Support Hyper-V for ACS 5.x

Hi,
I would like to give ACS a try, but my infrastructure is now build on WS 2012 Hyper-V. As I don't have any VMWare licenses and am not planning to get any either, I would like to know. Can ACS be installed in a 2012 Hyper-V VM?
If not, anyone an idea if this is ever going to be implemented?
Thanks for your feedback

ACS5 does not support NIC "bundling" (teeming, etc).

Similar Messages

Remote Agent for ACS for Windows 2008 R2 64-bit

Hi,
We having difficulties with installing remote agent on windows 2008 R2 64-bit server and got the attached error.
Our ACS is 4.2.0.124 and remote agents we tried are :Remote-Agent-ACSse-win-v4.2.1.15-K9.zip and Acs-4.2.1.15.9-RA.zip.
I see following urls says it does not support Windows 2008 R2 and also 64-bit Windows,
https://supportforums.cisco.com/message/3135061#3135061
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289019
However following url says its support 2008 R2 with 64-bit version
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/Release_Notes/acs421_rn.html
Appreciate if someone can adivse us what vesion (file name) of Remote Agent can support (or working) for Windows 2008 R2 64-bit.
thanks in advance

Hi Tarik,
What I wanted to say that the below url says that ACS 4.2 does not support on 64-bit OS:
ACS Requirements
You must use ACS Remote Agent for Windows, version 4.2, with ACS SE, version 4.2. We do not support other Cisco Secure ACS releases.
Note ACS Remote Agent 4.2 for Windows does not support 64-bit operating systems.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289019
However could you please let me know what exact Remote Agent file you recommend to use for windwos 2008 R2 64-bit Server. The ACS SE version that I have is 4.2.0.124.
Thanks

Windows Server 2008 Standard 64 bit edt support Hyper-v replication

Dear Team.
Windows Server 2008 Standard 64 bit edt support Hyper-v replication or not.
If my primary physical server down so my secondary server act as primary server.

Hi,
Windows Server 2008 Hyper-V do not Support Hyper-V replica.
This is a new Feature in Hyper-V for Windows Server 2012.
http://technet.microsoft.com/en-us/library/hh831410.aspx#BKMK_Replica
Regards
Sebastian

Questions regardin "Oracle Database does not support Hyper-V and "

Platform 287 Microsoft Windows Server 2008 (64-bit Itanium)
1 - Can you give me some details about what is not supported of the Hyper-V environment?
2 - There are know issue running Oracle in a Hyper-V child partition/virtualized partition ?
2 - There are know issue about curruption of datafile using snapshoting,
Thanks in advance.

Hello.
Can anybody explain, how should I understand this "Certification Information" from Oracle metalink?
==Quote ==
"Oracle Database is certified with the following Windows Server 2008 editions:
* Windows Server 2008 Standard (x86 and x64)
Oracle Database does not support Hyper-V and Server Core in Windows Server 2008.
==/Quote==
Does it mean that this OS is supported, but only if it does not run in Hyper-v configuration?
Thanks for your advice.
Jakub

Supported operating systems for v2v conversions in vmm 2012 R2

Hi All,
We implemented SCVMM 2012 R2 on one of our customer location, Now we requires to perform V2V migration from VMWARE to SCVMM, before that We have to figure it out the "Supported operating systems for V2V conversions in vmm 2012 R2"
Is there any Tech Net article or information available for the same ?
Thanks Rahul$

Hi,
Below are the Operating systems list:
Microsoft Operating systems that are supported for conversion to Hyper-V from VMware virtual machines:
-- Windows Server 2012 R2 Standard x64
-- Windows Server 2012 R2 Datacenter x64
-- Windows Server 2012 Standard x64
-- Windows Server 2012 Datacenter x64
-- Windows Server 2008 R2 Standard x64
-- Windows Server 2008 R2 Enterprise x64
-- Windows Server 2008 R2 Datacenter x64
-- Windows Server 2008 R2 SP1
-- Windows Server 2008 Standard (x86/x64)
-- Windows Server 2008 Enterprise (x86/x64)
-- Windows Server 2008 Datacenter (x86/x64)
-- Windows 8 Enterprise (x86/x64)
-- Windows 8 Pro (x86/x64)
-- Windows 7 Enterprise (x86/x64)
-- Windows 7 Professional (x86/x64)
-- Windows 7 Ultimate (x86/x64)
-- Windows Vista Enterprise x86/x64
Linux operating systems that are supported for conversion from VMware virtual machines:
-- Red Hat® Enterprise Linux® 6 (x86/x64)
-- Red Hat Enterprise Linux 5 (x86/x64)
-- Ubuntu 12.04 (x86/x64)
-- Ubuntu 10.04 (x86/x64)
-- SUSE® Linux Enterprise Server 11 (x86/x64)
-- CentOS 6 (x86/x64)
-- CentOS 5 (x86/x64)
-- Debian GNU/Linux 7 (x86/x64)
-- Oracle Linux 6 (x86/x64)
-- Oracle Linux 5 (x86/x64)
Thanks Rahul$

Most SharePoint DBs are not supported with AlwaysOn for Disaster Recover?

Hi ...
I'm in the middle of testing and assessing DR site for our SharePoint MSQQL instance. I found a lot of talking about ALwaysOn. I try to figure it out. It is nice and easy, combine DR and HA in single
solution- Wow.
After proceeding with some research I shocked when found only content and secure databases are supported in Async mode for DR site. We have Fail-over cluster (old fashion with shared storage) , what
the beneftis that will give me AlwaysOn in my case from building a DR point of view.
We are running hyper-v and SQL 2012

Thanks Sean for your explaining the answer. Actually I have many options, but the important thing as you said these things you wouldn’t play with. I need something is stable and strong without any complications.
My options are
User either AlwaysOn failover cluster OR Old windows cluster for HA with log shipping for DR.
For me this is supported and somehow acceptable.
User either AlwaysOn failover cluster – Old windows cluster for HA along with AlwaysOn for DR as Async replica. Still not supported from Microsoft.
We have already windows failover cluster with shared storage and I can go directly with log shipping for DR. However, still log shipping is not supported as DR for SharePoint but I’m going to make it as new instance and direct SharePoint farms to the DR
site. This procedure tested as moving database SharePoint instance to new server. It is worked well and straight forward.
Again, I cannot use AlwaysOn for SharePoint as DR while it is not supported (Contents and Secure is supported however as HA is fully supported).

Does GT60-ONC support Hyper-V (Windows Server 2012)??

Does GT60-ONC support Hyper-V (Windows Server 2012)??
I own GT60-ONC bought in Thailand.
I remove windows 8 and install Windows Server 2012.
I want to install Hyper-V feature.
But I cannot see any option to enable virtualization from BIOS.
my current BIOS info.. is
MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in Tue 04/29/2014 at 11:50:02.71
Mainboard: MS-16F3
PCB Version: REV:1.0
BIOS Version: E16F3IMS.10C
BIOS Date: 4/26/2012
EC-FW Version:
please help .........
///

You are using Hyper-V server and not Hyper-V on Windows Sever.
Hyper-V server is free, but it only includes the Hypervisor and no GUI (Only for managing Hyper-V)
what's your physical machine OS ?
If it's Windows 8 or 8.1 then you can enable the Hyper-V management tools (Programs and features, Turn On/off Windows Features, Hyper-V, Hyper-V management tools). Then open the Hyper-V console and connect to your Hyper-V server.
Regards, Samir Farhat Infrastructure and Virtualization Consultant || Virtualization, Cloud, Azure ? Follow and Ask here https://buildwindows.wordpress.com

Does SharePoint/Exchange/SQL/AD Support Hyper-V Snapshots?

Hi,
Help, please.
Does SharePoint/Exchange/SQL/Active Directory Support Hyper-V Snapshots?
Thanks in advanced.

The short answer is NO.
Snapshot/Checkpoint is a point-in-time VM state including its disks, memory, CPU, system state. It does nothing to quiescence the data prior to taking a snapshot. So, SQL/Exchange/AD may not be consistent.
VSS (volume shadow copy) on the other hand does just that.
See this post for more details.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Does Windows 7 support Hyper-V Manager?

Does Windows 7 Support Hyper-V Manager?

It already does. You can get the RSAT tools from here
They include the Hyper-V manager for Windows 7.
After installing the above download, go to Windows Features in Control Panel and choose the 'Role Administration Tools'. Select Hyper-V Tools from there.

Z77a-gd65 supports hyper-threading?

I have seen in some sites in Internet that the z77a-gd65 supports hyper-threading, but there is no mention of it in the MSI official site nor any BIOS option to enable and disable hyper-threading is described in the manual
Do you guys know whether multi-threading is supported or not?
Thank you very much in advance for your reply!

Thanks Froggy Gremlin for your reply.
There is no shot of this subsection. In page 2-10 there is a shot of the "OC Section" and in page 2-15 a reference to a read only CPU specification sub-menu, but no reference to the HT-setting at all. Maybe I am reading an outdated manual, but it is the one from the official MSI site at //download2.msi.com/files/downloads/mnu_exe/E7751v2.2.zip
But if you have the mainboard and you know there is this option, I trust your word. I am probably buying it but wanted to know before if this option was available.

Hyper-V for hospital information system, calculation and requirements?

Hi All,
This is my first post here, i am a technical support and developer for one of hospital information system, because its application for healthcare so this application demands performance, reliability and high availability, after a long discussion with my
team, we decided to deploy our application and database on Hyper-V VM's. But the problem is we never deploy this apps in VM's before, we usually deploy on physical server, here are our scenario:
for VM1 : Application server (Windows Server 2012 R2), our application would be optimal serve 100 users running on 1 processor with 6 cores (if deploy on physical server) and 16GB memory.
for VM2 : Database server (SQL Server 2012 R2), usually we use 4 to 6 cores (if deploy on physical server) with 16GB memory.
the questions:
1. Can someone help me with the Hyper-V VM's calculation or configuration regarding computing power for host and guest? like how much vCPU? Dinamyc Memory? (we intended using Hyper-V Server 2012 R2 as hypervisor)
2. What if i want to use fail-over cluster ? does our fail-over must be on VM's too?
3. For SQL Server on VM, which one more impact on performance, assign a lot of vCPU or memory?
4. Can someone suggest me the hardware requirements for those scenarios?
Thank you for the help.
Regards,
Mahdi.

Without knowing the exact performance characteristics of the applications, it is really difficult to provide any information about the effects of oversubscribing the CPUs or memory. So, just look at it as though it were a physical deployment.
"1. Can someone help me with the Hyper-V VM's calculation or configuration regarding computing power for host and guest? like how much vCPU? Dinamyc Memory? (we intended using Hyper-V Server 2012 R2 as hypervisor)"
Many servers you purchase today will come with two processors and 8 cores (forget about simultaneous multithreading at this point) giving you a total of 16 logical CPUs. Create your VM with 6 virtual CPUs and 16 GB of memory for Application 1.
Configure your SQL VM similarly. I don't know what issues might arise with Application 1 with dynamic memory, but SQL performs best without it. Most servers today will have at least 64 GB of memory. With the above configuration, you have
plenty of headroom on a pretty average server.
"2. What if i want to use fail-over cluster ? does our fail-over must be on VM's too?"
With Failover Clusters, you cluster the Hyper-V role. This means that the VMs will fail back and forth. Remember, though, this is at the VM level and not at the application level, meaning that if Hyper-V host 1 fails, the VMs restart on Hyper-V
host 2. Now, it is possible to also create failover clusters between VMs. This is quite common with SQL. When clustering VMs, you would need to install VMs on each node of the Hyper-V cluster. Then if Hyper-V host 1 fails, there is
an instance of SQL running on host 2 ready to take over. The recovery time is much shorter. You will have to ask the vendor of Application 1 if it is a cluster-aware application.
"3. For SQL Server on VM, which one more impact on performance, assign a lot of vCPU or memory?"
Without more information, that is pretty hard to answer. Generally memory helps first, but depending on the types of query/update activity, multiple CPUs is also helpful. Start at 4 and monitor to see if more would help.
.:|:.:|:. tim

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

How can I copy multiple slides with a HP Scanjet 4050 to photoes using Maverick? HP apparently no longer supports this product for this OS.

How can I copy multiple slides with a HP Scanjet 4050 to photoes using Maverick? HP apparently no longer supports this product for OS Maverick.

VueScan
VueScan FAQ

SAP R/3 4.6 B Support pack level for AIX 5.2

Hi,
We have upgraded O.S version from AIX 4.3 to AIX 5.2. Here our environment is SAP R/3 4.6B and DB oracle 8.1.7.
My question: Do we apply any support pack to the system after support pack upgrade. Please find the below support pack level for our current system.
SAP_BASIS      46B           0054    SAPKB46B54
SAP_ABA         46B           0054    SAPKA46B54
SAP_APPL       46B           0054    SAPKH46B54
SAP_HR           46B           0000        -
ST-PI            2005_1_46B    0003    SAPKITLQC3
Please request the feedback.
Thanks & Regards,
Narayana Murthy.

Do we apply any support pack to the system after O.S upgrade ?
( Correction for the below posted mail)

Is DD/MM/YYYY supported in webdynpro for abap application

Hi All,
We are using 2 different time statements one developed in webdynpro for java and other in webdynpro for abap.date format in java is DD/MM/YYYY but in webdynpro for abap is DD.MM.YYYY.
is DD/MM/YYYY supported in webdynpro for ABAP application or even if user enters DD.MM.YYYY can we convert that to DD/MM/YYYY so that we will maintain uniformity in both the applications
Thanks
Bala Duvvuri

Hi Bala,
We can convert the date before saving ,even if the user enters the date as dd.mm.yyyy as mentioned below.
DATA: lv_indicator type XUDATFM .
CALL FUNCTION 'ISH_GET_USER_DATE'
EXPORTING
    USER_NAME         = SY-UNAME
IMPORTING
    DATE_FORMAT       = lv_indicator .
CASE lv_indicator.
    WHEN '1'.                                        " DD.MM.YYYY
      CONCATENATE p_date6(2) '.' p_date4(2) '.'
                  p_date(4)
         INTO p_result.
    WHEN '2'.                                        " MM/DD/YYYY.
      CONCATENATE p_date4(2) '/' p_date6(2) '/'
                  p_date(4)
         INTO p_result.
    WHEN '3'.                                        " MM-DD-YYYY.
      CONCATENATE p_date4(2) '-' p_date6(2) '-'
                  p_date(4)
         INTO p_result.
    WHEN '4'.                                        " YYYY.MM.DD
      CONCATENATE p_date(4) '.' p_date+4(2) '.'
                  p_date+6(2)
         INTO p_result.
    WHEN '5'.                                        "YYYY/MM/DD
      CONCATENATE p_date(4) '/'   p_date+4(2) '/'
                  p_date+6(2)
         INTO p_result.
    WHEN '6'.                                        "YYYY-MM-DD
      CONCATENATE p_date(4) '-' p_date+4(2) '-'
                  p_date+6(2)
         INTO p_result.
ENDCASE.
Regards,
Lakshmi.

Support Hyper-V for ACS 5.x

Similar Messages

Maybe you are looking for