using a SPARC 64-bit CPU?
    3-Linux 64-bit?
    4-MsWindows 2003 64-bit?
    PS: I am asking does questions, because I don't seem to have access to the SAPJCO download page.
    Best regards.

    Hi
       Could you please refer this similar [Thread|https://websmp209.sap-ag.de/connectors] .
    Regards,
    S.Manu

  • Also I need ndiswrapper support for solaris 10

    I have a linksys -G type router and my computer uses a Linksys Wireless-G PCI Adapter with SpeedBooster
    which works in Linux like mandrake , debian systems like knoppix and kanotix but their are some buggy like debian also that don't let me change the essid in debian but most linux works with the drivers for my card which are
    04/13/2004 10:01 AM 7,870 BCM43XX.CAT
    03/31/2004 08:44 AM 11,960 BCMWL5.INF
    02/19/2004 11:51 AM 300,928 BCMWL5.SYS
    normally you install the drivers with ndiswrapper -i BCMWL5.INF then use -m to add it too the model loader program in linux which adds wlan0 to ifconfig and iwconfig programs
    which also ndiswrapper requires the source code of the kernel to install the ndiswrapper right , it req. it too compile the drivers, and using the linux gui programs to setup essid and key wep info
    also I use a script in kanotix to use /etc/network/interfaces to load the info on bootup etc.. to get my wireless network card up in linux.
    also how the support for soundblaster sound cards in solaris 10, I have not fingured out if theirs sound yet. freebsd 5.4 seemed to be missing the sound support
    one more thing in bootup of the install program for Solaris 10 my geforce 6800 card detected right but my tv output was all wrong in since the picture , was only on the monitor and tv had stange graphics on it which did not look right I hope nvidia drivers fix this problem , Is their any different command needed for clone mode in Solaris 10 then free86 nd xorg scripts use?

    I got the solutiion from Canon Customer Serivce, temporary until the 10.10 download is released.  It works:
    "You can download the latest software updates at this address:
    http://www.usa.canon.com/cusa/support/professional/professional_cameras/eos_digital_slr_cameras/eos_...
    Please select "OS X Mavericks v10.9" using the drop-down menu on the page.  You have to pick the previous version of Mac OS, because the options for OS X 10.10 Yosemite have not yet been populated.  I sincerely apologize for any confusion this may cause.  After selecting OS X 10.9, please click on the red triangle next to the word "Software" to see the software updates available for your computer.  I would recommend updating all of your software including EOS Utility and Digital Photo Professional."
    I never did find the drop-down menu, but I went into the site map and found what I needed.
    Barry

  • Sun Cluster 3.1 64 bit support  for Solaris 10

    Hi:
    I have some questions when migrate SC 3.1 from solaris 9 to solaris 10.
    1) Does Clutster 3.1 for solaris 10 support 64 bit?
    I have develop own resource type which is compiled with 64 bit mode, while cluster admin program is 32 bit based. E.g. /usr/cluster/bin/scrgadm
    Will that cause any problem? For instance: 32 bit lib and 64 bit lib have the same name libscha.so will be loaded by 32 bit scrgadm and 64 bit my own developped resource type program.
    2) Can I download a Cluster 3.1 install-pkg for solaris 10, 64 bit supported., which means all admin files like scrgadm are 64 bit based.
    Or only ONE Cluster 3.1 version for solaris 10 is deliveried by SUN?
    Thanks in advance!
    BRs
    //rdctahu

    Hi,
    Comments on your 2 questions:
    1) Yes. IIRC, SC31 for S10 actually supports ONLY 64 bit. To be clear, this means
    Solaris has to be booted in 64 bit mode, but 32 bit applications would run just
    fine.
    As for your RT being 64 bit, and scrgadm being 32 bit, no problem.
    2) See (1). You are good.
    Go for it.
    HTH,
    -ashu

  • Out of the box support for Solaris 10???

    I'm curious to what video and network cards are supported out of the box for Solaris 10? I have already viewed the HCL, but the list doesn't really give a straight answer.

    I'm curious to what video and network cards are supported out of the box for Solaris 10? I have already viewed the HCL, but the list doesn't really give a straight answer.

  • Bilingual support for forms6i and Reports6i

    Hi
    We are planning to use Oracle Developer 6i with forms6i and reports6i for a Client server solution and deploy only the runtime on Sun Solaris
    Question: The users need multi-language support for the form labels and report headings etc..
    However,the data in the database will be stored only in English and will be displayed only in English.
    Please let me know if this is possible in Oracle Reports 6i and Forms6i (and how do we implement this)
    Thanks
    G.

    null null ;-),
    Yes you can do this. The way you do this is to use Oracle Translation Builder to translate the contained strings in Reports and Forms. After translation, export the strings back into the Forms and reports modules.
    In Reports you use the rdf format to store multiple language strings and in Forms it's fmb. To get language specific application modules you need to compile the files with the NLS_LANG variable set to the traget language.
    You can compile Forms applications using the Forms Developer interface or the ifcomp60 compiler. Similar for Reports, except that the compiler name is rwconverter. After this all you need to do is to start the applications in the language environment (NLS_LANG) set to target language. On the Web this is the default.env file in Forms, or the registry (or Unix environment) of the Reports Server. In client-server NLS is defined in the registry on Windows or in the environment on Unix.
    Hope this helps.
    Frank

  • Java RTS 2.1 Beta free evaluation release for Solaris and Linux available

    Hi:
    I would like to notify this forum that a free evaluation release of
    Java Real-Time System (Java RTS) 2.1 Beta is now available for downloading
    at our public web site.
    Supported platforms are Solaris/SPARC, Solaris/x86, and Linux/x86 with
    real-time POSIX APIs. The specific Linux distributions which this release
    has been tested on are: SUSE Linux Enterprise Real Time 10 (released)
    and Red Hat Enterprise MRG 1.0 (beta). As for the Solaris versions,
    both Solaris 10 Update 3 and Update 4 are supported.
    The URL for the web page where to start in order to be able to get to
    the download link is:
    http://java.sun.com/javase/technologies/realtime/rts/
    The download link will be presented to you after you fill out a quick
    survey and agree with a click-through, 90-days e-license.
    The latest version of the Java RTS Beta technical documentation
    bundle included with the product is being separately maintained at
    our public website and can be accessed starting from here:
    http://java.sun.com/javase/technologies/realtime/reference/rts_productdoc.html
    Thanks,
    -Carlos
    Carlos B. Lucasius
    Java SE Embedded and Real-Time Engineering
    Sun Microsystems, Inc.
    http://java.sun.com/javase/technologies/embedded/index.jsp
    http://java.sun.com/javase/technologies/realtime.jsp
    http://java.sun.com/javase/technologies/realtime/faq.jsp
    http://developers.sun.com/learning/javaoneonline/j1sessn.jsp?sessn=TS-1331&yr=2007&track=5
    http://developers.sun.com/learning/javaoneonline/j1sessn.jsp?sessn=TS-2901&yr=2007&track=5
    http://developers.sun.com/learning/javaoneonline/j1lab.jsp?lab=LAB-7250&yr=2007&track=4
    http://www.sun.com/training/catalog/courses/DTJ-4103.xml
    http://www.youtube.com/v/xH1yUXd9krU
    http://blogs.sun.com/jtc/
    http://blogs.sun.com/delsart
    http://blogs.sun.com/bollellaRT

    Hello,
    Just a quick question: can we have an official position from Sun regarding support of earlier releases of Solaris with Java RTS 2.1? Our customer is currently running Solaris 10 Update 3 with current Recommended patches, and the 2.1 beta cyclic driver supported this version of Solaris. However with the official release version of 2.1, support for U3 disappeared (only U4 and U5 are now supported). Aside from "rubber stamping" the Solaris build via /etc/release, is there a technical reason why U3 is no longer supported? As long as our kernel is up to date, can we safely use 2.1? Or is it just a case of being unable to officially support and test so many releases of Solaris?
    Is this a general rule-of-thumb we can expect in future: only supporting the last 2 updates of Solaris 10?
    Your advice is appreciated.
    Thanks,
    Dave.

Maybe you are looking for

  • Itunes library no longer sticks to highlighted artist/album

    this has happened only after the recent update. not sure if this makes sense but here goes... if i want to listen to a particular artist/album, i highlight it on the main library window. while listening to the artist/album, i usually browse the other

  • My caps lock LED is not working

    my laptop (splitx2 ultrabook) is hardly a month old and the capslock LED has already stopped working. initially it would just get dim and burn out eventually but now it won't show up at all. i tried updating the bios and system recovery and everythin

  • Would i be better going for a Macbook Pro with retina display or one without for a 15 year old teenager?

    I'm unsure of what to get my son for his birthday, he is a 15 year old teenager doing GCSE's at the moment and needs a laptop for work. this would be his first one, but he uses a desktop a lot, the mac book would be used for programming, some CAD wor

  • Iphone 6 won't lock into landscape mode, keep switching back to portrait mode

    Hi, Please help me, this has driven me nut, I can't seem to lock my iphone 6 into landscape mode, it will only lock my screen when I am in portrait mode. For example, if I open safari and turn my phone sideway, safari would turn into landscape mode,

  • Canon Pixma IP3000 experiences?

    I have a Canon Pixma IP3000 here, and it's an awesome printer, except when I got it (I was still on Gentoo) I couldn't get it to work properly (no duplex support, bad colour prints), so I've been using it from the windows installation on my laptop. B