Survey anonymous login

hi ,
I created a survey, but to fill the survey you have to enter username and password. How can I fill the survey directly without entering the username and password?
Hayit

Hello,
Refer to below thread which might help you to resolve your problem.
How to logon to CRM survey as marketing contact?
Thanks
Raja Pamireddy
CRM Marketing forum Moderator.

Similar Messages

  • File Adapter - anonymous login (or )User name ,password login - Efficient?

    Hi Folks,
    In File Adapter processing , anonymous login (or) proper user name password based login is recommended ?
    Because we have faced many issue while using username based login in File adapter  .
    Which one is best ?
    Regards.,
    Shiva

    Hi Shiva ,
    We will go one by one :
    You can go for the Anonymous login  but the problem is the any body can access the FTP server and it is not the secure one,that is why business generally don't allow the Anonymous login.
    Coming to Proper user name password login ,I would advice you to use this one as the connection is more secure in this case.But this also comes with a problem that the username password generally expires after some time as per security policy and you have to change the username password for the FTP server as well as in File adapter which you are using.But this problem can be solved by going for a permanent username and password.
    I would recommend you to go for Proper user name and password.
    Regards
    Ravi Anand
    Edited by: Ravi Anand@85 on Mar 12, 2010 7:56 AM

  • Anonymous login in sender,reciever file adapter

    hi all xi's
    i dont know what is the need of anonymous login option in sender,reciever file adapter and the other thing is if i use check anonymous login there is no option for
    specifing username,pwd,ftp server ip.
    early anser will be appreciated.
    bye.
    regards.
    seeta ram.

    Hi,
    when you configure your FTP server you can opt for anonymous login.
    It means anyone can log on to this server just by using the IP address.
    No user creation.. so ..No need for user id or pwd. i mean no authentication.
    FTP connection parameters.. i.e. server n port will always be there if you are going for FTP.
    It wont ask for these if you select NFS.
    Being Anonymous only removes the user id n pswd option.
    Anonymous login is "Never suggested"..Pretty insecure..
    Dont forget to award SDN points Seeta.
    Regards
    Pushkar
    Message was edited by:
            pushkar anand

  • Anonymous login

    Hi,
       I created a Anonymous user and add it in UME as it was mentioned in the Anonymous Logon creation guide. Then i assigned a new desktop and role which i created and meanwhile i redirected the URL to "com.sap.portal.navigation.portallauncher.anonymous".
    Now when i try to check I get error that " No portal roles are assigned for this user.If this problem persists, contact your system administrator."
    I checked the UME tool in portal and try to look at the property "ume.login.guest_user.uniqueids" and found out that it is always shows default "Guest" user but I have assigned another user in UME through "Visual Admin" tool.
    is this normal behavior or this is the reason why my Anonymous login is not working.....
    Regards
    Yasir Noman

    Hi Yasir, have you created an anonymous user ?
    the steep are this:
    1.- create anonymous user and add it in the anonymous group
    2.- add it in system admin - system config - UM configuration - direct editing- ume.login.guest_user.uniqueids
    3.- Create desktop and role
    4.- assign permissions to anonymoys access to both
    5.- configure rules in System admin - Portal display and
    portal administrators - super_admin
    You need to appoint this desktop to this user
    6.- if you don't have configured this user as "default anonimous user" you need to add "&j_user=user" int the link.
    Regards.

  • Use ZBEX Anonymous Login Service in BIApplicationFrame in ABAP Web Dynpro

    Hello,
    We created a ZBEX Service as an alias of the BEX Service as per SAP OSS Note 516884 to allow users to anonymously access BW reports.
    Now we want to embed the BI Web Application in an ABAP Webdynpro as a BIApplicationFrame.
    Note that the ABAP Web Dynpro is on the SAP R/3 ERP side while BI is a separate BW instance.
    The problem we are facing is the standard BIApplicationFrame element uses the SAP standard BEX service when it forms the URL and we do not seem to have a way to make it use the ZBEX Anonymous login service. Hence it always asks for the logon screen defeating our purpose.
    Has anybody done been able to make the BIApplicationFrame use ZBEX service and if yes, what is the solution to this problem?
    Thanks and regards,
    Atul Kulkarni

    Hi Ankur,
    Someone will somewhere call the EJB (not: "Java Bean"!). As an EJB isn't part of a request/response cycle but mainly thought for business logic, it is of course the task of the calling component to deliver the user (his logonID for example) to the EJB.  There is not other way!
    Hope it helps
    Detlev

  • FTP adapter settings for Anonymous login

    Hi All,
    Can any one tell how to configure the oc4j-ra.xml under the FTP adapter as i am using FTP adapter which did not have any login credentials(Anonymous login)
    Thanks andRegards,
    Nagaraju .D

    Hi ,
    I have an FTP server which dont require any credentials when i using the settings i am leaving blank for username and password then it is throwing runtime error
    Thanks and Regards,
    Nagaraju .D

  • Anonymous login doesn't show user login channel

    Recently i am doing some R&D work on portal server. Whenever the user logs in to portal server, it will bypass the authentication menus and login as anonymous user because i have set in the admin console to disable all the authentication methods except anonymous login. In order for the user to login again using membership login inside the anonymous login, at the advanced option under "Non Interactive Mode", i added "membership" as one of the variable. Now the problem comes when i added in a generic provider into my channel.I can't see the user login channel anymore whenever i log into the anonymous page. I have uncheck "the persistent cookies" at the advanced option in admin console but the problem still persist.Even if i never log in using the login channel at the anonymous user page, it will display "welcome new user" and bypass the page with "login channel". I hope you guys understand my question. :). Anyone out there knows what's going wrong here?

    Make sure the iwtLoginProvider is present in the selected channel list for the anonymous user.
    Go to the anonymous user profile /Manage_Domain/Role/Users and then anonymous user profile and check to see if you have the iwtLoginProvider added in your list of available and selected channels, if it is not present you have to add it.
    Below the available channel list box
    type iwtLoginProvider in the Channel Name text box. For the Class Name text box, type: com.iplanet.portalserver.providers.login.LoginProvider
    Click the add button
    Now move the channel to selected channel list and then click the submit button in the bottom of the page.

  • Tnftpd anonymous login

    Hi,
    It appears the tnftpd server as supplied with Tiger Home version has anonymous logins disabled by default, as I cannot do an anon login.
    Reading through the ftpd and ftpd.conf man pages seems to imply anonymous login is enabled by default and so therefore there is no explanation as to how to enable anon logins via any config file/startup option.
    Does anyone know how to enable tnftpd to allow anon logins please?
    TIA.
    PowerMac Gigabit Ethernet G4   Mac OS X (10.4.8)  

    Hi,
    this is a guet User ID
    the anonymous login will use to have User ID as "anonymous" and enter the password as anything (any password will work).
    this will always have guest permissions and will not be able to temper any of the data without permission.
    the administrator can assign the required permissions and roles to this user ID.
    Thanks
    Swarup

  • Anonymous login failed [solved]

    pacman -Syu gives...
    error: anonymous login failed
    Control socket read failed: Success
    I tried commenting out the nethat line in /etc/pacman.d/* and rebooting but still get the same error.
    Last edited by tony5429 (2007-06-09 15:07:14)

    Snowman wrote:
    Agent69 wrote:So this is a server issue?
    yes.
    iam having the same problem with the extra server and my pacman.conf file uses this line /etc/pacman.d/extra how can that be wrong ? please help me ..

  • Where to modify anonymous login channel?

    Hi,
    Q1. I know we can modify the anonymous login channel as I manage to do it for all the others but for the login, I can;t seem to find the Login folder as mentioned in the docs. i am using portal 6.2 (JES 2004Q2).
    Also the doc says not to modify LoginProvider so how to I modify the login channel when I go to http://<machine name><domainname>/portal/dt
    Q2. Next the header.jsp for anonymous login can be changed in the /etc/opt/SUNWps/desktop/anonymous/JSPTabContainer/header.jsp however the search component is "included" as a code "searchbox.jsp". Where is this searchbox.jsp? I tried modifying all the searchbox.jsp in sampleportal directory, default directory and even my own directory created by "cp --rp" from sampleportal but still cannot see the changes reflected. Any idea?
    Please help.

    Adam,
    Would you consider the SAP classes for J2SE and J2EE a good place to begin learning how to work with the CRM2007 package?  We're likely to be upgrading late this year/early next and I need to get up to speed on how to do the ISA UI work.
    To this point I've just used Dreamweaver on the .jsp's and it's worked well enough if a bit cumbersome.
    I've been trying to teach myself the NWDS, but need to dedicate more time to it than I've had the past couple months.

  • Active LDAP with Anonymous login

    hello all,
    We are using LDP as a method to authenticate users.
    How can we set up the Active LDAP with Anonymous login .
    Thanks in advance.

    It's not clear what you want to do.
    Do you want to set up LDAP for authentication?
    Or
    Do you want to set up a custom authentication scheme that tries to authenticate via LDAP and if unsuccessful, logs the user in as an anonymous user?

  • Regarding Anonymous Login

    Hello,
       I have a installation of only the portal (no WAS or J2EE engine other than that for the portal). I need to set up the portal for anonymous login. The Secuirty guide talks of making changes to the sapnum.properties file, unfortunately I cannot locate the file in the whole installation directly (ie under the 'usr' directory and its sub-directories).
       I am using EP 6.0 on MS SQL.
       Could you please help me set up the portal for anonymous access?
    Thank you.
    Regards,
    Vivek

    Hello Daniel,
       Thank you very much. That path showed me the file but unfortunately the portal gives a runtime error when I try to save the changes. Fortunately, there was already a login id 'Guest' which I could use. Could you tell me the exact location of the physical file?
       I have one more problem. I tried to edit the index.html file in the path .../cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root .
       The file had the line
    <body onload="location.replace('portal' + document.location.search)">
    which I replaced to my new portal launcher page
    <body onload=location.replace('servlet/prt/portal/prtroot/pcd!3aportalcontent!2fSRM_Team_page!2fiViews!2fanonPortalLauncher' + document.location.search)">
    after restart of the portal server
    but when I tried with the url
    http://<server>:<port>/irj/index.html
    it shows me the logon screen and when I tried the url
    http://<server>:<port>/irj/index.html?j_user=Guest
    it shows me a portal runtime exception that the portal iView is not found.
    What is the mistake I am making?
    Thank you.

  • Allow anonymous login

    Is it possible to allow anonymous login but disallow anonymous searching.
    If its possible some direction how to achieve it.
    Appreciate any input.
    Thank you

    Rather than adding a Deny ACI, you should search for the ACI that is granting Compare, Search rights to anonymous users, and remove the operation that you do not want to grant (compare in the example mentioned).
    Example : Transform
    aci: (target ="ldap:///dc=example,dc=com")(targetattr !="userPassword")(version 3.0;acl "Anonymous read-search access";allow (read, search, compare)(userdn = "ldap:///anyone");)
    Into:
    aci: (target ="ldap:///dc=example,dc=com")(targetattr !="userPassword")(version 3.0;acl "Anonymous read-search access, but no compare";allow (read, search)(userdn = "ldap:///anyone");)
    Ludo

  • Problem in Portal Anonymous Login..Please guide

    Hello All,
    Am trying Portal Anonymous Login using EP7 SP9 Sneak Preview.
    Using link for this - http://help.sap.com/saphelp_nw2004s/helpdata/en/1e/e19f58136e654d9709befa464314f2/frameset.htm
    1. Have added 2 users in the UME Property using configtool - anon1,anon2
    2. Created a simple PCD Role and assigned a URL iView to it. Changed it authenticationscheme property to Anonymous.
    3. Assigned this role to Anonymous Users Group.
    Problem:
    1. When I access URL http://rp1677:50100/irj/portal/anonymous, am asked for authentication? Why?
    2. The anonymous user group contains user Guest. When am trying to add users- anon1 & anon2 into this group, I get an error saying - <i>You are not authorized to assign one or more entities. Perform a new assigned entities search to see the correct status</i>
    Am doing this entite process using the administrator login.
    Please guide.
    Awaiting Reply.
    Thanks and Warm Regards,
    Ritu

    Hi,
    There is a step by step guide to implement external facing portal in
    <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5894">blog</a>
    Follow all above steps and if you still get error write here again.
    Regards
    Abdul.

  • Anonymous Login in EP6.0 SP2....Please Help

    Hello,
    I am currently working on SAP Enterprise Portal 6.0 SP2.
    I am trying to create anonymous content using Simple Anonymous Logon method (i.e without using any logon ticket).
    As per the instructions given in help.sap.com, I tried the following steps:
    1. Created a new Portal Launcher iView
    2. Also created an iView containing some data (text).
    3. Set ume.login.anonymous_user.mode = 0 (where 0 is for simple anonymous logon & 1 for named anonymous method).
    4. Have replaced the previous path in <b>location.replace</b> with the current path of (my) portal launcher iView, using the syntax as given in help (: replaced with !3a and / with !2f).
    But this did not work.
    5. Then, replaced the above given path in <b>location.replace</b> with the path of my another iView containing data (mentioned in point 2), but this did not work either.
    In either of the above steps (4 & 5), I dont get an error but receive the same loginpage as before.
    Dont understand whether it has worked or not...Cant find any difference....?
    Am I missing any step(s) here.....?
    On discussing the same with my collegaue, he said that I have to follow the steps with point 4.
    If this is so, kindly let me know how can I customize anonymous/static data for this anonymous login?
    Do I need to customize some code in the my Portal Launcher iView....?
    Please help me.......
    Thanks and Warm Regards,
    Ritu R Hunjan

    Solved on my own

Maybe you are looking for