Swap axes doesn't work with dual axes chart types

Dear Colleagues,
I noticed that the function to 'swap axes' doesn't work with dual axes chart types.
This could be added as a hint to the Application Designer Guide, since it is not mentioned there.
Thanks, Katharina

Hi Katharina,
I recommend making this suggestion to a documentation update on Idea Place at ideas.sap.com
I like suggestions to the Help myself, something we should all do more often in my opinion
Tammy

Similar Messages

Apple Firewire to Thunderbolt doesn't work with my Infrasonic Deux sound card

Hello! My soundcard "Infrasonic Deux" doesn't work with Apple Thunderbolt to Firewire adaptor on my macbook pro 15 retina. On the other mac's the same problem! Via Firewire my soundcard work as well! but it doesn't work with Adapter! Help, please!

If you purchased an unlocked iPhone at an Apple store, it should be useable with any SIM. Its possible they just made a mistake and gave you the wrong model phone or there is something wrong with that phone. If that is the case, just take the phone and your receipt to an Apple store, explain the situation and they should swap it out for an actual unlocked one.

H67MA-E45 doesn't start with dual memory channel

I have just bought an H67MA-E45 motherboard and a brand new intel i5-2300 processor.
The pc works fine with a DDR3 1333 memory module on slot DIMM1 (as suggested in the manual),
but does not seem to work with dual memory channel at all.
When I install two same memory modules on DIMM1 and DIMM3 (dual channel configuration), I get the following problem: When I power on the computer, it turns on and instantly turns off. Then it powers on again on its own, but does nothing else. I get no beep error codes and the display doesn't show anything.
I use he on-board display adapter and I have only a sata II hard disk connected, nothing else.
Any suggestion what the problem might be?
Is there a way to check if there is a problem with the second memory channel?
PC details
Intel(R) Core(TM) I5-2300 CPU@280 GHz
MSI H67MA-E45 (ms-7678, Lga1155), Click BIOS, E7678IMS V1.2
KINGSTON KVR1333D3N9K2/4G DDR3 4GB (2X2GB) PC10666 1333MHZ
Intel HD Graphics (on board display adapter)
Seagate Baracuda 7200.9 ST3160811AS 160 GB SATA 2.0
Windows 7 Ultimate 32 bit
FSP AX500-A Blue Storm, +3.3V~30 A +5~28A +12~15A

My computer is now working only on one channel memory.
Every time I power the computer on, I get three short beeps, the third one is of slightly different tone. However, the manual does not have the beep codes written down, nor can I find them somewhere for the EFI BIOS (E7678IMS V1.2). Is there any link for the beep codes?
I tried mounting a single memory slot (KINGSTON KVR1333D3N9K2/2G DDR3 (1X2GB) PC10666 1333MHZ ) on DIMM 3 slot, for the second channel to work on its own. When I powered the computer on, I got the same problem, as if both slots DIMM 1 and DIMM 3 were populated. The mainboard turned on (without any beep code or display on screen) only to instantly turn off. Every while (about every four seconds) it tries to power on again on its own, without any intervention, but instantly turn off again. It may manage to stay turned on at one of the following iterations, without giving any beep code, displaying or loading anything.

Seconds_between doesn't work with variables in SQLScript

There is a sample procedure:
create procedure testproc
language SQLSCRIPT
as
l_curtime timestamp;
l_timedelta integer;
begin
select systimestamp into l_curtime from dual;
select seconds_between(:l_curtime, systimestamp) into l_timedelta from dual;
end;
It should return seconds between 2 timestamp values.
The code returns an error:
Could not execute 'create procedure testproc language SQLSCRIPT as l_curtime timestamp; l_timedelta integer; begin ...'
SAP DBTech JDBC: (at 160): inconsistent datatype: line 8 col 10 (at pos 160)
With «time» and «date» datatypes that's the same. So, seconds_between doesn't work with SQLScript variable (in this example, l_curtime). Is it a normal behaviour or supposed to be a bug?

Hello,
I can confirm same behavior - using variable inside seconds_between function leads to error. If you put there static string it is ok.
Of course you can always create "dummy" table (having 1 row with 1 column) where you will store the result of first call and then you will reference in second. But of course it is not that clean and it will be slower (especially if called many times).
But I would suggest to wait few more days - there should be SP03 released and everything can be different.
Tomas

PCI SCSI Doesn't work with GF4 4400

I swapped my old Herc GF2 out for the new MSI GF4 TI4400 card and found out that my PCI SCSI card doesn't work with it in. Swapped back in the GF2 and it works fine, and also works in a diff PC.
Flashed BIOS of my Abit KG7-RAID, no change...
?!

someone suggested this may have to do with a BIOS limitation about how much ROM space can be used for initialization routines such as video BIOS, mobo BIOS, and any other I/O cards such as the SCSI... Apparently most SCSI cards use 64K or so of memory at init and shrink back to like 16K or so....
Going to play with moving the cards around to change the order of initialization and we'll see if any change occurs...

Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.

you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

try xxx - may work
_may_ work.

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

Quicklook doesn't work with .avi files

Hello, i've got a little problem right here on my mac. The thing is that I used to have Snow Leopard as a OS and quicklook used to work great, it opened all the extensions I used to work with. The thing change when I format my HDD and installed a clean copy of Lion OS. Now quicklook works fine as it used to but not any more with .avi files. I remember that this feature was working great on my previous OS, and it's really important for me to find a solution because quicklook is an absolutely amazing feature of our Macs.
I've tryed to download plugins, restoring permissions or even trying it with a guest user, but no success.
Please help me. If you need more info about specs or something i'll be glad to give them to you.
Thank you!!!

Also doesn't work with Grapher (.gcx) documents (an Apple format).

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android phone worked perfectly with my car. Even the tech guy at Lexus couldn't get it to work. What is apple doing to fix this.

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android worked perfectly with my car. Even the tech specialist at Lexus couldn't get it to work. Lexus said that other iPhone 5s were having the same problem. What is apple doing to fix this?

Going to the local Apple store this morning...
My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

Satellite M40-129: PCMCIA Card doesn't work with Linux

I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?

Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck

HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password. One site said that Apple TV doesn't work with WPA which Uverse uses. Is there anyway around this or will Uverse and Apple TV just not work together.

Trying to set up Apple TV with ATT Uverse. I get errors when trying to enter my WiFi password. One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption. If true, does that mean Uverse subscribers cannot use Apple TV?

Spurs63 wrote:
does that mean Uverse subscribers cannot use Apple TV?
No, that's a rather silly conclusion.
There are two options:
stop using the crappy router provided by the ISP.
Physically connect the ATV to the router via Ethernet.

Swap axes doesn't work with dual axes chart types

Similar Messages

Maybe you are looking for