SVT Post-processing
Hi
Not quite the correct place to post this but I thought that some of you might have some experience with this toolkit.
I'm streaming data to a binary file which I would then like to open for analysis on another machine. The data is being collected from a microphone. Now here is the problem. If I scale the data to dB before saving, and then open the file, the values come out correct. Similarly, if I save the values as pressure levels, these values are also correct when I open them. If I wire the pressure levels (having first built a waveform) into one of the sound and vibration toolkit, sound level VI's then I get results out with a massive zero offset (in the negative range) and the 'amplitude' of the level is incorrect - e.g. -50dB to -5dB when the input is 94dB.
Any ideas what I am doing wrong? Basically I want to save the values as pressures, and then during post processing, convert them to dB.
Cheers
Dave
Preston
Thanks for the reply. I have enclosed the two vi's below. If i replace the binary write vi with a waveform I get error 71. The system will be collecting data continually so file size is extremely important, hence the choice of binary files. Is it possible to recreate the correct format to allow the S&V dB scaling to work in the reading VI?
Cheers
Dave
Attachments:
Sound Levelfile.vi 116 KB
openbin.vi 46 KB
Similar Messages
-
Post Processing a bank line item - opening balance
Hi Experts,
I need some help with post processing of a bank statement item.
It is a greenfield implementation where no legacy transactional data or opening balances are migrated. Therefore I've posted a bank statement with incoming domestic bank transfer. This line item now requires post processing as it does not relate to any preceding transaction / document.
The journal entry looks like this...
161012 - AUD Bank No.1 Domestic bank transfers = Credit 5,000,000
161010 - AUD Bank Account No 1 = Debit 5,000,000
I guess "post processing" is required to clear the account 161012 and credit account 161010.
What is the best way to do that?
Thanks
PuruHi Puru,
Go to Liquidity Management > view bank statements > Filter with your new bank
You will observe that a bank statement with ID # 0 got created and the closing balance is same amount what you have migrated.
Now you select new bank statement the ID will be 1 and the last bank statement 0 closing balance will become the opening bank balance in bank statement # 1.
Migration of balances for bank accounts enables you to migrate the current balances of your bank accounts. During migration system automatically creates an offsetting entry so that the document balance results in zero ( this entry is only for migration posting only )
Your expectation of again posting manual journal is not incorrect and is not required here.
Your migration of bank opening balance amount is successful and you can use this bank account for your postings going forward.
Kindly mark this thread as answered if i answered your queries.
Thanks
Lokesh Sharma -
Unable to find an Output Post Processor service to post-process request
Hi experts,
Users complaining that they could not able to generate the PDF.
User Complaint:
The program does not generate the PDF. The program just generates the XML output. The logfile shows that “Unable to find an Output Post Processor service to post-process request 25852905.”
EBS: 12.1.2
OS: RHEL 5.5
DB: 11.1.0.7.0
Steps that we tried:
1. Increased the OPP process to 16
2. Increased Concurrent:OPP Response Timeout to 750
3. There is no issue in manager log file.
4. Concurrent Requests Fail Due to Output Post Processing (OPP) Timeout (Doc ID 352518.1)
5. Restarted CM. Ran CMclean.
6. Re: Output Post Processor
7.Unable to View pdf Output File Created by XML Publisher
But we dont find any solutions over the above.
Log:
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='8414037'
p_trx_number_high='8414037'
p_open_invoice='N'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='Y'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: Running in debug mode
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00500: DEBUG: About to build WHERE clause.
MSG-00500: DEBUG: WHERE clause built.
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00500: DEBUG: Table 1: AR_ADJUSTMENTS COM_ADJ,
AR_PAYMENT_SCHEDULES P,
RA_CUST_TRX_LINE_GL_DIST REC,
RA_CUSTOMER_TRX A,
HZ_CUST_ACCOUNTS B,
RA_TERMS T,
RA_TERMS_LINES TL,
RA_CUST_TRX_TYPES TYPES,
AR_LOOKUPS L_TYPES,
HZ_PARTIES PARTY,
HZ_CUST_ACCT_SITES A_BILL,
HZ_PARTY_SITES PARTY_SITE,
HZ_LOCATIONS LOC,
HZ_CUST_SITE_USES U_BILL
MSG-00500: DEBUG: Table 2: RA_TERMS_LINES TL,
RA_CUST_TRX_TYPES TYPES,
AR_LOOKUPS L_TYPES,
HZ_CUST_ACCOUNTS B,
HZ_PARTIES PARTY,
HZ_CUST_SITE_USES U_BILL,
HZ_CUST_ACCT_SITES A_BILL,
HZ_PARTY_SITES PARTY_SITE,
HZ_LOCATIONS LOC,
AR_ADJUSTMENTS COM_ADJ,
RA_CUSTOMER_TRX A,
AR_PAYMENT_SCHEDULES P,
RA_TERMS T
MSG-00500: DEBUG: Where 1: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND REC.CUSTOMER_TRX_ID = A.CUSTOMER_TRX_ID
AND REC.LATEST_REC_FLAG = 'Y'
AND REC.ACCOUNT_CLASS = 'REC'
AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
'INV', 0,
= COM_ADJ.PAYMENT_SCHEDULE_ID(+)
AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
AND 'C' = COM_ADJ.ADJUSTMENT_TYPE(+)
AND A.COMPLETE_FLAG = 'Y'
AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
AND A.PRINTING_OPTION IN ('PRI', 'REP')
AND L_TYPES.LOOKUP_CODE =
DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
AND NVL(P.TERMS_SEQUENCE_NUMBER,nvl(TL.SEQUENCE_NUM,0))=nvl(TL.SEQUENCE_NUM,nvl(p.terms_sequence_number,0))
AND DECODE(P.PAYMENT_SCHEDULE_ID,'',0, NVL(T.PRINTING_LEAD_DAYS,0))=0
AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
AND A_BILL.party_site_id = party_site.party_site_id
AND B.PARTY_ID = PARTY.PARTY_ID
AND loc.location_id = party_site.location_id
AND NVL(LOC.LANGUAGE,'US') = 'US'
AND A.TERM_ID = TL.TERM_ID(+)
AND A.TERM_ID = T.TERM_ID(+)
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID(+)
MSG-00500: DEBUG: Where 2: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
'INV', 0,
= COM_ADJ.PAYMENT_SCHEDULE_ID(+)
AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
AND 'C' = COM_ADJ.ADJUSTMENT_TYPE(+)
AND A.COMPLETE_FLAG = 'Y'
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID
AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
AND A.PRINTING_OPTION IN ('PRI', 'REP')
AND L_TYPES.LOOKUP_CODE =
DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
AND NVL(T.PRINTING_LEAD_DAYS,0) > 0
AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
AND A_BILL.PARTY_SITE_ID = PARTY_SITE.PARTY_SITE_ID
AND B.PARTY_ID = PARTY.PARTY_ID
AND LOC.LOCATION_ID = PARTY_SITE.LOCATION_ID
AND NVL(LOC.LANGUAGE,'US') = 'US'
AND NVL(P.TERMS_SEQUENCE_NUMBER,TL.SEQUENCE_NUM)=TL.SEQUENCE_NUM
AND T.TERM_ID = P.TERM_ID
AND TL.TERM_ID(+) = T.TERM_ID
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 26
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00010: 12:03 1 Transaction: 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: Get_Country_Description.
MSG-05000: DEBUG: Remit To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1: 11000 IH-35 NORTH
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City: AUSTIN
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State: TX
MSG-05000: DEBUG: Province:
MSG-05000: DEBUG: Postal Code: 78753
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code: US
MSG-05000: DEBUG: Customer Name:
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:
MSG-05000: DEBUG: Last Name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code: US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width: 40
MSG-05000: DEBUG: Height Min: 6
MSG-05000: DEBUG: Height Max: 6
MSG-05000: DEBUG: Remit To Formatted... 11000 IH-35 NORTH
AUSTIN TX 78753
MSG-05000: DEBUG: Bill To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1: 2481 ROSS CRES
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City: NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province: SASKATCHEWAN
MSG-05000: DEBUG: Postal Code: S9A3R3
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code: CA
MSG-05000: DEBUG: Customer Name: VAUGHN FAUTH
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name: VAUGHN
MSG-05000: DEBUG: Last Name: FAUTH
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code: US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width: 40
MSG-05000: DEBUG: Height Min: 8
MSG-05000: DEBUG: Height Max: 8
MSG-05000: DEBUG: Bill To Formatted... VAUGHN FAUTH
VAUGHN FAUTH
2481 ROSS CRES
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
MSG-05000: DEBUG: Ship To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1: 2481 ROSS CRES
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City: NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province: SASKATCHEWAN
MSG-05000: DEBUG: Postal Code: S9A3R3
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code: CA
MSG-05000: DEBUG: Customer Name: VAUGHN FAUTH
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:
MSG-05000: DEBUG: Last Name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code: US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width: 40
MSG-05000: DEBUG: Height Min: 8
MSG-05000: DEBUG: Height Max: 8
MSG-05000: DEBUG: Ship To Formatted... VAUGHN FAUTH
2481 ROSS CRES
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
Report Builder: Release 10.1.2.3.0 - Production on Wed Sep 25 12:03:07 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Unable to find an Output Post Processor service to post-process request 25854362.
Check that the Output Post Processor service is running.
+--------------------------------------+
+------------- 2) PRINT -------------+
Not printing the output of this request because post-processing failed.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Can any one please guide me for this issue.?.
Thanks,
VasanthHussein,
FNDOPP log file
9/25/13 10:47:48 AM] [Thread-31] Service thread starting up.
[9/25/13 10:47:48 AM] [EXCEPTION] [OPPServiceThread0] java.sql.SQLException: ORA-24067: exceeded maximum number of subscrib
ers for queue APPLSYS.FND_CP_GSM_OPP_AQ
ORA-06512: at "APPS.FND_CP_OPP_IPC", line 85
ORA-06512: at line 1
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:950)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1225)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3387)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3488)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3857)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.initAQ(OPPAQMonitor.java:558)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.init(OPPAQMonitor.java:534)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.initialize(OPPAQMonitor.java:89)
at oracle.apps.fnd.cp.opp.OPPServiceThread.init(OPPServiceThread.java:94)
at oracle.apps.fnd.cp.gsf.BaseServiceThread.run(BaseServiceThread.java:135)
[9/25/13 11:04:11 AM] [EXCEPTION] [OPPAQMON:876235] ORA-04021: timeout occurred while waiting to lock object
[GC 20321K->4065K(63360K), 0.0137050 secs]
Thanks,
Vasanth -
One or more post-processing actions failed. Consult the OPP service log for details.
hi expert plz help me i can't understand here what can i do to resove this error.
here is the logfile details of output post processor
ebs- 11i (11.5.10.2)
os - rhel 4
[9/2/13 4:54:48 PM] [main] Starting GSF service with concurrent process id = 2984174.
[9/2/13 4:54:48 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[9/2/13 4:54:48 PM] [Thread-14] Service thread starting up.
[9/2/13 4:54:48 PM] [Thread-15] Service thread starting up.
[9/2/13 4:59:34 PM] [OPPServiceThread0] Post-processing request 21672063.
[9/2/13 4:59:35 PM] [2984174:RT21672063] Executing post-processing actions for request 21672063.
[9/2/13 4:59:35 PM] [2984174:RT21672063] Starting XML Publisher post-processing action.
[9/2/13 4:59:35 PM] [2984174:RT21672063]
Template code: PURCHASE_REGISTER_ITEMWISE
Template app: CONA
Language: en
Territory: 00
Output type: PDF
[090213_045936406][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[090213_045936407][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[090213_045936408][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[090213_045936408][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[090213_045936408][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[090213_045936408][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[090213_045936409][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[090213_045936409][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[090213_045936409][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=demo.oriplast.com)(PORT=1526)))(CONNECT_DATA=(SID=ORIDEMO)))]
[090213_045936409][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[090213_045936409][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[090213_045936410][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[090213_045936410][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[090213_045936419][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[090213_045936419][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[090213_045936419][][EXCEPTION] [DEBUG] [APPLTMP]:[/u03/ORIDEMO/LIVE_APPL/livecomn/temp]
[090213_045936419][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[090213_045936419][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386]
[090213_045936419][][EXCEPTION] [DEBUG] [java.vm.version]:[1.4.2_04-b05]
[090213_045936419][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[090213_045936419][][EXCEPTION] [DEBUG] [dbcfile]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936419][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[090213_045936420][][EXCEPTION] [DEBUG] [path.separator]:[:]
[090213_045936420][][EXCEPTION] [DEBUG] [APPLCSF]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Client VM]
[090213_045936420][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[090213_045936420][][EXCEPTION] [DEBUG] [user.country]:[US]
[090213_045936420][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[090213_045936421][][EXCEPTION] [DEBUG] [user.dir]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo]
[090213_045936421][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.4.2_04-b05]
[090213_045936421][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[090213_045936421][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/endorsed]
[090213_045936421][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[090213_045936421][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936421][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[090213_045936422][][EXCEPTION] [DEBUG] [line.separator]:[
[090213_045936422][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[090213_045936422][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[090213_045936422][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[090213_045936422][][EXCEPTION] [DEBUG] [cpid]:[2984174]
[090213_045936422][][EXCEPTION] [DEBUG] [sun.java2d.fontpath]:[]
[090213_045936423][][EXCEPTION] [DEBUG] [java.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386/client:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/../lib/i386:/u03/ORIDEMO/LIVE_APPL/liveora/iAS/lib:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/i686/native_threads:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/linux/native_threads:/u03/ORIDEMO/LIVE_APPL/liveappl/cz/11.5.0/bin:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib]
[090213_045936423][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[090213_045936423][][EXCEPTION] [DEBUG] [java.class.version]:[48.0]
[090213_045936423][][EXCEPTION] [DEBUG] [java.util.prefs.PreferencesFactory]:[java.util.prefs.FileSystemPreferencesFactory]
[090213_045936423][][EXCEPTION] [DEBUG] [os.version]:[2.6.9-82.ELsmp]
[090213_045936424][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[090213_045936424][][EXCEPTION] [DEBUG] [user.home]:[/home/appdemo]
[090213_045936424][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[090213_045936424][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
[090213_045936424][][EXCEPTION] [DEBUG] [file.encoding]:[ANSI_X3.4-1968]
[090213_045936424][][EXCEPTION] [DEBUG] [java.specification.version]:[1.4]
[090213_045936424][][EXCEPTION] [DEBUG] [CACHEMODE]:[DISTRIBUTED]
[090213_045936424][][EXCEPTION] [DEBUG] [java.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/java/appsborg2.zip:/u03/ORIDEMO/LIVE_APPL/livecomn/java/apps.zip:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/forms60/java:/u03/ORIDEMO/LIVE_APPL/livecomn/java]
[090213_045936424][][EXCEPTION] [DEBUG] [user.name]:[appdemo]
[090213_045936424][][EXCEPTION] [DEBUG] [DBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936425][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
[090213_045936425][][EXCEPTION] [DEBUG] [java.home]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre]
[090213_045936425][][EXCEPTION] [DEBUG] [sun.arch.data.model]:[32]
[090213_045936425][][EXCEPTION] [DEBUG] [user.language]:[en]
[090213_045936425][][EXCEPTION] [DEBUG] [java.specification.vendor]:[Sun Microsystems Inc.]
[090213_045936425][][EXCEPTION] [DEBUG] [java.vm.info]:[mixed mode]
[090213_045936425][][EXCEPTION] [DEBUG] [logfile]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo/FNDOPP2984174.txt]
[090213_045936425][][EXCEPTION] [DEBUG] [java.version]:[1.4.2_04]
[090213_045936425][][EXCEPTION] [DEBUG] [java.ext.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/ext]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i18n.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/sunrsasign.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jsse.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jce.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/classes]
[090213_045936426][][EXCEPTION] [DEBUG] [java.vendor]:[Sun Microsystems Inc.]
[090213_045936426][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[090213_045936426][][EXCEPTION] [DEBUG] [file.separator]:[/]
[090213_045936426][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.cpu.endian]:[little]
[090213_045936426][][EXCEPTION] [DEBUG] [APPLOUT]:[out/ORIDEMO_demo]
[090213_045936427][][EXCEPTION] [DEBUG] [sun.cpu.isalist]:[]
[9/2/13 4:59:40 PM] [UNEXPECTED] [2984174:RT21672063] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
at sun.io.Converters.getConverterClass(Converters.java:215)
at sun.io.Converters.newConverter(Converters.java:248)
at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
... 17 more
[9/2/13 4:59:40 PM] [2984174:RT21672063] Completed post-processing actions for request 21672063.
[9/2/13 5:10:51 PM] [OPPServiceThread1] Post-processing request 21672114.
[9/2/13 5:10:51 PM] [2984174:RT21672114] Executing post-processing actions for request 21672114.
[9/2/13 5:10:51 PM] [2984174:RT21672114] Starting XML Publisher post-processing action.
[9/2/13 5:10:51 PM] [2984174:RT21672114]
Template code: PURCHASE_REGISTER_ITEMWISE
Template app: CONA
Language: en
Territory: 00
Output type: PDF
[9/2/13 5:10:51 PM] [UNEXPECTED] [2984174:RT21672114] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
at sun.io.Converters.getConverterClass(Converters.java:215)
at sun.io.Converters.newConverter(Converters.java:248)
at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
... 17 more
[9/2/13 5:10:51 PM] [2984174:RT21672114] Completed post-processing actions for request 21672114.
thaks
priteshhi experts
thanks for ur replay,
this issue is occured with only the particular request and this is custom report. i try some step
down the manager run the cmclean.sql, increease the processes of output postprocessor but not get the any type of effect on issue...
and also follow the step that describe in the below doc:
Output Post Processor (OPP) Log Contains Error "oracle.xdo.parser.v2.XMLParseException: Unexpected EOF" (Doc ID 1273272.1)
To Bottom
request log file details below:
+---------------------------------------------------------------------------+
CONA Custom: Version : UNKNOWN - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
PURCHASE_REGISTER_ITEMWISE module: Ori - Purchase Register - Item wise (15x12)
+---------------------------------------------------------------------------+
Current system time is 02-SEP-2013 17:10:29
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_SEGM='02'
P_CHART_OF_ACCOUNTS_ID='50268'
p_from_date='2012/04/01 00:00:00'
p_to_date='2012/04/05 00:00:00'
P_YES_NO='No'
XML_REPORTS_XENVIRONMENT is :
/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
_AMERICA.UTF8
Report Builder: Release 6.0.8.25.0 - Production on Mon Sep 2 17:10:29 2013
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 21672114 on node DEMO at 02-SEP-2013 17:10:51.
Post-processing of request 21672114 failed at 02-SEP-2013 17:10:51 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
+------------- 2) PRINT -------------+
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 02-SEP-2013 17:10:52
+---------------------------------------------------------------------------+
i check the document that u all suggest above after that i update u as soon as possible..
thanks & regards
pritesh ranjan -
One or more post-processing actions failed - XML Publisher report
Hi all, I'm working with the following envinronment:
Unix platform: HP-UX rp1 B.11.11 U 9000/800
DB: Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
eBS: EBS 11.5.9
More in detail I have a problem when I run a request to see an XML Publisher Report. The request's status at the end is WARNING.....
When I click on "View Output" I don't see nothing and inside the "View Log" I have this error:
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1897375 on node RP1DEV at 10-SEP-2008 14:13:36.
Post-processing of request 1897375 failed at 10-SEP-2008 14:13:37 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Following the Metalink Note 364547.1 I opened the OPP service log and this is the content:
[9/10/08 2:51:09 PM] [OPPServiceThread0] Post-processing request 1897433.
[9/10/08 2:51:09 PM] [72379:RT1897433] Executing post-processing actions for request 1897433.
[9/10/08 2:51:09 PM] [72379:RT1897433] Starting XML Publisher post-processing action.
[9/10/08 2:51:09 PM] [72379:RT1897433]
Template code: XX_MANAGERS
Template app: AR
Language: en
Territory: GR
Output type: PDF
[9/10/08 2:51:09 PM] [UNEXPECTED] [72379:RT1897433] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:187)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
at sun.io.Converters.getConverterClass(Converters.java:223)
at sun.io.Converters.newConverter(Converters.java:263)
at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
... 17 more
[9/10/08 2:51:09 PM] [72379:RT1897433] Completed post-processing actions for request 1897433.
Anybody have any idea where the error is ?
Any help will be appreciated
AlexYou are right !!
The problem is inside the report generated by Oracle Reports
The XML code, which I retrieve running the report request is the following:
<?xml version="1.0" encoding="&Encoding"?>
- <!-- Generated by Oracle Reports version 6.0.8.20.2
-->
- <MODULE1>
- <LIST_G_MANAGER_NO>
- <G_MANAGER_NO>
<MANAGER_NO>1000</MANAGER_NO>
<MANAGER_NAME>Anil Passi</MANAGER_NAME>
</G_MANAGER_NO>
- <G_MANAGER_NO>
<MANAGER_NO>1001</MANAGER_NO>
<MANAGER_NAME>Martin</MANAGER_NAME>
</G_MANAGER_NO>
</LIST_G_MANAGER_NO>
</MODULE1>
and the problem is the "&" !!!
So, inside Oracle Reports, when I try to generate the XML code from a preexisting report, the encoding variable is not set.
Now, I'm trying to understand how to set it, but I didn't find nothing....
Somebody knows where can I find a Report's configuration file in order to set this "encoding" ?
Thanks
Alex -
Post-processing of request failed
Hi
Getting following error when I submit XML Publisher PDF report.
------------- 1) PUBLISH -------------
Beginning post-processing of request 265191 on node EORAAPD10 at 14-APR-2006 20:51:43.
Post-processing of request 265191 failed at 14-APR-2006 20:51:45 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Post Processor Log file:
Log file has the following error
[UNEXPECTED] [50985:RT79177] java.sql.SQLException: Non
supported SQL92 token at position: 1:
We are on XML Publisher 5.5 and EBS 11.5.10 CU2.
Any help will be greatly appreciated.
ThanksSuddenly I am getting this warning for a XML Publisher based Report.
Concurrent program Log
------------- 1) PUBLISH -------------
Beginning post-processing of request 610188 on node GCDSINGGN7HRO01 at 07-SEP-2010 10:39:47.
Post-processing of request 610188 failed at 07-SEP-2010 10:39:48 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Concurrent Manager Log (OutProcessor Log)
[9/6/10 6:29:36 PM] [OPPServiceThread1] Post-processing request 610188 .
[9/6/10 6:29:36 PM] [32829:RT610012] Executing post-processing actions for request 610188 .
[9/6/10 6:29:36 PM] [32829:RT610012] Starting XML Publisher post-processing action.
[9/6/10 6:29:36 PM] [32829:RT610012]
Template code: XXPLG_PMS_APPRAISAL_RATING_MGR_TEMP
Template app: XXPLG
Language: en
Territory: US
Output type: EXCEL
[9/6/10 6:29:37 PM] [32829:RT610012] Output file was found but is zero sized - Deleted
[9/6/10 6:29:37 PM] [UNEXPECTED] [32829:RT610012] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
Others this type of report are working fine. Kindly helo on this -
XML Publisher post-processing error 'java.io.FileNotFoundException'
Hi,
We are getting following XML Publisher post-processing error while running XML Publisher report.
It was working earlier but suddenly its erroring out.
[9/07/10 9:00:17 PM] [OPPServiceThread1] Post-processing request 559655.
[9/07/10 9:00:18 PM] [39177:RT559655] Executing post-processing actions for request 559655.
[9/07/10 9:00:18 PM] [39177:RT559655] Starting XML Publisher post-processing action.
[9/07/10 9:00:18 PM] [39177:RT559655]
Template code: XXHPOXPRRFLR
Template app: XXH
Language: en
Territory: 00
Output type: PDF
[9/07/10 9:00:18 PM] [UNEXPECTED] [39177:RT559655] java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:274)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
[9/07/10 9:00:18 PM] [39177:RT559655] Completed post-processing actions for request 559655.
Please help me out to resolve this issue.
Thanks & Regards,
SagarikaHi,
java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)Most probably this file is not created (since no changes have been done recently, so definitely it is not a permission issue), and if there are any log files generate at the client side it should help in investigating the issue.
Thanks,
Hussein -
How can I view my 6D raw files before I open them in post processing?
How can I view my 6D raw files after I load them on my computer & before I open them on a post processing Program?
I have no problem doing that with my 1DX,1DIV or 5Dmk III. This problem exist with any sdhc card I use on the 6D, but not on any other camera with the same cards.
Solved!
Go to Solution.Your computer doesn't have camera RAW support installed for a 6D. RAW isn't really a standard-format... it's more of a concept. Every individual camera has it's own unique RAW format (even though they all have the same .CR2 extension).
Each time a new camera comes out, companies that make RAW processing software will make an update available that adds that camera. You'll need to get that update and install it.
Tim Campbell
5D II, 5D III, 60Da -
OIM 11.1.1.5: Post Process Event Handler, change password notification
Hi,
Products
OIM 11.1.1.5 BP02
OAM 11.1.1.5
OID 11.1.1.5
Problem
I have written a post-process event handler which fires when a role is assigned to a user. The event handler calls a plugin which uses the UserManager API to generate and change the user's password.
I've tested this by assigning a role to the user via the OIM web console. I can see my log messages indicating that the event handler has fired and that the password has been changed.
However, I expected that when UserManager.changePassword completed, a notification email would then be sent to the user informing them of the new password, but no notification email has been sent.
The email notifications have been set up correctly, because I have changed the same user's password via the OIM web console and successfully received a Reset Password email.
So, my questions are:
1) Am I right in thinking that when you call UserManager.changePassword(), an out-of-the-box ResetPassword email notification should be sent to the user?
2) Has anyone got this working in 11.1.1.5?
Some more detailed info
In my plugin class I'm calling the following from both execute methods (EventResult and BulkEventResult):
char newpasswd[] = new RandomPasswordGeneratorImpl().generatePassword(user);
getUserManager().changePassword(userKey, newpasswd, false, null, true);
logger.info(("Successfully changed password"));
plugin.xml
<oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<plugins pluginpoint="oracle.iam.platform.kernel.spi.EventHandler">
<plugin
pluginclass="oracle.iam.PostInsertPlugin"
version="1.0"
name="PostInsertPlugin">
</plugin>
</plugins>
</oimplugins>
$OIM_HOME/server/bin/weblogic.properties
wls_servername = oim_server1
app = OIMMetadata
metadata_from_loc=/home/oracle/eventhandlers
metadata_file=/metadata/roleuser/custom/EventHandlers.xml
/home/oracle/eventhandlers/import/metadata/roleuser/custom/EventHandlers.xml
<?xml version='1.0' encoding='utf-8'?>
<eventhandlers
xmlns="http://www.oracle.com/schema/oim/platform/kernel"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.oracle.com/schema/oim/platform/kernel orchestration-handlers.xsd">
<action-handler
class="oracle.iam.PostInsertPlugin"
entity-type="RoleUser"
operation="CREATE"
name="PostInsertPlugin"
stage="postprocess"
order="1002"
sync="TRUE"/>
</eventhandlers>
There are no errors in the OIM out and diagnostic logs apart from the following which occur at OIM startup:
[2013-01-07T16:29:23.425+00:00] [oim_server1] [ERROR] [IAM-0080075] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 2e903d7ef060ab65:66b2de91:13c15d6d9ce:-8000-0000000000000002,0] [APP: oim#11.1.1.3.0] XML schema validation failed for XML /metadata/iam-features-OIMMigration/EventHandlers.xml and it will not be loaded by kernel.
[2013-01-07T16:29:24.267+00:00] [oim_server1] [ERROR] [IAM-0080075] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 2e903d7ef060ab65:66b2de91:13c15d6d9ce:-8000-0000000000000002,0] [APP: oim#11.1.1.3.0] XML schema validation failed for XML /metadata/iam-features-callbacks/event_configuration/EventHandlers.xml and it will not be loaded by kernel.
Thanks
dty
Edited by: oim_user on Jan 7, 2013 5:37 PMNo notification will be sent if you changepassword using the method from usermanager api.
You have to trigger the resetpassword event manullay in your code.
Here is a sample code to create an event for reset password. Once you create event, invoke it from notification service - notify method.
NotificationEvent event = new NotificationEvent();
String[] receiverUserIds= {userLogin};
event.setUserIds(receiverUserIds);
event.setTemplateName("ResetPasswordNotification");
event.setSender(null);
HashMap<String, Object> resolvedData = new HashMap<String, Object>();
resolvedData.put("userLoginId", userLogin);
event.setParams(resolvedData); -
Video post processing/quality control no longer works in flash player
I use to watch videos via http://www.channel5.com and was able to use the post processing features in the AMD driver to improve the picture quality.
Now, it no longer works. Is this because hardware acceleration isn't working?
For a while I was able to use it in Internet Explorer, Sometimes in Firefox but never in Chrome. Now even with internet explorer it doesn't seem to work correctly.
I am using the latest flash versions for all platforms and the latest browser and driver version from AMD too.
Has Adobe changed something with the latest version of flash which cause a problem with the AMD Driver? Why is there no longer a Hardware Acceleration check-box in Internet Explorer?
I am using Windows 8.1 and I have the setting in the AMD CCC "apply current vdieo quality settings to internet video" checked. I have made sure in Firefox and Chrome hardware acceleration is enabled both in flash player settings and in the browser settings.
Thanks for any pointers you can give.It may be for you, but it isn't for me in Internet Explorer, by comparison though, there is the box available in Chrome and Firefox...although in Chrome it doesn't do anything.
I did some more testing; With Internet Explorer hardware acceleration seems to be dependant on the website you watch.
For example, using IE to visit http://www.dailymotion.com the post processing options work fine, but when on http://www.channel5.com they do not. Is there any reason why this is?
As for other browsers, it seems hardware acceleration just isn't working at all since post processing never works on chrome.
On Firefox it seems to behave the same way as IE, e.g it works on some sites but not others.
I thought I may be able to get around this by disabling the pepper flash player in chrome, but it doesn't seem to make any difference, either its still using the built-in one or it still doesn't work at all with hardware acceleration.
Either way none of these achieve what I was able too before, get hardware acceleration working with http://www.channel5.com . -
Post Processing records in BAPI_PRODORDCONF_CREATE_TT
Hi All,
I am using BAPI_PRODORDCONF_CREATE_TT for Production Confirmation with Auto Goods receipt(GR) Feature.
But, in case any error in goods movement occurs system creates a post processing record( Visible in transaction COGI).
We don't want entires in COGI.In case, any error occurs system should terminate the session. The same control is maintain in SPRO. But, BAPI overrules that.
Kindly let me know which settings to be used in BAPI, to avoid COGI.
In Post Wrong entries field of BAPI , I have used ' " ( Blank) value.
Please suggest.Hi Stuti,
What I suggest you is to use 2 BAPI's instead of 1.
First use BAPI_GOODSMVT_CREATE to carry out goods movements.
If this BAPI is successful then only execute the BAPI you are using only to carrying out the confirmations
This is the best way to control your confirmation for failed goods movements.
Regards,
Yogesh -
Sql upgrade 2000 to 2005 post processing error
Dear People,
I have successfully upgraded sql from 2000 to 2005 and im doing the post processing steps for upgrade using the sql tool and im getting error at the step " creare sap stored procedure" .im pasting the error messages below.
<b>dev_w0</b>
RROR: schema user dcb has administrator fixed server role (user_name() is 'dbo').
C This is not allowed. Please check the Server Roles of user dcb.
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
sapinst_dev.log<b></b>
ERROR 2007-12-04 10:54:48.62 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step ExeProcs with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssProcs|ind|ind|ind|ind|4|0|ExeProcs was executed with status ERROR .
ERROR 2007-12-04 10:54:48.62
lib=iamodmssql module=CIaNtMssDmo
MDB-05053 Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]SELECT permission denied on object 'MSSSOURCE', database 'DCB', schema 'dcb'.
<p> SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.</p>
regards
rajhi siddesh,
i also get the following errors in sql,this could be the main reason
1.Msg 15157, Level 16, State 1, Line 1
Setuser failed because of one of the following reasons: the database principal 'dcb' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
Msg 229, Level 14, State 5, Procedure sap_droproc, Line 56
SELECT permission denied on object 'sysobjects', database 'mssqlsystemresource', schema 'sys'.
Msg 229, Level 14, State 5, Procedure sap_droproc, Line 60
SELECT permission denied on object 'sysobjects', database 'mssqlsystemresource', schema 'sys'.
Msg 208, Level 16, State 0, Procedure sap_droproc, Line 65
Invalid object name '#allnames
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DCB
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, ASCII, optimized
pid 3236
Wed Dec 05 12:07:00 2007
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3236) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Dec 05 12:07:04 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >voyager_DCB_00 <
DpShMCreate: sizeof(wp_adm) 11808 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05CB0040, size: 4232896)
DpShMCreate: allocated sys_adm at 05CB0040
DpShMCreate: allocated wp_adm at 05CB1B30
DpShMCreate: allocated tm_adm_list at 05CB4950
DpShMCreate: allocated tm_adm at 05CB4980
DpShMCreate: allocated wp_ca_adm at 06024C10
DpShMCreate: allocated appc_ca_adm at 06029260
DpShMCreate: allocated comm_adm at 0602A9D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 060AB880
DpShMCreate: allocated gw_adm at 060AB8C0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 060AB8F0
DpShMCreate: allocated wall_adm at 060AB8F8
Wed Dec 05 12:07:05 2007
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( voyager) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >voyager_DCB_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Wed Dec 05 12:07:45 2007
ERROR => W0 (pid 2840) died [dpxxdisp.c 14441]
ERROR => W1 (pid 2844) died [dpxxdisp.c 14441]
ERROR => W2 (pid 1904) died [dpxxdisp.c 14441]
ERROR => W3 (pid 3308) died [dpxxdisp.c 14441]
ERROR => W4 (pid 4056) died [dpxxdisp.c 14441]
ERROR => W5 (pid 4088) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1244) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2888) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2932) died [dpxxdisp.c 14441]
ERROR => W9 (pid 2892) died [dpxxdisp.c 14441]
ERROR => W10 (pid 3116) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2096) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 2480) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:07:55 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Dec 05 12:07:55 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2840 Ended no 1 0 0
1 DIA 2844 Ended no 1 0 0
2 DIA 1904 Ended no 1 0 0
3 DIA 3308 Ended no 1 0 0
4 DIA 4056 Ended no 1 0 0
5 DIA 4088 Ended no 1 0 0
6 UPD 1244 Ended no 1 0 0
7 ENQ 2888 Ended no 1 0 0
8 BTC 2932 Ended no 1 0 0
9 BTC 2892 Ended no 1 0 0
10 BTC 3116 Ended no 1 0 0
11 SPO 2096 Ended no 1 0 0
12 UP2 2480 Ended no 1 0 0
Dispatcher Queue Statistics Wed Dec 05 12:07:55 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Wed Dec 05 12:07:55 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Dec 05 12:07:55 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:00 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >voyager_DCB_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1680) (SOFT_KILL)
Stop icman
killing process (2612) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1680 HANDLE:1608)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1680 HANDLE:1608)
wait for end of icman
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2612 HANDLE:1612)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Dec 05 12:08:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2612 HANDLE:1612)
DpStartStopMsg: send stop message (myname is >voyager_DCB_00 <)
NiIMyHostName: hostname = 'voyager'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Dec 05 12:08:13 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12099]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1548 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1548 (pos=2)
SiSelNRemove: removed sock 1548
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1548
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3236) [dpxxdisp.c 10371]
Good Bye ..... -
SAPINST failed step "Install Oracle Database (post processing)"
i will install ep6.0 with oracle database 9.2.0.4 on sun solaris.
the SAPINST failed at the step "Install Oracle Database (post processing) with follow error.
the oui - installer (runinstaller) finished sucessfully.
ERROR 2004-08-31 16:05:17
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failedORA-01101: database being created currently mounted by some other instance
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning optionJServer Release 9.2.0.4.0 - Production. SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
no user is logged on the Database. Database is not running (is shutdowned and unmounted). No Oracle process is running.
pleas help.
thanks
armin hadersbeckHi Armin,
We're going to install EP 6 stack3 with Oracle 9.2.0.4 and Solaris 9. We have exactly the same error as you during sapinst.
How do you solved that ?
Thanks a lot for your help,
Regards from Mexico,
Diego -
Error in Start SAP system (Post Processing)
Hi.,
I got an error during IDES installation in the step "Start SAP system (Post Processing)".
The details of START.LOG is as follows
running sapstart.exe GML 00 xyz -wait
Start service SAP_00 on machine
OpenSCManager of
failed. Error#: 6
CreateNamedPipe for
\pipe\SAP_00 Failed, Extended Error #123
Start service SAP_00 on machine
OpenSCManager of
failed. Error#: 6
Start (StartSAPService) failed.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
Kindly help me out in this regard.
Thanks in Advance,
SridharSridhar,
Check the path for the profile (whether it is accessible or not). Just to make sure that system has been installed properly, you could try connection check to the database also.
Thanks.
regards,
Murali -
ABAP or FM for post-processing of infopackage
Gurus,
Does anyone know the name of the ABAP program or function module that handles the post-processing of an info-package. For instance, we have an infopackage that needs to delete prior reqeusts where the selection criteria match. The infopackage is setup to perform the delete, and it works if we execute the infopackage manually. However we would like to run in the middle of a batch job that executes several ABAP programs. We already have an ABAP program that runs the BAPI to execute the infopackage, but it does not delete the prior request from our cube.
Note: We are running an old APO system (BW 2.1C), so we cannot use process chains.
Thanx in advance for your help.Roberto, thanks for your prompt reply (as always).
Actually, it seems that the deletion of the prior infopackage request is performed before executing the infopackage again (not after), I apologize. I will try your suggestion, though. If this is actually the correct FM, then I will award you full points!
I must admit, though, understanding the parameters of the FM are difficult. Can you aor anyone else provide more details?
Maybe you are looking for
-
I've just bought After Effects CS5. I've also bought a new Mac to run it on. So far, so good. Now, this new Mac is not going to be connected to the internet. I have another computer, (this one, a PC), that I use for all my internet activities. It's m
-
How to get iphones / ipad user agent for internet access
Hi. We recently setup some wireless, and I'm wondering how I can get iphones and ipads connected to the internet without prompting for a username and password. Even if it does prompt and we put in our domain credentials, things don't work.. it's like
-
Network adapter could not establish a connect from external server
hi, I've set up a jdbc thin driver properly using the following input: "jdbc:oracle:thin:@ipaddress:1521:DBname", "username", "password" When outside users try to connect externally (outside the network) there is a different ipaddress. Although they
-
How do you add a desk top icon to your desk top
You use to be able to right click on the mouse and get a box with several options, which included, one that ask if you wanted to place icon on your desk top, for the page you had up. I can no longer, using, Thunderbird find a tab for adding icons to
-
Sorting projects by date for syncing
I'm a new Aperture user and have recently imported a few years worth of iPhoto pictures. Everything went smoothly and I am really enjoying Aperture. I do, however, have one concern - syncing with iTunes. With iPhoto I could have the last 12 months ev