[svn:bz-trunk] 16395: Bug: #2621264 [Regression] Small messages not working with NIO-HTTP endpoints in LCSD/trunk.

Revision: 16395
Revision: 16395
Author:   [email protected]
Date:     2010-06-02 05:00:56 -0700 (Wed, 02 Jun 2010)
Log Message:
Bug: #2621264 Small messages not working with NIO-HTTP endpoints in LCSD/trunk.
QA: Yes
Doc: No
Checkintests: Pass
Details: This is the BlazeDS side of the fix. This wasn't a regression, it probably never worked correctly. So, in the scenario where there's a Producer and a Consumer, and Producer sends a message for the Consumer, there are 2 messages from the server. The ACK message for Producer's send, and the actual message Consumer receives. I found that the ACK message was in small form, but the actual message was not in streaming messages. This was because we never really tried to convert streamed messages into small messages before.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingAMFEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingHTTPEndpoint.java

Similar Messages

BUG: Verizon iPhone Visual Voicemail Not Working with Ported Number

I ported my number from ATT to Verizon with the new iPhone 5.
Visual Voicemail keeps asking me to set it up with a password. Then it says unauthorized. I spent an hour on the phone with Verizon support. They said I had to wipe my phone and set it up as a new phone.
I backed up, set up as new, went to Voicemail. It called my voicemail. I set up the account, and left a test voicemail. Visual Voicemail worked.
Then I restored back to my iPhone backup, getting all my data, apps, and contacts back, and the Visual Voicemail doesn't think it is setup anymore.
What gives??? Is this an Apple or Verizon issue? It works on a "new" setup phone, not a restored one???

I found that this was an issue (when I setup my iPhone 5) was solved when I went in and reset the network settings.
It seems that somehow the provider network settings weren't quite right:
Settings -> General -> Reset -> Reset Network Settings
After resetting the network settings, everything just worked again.
Perhaps the same thing can correct the issue for you as well. (worth a shot)

BUG: Dynamic report column headings not working with some templates

Using Apex 2.0, we are trying to create a vertical report with dynamic labels like &P26_REF_RECEIVED_DATE_L. based on items populated by PL/SQL.
This seems to work fine for some templates but not for others. With a horizontal report template we get output like:
<th class="t4ReportHeader" id="REF_RECEIVED_DATE">Received</th>
<td headers="Received" class="t4data">29-MAR-2007</td>But with the vertical template we get:
<th>&P26_REF_RECEIVED_DATE_L.</th><td>29-MAR-2007</td>Also, if we use "default: vertical report, look 1" we see "&P26_REF_RECEIVED_DATE_L." in the output, but with "default: vertical report, look 2" we see "Received".
Message was edited by:
Tony Andrews

have you checked that your report template has a
valid value for the "Column Heading Template"
property?This template has nothing in the "Column Heading Template" because it is designed to show the data in this form:
Heading1 - Value1
Heading2 - Value2
Heading3 - Value3
Hence both the heading and the data appear in the "Column Template 1" property as follows:
<tr><th class="t3header">#COLUMN_HEADER#</th><td class="t3data">#COLUMN_VALUE#</td></tr>
Maybe it is an Apex limitation that the #COLUMN_HEADER# value can't be accessed from this subtemplate? Yet somehow it works with "default: vertical report, look 2" (which I realise isn't a template as such).

[svn:fx-trunk] 14719: Bug: LCDS-1522 - RTE running reliable messaging test over NIO HTTP endpoint caused by checkin 272187 .

Revision: 14719
Revision: 14719
Author:   [email protected]
Date:     2010-03-12 02:20:41 -0800 (Fri, 12 Mar 2010)
Log Message:
Bug: LCDS-1522 - RTE running reliable messaging test over NIO HTTP endpoint caused by checkin 272187.
QA: Yes
Doc: No
Checkintests: Pass
Details: Checkin 272187 fixed small messages to work on NIO HTTP endpoints but this exposed a bug in HTTPChannel. HTTPChannel is not supposed to support small messaging feature but there was one place where small messages feature were still being enabled which caused the bug.
Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-1522
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/HTTPChannel.as

[svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

Mac mini late 2012 not working with small VGA monitor

I got a mac mini (late 2012 10.8.4 all updates installed) and it is working fine with samsung b2230 via VGA adapter. There is a small VGA monitor (PL8006 max at 1024*768) which works fine when connected to a PC.
When I connect the small VGA monitor to mac mini it is not displaying anything (monitor shows blue screen with letters VGA so I assue it is not getting any signal). Mac's resolution is set to 1024*768 with 60Hz (even tried with 800*600 without any success). Monitor is also not working with win 7 installed in mac mini using bootcamp.
Any thoughts?

i just found that when the VGA cable of the small monitor is slightly inserted into the VGA adaptor it works fine (this is not usable because there is no way to keep the pins at that level) and when the pins inserted fully / moved little it is not working. Since this happens only between these two devices can't find which one is faulty.

[svn:bz-trunk] 18926: bug fix BLZ-570 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError

Revision: 18926
Revision: 18926
Author:   [email protected]
Date:     2010-12-01 14:07:19 -0800 (Wed, 01 Dec 2010)
Log Message:
bug fix BLZ-570 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError
We put hard limit to the max object nest level to prevent StackOverFlowError. the default max object nest level is 1024 and it can be configured in the endpoint/serialziation section in service-config.xml.
This needs documentation.
Checkintests pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-570
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/io/SerializationContext.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf0Input.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Input.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/AmfIO.java

[svn:bz-trunk] 21394: bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX .

Revision: 21394
Revision: 21394
Author:   [email protected]
Date:     2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
Log Message:
bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
get the sessions id before we invalidate the duplicate session.
Checkintests pass
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.java

For our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more!

[svn:fx-trunk] 7473: Fix for 'ant asdoc' does not work.

Revision: 7473
Author:   [email protected]
Date:     2009-06-01 12:09:26 -0700 (Mon, 01 Jun 2009)
Log Message:
Fix for 'ant asdoc' does not work.
It should now work from both svn and package zip.
Bugs: SDK-15306
QE Notes: None.
Doc Notes: None.
tests: checkintests
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15306
Modified Paths:
    flex/sdk/trunk/asdoc/build.xml
    flex/sdk/trunk/build.xml

Bigger/Smaller Buttons not working in Apple Mail!

Hello All,
I recently used Migration Assistant to move everything from old to new computer.
Everything works in Mac Mail except the Bigger and Smaller buttons for text point size.
I could use Cmmd + Minus/Add signs but miss the button functionality.
Any ideas???
Thank you!

Is the one that doesn't work a layered menu? DVD Player does not work correctly with layered menus, it takes one click to switch to the selected state, and a second click to activate the button.

BUG: Oracle Schema Processor does not work in Servlets

We found a bug with Oracle's Schema Processor. It does not work in Servlets.
When we try to validate a XML document in a Servlet it does not work, but we can execute the same code in a stand alone application and it works.
The following is the code we are using:
try {
File f =new File(filename);
FileReader r = new FileReader(f);
DOMParser dp = new DOMParser();
URL url = createURL (filename);
dp.setValidationMode(false);
dp.setSchemaValidationMode(true);
dp.setPreserveWhitespace(true);
dp.parse(url);
System.out.println("it is parsed");
} catch(Exception e){System.out.println("there is Error"+e.getMessage());}
null

I don't think this is related to Servlets per se.
Check that the Schema processor classes used by the servlet container, and your application are the same.
Java does not have proper versioning of classes, I have seen many applications collapse. People compiled their code on developer machines, where it worked fine, but when moved to a production machine they failed because the production machine had a different version of classes. Usually the name of the class doesn't change, but either a method or a variable is missing in several classes. VM doesn't complain but simply crashes.
In your Schema Processor classes that are used by the servlet engine might be different from the one that the app uses. Do a search on the file system to see how many copy of the same class bundle (zip, jar) you have on the system.

Small Caps Not Working Suddenly

Hello,
I am having problems with a typeface in a pamphlet I am working on. Earlier saved versions of this file are fine, but I'm curious why all of a sudden, my "small caps" aren't working in both Character Styles and toggling the option outside of the Character Styles. It's only happening with the typeface I want to use: Futura Std. If I supplement with Gill Sans, or something, it seems to work fine then. What might cause this, and why would it work in earlier saved versions, but not my new packaged version? It works with my plain "Futura," but not my OpenTypeface "Futura Std." Thoughts?

HI Peter, thanks for responding. I'm working in CC5 and yes, I read Bob's post. I wasn't able to get it work. Additionally, I'm having problems when converting to PDF. In one document the text is fine but when I create a PDF the text gets all messed up, the letters turn into different letters of all different sizes. It's fine when I convert to JPEG.
Alec

New small WIRED keyboard not working with bootcamp

Greetings from Stuttgart, Germany
I just bought one of these new small WIRED keyboards for my macbook pro (early 2008/not unibody).
It's working fine with OSX but not with my bootcamp vista business x64: the fn-key is not recognized. After inspecting the device manager I found out that the keyboard is not recognized as an Apple keyboard like my old one (with numeric keys).
Afer updating bootcamp to version 2.1 I uninstalled the keyboard from the device manager, plugged it in again and it was still not recognized as an Apple Keyboard
Is there a way to manually force vista to use apple keyborad driver? Or is there an update for bootcamp on its way to solve the problem?
Best wishes,
Wolfgang Gross

UPDATE: a possible solution that is NOT working:
in device manager, for both USB Human interface devices associated to the a hardware id (05AC/021E) of the keyboard:
Update driver > browse my computer.. > let me pick.. > show compatible hardware.. > Apple Inc./Apple keyboard 2.1.0..
Doesn't change the keyboard (mis-)behaviour

[Bug?] Defer Panel Update not working when changing scale property

Hi,
I found that Defer Panel Update [when True] does not work properly when changing the scale fit property of an intensity graph.
Try the VI.
When Defer Panel Update is True, and you change the Numeric controls, the Intensity graph is not updated (as expected).
But now change the "Z Scale.Scale Fit" button and.... the Intensity graph is updated (only the Z-color, not the axis).
This looks to be a bug to me!
Nicolas
Attachments:
[Bug] Defer Panel Update not working when changing scale property.vi ‏27 KB

Hi Nicolas,
This indeed looks like a bug. I will do more research on it and file a bug report if it's not already filed. Thank you for posting this information!
Yi Y.
Applications Engineer
National Instruments
http://www.ni.com/support

Need version 3.5.2 as other versions of firefox do not work with yahoo small business website (as of last week).

I use yahoo site solution small business online web tools for 3 websites, they updated the tools and now I can't use their tools. They have told me that I need version 3.5.2 of Firefox and this will work with their site. I have tried to download off mac.oldapps.com but I can't get that version. I did try updating to the latest version of firefox and that doesn't fix the problem with yahoo site solution. Where can I get version 3.5.2?

If you are going to install an older version of Firefox 3.5.*, it would be best to try 3.5.13 which is the latest 3.5 version of Firefox and has the latest security fixes. This is available from http://www.mozilla.com/en-US/firefox/all-older.html
Also see [[installing a previous version of Firefox]], which includes details of how to install any previous version of Firefox.

[svn:bz-trunk] 16395: Bug: #2621264 [Regression] Small messages not working with NIO-HTTP endpoints in LCSD/trunk.

Similar Messages

Maybe you are looking for