Svrmgr30 in Oracle 10g

Is utilities like svrmgr30 available in Oracle 10g? Is there any alternative solution available?
Regards, Anirban

Is utilities like svrmgr30 available in Oracle 10g? In V8 svrmgrl existed & not since then.
Is there any alternative solution available?sqlplus

Similar Messages

  • Error while installing Oracle 10g on Fedora Core 1

    Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
    We have tried by using the on-line procedure and changing the required script to make believe it as said.

    Are you createing DB also???

  • Error while sending a mail using UTP_MAIL package in Oracle 10g

    Hi,
    We are using UTP_MAIL package to send a mail from Oracle 10g.We have follwed the following steps ...
    SQL> connect sys/password as sysdba
    Connected.
    SQL> @$ORACLE_HOME/rdbms/admin/utlmail.sql
    Package created.
    Synonym created.
    SQL> @$ORACLE_HOME /rdbms/admin/prvtmail.plb
    Package body created.
    SQL > alter system set smtp_out_server = '<mail_server_ip:25>' scope =spfile;
    System altered..
    Now we try the code
    begin
    utl_mail.send(
    sender => 'sender's mail',
    recipients => 'receiver mail',
    CC => 'optional',
    subject => 'Testing utl_mail',
    message => 'Test Mail'
    end;
    But we get the following error...
    ERROR at line 1:
    ORA-29278: SMTP transient error: 421 Service not available
    ORA-06512: at "SYS.UTL_SMTP", line 21
    ORA-06512: at "SYS.UTL_SMTP", line 97
    ORA-06512: at "SYS.UTL_SMTP", line 139
    ORA-06512: at "SYS.UTL_MAIL", line 405
    ORA-06512: at "SYS.UTL_MAIL", line 594
    ORA-06512: at line 2
    We also tried connecting to the mail server through telnet .But it is not getting connected..
    Please help us to solve the issue.

    From your own posting you may have the clue, if you try to access your mail server through telnet and it is not successful, it means the service is down or there are networking issues.
    On pre 10gR2 versions there was a bug 4083461.8. It could affect you if you are on 10gR1
    "Bug 4083461 - UTL_SMTP.OPEN_CONNECTION in shared server fails with ORA-29278 Doc ID:      Note:4083461.8"
    This was fixed on 10gR2 base and on 9.2.0.8.0
    ~ Madrid

  • FRM-41211 Integration Error SSL - OracleAS 10g

    Hi.
    I have error Frm-41211 Integration Error SSL Failure Running Another Product error while calling a report from web form in oracleAS 10g.
    I have problem with RUN_REPORT_OBJECT in web forms.
    I have error: FRM-41211 SSL integration error .....
    OracleAS server began on Windoes XP SP2.
    Do you help me ?

    Hi,
    I remember having seen this issue in teh apst. My best recommendation is to work with customer support (metalink.oracle.com)
    Frank

  • Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)

    I'm trying to stop the Enterprise Manager Console by issuing the command:
    ${ORACLE_HOME}/bin/emctl stop dbconsole
    Unfortunately, the command fails to stop the EM Console. Here's the output I get:
    TZ set to US/Pacific
    Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
    Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
    http://<hostname>:5505/em/console/aboutApplication
    Stopping Oracle Enterprise Manager 10g Database Control ...
    --- Failed to shutdown DBConsole Gracefully ---
    failed.
    The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
    Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
    Has anyone else encountered the same condition? If so, what was the solution?
    Here's my operating environment:
    SuSE 9.1 (Kernel 2.6.5-7.108-default)
    Oracle 10g
    Thanks in advance for any help/insight.

    Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
    Sorry, no better clues,
    Toni

  • Migration from Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 Server

    I am working on migrating Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 from Old server to new server. We have db around 500 GB and 3 schemas. I installed Oracle 10G on new server, created tablespaces, schema's blah blah and now doing export and import at schema level from old server to new server.
    Import is taking more than 4 to 5 hours on new server. My manager is saying, window time is bit longer and he wants me to try possiblities to make this process faster. Can some one help me on this, to use the best possible method to complete this process faster?
    Will below step work, if I try?
    If I install, oracle 9i and 10g both on new server in different home directories and take the hot backup from old machine and restore on new machine in 9i home directory and use the upgrade configuration assistant from 10g and do the upgrade? Pls advice.
    Thanks in advance,
    Hari babu
    Edited by: user6367891 on Mar 2, 2010 5:28 AM

    It looks good.
    I have one question in below steps:
    To migrate an Oracle9i or older database to an Oracle Database 10g Release 1 (10.1) database for 64-bit Windows:
    1 Perform steps 1 - 11 in "Migrating an Oracle Database 10g Release 1 (10.1) Database".
    2 Shut down the database on the 64-bit computer:
    SQL> SHUTDOWN IMMEDIATE;
    3 Start the database migration:
    SQL> STARTUP MIGRATE;
    4 Migrate the database as described in Chapter 3, "Upgrading a Database to the New Oracle Database 10g Release" in Oracle Database Upgrade Guide.
    In step 4, it says, migrate database as described in chapter 3. In chapter 3, it says, to do the upgrade the process using dbca or manually. Pls confirm whether do the upgrade process after issuing startup migrate or not.
    Thanks in advance.

  • Oracle 10G New Feature........Part 1

    Dear all,
    from last couple of days i was very busy with my oracle 10g box,so i think this is right time to
    share some intresting feature on 10g and some internal stuff with all of you.
    Have a look :-
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Oracle 10g Memory and Storage Feature.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1.Automatic Memory Management.
    2.Online Segment Shrink
    3.Redolog Advisor, checkpointing
    4.Multiple Temporary tablespace.
    5.Automatic Workload Repository
    6.Active Session History
    7.Misc
    a)Rename Tablespace
    b)Bigfile tablespace
    c)flushing buffer cache
    8.ORACLE INTERNAL
    a)undocumented parameter (_log_blocks_during_backup)
    b)X$ view (x$messages view)
    c)Internal Structure of Controlfile
    1.Automatic memory management
    ================================
    This feature reduce the overhead of oracle DBA.previously mostly time we need to set diff oracle SGA parameter for
    better performance with the help of own experience,advice views and by monitoring the behaviour
    of oracle database.
    this was just time consuming activity.........
    Now this feature makes easy life for oracle DBA.
    Just set SGA_TARGET parameter and it automatically allocate memory to different SGA parameter.
    it focus on DB_CACHE_SIZE
    SHARED_POOL_SIZE
    LARGE_POOL
    JAVA_POOL
    and automatically set it as
    __db_cache_size
    __shared_pool_size
    __large_pool_size
    __java_pool_size
    check it in alert_log
    MMAN(memory manager) process is new in 10g and this is responsible for sga tuning task.
    it automatically increase and decrease the SGA parameters value as per the requirement.
    Benefit:- Maximum utlization of available SGA memory.
    2.Online Segment Shrink.
    ==========================
    hmmmmm again a new feature by oracle to reduce the downtime.Now oracle mainly focus on availablity
    thats why its always try to reduce the downtime by intrducing new feature.
    in previous version ,reducing High water mark of table was possible by
    Exp/imp
    or
    alter table move....cmd. but on these method tables was not available for normal use for long hrs if it has more data.
    but in 10g with just few command we can reduce the HWmark of table.
    this feature is available for ASSM tablespaces.
    1.alter table emp enable row movement.
    2.alter table emp shrink space.
    the second cmd have two phases
    first phase is to compact the segment and in this phase DML operations are allowed.
    second phase(shrink phase)oracle shrink the HWM of table, DML operation will be blocked at that time for short duration.
    So if want to shrink the HWM of table then we should use it with two diff command
    first compact the segment and then shrink it on non-peak hrs.
    alter table emp shrink space compact. (This cmd doesn't block the DML operation.)
    and alter table emp shrink space. (This cmd should be on non-peak hrs.)
    Benefit:- better full table scan.
    3.Redolog Advisor and checkpointing
    ================================================================
    now oracle will suggest the size of redo log file by V$INSTANCE_RECOVERY
    SELECT OPTIMAL_LOGFILE_SIZE
    FROM V$INSTANCE_RECOVERY
    this value is influence with the value of FAST_START_MTTR_TARGET .
    Checkpointing
    Automatic checkpointing will be enable after setting FAST_START_MTTR_TARGET to non-zero value.
    4.Multiple Temporary tablespace.
    ==================================
    Now we can manage multiple temp tablespace under one group.
    we can create a tablespace group implicitly when we include the TABLESPACE GROUP clause in the CREATE TEMPORARY TABLESPACE or ALTER TABLESPACE statement and the specified tablespace group does not currently exist.
    For example, if group1 is not exists,then the following statements create this groups with new tablespace
    CREATE TEMPORARY TABLESPACE temp1 TEMPFILE '/u02/oracle/data/temp01.dbf'
    SIZE 50M
    TABLESPACE GROUP group1;
    --Add Existing temp tablespace into group by
    alter tablespace temp2 tablespace group group1.
    --we can also assign the temp tablespace group on database level as default temp tablespace.
    ALTER DATABASE <db name> DEFAULT TEMPORARY TABLESPACE group1;
    benefit:- Better I/O
    One sql can use more then one temp tablespace
    5.AWR(Automatic Workload Repository):-
    ================================== AWR is built in Repository and Central point of Oracle 10g.Oracle self managing activities
    is fully dependent on AWR.by default after 1 hr, oracle capure all database uses information and store in AWR with the help of
    MMON process.we called it Memory monitor process.and all these information are kept upto 7 days(default) and after that it automatically purge.
    we can generate a AWR report by
    SQL> @?/rdbms/admin/awrrpt
    Just like statspack report but its a advance and diff version of statspack,it provide more information of Database as well as OS.
    it show report in Html and Text format.
    we can also take manually snapshot for AWR by
    BEGIN
    DBMS_WORKLOAD_REPOSITORY.CREATE_SNAPSHOT ();
    END;
    **The STATISTICS_LEVEL initialization parameter must be set to the TYPICAL or ALL to enable the Automatic Workload Repository.
    [oracle@RMSORA1 oracle]$ sqlplus / as sysdba
    SQL*Plus: Release 10.1.0.2.0 - Production on Fri Mar 17 10:37:22 2006
    Copyright (c) 1982, 2004, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL> @?/rdbms/admin/awrrpt
    Current Instance
    ~~~~~~~~~~~~~~~~
    DB Id DB Name Inst Num Instance
    4174002554 RMSORA 1 rmsora
    Specify the Report Type
    ~~~~~~~~~~~~~~~~~~~~~~~
    Would you like an HTML report, or a plain text report?
    Enter 'html' for an HTML report, or 'text' for plain text
    Defaults to 'html'
    Enter value for report_type: text
    Type Specified: text
    Instances in this Workload Repository schema
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    DB Id Inst Num DB Name Instance Host
    * 4174002554 1 RMSORA rmsora RMSORA1
    Using 4174002554 for database Id
    Using 1 for instance number
    Specify the number of days of snapshots to choose from
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Entering the number of days (n) will result in the most recent
    (n) days of snapshots being listed. Pressing <return> without
    specifying a number lists all completed snapshots.
    Listing the last 3 days of Completed Snapshots
    Snap
    Instance DB Name Snap Id Snap Started Level
    rmsora RMSORA 16186 16 Mar 2006 17:33 1
    16187 16 Mar 2006 18:00 1
    16206 17 Mar 2006 03:30 1
    16207 17 Mar 2006 04:00 1
    16208 17 Mar 2006 04:30 1
    16209 17 Mar 2006 05:00 1
    16210 17 Mar 2006 05:31 1
    16211 17 Mar 2006 06:00 1
    16212 17 Mar 2006 06:30 1
    16213 17 Mar 2006 07:00 1
    16214 17 Mar 2006 07:30 1
    16215 17 Mar 2006 08:01 1
    16216 17 Mar 2006 08:30 1
    16217 17 Mar 2006 09:00 1
    Specify the Begin and End Snapshot Ids
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Enter value for begin_snap: 16216
    Begin Snapshot Id specified: 16216
    Enter value for end_snap: 16217
    End Snapshot Id specified: 16217
    Specify the Report Name
    ~~~~~~~~~~~~~~~~~~~~~~~
    The default report file name is awrrpt_1_16216_16217.txt. To use this name,
    press <return> to continue, otherwise enter an alternative.
    Benefit:- Now DBA have more free time to play games.....................:-)
    Advance version of statspack
    more DB and OS information with self managing capabilty
    New Automatic alert and database advisor with the help of AWR.
    6.Active Session History:-
    ==========================
    V$active_session_history is view that contain the recent session history.
    the memory for ASH is comes from SGA and it can't more then 5% of Shared pool.
    So we can get latest and active session report from v$active_session_history view and also get histortical data of
    of session from DBA_HIST_ACTIVE_SESS_HISTORY.
    v$active_session_history include some imp column like:-
    ~SQL identifier of SQL statement
    ~Object number, file number, and block number
    ~Wait event identifier and parameters
    ~Session identifier and session serial number
    ~Module and action name
    ~Client identifier of the session
    7.Misc:-
    ========
    Rename Tablespace:-
    =================
    in 10g,we can even rename a tablespace by
    alter tablespace <tb_name> rename to <tb_name_new>;
    This command will update the controlfile,data dictionary and datafile header,but dbf filename will be same.
    **we can't rename system and sysaux tablespace.
    Bigfile tablespace:-
    ====================
    Bigfile tablespace contain only one datafile.
    A bigfile tablespace with 8K blocks can contain a 32 terabyte datafile.
    Bigfile tablespaces are supported only for locally managed tablespaces with automatic segment-space management.
    we can take the advantage of bigfile tablespace when we are using ASM or other logical volume with RAID.
    without ASM or RAID ,it gives poor response.
    syntax:-
    CREATE BIGFILE TABLESPACE bigtbs
    Flushing Buffer Cache:-
    ======================
    This option is same as flushing the shared pool,but only available with 10g.
    but i don't know, whats the use of this command in prod database......
    anyway we can check and try it on test server for tuning n testing some query etc....
    SQL> alter system flush buffer_cache;
    System altered.
    ++++++++++++++++++
    8.Oracle Internal
    ++++++++++++++++++
    Here is some stuff that is not related with 10g but have some intresting things.
    a)undocumented parameter "_log_blocks_during_backup"
    ++++++++++++++++++++++++
    as we know that oracle has generate more redo logs during hotbackup mode because
    oracle has to maintain the a complete copy of block into redolog due to split block.
    we can also change this behaviour by setting this parameter to False.
    If Oracle block size equals the operating system block size.thus reducing the amount of redo generated
    during a hot backup.
    WITHOUT ORACLE SUPPORT DON'T SET IT ON PROD DATABASE.THIS DOCUMENT IS JUST FOR INFORMATIONAL PURPOSE.
    b)some X$ views (X$messages)
    ++++++++++++++++
    if you are intresting in oracle internal architecture then x$ view is right place for getting some intresting things.
    X$messages :-it show all the actions that a background process do.
    select * from x$messages;
    like:-
    lock memory at startup MMAN
    Memory Management MMAN
    Handle sga_target resize MMAN
    Reset advisory pool when advisory turned ON MMAN
    Complete deferred initialization of components MMAN
    lock memory timeout action MMAN
    tune undo retention MMNL
    MMNL Periodic MQL Selector MMNL
    ASH Sampler (KEWA) MMNL
    MMON SWRF Raw Metrics Capture MMNL
    reload failed KSPD callbacks MMON
    SGA memory tuning MMON
    background recovery area alert action MMON
    Flashback Marker MMON
    tablespace alert monitor MMON
    Open/close flashback thread RVWR
    RVWR IO's RVWR
    kfcl instance recovery SMON
    c)Internal Structure of Controlfile
    ++++++++++++++++++++++++++++++++++++
    The contents of the current controlfile can be dumped in text form.
    Dump Level Dump Contains
    1 only the file header
    2 just the file header, the database info record, and checkpoint progress records
    3 all record types, but just the earliest and latest records for circular reuse record types
    4 as above, but includes the 4 most recent records for circular reuse record types
    5+ as above, but the number of circular reuse records included doubles with each level
    the session must be connected AS SYSDBA
    alter session set events 'immediate trace name controlf level 5';
    This dump show lots of intresting information.
    it also show rman recordes if we used this controlfile in rman backup.
    Thanks
    Kuljeet Pal Singh

    You can find each doc in html and pdf format on the Documentation Library<br>
    You can too download all the documentation in html format to have all on your own computer here (445.8MB)<br>
    <br>
    Nicolas.

  • Oracle 10g - Defining the column name in Non English

    Hi Experts,
    I have an exisitng application which is developed on Windows using ASP Technology and uses Oracle 10g 10.1.0.2.0.
    The application is supported with an instance of Data Base within which multiple tablespaces are created for different clients. The application is developed in such a way that some of the tables arecreated dynamically and the columns are named using the data entered through the UI.
    This application needs to be globalized now. The problem is, the column name entered through the UI can be in any language based on the client's settings and those values in turn will be used for naming the columns in the tables.
    1) Can I have the column names to be named using non english characters in Oracle 10g DB? If so,
    1.1) what should I do to configure the exisiting Oracle instance to support it?
    1.2) To what level is that configuration possible, is it per DB instance level (or) can it be done at Tablespace level. I would like to configure each tablespace to host tables with columns defined with different languages, say for example, tablespace 1 will have tables with Japaenese column names and tablespace 2 will have tables with German column names?
    2) What should I do to make my entire DB to support unicode data i.e., to accept any language strings. Currently all strings are declared as VarChar2, should I change all VarChar2 to NVarChar2 (or) is there a way to retain the VarChar2 as is and make some database wide setting?
    Please note that I do not have an option of retaining the column in English as per the Business Requirement.
    Envionment:
    OS - Windows 2003 32 bit
    Oracle 10g 10.1.0.2.0
    UI forms in ASP
    TIA,
    Prem

    1. Yes, you can.
    SQL> create table ÜÝÞ( ßàá number(10));
    Table created.
    SQL> insert into ÜÝÞ values (10);
    1 row created.1.1 and 1.2 and 2. You can choose UTF as your default character set. It allows the user of non-English characters in VARCHAR columns in your whole database. It is not per tablespace.
    SQL> create table ÜÝÞ( ßàá varchar2(100));
    Table created.
    SQL> insert into ÜÝÞ values ('âãäçìé');
    1 row created.

  • Oracle 10g - Date format in SELECT query for CFOUTPUT

    Hello, everyone.
    The project that I am working on in the dev environment is connected to an Oracle 11g database, but the production side is Oracle 10g.
    I have a page that is erroring in production (but not development) when it gets to a date that it needs to display.
    A co-worker mentioned that, in 10g, if a date/time is being SELECTed, you have to put it in to_char(), so I did that.
    But it's still erroring, and I'm not getting an error message, so I'm assuming that I have an incorrect format for the date in the SELECT.
    What is the proper format for SELECTing a date/time when using to_char()?  Right now, I have SELECT to_char(create_date,'MM-DD-YYYY HH:MI') FROM tableA .  Is this not correct for CF to output?
    Thank you,
    ^_^

    Please see my original post ("I have a page erroring in production (but not in development) when it gets to a date that it needs to display.")  Sorry if it came across as vague.  It made sense, to me, when I typed it.  But, then, I'm usually typing fast just to get the question out there, when I'm in a hurry.
    Haven't done a CFDUMP, yet, as every time I make a change in development that needs to be tested in production, I have to notify my supervisor that there are files that need to be copied into production, which can sometimes take a while, so I try to do troubleshooting on dev side - it's a pain in the you-know-what, but that's the kind of environment I'm working in.
    As it turns out, changing the format in the SELECT to_char() did the trick.  If anyone else has this issue with Oracle 10g, I'm now using SELECT to_char(create_date,'YYYY/MM/DD HH:MI') FROM tableA, and now the CFOUTPUT is processing the whole page.  I guess the MM-DD-YYYY threw CF into a tizzy, breaking the process?
    Anyhoo, it's working, now.  Thank you, Dan and Adam, for your thoughts on this.
    ^_^

  • Nested tables and multiset operators in Oracle 10g

    Consider the following scenario:
    We have two identical relations R and S defined as:
    CREATE TABLE R(
    a INTEGER,
    b table_type)
    NESTED TABLE b STORE as b_1;
    CREATE TABLE S(
    a INTEGER,
    b table_type)
    NESTED TABLE b STORE as b_2;
    where table_typ is defined as
    CREATE TYPE table_typ AS TABLE OF VARCHAR2(8);
    Suppose we have two instances of R and S, each having one tuple as follows: R(1,table_typ('a','b')) and S(1,table_typ('b','c')).
    I would like to "merge" these two simple instances (e.g., achieve the effect of a simple SELECT * FROM R UNION SELECT * FROM S query) and obtain the following resulting instance: Result(1,table_typ('a','b','c')).
    Would this be possible in Oracle 10g? A simple UNION does not work (I got a "inconsistent datatypes: expected - got SCOTT.TABLE_TYP" error). I also took a look at the MULTISET UNION operator over nested tables available in Oracle 10g, but it doesn't seem to get me anywhere. Any help on this would be greatly appreciated.
    Thank you,
    Laura

    Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    SQL> CREATE OR REPLACE TYPE table_type AS TABLE OF VARCHAR2 (8);
      2  /
    Type created.
    SQL> CREATE TABLE r(
      2    a INTEGER,
      3    b table_type)
      4    NESTED TABLE b STORE as b_1;
    Table created.
    SQL> CREATE TABLE s(
      2    a INTEGER,
      3    b table_type)
      4    NESTED TABLE b STORE as b_2;
    Table created.
    SQL> INSERT INTO r VALUES (1, table_type ('a', 'b'));
    1 row created.
    SQL> INSERT INTO s VALUES (1, table_type ('b', 'c'));
    1 row created.
    SQL> COLUMN c FORMAT A10;
    SQL> SELECT r.a, r.b MULTISET UNION DISTINCT s.b c
      2  FROM   r, s
      3  WHERE  r.a = s.a;
             A C
             1 TABLE_TYPE('a', 'b', 'c')
    SQL>

  • Error in Installing Oracle 10g Express Edition Universal on WIndows2003

    While Installing Oracle 10g XE Universal On WIndows 2003 Server Standard Edition(Which is a standalone Machine). I got an following Error:
    Error No: 0x80040707
    Error Description: DLL Function Call Crashed: GetHostnameDll.getHostname.
    Plz find some solution for the above problem.

    Hi
    Here's the resolution that can work for you:
    Disable the "Print Spooler" service before running the installer.
    1.Open Control Panel: Start --> Settings --> Control Panel
    2.Double-click "Services"
    3.On the list of NT Services, right-click "Print Spooler"
    4.Select "Stop"
    5.Select "Properties"
    6.Under Startup Type, select "manual" or "disabled"
    7.Reboot your NT Server
    8.After rebooting, verify that the Print Spooler is still "stopped".
    9.Delete Program Files\Common Files\Installshield\Engine folder
    10.Re-run the installer.
    11.After installation, re-set the Print Spooler service to Startup type "Automatic" and start the service.
    Also, have a look at the installshield page: http://consumer.installshield.com/kb.asp?id=Q108167
    -Priya

  • Error message when installing Oracle 10g on Windows XP Professional

    Hello,
    I need help installing oracle 10g database. When I attempt to run the installation from the setup.exe icon, I get a message that says
    "Error in writing to directory C:\Documents and Settings\Owner\Local Settings\Temp\OraInstall2007-04-29_01-19-29PM. Please ensure this directory is writable and has atleast 45Mb of disk space. Installation cannot continue."
    When I try to open the installation from the Autorun icon, it points to an innability to find setup.exe and when I go back to Setup.exe, it gives me the above error. Everytime I try to run the installation and it fails, the installation leaves a folder in my Temp folder with the above format. Any help would be appreciated. Thank you.

    I do have administrative privilege on my computer and I have plenty of space. I have 80gb of free space. What do I do to successfully install the software without incurring those messages I displayed in my first thread?

  • Oracle 10g on HP-UX, Terrible Poor Performance!!

    Hi All,
    I setup an Oracle 10g on HP-UX 11iv1. Server is a HP 9000, 4 CPUs (750
    MHZ). It is connected to Disk System 2405 (Virtual Array 7110). Fiber
    Channels are connected at 2 GB speed.
    I installed a cluster 10g database. First I installed CRS and after
    that I installed oracle database. ( I want to test clustered database
    with one instance)
    I installed every thing line by line as oracle document wrote.
    All the things, kernel parameters, patches, are like oracle wrote in
    its document.
    I installed Golden quality package June 2004.
    I increased shmmax to 2.3 G . My SGA is 1.7 G And change some other
    parameters as Sandy Gruver wrote in Best Practices for Oracle on HPUX.
    I used oracle new storage system called ASM for this case.
    When I put the system under the load, I was monitoring the system
    carefully.
    I started gmp. When we sent some quarries to database (It is not heavy
    load, I tested it with a Linux system on proliant ML570 without any
    problem), suddenly DISK section in gpm changed to red (critical ) I
    read the warning. It said "Disk bottleneck probability = 100%". I
    changed the output of disk report to "Report IO by Disk"
    "DISK%" was 100% and "RAW IO RT" was about 1000 for two disks ( This
    two disks dedicated for ASM). In this situation CPU idle time was 1% or
    2% for all the CPUs but load average was about 1. Performance is not
    acceptable at all ( In comparison with Oracle that installed on Linux).
    Glance reported Disk was in Critical situation.
    I think the problem is IO or something about Disks
    I used HP Disk System 2405. Fibber channels on both server side and
    Disk Array side are configured at 2 Gb and topologies are
    PTTOPT_FABRIC.
    Is it ok that RAW IO RT about 1000 for each LUN?
    Why Disk% in glance/report IO BY Disk/ was 100%?
    I found an error in STM logs about I/O.It said:
    Entry type: I/O error
    Product: Fiber Channel Interface
    Logger: td
    It logged this error about 12 times during the test.Any comment?
    Regards,
    Hasan

    Sorry, I have not a solution for your problem, but similar things happen on our installation on Solaris 5.8 with Oracle 10:
    I have a banking business solution from Windows/SQL Server 2000 to Sun Solaris/ORACLE 10g migrated. In the test environment everything was working fine. On the production system we have very poor DB performance. About 100 times slower than SQL Server 2000!
    Environment at Customer Server Side:
    Hardware: SUN Fire 4 CPU's, OS: Solaris 5.8, DB Oracle 8 and 10
    Data Storage: Em2
    DB access thru OCCI [Environment:OBJECT, Connection Pool, Create Connection]
    Depending from older applications it's necessary to run ORACLE 8 as well on the same Server. Since we have running the new solution, which is using ORACLE 10, the listener for ORACLE 8 is frequently gone (or by someone killed?). The performance of the whole ORACLE 10 Environment is very poor. As a result of my analyse I figured out that the process to create a connection to the connection pool takes up to 14 seconds. Now I am wondering if it a problem to run different ORACLE versions on the same Server? The Customer has installed/created the new ORACLE 10 DB with the same user account (oracle) as the older version. To run the new solution we have to change the ORACLE environment settings manually. All hints/suggestions to solve this problem are welcome. Thanks in advance.
    Anton

  • How to avoid of application running on Oracle 10g to be copied?

    I am a newbie to the security issues, so I need your help, please, where to start / what to read:
    I have an application running across many customers on Oracle 10g. I have faced lately that our users
    can use their daily backups to establish a totaly new database on a same / different server
    and point our application to use it as well.
    Is there any way to avoid it? F.e. I thought to use SELECT * FROM v$instance; to get the server instance details, and
    in result with some other function to obtain, let say, local server's (WIN2003) details,
    such as HD Serial Number, MAC number or so and then to check these values each time user runs the application.
    Is it the correct way? What are the basics here at all?
    Many thanks in advance to all!

    A lot of enterprises, however, actively avoid systems which are locked down to a particular server for very legitimate reasons. If my data center dies in the middle of the night, I sure don't want to have to call your mobile phone so that you can get to a computer, log in to the office network, and get me a new key so that I can finish my emergency failover. If I've got dozens of applications, I absolutely don't want to do that with dozens of different vendors.
    It sounds like your problem, though, isn't that users are installing your software on multiple computers it's that they are accessing functionality they haven't licensed. That is generally a much easier problem to solve and doesn't require you to lock anything down to a particular machine. You can create a table LICENSED_CONTENT, for example,
    CREATE TABLE licensed_content (
      client_id    NUMBER,
      content_type VARCHAR2(30),
      key          RAW(128)
    )In this case, KEY is, say, a hash (using the DBMS_CRYPTO or DBMS_OBFUSCATION_TOOLKIT packages if you'd like) of the client_id, content_type, and a bit of salt (i.e. a fixed string that only you know). When you sell a license to manage diamond content, you provide a script that inserts the appropriate row in the LICENSED_CONTENT table. When your application starts up, it reads the LICENSED_CONTENT table and verifies the hash before allowing users to access that type of content. This allows legitimate customers to move the software from one system to another but prevents them from accessing new functionality without a new license.
    Justin

  • Client unable to connect to Oracle 10g on linux

    I have installed Oracle 10g on an Intel box running RedHat AS 3.0. The database installation was succesful but I am unable to connect to it from the client on my laptop running Oracle 10g client and Winfdows XP Pro. The server ip is 192.168.1.10 and I can ping it from the client:
    C:\>ping attila.n3kje.net
    Pinging attila.n3kje.net [192.168.1.10] with 32 bytes of data:
    Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
    Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
    Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
    Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
    Ping statistics for 192.168.1.10:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    Here is some info about the 2 environments:
    [oracle@attila bin]$ uname -a
    Linux attila.n3kje.net 2.4.21-9.0.1.ELsmp #1 SMP Mon Feb 9 22:26:51 EST 2004 i686 i686 i386 GNU/Linux
    Server hosts file
    ======================================================
    # Do not remove the following line, or various programs
    # that require network functionality will fail.
    127.0.0.1 attila.n3kje.net attila localhost.localdomain localhost
    hostname output
    ======================================================
    [root@attila root]# hostname
    attila.n3kje.net
    ifconfig output
    =======================================================
    [root@attila root]# ifconfig
    eth0 Link encap:Ethernet HWaddr 00:C0:9F:1D:0C:C8
    inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:13772171 errors:0 dropped:0 overruns:0 frame:0
    TX packets:13748842 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:1269613311 (1210.7 Mb) TX bytes:4065314800 (3876.9 Mb)
    Interrupt:16 Base address:0xecc0 Memory:fe100000-fe120000
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:5513840 errors:0 dropped:0 overruns:0 frame:0
    TX packets:5513840 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:865454291 (825.3 Mb) TX bytes:865454291 (825.3 Mb)
    Client TNSNAMES.ORA
    ======================================================
    # tnsnames.ora Network Configuration File: C:\Oracle\product\10.1.0\Client_1\NETWORK\ADMIN\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORACLE10G =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = DEV10G)
    PRDSRR =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = dev10g)
    Client SQLNET.ORA
    ======================================================
    # sqlnet.ora Network Configuration File: C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
    # Generated by Oracle configuration tools.
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
    Server TNSNAMES.ORA
    ======================================================
    # tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
    etwork/admin/tnsnames.ora
    # Generated by Oracle configuration tools.
    DEV10G =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = attila.n3kje.net)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = DEV10G)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    Server LISTENER.ORA
    ======================================================
    # listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
    etwork/admin/listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = attila.n3kje.net)(PORT = 1521))
    Results from the TNSPING command issued at the client
    =================================================================
    C:\>tnsping prdsrr
    TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 02-APR-2
    004 09:26:11
    Copyright (c) 1997, 2003, Oracle. All rights reserved.
    Used parameter files:
    C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
    (HOST = 192.168.1.10)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = dev10g)))
    TNS-12541: TNS:no listener
    C:\>tnsping oracle10g
    TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 02-APR-2
    004 09:26:38
    Copyright (c) 1997, 2003, Oracle. All rights reserved.
    Used parameter files:
    C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
    (HOST = 192.168.1.10)(PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVI
    CE_NAME = DEV10G)))
    TNS-12541: TNS:no listener
    C:\>
    Trying to connect to the database from the server
    ==================================================
    [oracle@attila bin]$ echo $ORACLE_SID
    DEV10G
    [oracle@attila bin]$ ./sqlplus system
    SQL*Plus: Release 10.1.0.2.0 - Production on Fri Apr 2 12:22:29 2004
    Copyright (c) 1982, 2004, Oracle. All rights reserved.
    Enter password:
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL> exit
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Pr
    oduction
    With the Partitioning, OLAP and Data Mining options
    [oracle@attila bin]$ ./sqlplus system@dev10g
    SQL*Plus: Release 10.1.0.2.0 - Production on Fri Apr 2 12:23:09 2004
    Copyright (c) 1982, 2004, Oracle. All rights reserved.
    Enter password:
    ERROR:
    ORA-12154: TNS:could not resolve the connect identifier specified
    tnsping issued at the server
    ======================================================
    [oracle@attila bin]$ tnsping dev10g
    TNS Ping Utility for Linux: Version 10.1.0.2.0 - Production on 02-APR-2004 12:3
    :44
    Copyright (c) 1997, 2003, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/10.1.0/db_1/network/admin/sqlnet.ora
    TNS-03505: Failed to resolve name
    What am I doing wrong?
    Thanks
    Renato

    Ok, I was able to succesfully connect to the database from the client. I made the following changes to the sqlnet.ora, tnsnames and listener. Here are the changes I made:
    sqlnet.ora
    ==============================
    # SQLNET.ORA Network Configuration File: /u01/app/oracle/product/9.2.0.1.0/netwo
    rk/admin/sqlnet.ora
    # Generated by Oracle configuration tools.
    # NAMES.DIRECTORY_PATH= (EZCONNECT)
    NAMES.DIRECTORY_PATH= (EXCONNECT, TNSNAMES, ONAMES, HOSTNAME)
    listener.ora
    ==============================
    # listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
    etwork/admin/listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (GLOBAL_DBNAME = DEV10G)
    (ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
    (SID_NAME = DEV10G)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
    tnsnames.ora
    ===========================================
    # tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
    etwork/admin/tnsnames.ora
    # Generated by Oracle configuration tools.
    DEV10G =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = DEV10G)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    Here is the new problem!
    I start the dbconsole using the folowing command:
    [oracle@attila bin]$ ./emctl start dbconsole
    TZ set to US/Eastern
    Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
    Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
    http://attila.n3kje.net:5500/em/console/aboutApplication
    Starting Oracle Enterprise Manager 10g Database Control ........................
    ... started.
    Logs are generated in directory /u01/app/oracle/product/10.1.0/db_1/attila.n3kje
    .net_DEV10G/sysman/log
    When I try and access it from the client I get the following error message:
    "The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation."
    What am I doing wrong this time?
    Your help would be greatly appreciated
    Thanks
    Renato

Maybe you are looking for