SUS Material PO for EBP-SUS scenario

Hi All,
We are planning to implement EBP-SUS scenario for PO.
My Question is Can we use EBP-SUS scenario for material PO,POR and ASN
in extended classic mode.
Please help.I need this info urgently.
Also if anyone has config settings document for this scenaio then I would appreciate
if they can share with me Priyasinghsap  at gmail
Thanks in Advance.
Regards,
Priya
Edited by: priyasinghsrm on May 23, 2010 11:20 PM

As far as I know, extended classic senario is not supported in SUS, only the following senarios is supported.
1) SUS-SRM ( In this case, SRM should be local.)
2)SUS-MM(R/3) (Only separate ERP system)
Because, in extended (classic) , there're over  ERP/EBP systems, when post confirmation, system might have problem,
Eventhough, some customers is using, but this senario is not supported and customer need modification to archive this.
The SUS-EBP (service procurement) and SUS-MM (plan driven procurement) can be used only separately but not mixed.
Does anybody have more inputs?
Regards
Lauren

Similar Messages

  • SUS Invoicing in EBP-SUS Scenario

    Hello SRM Gurus,
                                  Due to various business process we will be deploying ECS SRM with EBP-SUS scenario.  We have strong requirement to provide PO invoice and non PO invoices ( eg utilities) via SUS.  I know EBP-SUS scenario is limited to POR, I would apprecite if anyone has implemented invoicing in SUS as people tell me it is technically possible.  If so, please share information.
    -thanks!
    Shilpa

    Hi
    <b><u>Please go through this which might give you some useful details -></u></b>
    In the original business package for SRM 5.0, the two iViews , "Invoice Monitor" and "Setting for Invoice Monitor" , are not included in the content. But for some business cases, these two iView are required.
    To add these two new iViews change the business package content manually as described below in the  Release-Independent SAP OSS Note 928764:
    Note 928764 - BP SRM 5.0: Add two new iViews to standard business package
    Note 543544 SUS: Extended Classic Scenario for EBP not supported
    Note 662077 - No values return for Order/Contract Simulation on Invc Pymnt
    Note 1096691 EBP invoice from SUS in ECS gets 'To Be Corrected Manually'
    Note 1064557 SRM 6.0 SP02: Additional Notes to be applied on SRM Server
    Note 700350 Supplier Enablement: Deployment Scenarios integrating SUS
    Note 1024334 Error when sending invoices to EBP
    Note 947198 IMS monitor: Web Dynpro with hierarchies
    Note 836943 BP SRM 50 Additional Installation Information
    Note 733255 BP Supplier Coll. 60.1: installation information
    Do let me know.
    Regards
    - Atul

  • Note 543544 - SUS: Extended Classic Scenario for EBP not supported

    Hi,
      I am trying to get more information on SUS implemenation with ECS, I am aware of this note 543544 and its limitations for ECS in creating invoices and confirmations. But I wanted to know if any one has implemented SUS with ECS and also created invoices in SUS.
    Please share your ideas.
    Thanks,
    Sreedhar

    Our scenario is, SRM 5.5, ECS, Confirmations and Invoicing in SRM.
    So, I am trying to analyze if MM-SUS or SRM-SUS will be a goo fit for us. But I came across note "543544 - SUS:ECS for EBP not supported" and I am trying to figure out what would be the best way to implement SUS.
    Option # 1: If I implement SRM-SUS - I can do POR, PO changes and all PO related activity without conf and invoices. I am not worried about confirmations, our requirement for SUS invoicing is a must. So is there any way to achieve this as is or with IMS?
    Option # 2: MM-SUS, but how to do this? since the leading PO, conf and invoicing all are done currently in SRM.
    Please share your ideas.
    Thanks,
    Sreedhar

  • Material description in the SUS vendor screen in MMSUS scenario

    Hi All,
    We are working on MM SUS scenario with SRM5.0 and ECC 6.0 as the backend.
    We are sending the PO and SAR from R3 to SUS. When vendor logs in to create a POR and ASN, he is not able to see the material description rather only material code is available in the screen.
    Same thing for the business object BUS2231 (  for ASN) we are able to see the same in BBP_PD in GUI.
    What could be the reason?
    We are using standard BSP pages for SRMSUS service.
    Best regards,
    Sridhar

    Hi All,
    Any clues on this, are we missing any standard jobs which are to be scheduled for bringing material description to the SUS screen?
    Best regards,
    Sridhar

  • Clarifications on EBP-SUS and MM-SUS Scenario

    Hi !
    We are planning to implement EBP-SUS and MM-SUS in one Client . Request you to help us on the following issues.
    1. While the outbound messages will not have a problem from MM & EBP, how do we route inbound messages to MM & EBP effectively. Should be handle it in XI ?? If ues, what is the best criteria .
    2. Since both the config guides for MM-SUS and EBP-SUS scenarios include transactions for transferring Vendor & Comapny Code data, how do we check duplication.For ex : if we transfer a Vendor from R/3 and subsequently try to transfer the same vendor from EBP , is there any inbuilt duplicate check ?
    3. In MM-SUS, an ASN created in SUS creates an inbound delivery is created in MM. What would happen in case of EBP-SUS i.e when an ASN is created for an EBP PO ? We are on extended classic scenario ?
    4.If you do a confirmation in EBP-SUS, will a GR be generated in both EBP and subsequently in MM.
    Request yr help pl.
    Regards

    Hi
    Welcome to world of SRM.
    I guess, you must have got enough details in the SRM guides.
    Anyways, better to understand the basics first,, before going in detail. I hope this will answer all your queries.
    <b>Refer to these links -></b>
    <u>Supplier Enablement</u>
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/cd/0e343e47fd6b2ee10000000a114084/frameset.htm</b>
    <u>SUS-EBP Scenario</u>
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/06/0f343e47fd6b2ee10000000a114084/frameset.htm</b>
    <u>SUS-MM Scenario</u>
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/39/0f343e47fd6b2ee10000000a114084/frameset.htm</b>
    <u>Supplier Self-services</u>
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/25/99b13c48740d55e10000000a114084/frameset.htm</b>
    <u>Procurement</u>
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/8e/e5623c046a9b67e10000000a11402f/frameset.htm</b>
    <u>Users in SRM user Management</u>
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/cd/6313513813554e941a02a91540c29e/frameset.htm</b>
    <b>Please try this SAP OSS notes as well to get System architecture details-></b>
    <u>Note 982871 - Consulting services: supplier integration in SRM
    963000 - Usage and release of SRM as AddOn to ECC in ERP2005
    868192 - Consulting solution: SUS-MM (SUS-MMSRV) service procurement
    573383 - EBP and SUS deployment variants</u>
    <b>Also do read this -></b>
    <u>Check whether the roles delivered by SAP meet your requirements. If not, you can create new roles and assign transactions to them. We recommend that you copy standard roles and tailor them to your requirements.
    All users assigned to a respective role are then allowed to carry out the transactions. If required, you can refine the authorization check on the tab page Authorizations.
    Standard SAP Single-roles
    SAP_EC_SUS_ADMIN_PURCHASER (for purchasing administrators - SAP Supplier Self-Services)
    SAP_EC_SUS_BIDDER (for bidders - SAP Supplier Self-Services)
    SAP_EC_SUS_DISPATCHER (for dispatchers - SAP Supplier Self-Services)
    SAP_EC_SUS_INVOICER (for invoicers - SAP Supplier Self-Services)
    SAP_EC_SUS_ORDER_PROCESSOR (for order processors - SAP Supplier Self-Services)
    SAP_EC_SUS_MANAGER (for managers - SAP Supplier Self-Services)
    SAP_EC_SUS_SERVICE_AGENT (for service agents - SAP Supplier Self-Services)
    If you want to use SAP Supplier Self-Services, proceed as follows:
    1. Select one of the following single roles:
    SAP_EC_SUS_ADMIN_PURCHASER
    SAP_EC_SUS_ADMIN_VENDOR
    SAP_EC_SUS_BIDDER
    SAP_EC_SUS_DISPATCHER
    SAP_EC_SUS_INVOICER
    SAP_EC_SUS_MANAGER
    SAP_EC_SUS_ORDER_PROCESSOR
    SAP_EC_SUS_PRODUCT_MANAGER
    SAP_EC_SUS_SAR_PROCESSOR
    SAP_EC_SUS_SERVICE_AGENT
    SAP_EC_SUS_SERVICE_MANAGER
    2. Choose Change Roles.
    3. Choose the Personalization tab page.
    Note: The personalization applies to all roles, meaning the user can also create his own roles, for example copying the delivered SAP SUS roles. He can tailor these roles to his requirements by changing the SUS-specific attributes (BBP_SUS_ROLE_ATTRIBUTES).
    1. Select the entry BBP_SUS_ROLE_ATTRIBUTES (SUS-specific role attributes).
    2. Choose Change values.
    A dialog box for maintaining SUS-specific roles appears.
    3. If required, perform the following steps:
    If the role should be displayed in the SUS User Management (UM) and should be able to be assigned to the relevant user by the supplier administrator, set the indicator to display the role in SUS UM.
    If the user should be displayed as a service agent for the purchaser, set the Service agent indicator.
    If you want to define the user as an SRM administrator, set the SRM administrator indicator. The user is then authorized to change all supplier data.
    If want to assign the role SUS administrator automatically to the user during registration, set the SUS administratorindicator.
    Sets the relevant indicators if you want users to receive the following notifications: Notification If Purchase Order Not Opened, Notification If Purchase Order Response Is Missing, Notification If ASN Is Missing, Notification If ConfirmationIs Missing, Notification If Invoice Is Missing,</u>
    Do let me know.
    Regards
    - Atul

  • MM-EBP-SUS in classic scenario

    Hi,
    We have classic scenario to be implemeted with EBP-MMsystems.
    Please let me know if SUS is also involved in this landscape to send the PO to the suppliers online what will be the exact process flow
    Can SUS be integrated with EBP in this scenario.
    Pls advise
    Thanks,
    Manu

    Manu
    SAP Note 700350 will provide full details of the restrictions between the various SRM deployments and SUS.
    In summary the procurement of materials in SRM-EBP with SUS integration is supported, (although there is always been some debate about this). The procurement of services is not supported, (unless you are on SRM 7.0 ramp-up), as it is not possible to replicate a SUS service confirmation back to SRM-EBP. SAP Consulting will provide a custom solution to overcome this restriction for a price, SAP Note 868192 describes.
    Remember you will need to install and deploy XI to use SUS.
    SRM 6.0 onwards only supports PI 7.1 not XI.
    Regards
    Mike

  • EBP SUS scenario ---sending a PO output from EBP to SUS

    Hi All,
    We are working on EBP SUS scenario with SRM 5.0 and ECC6.0 as the backend.
    We are creating a PO in the EBP which is to be sent to SUS for creating a POR in SUS from vendor.
    1) How do we configure the PO output from EBP to SUS system?
    We could see one method call in Set output actions and output format for sending XML purchase orders. How do we configure this to send it to SUS.
    2) Is it possible to have EBP and SUS in one client where from we will create a PO and send it to SUS?
    Thanks in advance.
    Best regards,
    Sridhar.

    hi,
    there is one customizing setting available --> you need to set this in your SRM system
    transaction --> spro ---> supplier relationship Management --> SRM Server --> cross application basic settings -->
    Set output actions and output format --->Condition dependent document output
    in this setting select --> purchase order ---> you can see four actions --->
    for the last action --->Method call ---> Time of processing ---> should be -->Processing when saving document.
    2) it is possible to have SUS and EBP in same client.
    You can refer to few notes available on service market place.
    ---> it is not to be used for productive use --> only for demo purpose.
    one thing i remember is --> the system type in the scenario is EBP_SUS ( One client EBP and SUS )
    Edited by: khan voyalpad usman on Feb 19, 2008 12:59 AM

  • Item level attachments in confirmation sent from SUS in EBP-SUS scenario

    Dear colleagues,
    I am in SRM 5.0
    In an EBP-SUS scenario, I have created a Confirmation for a Purchase Order with an attachment added at header level of confirmation as well as item level of confirmation and sent to EBP.
    The XML that reaches EBP has both the attachments but effectively the confirmation that gets created in EBP has attachment only in header level and the item level attachment is missing.
    Could any of you with your experience let me know whether it is a limitation or is it possible to send attachments in item level to EBP?
    Many thanks.
    Best regards,
    Srivatsa Ganesh V
    SAP Labs

    vatsa,
    if the xml message has both the attachments , then it is a problem.
    please debug the inbound of xml , it is very easy to find out whether both the attachments are considered in the creation of the document.
    use transaction sxi_support and the inbound xml for debugging.

  • We are use EBP-SUS scenario, WF is not steady

    We are use EBP-SUS scenario, there are 1% POs will be awaitting approval even we configured PO WF as non-approval for PO.
    Additional, we use start condition for non-approval PO type, almost POs is OK, but still 1% POs is error with wrong status even it is non-approval PO type.
    Who can tell me why it caused?
    Thanks very much!

    the search result is differrent with the other WI, only have 1 record as below:
    635804     (子)工作流      中文     PCO 编号 3000001158, GUID 49A68A6351D700CDE10080000A100649 的自动转换
    the english text as below:
    635804     Sub workflow      english     PCO  3000001158, GUID 49A68A6351D700CDE10080000A100649  automatically convert

  • PI mapping content for MM-SUS scenario?

    Dear Guru's,
    We are configuring MM-SUS scenario with SRM on 7.01 and ECC 6 ehp 5 and PI 7.02. While configuring the PI scenario for the above integration, we are not finding the required mapping for the purchase order output from the ECC side  in the PI scenario.
    We have imported XI Content for SRM SERVER 7.01, SAP APPL 6.05, SRM SERVER IC 7.01. Aprat from this any other XI content needs to be imported into PI SLD ?
    For the interface PurchaseOrderERPRequest_Out_V1 from MM to SUS, do we required to do the PI mapping manually or any XI standard content is available. If so, please help me with the Content Details.
    Thank you.
    Ranjan

    Dear Nikhil,
    As suggested by you earlier, we have imported the content for the integration scenario 'SE_SERVICE_PROCUREMENT' and we have found all the required content. Only thing missing is the mapping for ERP PO REQUEST OUT in the PI content.
    I am wondering whether SAP is not giving the standard content and we need to develop our own content for mapping or there is a direct call in place.
    Anybody who has used the scenario, what was the approach? or is there anything we are missing?
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

  • Query involving XI 7.0 (PI 7.0) on SAP SRM 5.0 (EBP - SUS Scenario)

    hi,
    I am currently working on SRM EBP-SUS scenario which makes use of XI 7.0.
    while reading through the posts on this scenario, prior to XI 7.0,mapping content had to be imported into XI repository.
    as per XI 7.0 is it required to import the mapping content into IR or it is already shipped into IR.
    any help is appreciated.
    thanks in advance.

    Hi,
    If you export the mapping content in previous version then that can be imported into IR, in MM ctrShift0 then you will get on window ther you can import the mapping .
    Is this your requirment?
    Regards
    Chilla

  • Confirmations/Invoices in EBP-SUS scenario

    Hi,
    We are upgrading from SRM5.0 to SRM7.0. We are in extended classic scenario and would like to use EBP-SUS. Full functionality of SUS is not supported in EBP-SUS. Only order response is supported in standard EBP-SUS scenario. But we heard that it is possible to enable Confirmation/Invoices in EBP-SUS through BAdI and PI mappings. Has anyone done this before. If so could you share the procedure to enable the confirmations/invoices in EBP-SUS and any limitations on the functionality (like invoice reversals ..etc)
    Thanks
    Sukumar

    Hi Yang,
    In EBP-SUS or commonly SRM-SUS scenario , vendors are replicated to the SUS system automaticallywhen you create them in SAP SRM using manage business partners web transaction. Ensure that you select the "Portal Vendor " checkbox while creating the vendor.
    before that please  replicate company data to SUS using tcode BBP_SP_COMP_INI.
    Also i believe you must have created vendor org structure in the SUS client.
    Cheers
    Iftekhar Alam

  • Settings for Purchase Order output using services for MM-SUS scenario?

    Dear Gurus,
    I am configuring the service procurement classic and plan driven procurement for MM-SUS
    environment. We are on SAP SRM 7.01/ECC 6 EHP5.
    I need to maintain the below settings for PO output:
    1. RUN transaction SWETYPV
    2. IN the object types field, enter CL_SE_PUR_WF_OUT.
    3. In the event field, enter CREATED.
    4. In the receiver type field, enter WS53800008.
    5. In the receiver function module field, enter SWW_WI_CREATE_VIA_EVENT_IBF.
    6. Select the 'Linkage Activated' checkbox.
    7. Save your entries.
    Similarly, one more entry for the event CHANGED.
    However, the system is not allowing me to save the settings.
    If I choose BOR Object Type 'CL_SE_PUR_WF_OUT', it gives an error message 'Object type CL_SE_PUR_WF_OUT is not defined'.
    If I choose object category 'Business class for object type CL_SE_PUR_WF_OUT, it gives an error message 'Class CL_SE_PUR_WF_OUT is not a business class.'
    There are similar entries in the table SWETYPV for object type CL_SE_PUR_PO_WF_OUT' with object category CL.If we copy the entries and tries to replace the
    object type 'CL_SE_PUR_PO_WF_OUT' with CL_SE_PUR_WF_OUT and save it, it gives an error message 'CL is not used for workflow event'.
    Could you please help me on how to configure the settings for PO output from ECC system using services?
    Any input is highly appreciated.
    Thanks and regards,
    Ranjan

    Hi Ranjan,
    Please add the value 'CL' in the table SWF_CATIDS
    Then it will work.
    With Regards,
    Malay

  • MM-SUS Functionality in EBP-SUS

    Dear SRM Gurus,
    We are working on SRM 7.0, Extended Classic Scenario.  The SUS Scenario that we will set-up is EBP-SUS.  However, there are functionalities in MM-SUS that the client requires as well.  How do we set-up the following:
    1) whenever Goods Receipt is done in ERP, can we pass the update data from ERP to SUS?
    2) whenever an Invoice Entry is done by the Vendor in SUS, can the receiving party to accept/ reject the invoice be an ERP user (not SRM user)?
    Thanks!

    hi,
    for #1, the scenario will be EBP-SUS/ Extended Classic.
    In this case, the vendor will be creating the goods receipt in SUS if the item is a non-stock material.  However, the client will be creating goods receipt in ERP if the item is an inventory material.  ALthough we are in the EBP-SUS/ Extended Classic, the client still prefers that goods receipt for inventory material be in ERP so that movement types may be defined.  At the same time, the client requires that this GR entry in ERP will update the document in SUS.
    Is that kind of design possible?
    for #2, the scenario is stil EBP-SUS/ Extended Classic.
    However, the invoice will be done in ERP.  Can this invoice entry be reflected in SUS?

  • Is both MM-SUS & EBP-SUS possible at a time ?

    Hi Gurus,
    SUS will be one of the most requiered functionality for Client and all POs need to send to Suppliers via SUS.
    We are mainly going to use Classic Scenarion ,where MM-SUS  fits perfectly. But at the same time Direct Materails ( Manually or automatically thru PDP as ext Req) will trigger Extended Classic Scenarion, as per SAP standard setting , although we configured all prodcut cat for Classic.
    So how we can send these POs ( genreted through Ext Classsic) to Suppliers ? Can we set both  MM-SUS & EBP-SUS at atime for all suppliers ,so that all orders will go to supplieres or any workout/option availble so that I will use only MM-SUS ?
    Plz help me.
    Regards
    NAP

    really  i dont know why SAP did not do anything for direct material PO in ECC itself.
    since many issues and customers are not happy some customers wanted to haveall  their PO in only ECC box  though direct or indirect material.
    SAP has to do something on this direct material po in classic mode . i dont know what type of technical snag there are having to do the same.
    Narendra:- Do some custom enhancement to clear the account assignment in the BADI so your sc for direct material will be created in ECC only not in SRM ( clear account assignments) .
    customer expectations are PO in ECC only for all materials in classic scenario without doing any enhancement.
    not applicable for you /fyi
    Note 1293572 - Account assignment is cleared in case of direct material
    When a material in purchase order is ordered as direct material, then default account assignement is cleared even though the customizing for accounting is maintained for the direct material in case of government procurement.
    Muthu

Maybe you are looking for

  • Easy and fast building for multiple sites

    Hi all, my first post. So, I've got a lot of sites but right now I am working on about four main ones - all commercial. In the past I had a webmaster but for the short-term and until my company is stronger financially I'm taking on the building again

  • Making disabled links appear like textview

    Hi there, I have to display a combination of links and textviews in the same column within a table.  Because I cannot intermix cell editor types in the same column, I have to disable the links in order to achieve this.  The issue then is, my disabled

  • Populating a dropdown list box from from a RFC/web service call

    Hello All,   So far all the samples that I have on dropdown listboxes pulls their values from the Simple Type Enumeration table. Howvever, If i will like to populate the dropdown listbox with returned values from an imported model, does anyone have a

  • Why won't Web Proxy Admin Service start on Win Server 2008 installation?

    Hi, I've just installed Sun Web Proxy 4.0.13 on my Windows Server 2008 box. I cannot get "Sun Java System Web Proxy Server 4.0.13 Administration Server" to start, it fails with the following event messages: In Application logs i get: "+The descriptio

  • Rename "About results: NN"

    Hey guys! I've run into an issue with native sharepoint translation. We have a search results web part with results counter enabled. In English refiner should show "Results: 7" or " About results: 200". In our language it is translated using Bing (i