Sustain pedal not working with some es2 instruments

the sustain pedal works with some es2 instruments and not others.  is there a filter setting where it can be turned on and off?
thank you

Some instruments never had sustain pedals, Organs, Clavinet...etc
Which ones aren't working.

Similar Messages

  • Sustain pedal not working with my MIDI setup

    So, I'm using a Yamaha P-140 hooked up with my Macbook Pro using a Midi-USD cable. I'm mostly using it for Logic Pro X and Sibelius, and it works just fine. However when I use the sustain pedal, it's playing an E3 note and it's messing up all the sound adding a lot of reverb.
    Now, this isn't a problem when I'm using the piano as it is. It's also not a problem with either Logic or Sibelius, cause when I'm testing it with the "Sound and MIDI Setup" app on Mac, the sustain pedal is recognized as one of the "hammers" on the keyboard.
    I have no idea as how to fix this problem, and it's really annoying having to play super legato when I'm recording.
    Thanks in advance.
    Note: The keyboard have an "AUX Pedal" input and a "Sustain pedal" input.
    USB MIDI Cable specs:
    (As written on the package)
    - Built-in driver
    - USB powered and Class Complaint for true plug & play. Just connect to a computer USB socket for automatic installation of the driver.
    - 1 in + 1 out MIDI interface; 16 MIDI input channels & 16 MIDI output channels
    - LED's indicate power on, MIDI in signal and MIDI out signal.
    - Supports Windows XP, Vista and Mac OS X operating systems
    Aditional info:
    Now, I've seen the event-recording in Logic for when I use the pedal, and it's picking up 2 different signals. The first one is a "Controller" (as it say under "status") with the info "Sustain", the next 2 have the status "Note" each one triggering an E3.
    I looked it up and the pedal is a Yamaha FC3 half damper sustain pedal. I'm not an expert when it come to pedals, but I believe a half damper is a pedal with multiple trigger points? Giving you different amounts of sustain depending on how much you're "pressing it".
    (Position 2 1 1  19 = pedal release)

    Try deleting Logic's preferences... sounds like a control surface issue.
    Delete the Logic 10 preferences file AND the shared control surfaces file.
    In the Finder, choose Go > Go to Folder from the menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the  com.apple.logic10.plist  file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro User Manual for details on how to do this.
    If you are having trouble with a control surface in Logic Pro.
    then delete the com.apple.logic.pro.cs file from the preferences folder.
    Note: Delete both files, they will be rebuilt the next time Logic runs.

  • Genius not working with some songs

    why does genius not work with some of my songs?

    For songs which the genius can't come up with a play list it seems the artist is either too small, too new, or the metadata doesn't match. For example, I had "Cardigans - Love fool" selected and I noticed iTunes had it in my "Songs your missing". I changed it to "The Cardigans - Lovefool", and then selected "Update Genius". After this iTunes removed it from the "Songs your missing", and was able to create a playlist.
    The problem is I don't know how many songs iTunes can't figure out. I wish I could create a smart playlist of all the songs which the genius couldn't figure out. The problem isn't so much that I can't get a playlist from a song I selected, but I know if the genius skips a song, then it won't include it with other recommendations. While the genius feature is great, I'd hate to find out in six months that it's been ignoring 75% of my library.
    In order to get some of my indy music to play with the genius playlist, I create a smart playlist which includes a genius playlist, and then a list of artists which it can also choose from.
    While it's great that the genius can figure out information from the cloud, it could spend more time looking at patterns within your own library. If I create a playlist of New Jersey rock bands, it should be able to figure out that my indy artists are related to the mainstream artists in the same playlist.
    The good thing about the Genius is it understands that people listen to multiple genres. I like to listen to classical when I'm studying, and folk music when I'm surfing the web. Last.fm will create a recommended playlist of half classical and half folk. The genius doesn't look at your whole library and come up with something that tries to match all your tastes. As a result of it using genres to cluster music, it doesn't mix holiday music in with your playlists like other recommendation services do.

  • My DVD player does not work with some DVDs

    My DVD does not work with certain DVDs.  Do I need to get it replaced or is there some other problem.

    Could it be that they're out-of-region DVDs? Which model MBP do you have (15" late 2011, for example) and which version of OS X are you running?
    Clinton

  • IMessage not working with some contacts

    I have ipad2, iMessage not working with contacts except between my son and my iPad.  Get a red exclamation mark and send button is greyed out.  Have rebooted, reactivated apple id and email address.  Running latest software. Can anyone help please.

    Imessage only works to other folks who have a device on ios5, and who have activated i message.  In their set up, theyndeclared one or more specific 'receive at' addresses.  Are the folks you are trying to reach on apple devices with i mesage?  The red exclamation means, i think, that the apple server did not find that address as registered.

  • Why the iPad internal speakers not working with some applications and key sound?

    My iPad1 ' internal speakers not fully functioning. It is working with music and video, YouTube , but not working with applications such as games.
    Also with key pad sound .
    Please help me in this regard.

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • Sustain Pedal not working when recording with software instrument piano

    I have an M-Audio sp-2 sustain pedal going into an M-Audio Keystation 88es, which is connected by USB to my mac. When I'm recording and holding down the sustain pedal, the sustain is working properly. However, when I playback what I have recorded, the sustain is gone and it is just the regular piano key notes with no sustain. Does anyone know what the problem here is?

    This appears to have been a bug. After restarting the computer the sustain recording is functioning normally now.

  • Sustain pedal not working in Mainstage only with Kontakt 4 plugin

    I can't get Kontakt 4.0.2 to sustain notes when instantiated in Mainstage.
    The sustain pedal works fine for Kontakt in stand alone mode, and for the same patch/channel strip in Logic 9, but not when in a channel strip in MainStage.
    I have the pedal mapped properly (same channel, same keyboard selected, same channel selected on Kontakt plugin), since all other patches work fine with said sustain pedal in Mainstage... except for the Kontakt samples.
    I have tried a different controller with a different sustain pedal (again, properly mapped and channel synchronized- same channel on controller, pedal and Kontakt interface), and the same thing occurs.
    I have gone into the "wrench" area of the Kontakt plugin/instrument options/controller/MIDI controller #64(Sustain Pedal) acts as". I have set this to both Pedal + CC, and Pedal w/o CC and restated Mainstage on both occasions.
    Neither setting works. Again, the same settings work fine within Logic (i.e. the sustain works). I have the pedal mapped to the right keyboard and to the same MIDI channel in Kontakt, and I can see it respond on the Mainstage interface; in fact, I can play the patch fine; it just doesn't sustain!
    An interesting thing is that when I press the pedal, I can see a MIDI message on Mainstage but not in Kontakt.
    Have you come across this issue before? Any ideas on what's going on and/or fixes?
    Thanks.
    This is the NI reply:
    David Das
    Moderator
    Join Date: Apr 2006
    Posts: 3,179
    You shouldn't have to assign it in Kontakt -- it just works. I would delete that.
    A key indicator is that when you press the pedal, the MIDI message does not appear in Kontakt. That tells me your problem is in MainStage -- for some reason MainStage is intercepting that MIDI data. Therefore, the problem's not inside Kontakt's edit mode. It's somewhere in MainStage.
    Sorry I can't be of more help but at least that narrows it down.
    www.daviddas.com
    My reply:
    By the way, if you want to instantiate a Kontakt 4 patch within Mainstage, you have to create a keyboard surface in Layout mode, then assign it and map it to the keyboard you want to play that channel strip with in edit mode. If you don't map a sustain pedal object, Mainstage doesn't receive its message; therefore I am confused when you write: "You shouldn't have to assign it in Kontakt -- it just works. I would delete that."
    The keyboard is mapped correctly, since I can play the Kontakt patch fine. Both wheel controllers and the sustain pedal are not getting midi data into Kontakt. As I said, everything works fine in Logic with the same set-up; so I agree, it has to be something I am missing within Mainstage...I just don't know what it is!
    Has no one else had this issue on this forum?

    Personally I don't think that's a solution and may not change a thing. Logic probably recognized the Akai and tried to use a stock Controller Assignment.
    It's easy enough to try this without deleting the file I mentioned.
    With Logic running, go to the far left Logic Pro menu, go the Preferences>  entry down near the bottom is Control Surfaces. You can Bypass, Rebuild or check what is assigned there.
    Believe me... this is not time and trouble... had someone more knowledgeable than me about this particular problem answered you, you would've been on your way.

  • Why does my imessage not work with some phones

    Its come to my attention that with some Iphone 4s and Iphone 5 users my imessage as well as facetime does not work. Why is this?

    LilEther wrote:
    Why is this?
    How would we know?  We're not in possession of their or your phone to troubleshoot or see how it's configured.

  • BUG: Dynamic report column headings not working with some templates

    Using Apex 2.0, we are trying to create a vertical report with dynamic labels like &P26_REF_RECEIVED_DATE_L. based on items populated by PL/SQL.
    This seems to work fine for some templates but not for others. With a horizontal report template we get output like:
    <th class="t4ReportHeader" id="REF_RECEIVED_DATE">Received</th>
    <td  headers="Received" class="t4data">29-MAR-2007</td>But with the vertical template we get:
    <th>&P26_REF_RECEIVED_DATE_L.</th><td>29-MAR-2007</td>Also, if we use "default: vertical report, look 1" we see "&P26_REF_RECEIVED_DATE_L." in the output, but with "default: vertical report, look 2" we see "Received".
    Message was edited by:
    Tony Andrews

    have you checked that your report template has a
    valid value for the "Column Heading Template"
    property?This template has nothing in the "Column Heading Template" because it is designed to show the data in this form:
    Heading1 - Value1
    Heading2 - Value2
    Heading3 - Value3
    Hence both the heading and the data appear in the "Column Template 1" property as follows:
    <tr><th class="t3header">#COLUMN_HEADER#</th><td class="t3data">#COLUMN_VALUE#</td></tr>
    Maybe it is an Apex limitation that the #COLUMN_HEADER# value can't be accessed from this subtemplate? Yet somehow it works with "default: vertical report, look 2" (which I realise isn't a template as such).

  • Video chat not working with some people

    Okay so iChat 4.0.7 works fine on my computer with video chat but when I do video chat with some people on my buddy list alone just me and that person I invite him/her and him/her invites me. But it always says to these people:
    "Starting Video Chat" then after that it says:
    THERE WAS A COMMUNICATION ERROR DURING YOUR CHAT every time I do it. Before that it never did this and all of a sudden...? ...makes no sense!
    And it works fine with everyone else. And she's not even blocked.

    Hi,
    Can you send us a copy of the Log.
    It contains several parts
    A Header listening date and such
    A Failure paragraph listing the Error log code.
    A possible long section that looks like repeats about posts and INVITES and such
    Lastly a section starting "Binary Images for iChat" and continues with a list of everything that is started up on you Mac.
    We (I) don't need or Want the last section.
    Old Logs are stored in your Home Folder/Library/Logs/iChatConnectionErrors by date and time
    Expanded Log with Comments
    Not all are this long.
    More Info http://www.ralphjohns.co.uk/page16a.html
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    10:09 PM Thursday; April 16, 2009

  • Shift key not working with some keys

    I am using a MAC Pro with two hard drives.  One runs Leopard and the other MS windows.  while in windows, the birghtness key illuminated (f2 key) and suddenly the shift 2, w, s, x keys quit working.  I decided to reboot and while holding the option key to boot into windows, the system did not recognize the option key and booted me into Leopard.  so now I notice the shift 2, w, s, x, and option key are not working.  Any suggestions?  Also, the brightness icon is still lit up on my screen and I am not able to make it go away or even adjust...

    I'm having this same exact issue. Anyone know of a fix? Is it possible junk in the keyboard?
    I tested my keys using the keyboard viewer, and when I hit function it recognizes it, but it doesn't when it is loading.

  • Project Views not working with some Workspaces

    i have the effect that the project views on some workspaces are not working.
    i can enable/disable >Show Categories< as usual.
    when i enable it the structure of the project looks like:
    myproject.jpr
    |
    +---Sources
    | |
    | +----Miscellaneous Files
    | |
    | +------- all my files not structured
    |
    +---Business Components
    It does not matter what kind of Categories i choose it remains the same.
    In other workspaces on the same System Tab in the same System-Navigator everything works fine.
    any suggestion

    restart jdev didnt help but i
    removed workspace from ide and added the workspace again,
    now working again

  • Safari does not work with some websites

    Allthough Safari works fine with most websites, I recently discovered that with a few it does not work properly.
    With one: http://prive.eneco.nl/ the webside does not recognise my user IDE
    With the other:http://prive.eneco.nl/ it does not load the page after a selection is made
    In both cases Mozilla works fine.
    Is there any body who could advise a solution?
    Thanks

    You can get Firefox 3.6.16 here: <br />
    http://www.mozilla.com/en-US/firefox/all-older.html

  • I downloaded the 3.6.15 firefox, however when it comes up it is 3.6.14 coming up and it does not work with some of pogo games what is wrong

    word womp will not play because it says firefox has a bug in 3.6.14

    Your More system details list shows a Firefox 3.6.14 user agent, so it looks that the update didn't succeed. You can try to update another time.
    See also:
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)

Maybe you are looking for