Swapping out G5 tower parts with another G5 tower?

I have a 2.0 Ghz Dual PowerPC G5 (3.0), 512 KB (L2), 4GB Ram with a 1Ghz bus (June 2004 model).
Serial # G8438CKYQPR
Is it possible to swap out the ram, video card and hard drive and put it into a 2.0/2.5Ghz Quad PowerPC G5 (Early - Late 2005 Models)?
Want to know if they are compatible before I have this attempted?
Any help or advice would be much appreciated.
Thanks,
BboyTV

Hi,
The Quad G5 is out, as well as the other Dual Core G5s, they use 533 MHz PC2-4200 DDR2 SDRAM, where the 2004s use 400 MHz PC3200 DDR SDRAM, & PCIe Video card instead of AGP video card on the 2004s.
The early 2005 Models should work, this is he fastest one...
http://www.everymac.com/systems/apple/powermac_g5/specs/powermac_g5_2.7_dp.html

Similar Messages

Is my iPad 3g locked to ATT or can I swap out the micro sim with another GSM carriers micro sim?

I travel with my iPad to Europe frequently and would like to know if I can swap sims with a local carrier and use their data plane while overseas.

The iPad is not sold as carrier locked - except for the Verizon iPad which doesn't have a SIM card anyway.

Can I switch out my current phone with another color?

Can I switch out my current phone with another color? I have black and I would prefer the silver. My parents got it for as a surprise so I didn't speak up and tell them I didn't like the color. So I have been using it for about a month. Can I just take the chip out and put it into another phone of a different color or no?

You can purchase an iPhone in any model, color, and capacity currently available.
You can purchase a case to put the device in and simply forget about the color of the device.

Can't get the attachment filename out of a Part (with non ascii characters)

Hello, all and happy new year :)
My issue is with non ascii filename in attachments... Yes i've read the FAQ : http://www.oracle.com/technetwork/java/faq-135477.html#encodefilename
I can't get the filename out of the BodyPart for those kind of attachments
here's my unit test :
     * contains various parts from various mailer encoded in different ways...
     private enum EncodedFileNamePart{
          OUTLOOK("Content-Type: text/plain;\n name=\"=?iso-8859-1?Q?c'estd=E9j=E0no=EBl=E7ac'estcool.txt?=\" \nContent-Transfer-Encoding: 7bit\nContent-Disposition: attachment;\n filename=\"=?iso-8859-1?Q?c'estd=E9j=E0no=EBl=E7ac'estcool.txt?=\" \n\nnoel 2010\n","c'estdéjànoëlçac'estcool.txt"),
          GMAIL("Content-Type: text/plain; charset=US-ASCII; name=\"=?ISO-8859-1?B?ZOlq4G5v62znYWNlc3Rjb29sLnR4dA==?=\"\nContent-Disposition: attachment; filename=\"=?ISO-8859-1?B?ZOlq4G5v62znYWNlc3Rjb29sLnR4dA==?=\"\nContent-Transfer-Encoding: base64\nX-Attachment-Id: f_giityr5r0\n\namluZ2xlIGJlbGxzIQo=\n","déjànoëlçacestcool.txt"),
          THUNDERBIRD("Content-Type: text/plain;\n name=\"=?ISO-8859-1?Q?d=E9j=E0no=EBl=E7acestcool=2Etxt?=\"\nContent-Transfer-Encoding: 7bit\nContent-Disposition: attachment;\n filename*0*=ISO-8859-1''%64%E9%6A%E0%6E%6F%EB%6C%E7%61%63%65%73%74%63%6F;\n filename*1*=%6F%6C%2E%74%78%74\n\njingle bells!\n","déjànoëlçacestcool.txt"),
          EVOLUTION("Content-Disposition: attachment; filename*=ISO-8859-1''d%E9j%E0no%EBl.txt\nContent-Type: text/plain; name*=ISO-8859-1''d%E9j%E0no%EBl.txt; charset=\"UTF-8\" \nContent-Transfer-Encoding: 7bit\n\njingle bells\n","déjànoël.txt"),
          String content=null;
          String target=null;
          private EncodedFileNamePart(String content,String target){
               this.content=content;
               this.target=target;
          public Part get(){
               try{
               ByteArrayInputStream bis = new ByteArrayInputStream(this.content.getBytes());
               Part part = new MimeBodyPart(bis);
               bis.close();
               return part;
               catch(Throwable e){
                    return null;
          public String getTarget(){
               return this.target;
     @Test
     public void testJavamailDecode() throws MessagingException, UnsupportedEncodingException{
          System.setProperty("mail.mime.encodefilename", "true");
          System.setProperty("mail.mime.decodefilename", "true");
          for(EncodedFileNamePart part : EncodedFileNamePart.values())
               assertEquals(part.name(),MimeUtility.decodeText(part.get().getFileName()),part.getTarget());
I take a NullPointerExcepion in the decodeText because getFileName() return null for the EVOLUTION case, and work well with OUTLOOK, THUNDERBIRD and GMAIL.
Evolution's content type is "Content-Disposition: attachment; filename*=ISO-8859-1''d%E9j%E0no%EBl.txt" wich doesn't look like the other (looks like the RFC 2616 or RFC5987 to do it.)
How can i handle this situation except by writting my own decoder?
Thanks for your answers!
Edited by: user13619058 on 4 janv. 2011 07:44

Set the System property "mail.mime.decodeparameters" to "true" to enable the RFC 2231 support.
See the javadocs for the javax.mail.internet package for the list of properties.
Yes, the FAQ entry should contain those details as well.

Swap a laptop hard drive with another laptop hard drive?

Can I swap a toshiba 17" laptop hard drive with a toshiba 15" laptop hard drive?

Laptop hard drives have been standardized in recent years. So they will fit and are electrically compatible.
What's on them is another matter. Windows is configured differently for each computer. So don't expect to boot existing software on another computer.
For more, give us the models. There is a label on the bottom.
-Jerry

Swapping out source video - working with low res versions

I have high-def sony m2t footage to edit.
I create a prpro project with edits, and I want to send to a collegue to tweak it. No problem.
However, I don't want to send them 30 gigs of source video, but 300mb of low res mp4 versions of the source video, so he can edit and work on timing and effects.
My challenge is that I when he returns the file, I must replace the footage and re-create all of the in/out markers on each clip, as well as the effects.
Is there a way to bulk replace footage in a project WHILE KEEPING the in/out cut, and the effects on each of the video bits? Or, keep the in/out and lose the effects - both are great solutions.
If I could get the same filename for the source video on my machine and the low-res version on his machine, it would be easy. The challenge is that my source video is *.m2t and the low-res versions are mp4, or flv, or mov.
Any ideas, workarounds, best practices for this?
Thanks!
Mark
cs5.5, win 7, i7-920, 12g ram, gt250 video, sony hc-1 camera

Couple thoughts:
Use AME to transcode your original M2T clips to more highly-compressed M2T clips. Drop the originals into the AME Queue, and change the Format to MPEG2 (not MPEG2-DVD). Start with the "1440 x 1080i 29.97 High Quality" preset (this may actually be automatically selected), and then go to the Multiplexer tab and change the Multiplexing option to "TS." Tweak the video encoding parameters (primarily bit rate) as necessary, and save the new versions out somewhere. This seemed to work in my single clip test, though the more highly-compressed file settings may need some experimentation to get smooth playback.
If you already have MP4s, try changing the extension to M2T. Yeah, it might actually work. You can do this really quickly on the Windows command line (don't know how on Mac) by running a simple command:ren *.mp4 *.m2t
In both cases, since the extension is the same, relinking should be fairly automatic.
Report how it goes!

Unable to figure out how to connect with another S...

First off, my Skype number keeps saying invalid. I have credit. Second, my profile reads my flour number is not active. I had this one originally #########. Yesterday I attempted to change it or add a new one #######. I was never given any type of confirmation as to whether my Skype number changed to the latter number 732... Or not. I can use either one it's just when the original wasn't working I thought I should try to change. I NEED TO CONNECT WITH SOMEONE IN THE UK who is also having difficulty on his end. His number he created to speak with me here is #######. His Skype name is xxxxx8 I am pending request to link to him. But why are my numbers telling me they're invalid? MUST I HAVE WIFI TO CONNECT? I do not of that's the case. My email is [email protected]
* mod edit: please do not post private information/email/ID *

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

Swapping out old Extreme N with new Extreme AC?

I am using a first gen Extreme N and a Express N for an extender/wireless printing.
I am going to get a new Extreme AC.
1.) What do I do to replace the Extreme N with the Extreme AC? Do I just unplug it, and swap the ethernet cable with the new AC and use Airport Utility to setup the new Extreme AC?
2.) If I name the new Extreme AC the same name as my Extreme N will my devices recognize it, or will they have to be each re-logged in?
3.) I currently have a few devices that have AC built in, like my MBP and iMac. What is the gain in speed when transferring files through Airdrop or just file sharing wirelessly on my network with AC vs. N?
Thanks.

The Apple sales rep told me that the vertical antenna design of the new Extreme AC vs. the flatter Extreme N is far superior and the reason that there is not an Express AC on the market is because it is not necessary to use an Express as an Extender now with the superior signal strength of the AC.
The antenna design is certainly an improvement, but stating that alone has obviated the use of the Express as an extender is a dubious conclusion to draw. That's the most charitable way I can put it. A less charitable reply would employ a popular colloquial expression describing the substance the Apple sales rep is full of, and it would be deleted by this site's Hosts.
Yes... though "much farther" is subjective. The only way to quantify it is to use it in one's own wireless environment.
Yes.

Swapping out old modem using existing Airport Extreme

I think my cable modem has burned out so I am swapping out the old modem with a new version fo the same modem and using existing my existing Airport Extreme - I thought I could just power everything off, plug in the new modem and then power back up but Airport is flashing orange. What step/s am I missing? Thanks very much!

Suggest that you try the following:
Power off everything again and wait at least 15 minutes. (Some cable companies...like mine....take even longer for the equipment back at the company to fully reset)
Power off means pulling the power cord from the back of the modem or unplugging the power cord from the wall.
Power up the cable modem and let it run by itself at least 2 minutes
Power up the AirPort Exteme the same way
Power up each network device one at a time about a minute apart
Check the network
If no luck, you will need to perform a Factory Default Reset on the AirPort Exreme and reconfigure it again.
Resetting an AirPort Base Station or Time Capsule FAQ
Be sure to use the same time of power down, power up sequence as above.

Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

Does the device get any signal?
Sounds like the device may have had a hardware failure. If it is out of warranty, the only option is the Out of Warranty replacement.
AppleCare is only an option if it is still under the original warranty.

Any tricks to swapping out my old time capsule with a new airport extreme I am also using airport expresses

Any tricks to swapping out my old time capsule with a new airport extreme I am also using airport expresses? The hard drive on the TC quit working.

I do plan on using an external USB HDD for time machine backups. I have both 802.11g and 802.11n used for playing music via stereos.
I would recommend against it. Apple does not support Time Machine backups to AirPort Disks (USB HDD attached to the AirPort Extreme). Although folks have done so, we get a number of them here asking for help with their corrupted backups. If your backups are critical to you, please use another means (like connecting the USB HDD directly to your Mac) to do so.

I created a new Apple ID for iCloud on my iPhone, but I can't seem to find a way to "sign out" or "log out" of that Apple ID (for iCloud) to sign in with another Apple ID. The only account login I could change was the Store. How do I "log out"

I created a new Apple ID for iCloud on my iPhone, but I can't seem to find a way to "sign out" or "log out" of that Apple ID (for iCloud) to sign in with another Apple ID. The only account login I could change was the Store.
How do I "log out" or "sign out" of iCloud on my iPhone? There is an option to delete the account, but I just want to log off. I want to keep the account name for future use.

@fernandamagalhaes
It looks like the article below has the information you are looking for.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Turn off iCloud completely
Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
On your iOS device’s Home screen, go to Settings > iCloud, then at the bottom of the screen, tap Delete Account.
Note: If you delete your iCloud account, iCloud will no longer back up your iOS data. You can still back up your device in iTunes (for more information, open iTunes and choose iTunes > Help).
On your Mac, open iCloud preferences, then click Sign Out.
If your Mac has OS X v10.7.5 and you turn off iCloud, your calendar information and reminders aren’t stored locally in iCal. If you want to retain your calendar and reminder information, you need to back it up before turning off iCloud. For more information, see the Apple Support article iCloud: Calendar & reminder data removed from Calendar and Reminders or iCal when disabling iCloud Calendar.
On your Windows computer, open the iCloud Control Panel, then click Sign Out.
Note: If you turned on automatic download of music, app, or book purchases (in iTunes preferences or in Settings on your iOS device), your iTunes purchases are still downloaded to your devices.
Set up iCloud on your devices

My usual iCloud account has been locked out. I tried the email link - didn't receive an email. So I created a new Apple ID with another email but now I can't access my other Apple ID Mail, etc..

My usual Apple ID/iCloud account has been locked out. I tried the email link - didn't receive an email. So I created a new Apple ID with another email but now I can't access my other Apple ID Mail, etc.. How do I get the Apple ID I want to use working again? Help.

Hi JkeeneSoldano,
Thank you for visiting Apple Support Communities.
To regain access to your Apple ID, try to reset your password using one of these methods:
Answer your security questions. Use these steps if you know the answers to your security questions.
Use email authentication. We'll send you an email that you can use to change your password.
Use two-step verification. If you set up two-step verification, you can use it to change your password. You just need your recovery key and a trusted device.
From:
If you forgot your Apple ID password - Apple Support
If you need to use the email verification method but don't receive the reset email, see this link for more help:
If you didn't receive your verification or reset email - Apple Support
Best Regards,
Jeremy

I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?

I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?

You may be able to find your Apple ID at Look up your old and forgotten Apple ID

Apple TV worked until today. Message says unsupported signal check your output device. I have checked hdmi cable with another device and it's fine. Put on a different tv and same message. Went out yesterday and bought a new Apple TV and same problem.

Apple TV worked until today. Message says unsupported signal check your output device. I have checked hdmi cable with another device and it's fine. Put on a different tv and same message. Went out yesterday and bought a new Apple TV and same problem.

Which TV do you have.
You may wish to try the following:
Press and hold the menu and the up button simultaneously on the remote for six seconds, the Apple TV should then begin to cycle through the various resolutions available to it at 20 second intervals.. If you see a picture appear up on your screen, use the remote to scroll down to the OK option and select it.

Swapping out G5 tower parts with another G5 tower?

Similar Messages

Maybe you are looking for