Support Pack General Question:- IMPORT_PROPER phase
Hi All,
Is there any command at OS level to complete IMPORT_PROPER phase of SPAM transaction (support pack import)?
Hi ,
Is there any command at OS level to complete IMPORT_PROPER phase of SPAM transaction (support pack import) in My QAS system............. ?
I tried the following command in my DEV & QAS System.but not solved.
C:\>tp cleanbuffer qas pf=myprofile.pfl
This is tp version 320.56.89 (release 620)
E-myprofile.pfl could not be opened.
EXIT
Error in myprofile.pfl: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
Similar Messages
-
Does any subsequent FP (in a series of FPs) address all previous FPs?
(ie: Will FP 4.7 address 4.6, 4.5, etc? )Yes, all Fix Packs and Service Packs are cumulative.
-
Applying Support Pack taking Long time about 20 - 22 hrs per Patch.
Dear Gurus,
Recently we have upgraded from 4.7EE to ECC6.0, then we started applying Support Packs , and During the phase of IMPORT_PROPER it is taking time like any thing.. Near about 20 - 22 hrs .. for all the patches.
we have scheduled it in the Background. ... will there be any difference if we load them in Dialog.
tp, r3trans are working fine.
entries are there in PAT01,
Are there any Check points, Buffer size values that are needed to meet the Min Size values.
In general what should be the Shared Poool, Swap, Virtual Memory value,Export/import buffer sizes ?
How can we Improve this Import Phase ????
OS : Solaris 10 :- RAM = 8 GB, 2 CPU Processor,
DB : Oracle 10.2.0.2
SAP: ECC 6.0, Rel 700,
Kernel : 700 , patch level 146.
SPAM : patch level 23.
Gurus Pl suggest me ... to overcome this issue.
Thanks in advance.Hi,
Thanks For your Prompt reply.
as u have mentioned to increase the SWAP space, we have increased by 2 GB, 2 days before only... But still the Loading of SAPKW70010 is going on. its all about 23 hrs till now.
No, I ve defined only one support pack in the Q.. that is SAPKW70010.
Pl any body help me in this regard.
Thank u. -
ECC Add On ECC-SE Support Pack Hangs
Hi All,
I am aapplying support pack patch 01 on ERP 6.0 EHP 4 system after installating the Add-On ECC SE.
But the Support Pack is hanging for days now. Even restarted the system and restarted the SPAM but that's not helping.
Support Pack is hangign at Phase XPRA_EXECUTION
Checked the import logs and the error there was :
==========================================
Under Method Execution->
Program terminated (job: RDDEXECL, no.: 15381500)
See Job logs
Job Log Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server xxxserver148079 were synchronized
The current transaction was reset
Job also cancelled due to process termination. See the system log
Job cancelled due to system shutdown
Execution of programs after import (XPRA)
End date and time : 20100427100024
Ended with return code: ===> 12 <===
===========================================
But in SPAM the STATUS is not Error Stop or else ..there the stop watch is running and message Execution of Reports After PUT
SLOG
=============
STOP tp_getprots MD1 R 20100427100749 101995 xxxserver48079
STOP EXECUTION OF REPORTS MD1 R 20100427100749 101995 xxxserver148079
START EXECUTION OF REPORTS MD1 R 20100427100957 DDIC xxxserver148079
START tp_getprots MD1 R 20100427100957 DDIC xxxserver148079
===============
Based on this SLOG info i tried SAP note 71353 symptom 2 and checked the status of Active jobs .Only one job is active RDDEXECL
Also tried SAP note 954792 and changed profile parameter rdisp/bufrefmode profile to value sendoff/exeauto ..but that also hasn't helped.
Pls suggest.
Regards
AjayHello Ajay,
What is ECC-SE release. Please note it must be 604 in case of ERP 6.0 EHP4 systems. First let us know what you are tring to install. The error you are facing is generic and doesn't help in understanding the problem!
Regards.
Ruchit Khushu -
Support Pack upgrade error in Import Phase
Hello,
Currently I am upgrading SCM system with Support pack level 12 to 20 . When i am applying Basis 12 to 20. I got an error in Import_Proper phase.
Could you please help me on this? I tried and still searching solution for this..But no luck...
Os is : AIX and
Log File: /usr/sap/trans/log/SAPIB70013.xxx
Main import
Transport request : SAPKB70013
System : xxxx
tp path : tp
Version and release: 372.04.71 700
child process 934006 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_OBJECT_COLLECTION==========CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1212554 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDR_APPLICATION_WINDOW=====CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1171520 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDY_MD_EVENT_SOURCE========CI
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1331412 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
child process 1310922 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_END
tabname: WDY_APP_PROPERTY
len (char): 64
key: DEMO_UIEL_DROPDOWN_BY_IDX DEMO_VIEW
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 018446 - 999999 not imported because the child processes died for unknown reason
child process 1310924 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDY_MD_OUTGOING_EVENT======CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1286192 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 009158 - 018411 not imported because the child processes died for unknown reason
import portion 018412 - 018527 not imported because the child processes died for unknown reason
import portion 018528 - 999999 not imported because the child processes died for unknown reason
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
Main import
End date and time : 20100909034914
Ended with return code: ===> 12 <===
| ######################################
Thanks and Regards,
Sankar
SAP BASIS ConsultantHi,
Thanks for you reply. I restarted import but no luck still. I activated some object also not working. when i call SPAM it is not going to the SPAM pager. Showing dump...
Runtime Errors CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 10.09.2010 09:41:37
Short text
Function module "POSS_UIREQ_OPT_SUBMIT" not found.
What happened?
The function module "POSS_UIREQ_OPT_SUBMIT" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPLSTXC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
not caught in
procedure "OPEN_FORM" "(FUNCTION)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLSTXC" contains the CALL FUNCTION statement.
The name of the function module to be called is "POSS_UIREQ_OPT_SUBMIT".
No function module exists with the name "POSS_UIREQ_OPT_SUBMIT".
All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attenti
upper/lower case and underscores ("_").
or
b) Transport error
c) In the case of an enqueue/dequeue module,
the lock object may not have been activated
(ABAP/4 Dictionary).
When i tried to check function module it is not there..
Could you please help on this?
Regards,
Sankar Basis Consultant -
4.7 x 2.00 Support Pack Question
Hello,
I am attempting to apply upgrade from PI_BASIS 2004_1_620 to PI_BASIS 2005_1_620 on an R/3 Enterprise 4.7 x 2.00 System.
Using the SAINT tool, I am bringing in the SAPKINBB7A OCS package. I have tried the following queues:
SAPKINBB7A by itself
SAPKINBB7A with follow-up patches SAPKIPYJ51 to 3
SAPKINBB7A with follow-up patches SAPKIPYJ51 to 7
Each time, I get an IMPORT_PROPER failure:
Error in phase: IMPORT_PROPER
Reason for error: TP_STEP_FAILURE
Return code: 0012
Error message: OCS Package ALL, tp step "N", return code 0012
The error has the symptom of notes 794802 and 751864. However, the 751864 code is already present in the system before I begin.
If anyone has seen this particular set of circumstances, I would appreciate the input.
Regards,
JohnHello,
My SPAM/SAINT is updated to the latest level (patch 20). My Kernel is patched up to level 129.
I tried the Extras >> Ignore generation errors. However, this simply returned the message, "No generation errors found".
After further review of the logs, etc. I came across note 903242 which described the problem perfectly. After applying the suggested solution, the support packs proceeded to the next step.
Thank you for your help.
Regards,
John -
Support Package still running in Import_proper phase ( KB70017)
Dear all,
When i appling Basis Support Package ( KB70017) , still its running the import_proper phase and its running around 12 hours .
kindly suggest me to resolve the issue
RegardsDear all ,
i applied Basis Patch it took long time and still its not complete so i restart the server .
now i cant able to login SAP its giving Syntax error kindly advise me
i found these are the logs in this directory usr\sap\trans\tmp logs
1 , UMODPROT.SID log
ETN080X*************************************************************************
1 E0U531 "Report RSUMODSP (modified objects)"
1 ETN252 Start date: "15.01.2010"
1 ETN253 Start time: "11:40:03"
1 ETN080 *************************************************************************
3 E0U531 "Analysis for OCS Package Queue:"
3 E0U531 "SAPKB70017"
3 E0U531X"Special handling of SORTTABS tables..."
3 E0U532X"Check objects of request" "SAPKB70017"
3 E0U531X"Update modification information..."
3 E0U531X"Summary:"
3 E0U531 "No modified SAP objects found"
1 ETN080X*************************************************************************
1 E0U531 "Report RSUMODSP (modified objects)"
1 ETN252 Start date: "15.01.2010"
1 ETN253 Start time: "11:53:07"
1 ETN080 *************************************************************************
3 E0U531 "Analysis for OCS Package Queue:"
3 E0U531 "SAPKB70017"
3 E0U531X"Special handling of SORTTABS tables..."
3 E0U532X"Check objects of request" "SAPKB70017"
3 E0U531X"Update modification information..."
3 E0U531X"Summary:"
3 E0U531 "No modified SAP objects found"
AMODPROT.SID log
1 E0U532 "Report RSUMOD10_SP" "(Classification of Modified Objects)"
1 ETN252 Start date: "15.01.2010"
1 ETN253 Start time: "11:54:57"
1 ETN080 *************************************************************************
3 E0U533X"Fetch objects to be adjusted" "(SPDD)" "from UMODOBJ..."
4 E0U533 "Fetch objects from request" "SAPKB70017" "..."
3 E0U532 "0" "objects to be adjusted were fetched"
CMODACT.SID log
ETN085X"OCS Package Queue Import:" "15.01.2010" "10:23:11" " "
1 ETN085 "(De)activate customer exits:" " " " " " "
1 ETN085X"OCS Package Queue Import:" "15.01.2010" "11:23:22" " "
1 ETN085 "(De)activate customer exits:" " " " " " "
IMODPROT.SID log
1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
1 ETN252 Start date: "15.01.2010"
1 ETN253 Start time: "09:45:14"
1 ETN080 *************************************************************************
Regards
1 ETN080X*************************************************************************
1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
1 ETN252 Start date: "15.01.2010"
1 ETN253 Start time: "11:08:39"
1 ETN080 *************************************************************************
1 ETN080X*************************************************************************
1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
1 ETN252 Start date: "15.01.2010"
1 ETN253 Start time: "11:54:58"
1 ETN080 ************************************************************************* -
Support Packages Installation Stops at IMPORT_PROPER Phase
Hi Sap stars,
I have started Installation of support packages for PI 7.1 Cluster Server , It got stuck at phase Import_Proper
and do not do anything , Then I executed the TP R3I .....COMMAND Which executed successfully
Then I executed the Command
tp showbuffer SID tag=spam pf=G:\usr\sap\trans
\bin\TP_DOMAIN_SID.PFL
This is tp version 375.33.68 (release 710, unicode enabled)
SID buffer:
SAPKB71007 | | |has already been imported completely
that makes 0 transports to be imported.
tp finished with return code: 0
meaning:
Everything OK
But still in SPAM it is showing the IMPORT_PROPER status in RED
Could anyone tell me how can this status get changed and Import other Support Packages
Thanks In Advance
Anil KumarHi Raghu,
I have used the tp r3i command when I got stuck in Import_proper Phase It ended with TP retun code 008
2EETW109 TABLE "SQL_TOOL_GROUPT" does not exist in Nametab
When I try to run any Transaction Code it is throwing an Dump
OS-Windows, Database_Sqlserver 2005 Application-PI 7.1
Can u pls suggest me what can I do to sort this issue
Thanks In Advance
Anil -
Error in IMPORT_PROPER phase
Hi guys,
I am trying to apply SP on my system 09-15
and I get and import_proper phase error below:
The import was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
SAPKB64010)
Tried the following:
Generated a new TP Parameter through STMS
Clear the log files
Tried to clear the buffer manually with S37 OCS_RESET_QUEUE getting an object locked message.
Updated the Kernel and SPAM/SAINT
Please Help
Thanks,
DamienHi All!
I have a similar problem on my Netweaver'04 BW Productive Instance, STMS is on Stuck and no more transport are possible!!!
VERY BAD!!!
I have the SAME error and i checked all the possible but finding nothing interesting
Following a print screen from varous commands such as "TP SHOWPARAMS" "TP ADDTOBUFFER" etc..
Could you check again for me?
Thanks in advance...
G.R.
*0000
*0000
I
BSVK900675 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900677 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900678 | | |0000 | | |0000 | |
*0000
*0004
I
BSVK900657 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900659 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900655 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900661 | | |0000 | | |0000 | |
*0000
*0004
I
BSVK900663 | | |0000 | | |0000 | |
*0000
*0004
I
BSVK900665 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900680 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900681 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900685 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900687 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900688 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900690 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900691 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900692 | | |0000 | | |0000 | |
*0000
*0000
I
BSVK900695 | | |0000 | | |0000 | |
*0000
*0000
I
that makes 174 transports to be imported.
tp finished with return code: 0
meaning:
Everything OK
C:\Documents and Settings\bpradm>tp addtobuffer bsvk901395 bpr pf=d:\usr\sap\tra
ns\bin\tp_domain_bsv.pfl -Dtransdir=d:\usr\sap\trans
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.09 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBNAME is no longer used.
Addtobuffer failed for BSVK901395.
Neither datafile nor cofile exist (cofile may also be corrupted).
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247
tp finished with return code: 247
meaning:
addtobuffer has problems with data- and/or cofile
C:\Documents and Settings\bpradm>tp addtobuffer bsvk901395 bpr pf=d:\usr\sap\tra
ns\bin\tp_domain_bsv.pfl -Dtransdir=d:\usr\sap\trans
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.09 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBNAME is no longer used.
Addtobuffer failed for BSVK901395.
Neither datafile nor cofile exist (cofile may also be corrupted).
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247
tp finished with return code: 247
meaning:
addtobuffer has problems with data- and/or cofile
C:\Documents and Settings\bpradm>tp addtobuffer bsvk901396 bpr pf=d:\usr\sap\tra
ns\bin\tp_domain_bsv.pfl -Dtransdir=d:\usr\sap\trans
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.09 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBNAME is no longer used.
Addtobuffer failed for BSVK901396.
Neither datafile nor cofile exist (cofile may also be corrupted).
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247
tp finished with return code: 247
meaning:
addtobuffer has problems with data- and/or cofile
C:\Documents and Settings\bpradm>tp help
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.09 (release 640)
usage: tp <command> [argument(s)] [option(s)], where <command> may be one of:
Exporting I Buffer Actions I Disk Space
EXPORT I EXPWBO I ADDTOBUFFER I DELFROMBUFFERI CLEAROLD
R3E I VERSE I SETSYNCMARK I DELSYNCMARK I CHECK
SDE I I SETSTOPMARK I DELSTOPMARK I TESTOLD
TST I I MARK I UNMARK I
I I CLEANBUFFER I I
Importing I Special Functions I Information
PUT I I LOCKSYS I UNLOCKSYS I SHOWBUFFER
IMPORT I CHNTABS I LOCK_EU I UNLOCK_EU I COUNT
CMD I R3I I WRITELOG I GETPROTS I SHOWPARAMS
LIM I MEA I SAPSTART I SAPSTOP I GO
R3H I MVREPOS I GETTBATGENT I GETTRBATENT I CONNECT
ACT I MVKERNEL I GETDDXTTENT I GETDDXTFENT I CHECKIMPDP
TACOB I SDI I GETOPENCORR I CREATECOFILE I SHOWINFO
GENTB I GENT1 I PREPAREBUFFERI CREATEINFO I GETOBJLIST
GENT2 I GEN I CONTP I EXPCHK I EXTRDOCU
DIST I XPA I SHOWSEMAPHOREI SHOWSEMACLIENI GETCONVENT
MVNTABS I VERSI I SETSEMAPHORE I DELSEMACLIENTI EXPLAINRC
IMPSYNC I DELIVER I DELSEMAPHORE I GETTPSTATENT I
For more details call tp with the desired command (and no other parameters)
C:\Documents and Settings\bpradm>tp showparams bsvk901396 bpr pf=d:\usr\sap\tra
ns\bin\tp_domain_bsv.pfl -Dtransdir=d:\usr\sap\trans
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.09 (release 640)
ERROR: : parameter -Dtransdir=d:\usr\sap\trans has wrong length
Usage of command SHOWPARAMS:
tp SHOWPARAMS <SAPSID> [options ...]
Reads the parameter file and displays the current setting.
Options:
parname=<name> display the value of the parameter <name> only
pf=<TPPARAM> specify a transport parameter file
silent redirect stdout to dev_tp in current directory
-D"<entry>" specify a parameter for tp
-t<k> specify a trace level for tp
tf=<filename> specify the name of a trace file for tp
shdwtadir=<tabname> specify the name of a shadow TADIR
Description of arguments:
<TPPARAM> (complete) path of a transport parameter file
<entry> a parameter description as in a tp parameter file
<SAPSID> R/3 system's name, (target or source whatever is appropriate)
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0206
tp finished with return code: 206
meaning:
parameter %s has wrong length
C:\Documents and Settings\bpradm>tp showparams bpr pf=d:\usr\sap\trans\bin\tp_do
main_bsv.pfl -Dtransdir=d:\usr\sap\trans
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.09 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBNAME is no longer used.
Parameters having their default value are displayed with a '>' as separator.
Global settings:
TRANSDIR : d:\usr\sap\trans\
ALLLOG : ALOG0605.BPR STOPONERROR > 9 SYSLOG : SLOG0605.BPR REPEATONERROR> 9
ABAPNTFMODE > t
TP_VERSION : 266
STOPIMMEDIATELY > 1 =TRUE
NEW_SAPNAMES > 1 =TRUE SQL_TRACE > 0 =FALSE
DUMMY > 0 =FALSE
CTC > 0 =FALSE NBUFFORM : 1 =TRUE
BUFFERFORMAT >
SSFKEYS >
SSFSIGNER >
SSFLIB >
SSFPAB >
ALLOW_RC4 > 1 =TRUE SID_LOG_FILES > 0 =FALSE
IMPMON_MODE > NORMAL IMPSMON_MODE > OFF
TRACE2SERVER > 0 =FALSE
DB-connection:
CONNECT_MODE > USE_ENV
MOD_ENV >
DBTYPE : ora
MSSQL_USEINTEGRATEDS >
MSSQL_SCHEMA >
DROPSTATISTICS > 1 =TRUE
DBS_DB2_PLANNAME >
RSDB_DB2PSLIBRARY >
Distribution of transports:
SYSTEM'S NAME : BPR VERS_AT_IMP > NEVER
SEPARATE_DELIVERY > 0 =FALSE
TESTSYSTEMS :
DELIVERYSYSTEMS :
SOURCESYSTEMS :
TARGETSYSTEMS :
SAPNAMES_LOGGING : ALL
VERS_AT_EXP > 1 =TRUE
CREATE_REPLIST > 0 =FALSE
R3trans:
R3TRANSPATH > R3trans.exe
R3TRANSSTAT >
LOCALR3TRANS > 0 =FALSE
CLIENTCASCADE > 0 =FALSE
RECCLIENT >
LANGUAGE >
LSM > NONE
SLI > -1
CHECKMASTERLANG > 0 =FALSE
RESTRICTLANG >
IMPORTSHADOW > 0 =FALSE
R3TRANSOPTIONS >
FILESPLIT > 0
ACC_IMPORT > 0 =FALSE
DDACTIVE > 0 =FALSE
SMODI > 1 =TRUE
PRESERVEMODINFO > 0 =FALSE
CHEATCLIENT000 > 0 =FALSE
LANGDELETIONS > 1 =TRUE
Transport daemon:
BATCHHOST >
SYSTEM_NR >
SYSTEM_PF >
SAPEVTPATH > sapevt.exe
Import in general:
MAINIMP_PROC > 1
> 0 =FALSE LOGICALIMPORT > 0 =FALSE
SETUNICODEFLAG > 0 =FALSE DDINACTIVE > 0 =FALSE
MAB > 1 =TRUE
R3UP > 0 =FALSELOCK_CHECK_WAIT_TIME > 0
EXP_CHECK_WAIT_TIME > 0 W_IMPORT > 1 =TRUE
W_NEVER > 0 =FALSE
K_IMPORT > 1 =TRUE K_NEVER > 0 =FALSE
T_IMPORT > 1 =TRUE T_NEVER > 0 =FALSE
C_IMPORT > 1 =TRUE C_NEVER > 0 =FALSE
BUFFERSNAPSHOT > 0 =FALSE
PUT:
PUTSTEPS > *=<Lw(H3A)dG
STARTSAP >
STOPSAP >
BUFFRESET > 1 =TRUE BUFREFTIME > 180
LOCK_EU > 1 =TRUE MC_ENQ_STEP > 1 =TRUE
GENERATION > 1 =TRUE RESET_TIMESTAMPS > 0 =FALSE
TATAF_TOLERANT > 0 =FALSE RESET_DBPOS > 0 =FALSE
NTACT_TIMECMP > 0 =FALSE
MVNTAB_LIST_FAILED > 1 =TRUE
Kernelmove:
KERNELMOVE > 0 =FALSE CLEANIPC > 0 =FALSE
EXELIST >
FROMDIR >
TODIR >
KERNELMOVEPATH >
CLEANIPCPATH >
Clearold:
DATALIFETIME > 200 OLDDATALIFETIME > 365
COFILELIFETIME > 365 LOGLIFETIME > 200
Properties:
SemaServer.Host : NULL
SemaServer.Port : NULL
tp.Semaphores : FILE
tp.ConnectTimeout : 10000
tp finished with return code: 0
meaning:
Everything OK -
ABAP + Java Support Pack installation
When updating support packs in an ABAP+Java environment (ECC 6.0), is there any reason why one could not do the Java Support Packs first, followed by the ABAP support packs? We are trying to update our support packs as efficiently as possible, and would like to update our java support packs first, followed by the ABAP stack a few days later.
In regards,
MichaelHi!
There can probably not be a general answer to that question. There are some functionality where ABAP and JAVA are closely linked and where you'll most likely run into problems if the levels do not match.
Technically there is no problem as applying the SP-Stack for Java and applying SPs for ABAP are independent (technical) tasks, but you will have to VERY carefully check the dependencies and carefully test this in a QA-environment.
If you want my advice: Try to find a 'big shot' solution where you do all in one move.
Regards,
Jörg -
SAP_APPL(SAPKH60012)-eroor during Import_Proper phase
Hello All,
I has an ECC 6.0 sytem and was applying SAPKH60012-SAPKH60013 together.
During the TEST-IMPORT i got the following error for both the support package
"R3TRMSAGME was repaired in this system".
I had ignored the error during TEST_IMPORT.
But now i am stuck with this in my IMPORT_PROPER phase.
Please suggest, I did not find any SAP Notes for this error.
Also the main error
Error in phase :IMPORT_PROPER
Reason of the ERROR:TP_STEP_FAILUER
Return Code: 0008
Error Message :OCS Package SAPKH60012 , tp step "I",return Code 0008
Also i found in the log this error
Start import LIMUDOCUNAME818
R3TRMSAGME was repaired in this system
LIMUDOCUNAME818
Regards
Anthony
Edited by: Anthony D'souza on Mar 6, 2009 11:11 PMHi,
For this error "R3TRMSAGME was repaired in this system". You need to reset the repair fag by using tcode se03.
Also this error "TP_STEP_FAILUER" says that tp failed. If you have upgraded kernel level before sp upgrade then check current tp's version. If you have not upgraed tp.exe then download latest tp.exe & put it in your kernel path & restart the sp upgrade.
Please check ksap note for known problem in Support packs for your SAP release
Also check below threads. It will help you
Re: spam error in IMPORT_PORPER
tp
Thanks,
Sushil -
Dear Team,
When I am running Support pack SAPKB70010.
The import was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
Error in phase: IMPORT_PROPER
Reason for error: TP_CANNOT_CONNECT_SYSTEM
Return code: 0212
Error message: could not access file as supposed (see dev_tp or
SLOG1025.R3P for more de
I have check my STMS is proper configure.
When I check System Log in /usr/sap/trans/log/
START imp all R3P 20100621070516 DDIC testserver 20100621070516
INFO: event SAP_IMPORT_START triggered successfully
START tp_getprots R3P S 20100621070517 DDIC testserver 20100621070516
STOP imp all R3P 7006 20100621213330 DDIC testserver 20100621070516
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
START imp all R3P 20100621224459 DDIC testserver 20100621224458
INFO: event SAP_IMPORT_START triggered successfully
START tp_getprots R3P S 20100621224500 DDIC testserver 20100621224458
How I do this one
Regardshow about reading your error message completely?
Error message: could not access file as supposed (see dev_tp or SLOG1025.R3P for more -
DDIC_ACTIVATION Error during application of Support Pack SAPKH47007
Hi All,
We were trying to apply Support Pack SAPKH47007 and it gave us an error in DDIC_Activation Phase and when i checked the logs it gave us this error
Relationship TMFK-TDID for table TTXS does not exist
Check dependent search help S_TMFK_SETTLE
Search help S_TMFK_SETTLE is consistent
I searched and found one Relevant Note for this SAP Note Num : 625098 and it tells us to delete the following fields
Delete the fields FLG_AK_PAYM_FICA and FLG_AK_PAYM_FIAR from the table
I went to SE11 and i dont see this fields there, and even though if i see them i dont think i can delete them coz it is asking Developer Key.
Upon further checking i found that if we delete the Contents in Pat01 and Pat03 we can go ahead and redo the support packs from begining. Can anyone throw some light on this as to how safe is this?
Regards,
Ershad Ahmed.Did you read the note I gave you?
The note says:
Symptom: An error occurs in the DDIC_ACTIVATION phase when you import Support Package SAPKH47007. The DDIC activation log records the following error messages:
Relationship TMFK-TDID for table TTXS does not exist
<...>
Solution: A general solution to the problem is available with R/3 Support Package SAPKH47010. To avoid the error, import the Support Packages SAPKH47007 and SAPKH47010 together in a queue.
If you have already encountered this error, the queue must be reset and extended to include Support Package SAPKH47010. Since you cannot reset the queue from the DDIC_ACTIVATION phase using normal means, this must be done by SAP Support (Component BC-UPG-OCS).
Markus -
Objects are locked in open change requests during support packs update
Hi All,
We are applying support packs in the ECC Dev system. Its giving error in phase OBJECTS LOCKED..? after that i checked with ABAP consultant he given requests which i unlocked the objects from SE03. Still the same error Objects are locked in open change requests is coming.
If i checked requests which are not released, those are in hundreds which we can not release. How can i find a specific object which i need to unlock or any chance to skip the phase and continue. Because 15 days back i have updated the support packs without any of the issue.
Please suggest me whether i can find the specific objects to unlock or any other process.
Thanks & Regards,
Sreekanthsreekanth jd wrote:
Still the same error Objects are locked in open change requests is coming.
>
Hello,
Normally when we double click on that error message 'objects are locked', system takes us to the transport requests containing those objects in question.
And did you try SE03 --> Objects in Requests --> Search for Objects in Requests/Tasks ?
Thanks -
SAP_HR Support Pack Problem
Hello,
I am trying to apply the year-end support packs for SAP_HR (SAPKE50023 - SAPKE50026). I get so far with SPAM, but then I get the following error: Error in phase: IMPORT_PROPER, Reason for error: TP_STEP_FAILURE. I applied the latest TP version just in case that was the problem, but it did not solve it. Any ideas?
Thank you for your time,
Erin ByrneHi Ruchit,
In SPAM, it says the following:
Error in phase: IMPORT_PROPER
Reason for error: TP_STEP_FAILURE
Return code: 0012
Error message: OCS Package ALL, tp step "N", return code 0012
I looked at the system log, but there was not anything new there. In /usr/sap/trans/log, I looked at my N log, & it basically said CONVERSION OF DD OBJECTS (TBATG) ended in return code 0012. It was not very helpful. I applied TP version 145 (the latest one I found), but that did not help the issue. When I look in STMS, there are no errors in the setup either. Any help you can offer would be much appreciated.
Thank you,
Erin
Maybe you are looking for
-
Credit memo cant add with cost 0.
Dear all i have a customer , this upgrade he´s systema to 8.8 in 007 he can add invoices with some lines with cost 0 (cero) and then add his credit memo with (cost cero) in the stock audit the item has not cost cero. in 8.8 they cant do this. someti
-
Error on installing Itunes 10.5 on Windows Vista 64 Bit
Hi All, I am receiving below error when I try to install Itunes 10.5 on my Windows Vista 64 Bit .... But was able to install 10.4.1 succesfully . "An error ocurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",ty
-
Attachments.Add COMException HRESULT: 0x80004004 (E_ABORT)
I overrode the Outlook attach file button by my ribbon command: <commands> <command idMso="AttachFile" onAction="onAttachFile" /> </commands> In the ribbon class I implemented the prompt to use my own attach file logic or default. I didn't found how
-
Integer not incrementing because of an if statement
I have an Objective-C app here - and I am wishing to alter a variable (integer) each time the app runs. My code below will work, but when the integer reaches the number specified in the if statement, it no longer increments as instructed. - (void)awa
-
Microsoft Office documents cannot be selected for combination into a PDF.
I have reinstalled Acrobat Pro XI twice. Version of Office is 2010 32-bit. See screenshot below. Office documents are not available as supported at all.