Swapping Out Master Files??

I recently shot about 800 images with a Canon G10 (which Apple does not support in RAW format). Using the JPG images from the RAW+JPG format in the camera I imported the images Aperture while on my trip so I could sort, rate and keyword the images. When I got home I found out that DNG converter now supports the G10 so I am in the process of converting copies of my RAW files to DNG. Is it possible to tell Aperture to point to the DNG referenced images instead of the .JPG? This way I can preserve all of my metadata that I gathered while on the trip. Also, would I be able to point Aperture to the original camera RAW files once Apple releases the RAW converters for the G10?
Thanks!

Similar Messages

How do I swap out jpgs for tiffs after importing a project edited in Pr, to AE?

the original Pr project was created from an image sequence of jpgs.
I'm doing stop motion using Dragonframe to capture the images and here's the workflow i was refered to
Dragon Frame (DF)
Capture in Hi-Res (RAW) and low res jpegs.
Export 720P file for editing in Premiere (establish file name).
Light Room (LR)
Resize RAW files to 2K(tiff), flatten image
Export 2K image sequences (name the same as 720P files)
Premiere (PR)
Cut 720P files to a picture lock.
After Effects (AE)
Import Premiere project.
Swap out 720P files for 2K(tif) image sequences.
Work on shots as compositions.
Composite environmental elements.
Remove rigs.
Export final project.</li>
</ul>

File --> Replace Footage
Mylenium

Quick swapping of FLV files

Hello,
What I am looking to do is swap out .FLV files quickly to
create an instant response to an action. Lets say I have a loop of
a person standing in one spot, and I have 10 different possible
.FLV files that could play. When the user clicks on a place on the
stage, the appropriate video plays that walks the person over to
that spot. I have tried loading the other files in the background,
and using a movie clip with 10 different frames, each with a
different flv in it, but that doesn't seem to work. I want to
create the illusion of instant response, so there can't be a blank
moment before the next .FLV loads. I did have some success if all
10 of the videos are loaded on each frame, with the primary one
center stage, and the rest offstage with x at 2000 or something,
but if I need to change one thing, then I have to change all 10
frames, and it gets tedious, plus it doesn't seem like the best way
to do things. Is there a way to load an FLV into memory so that
when a movie clip moves to a frame where the video lives, it will
load instantly? Am I making a mistake using the FLV playback
component? Should I be coding the whole loading differently? I also
will have this living on a stand alone computer, so there is no
need to download files, just load them from a local directory. Any
thoughts are appreciated, and I have looked at the threads about
preloading video, but they don't seem to accomplish what I am
trying to do. I am using CS3 but with ActionScript 2. Thanks...
- B

No you can't do this on multiple files.
But you can use File>>Add folder to library to add the whole folder.
Then you remove the dead tracks - but loose counts and ratings etc.
You can even add the whole iTunes Music folder and it will not create duplicates of files it already knows about.
Removing dead tracks
Using a playlist to collect dead tracks.
Create new regular playlist – Playlist1
Select whole library and drag to Playlist1
Create new Smart Playlist with the rule: Playlist is not Playlist1
This playlist should contain all the dead tracks
http://discussions.apple.com/message.jspa?messageID=5696793#5696793
Or you can use a Robert Jacobson script - iTunesremovenotfound at:
http://home.comcast.net/~teridon73/itunesscripts/

Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
It think it gives this error message when i reach 24% everytime during export.
So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
Taphabit

boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
is there any way of preemptively avoiding it in future projects?
thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

How to swap out an image in a .fla file

Hi,
I have an existing .swf movie and I aquired the .fla files to make edits. I found the image I want to swap out but I am not sure how to do it. I was planning on using Flash Pro to make the edit. Any help would be greatly appreciated.
Thank you,
Ashley

Hi,
Thanks for your reply. I tried 'right-clicking' on the actual image on the stage and saw an option to 'swap bitmap' so I did that and it swapped the image for the one I wanted to replace it with. I am still not sure how to do it the way you described but at least this way worked. Now, do I just save and reupload the swf, fla and the new image I swapped it for?
Thanks!

Sample Applescript: scraping values from numbers files into a master file

Hi, I have programming experience in c and other languages, but am new to applescript and so am learning a lot from this forum.
My goal is to make a timesheet system for my Dad (for a bday present) where every time he helps a client, he fills out a newly created numbers file - and after a week or so, he can run a script that scrapes certain values from each numbers file and places it into a master numbers file. Then saving and closing the file.
Vince, it sounds like you've written a script that does this feature of looping through all numbers files in a folder and putting select values from each numbers file into a master numbers file (after clearing the previous values of the master file).
Specifically, I'm looking for a sample script that opens up a numbers file, clears its table, then fills this table by scraping one value from a particular cell in every numbers file in a folder.
If anyone has a similar script they would be willing to post or email to me, for me to use as a foundation and to learn from, I would be very very very grateful. My email is forman.jq at gmail dot com.

I guess that this script may be a good starting point.
--[SCRIPT fromfolder_2spreadsheet1]
The target spreadsheet must be open at front and must contain the sheet sheet_destination which much contain the table table_destination.
Choose the folder supposed to store the source sopreadsheets.
Yvan KOENIG (VALLAURIS, France)
2010/08/18
--=====
(* Edit these height properties to fit your needs *)
property destination : "destinationDoc.numbers"
property sheet_destination : "destination"
property table_destination : "insert here"
property premierelignedestination : 2
property colonne_destination : 2
property ledossierhabituel : "Macintosh HD Maxtor:Users:yvan_koenig:Desktop:dossier habituel:"
property ligne_source : 2
property colonne_source : 2
--=====
on run
my activateGUIscripting()
Select the folder storing the spreadsheets from which we will extract values *)
set dossier_source to choose folder with prompt "Choose folder storing the Numbers documents…" default location (ledossierhabituel as alias)
Build a list of disk items available in the selected folder *)
tell application "System Events"
set les_elements to every disk item of folder (dossier_source as text) --whose (get type identifier) is in
set les_tableurs to {}
Extracts the list of the Numbers spreadsheets available in the selected folder *)
repeat with refsurelement in les_elements
if type identifier of refsurelement is in {"com.apple.iwork.numbers.numbers", "com.apple.iwork.numbers.sffnumbers"} then
copy path of refsurelement to end of les_tableurs
end if
end repeat
end tell -- System Events
if les_tableurs is {} then
No Numbers documents available so we stop the process. *)
set rapport to "The folder “" & dossier_source & "” doesn’t contain Numbers documents !"
else
set rapport to {}
end if
Check that the target Numbers document is open at front
and that it embed the defined sheet embedding the defined table. *)
tell application "Numbers"
activate
set existants to name of documents
if destination is not in existants then
copy "The document " & destination & " is not open !" to end of rapport
else
tell document destination
if sheet_destination is not in (name of sheets) then
copy "the sheet " & sheet_destination & " is unavailable in the document " & destination & " !" to end of rapport
else
tell sheet sheet_destination
if table_destination is not in (name of tables) then copy "The table " & table_destination & " is unavailable in the sheet " & sheet_destination & " of the document " & destination & " !" to end of rapport
end tell -- sheetSource
end if
end tell --document destination
end if
If target document is not at front or if it doesn't match the defined requirements,
we quit the process. *)
if rapport is not {} then error my recolle(rapport, return)
Clean the target table, minus row 1 supposed to be storing columns headers *)
tell document destination to tell sheet sheet_destination to tell table table_destination
set selection range to range ("A2 : " & name of last cell)
end tell --document destination
end tell -- Numbers
my selectMenu("Numbers", 4, 9) (* Suppress *)
set liste_valeurs to {}
tell application "Numbers"
repeat with un_tableur in les_tableurs
Open the spreadsheets and extract from each of them the wanted value *)
open un_tableur
tell document 1 to tell sheet 1 to tell table 1
set une_valeur to value of cell 2 of column 2
end tell
if une_valeur is 0.0 then
copy "empty" to end of liste_valeurs
else
copy une_valeur as text to end of liste_valeurs
end if
close document 1
end repeat
Now, it's time to insert the values in the target table *)
set ligne_destination to premierelignedestination
tell document destination to tell sheet sheet_destination to tell table table_destination
repeat with une_valeur in liste_valeurs
if not (exists row ligne_destination) then add row below last row
if une_valeur is not "empty" then
set value of cell ligne_destination of column colonne_destination to une_valeur
end if
set ligne_destination to ligne_destination + 1
end repeat
end tell -- document destination
save document destination
end tell -- Numbers
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
my selectMenu("Pages",5, 12)
==== Uses GUIscripting ====
on selectMenu(theApp, mt, mi)
tell application theApp
activate
tell application "System Events" to tell process theApp to tell menu bar 1 to ¬
tell menu bar item mt to tell menu 1 to click menu item mi
end tell -- application theApp
end selectMenu
--=====
--[/SCRIPT]
I apologize, I'm too busy to write more explanations.
Yvan KOENIG (VALLAURIS, France) mercredi 18 août 2010 21:38:04

Can I configure to always delete the master file?

Hi!
If I want to delete a file, I don't just remove it from the cataloge, but to delete the master file, too.
If I use the remove key, I get the (annoying) pop up, what I want to do: (sorry, I've a german version, so I just try to translate it)
Delete from hard disk
Remove (default selected)
Cancel
Is there any chance to avoid this dialog? Or at least to chance the preselected button, so I've just to use the enter key?
Actually I've to
press delete
press left arrow key
press enter
That is a little bit annoying and error-prone
Thanks a lot!
P.S.: I just found out, that ALT+DELETE is a shurtcut to remove the file from the catalog. So it would be greate to have a similar shurtcut to delete the file from the filesystem.

Thanks!
But it is almost the same as CTRL+ALT+DELETE, which has a special meaning in Windows :-(
So there is no way, to get a delete action, that easiliy deletes, without pressing four keys in parallel? :-|
Perhaps, the developers of Lightroom could provide an option, so you get the pop up, but the default action is different. That would be really great.

Error message when creating a Master File

I have finished editing a multicam clip of a graduation ceremony which is an hour and 27 minutes long. Clients are anxiously awaiting the DVDs/BR discs.
There are six "Rotation" and one "Ribbon" titles and 21 chapter markers in the timeline. None of the chapter markers are placed in a transition.
I'm using 10.0.8 FCPX and OS 10.6.8.
I've tried to create Master File in order to use Toast 11 titanium to make a Blu Ray disc but I've had the following message appear twice midway through the process:
The operation could not be completed because an error occurred when creating frame 152526 (error -1).
Any suggestions as to what I might do to resolve this will be greatly appreciated. Or is there is another method to create a Blu Ray disc, I'd appreciate info.
Thanks,
Gary

Go to Preferences and turn off Background Rendering.
Select your project in the library and in the File menu, click on Delete project Render Files; choose All when prompted. Select your event and do the same with the event Render files. In the project use the range tool to select a short section. Try to export that as a test. Don't render before you export.
If that doesn't work, copy the project and paste it into a fresh project. Try another export test.
If that doesn't work, create a new user account.
As for Blu Ray, there is a Share preset if want to check it out. Very simple menus. And the preset can only handle single tracks.
Good luck.
Russ

Error saving master file

i'm trying to export jpegs to an external hard drive from aperture library, and repeatedly get error msg "there was an error saving master file." any ideas???

Hi Salman,
Thanks for posting this issue,
Just remove this below given tag and check out. It might be happened that your control is conflicting with others.
Also, browse the below mentioned URL for more details
http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
I hope this is helpful to you. If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

How to reconnect master files in recovered folder to Aperture

Aperture 3 crashed and somehow it spit out all its master files and dumped them in a directory called 'Pictures Recovered Photos'. All files in Aperture show the 'Master Not Found' badge (arrow with yellow exclamation point triangle). How do I tell Aperture that the master file it's looking for sits in the 'Pictures Recovered Photos' folder?
I tried the 'Locate Referenced Files' command but that obviously doesn't work because the pictures are not referenced. The master files were imported before something went wrong.
To make matters worse, the 'Pictures Recovered Photos' folder contains about 56k files, while I only have about 13k masters. Upon further inspection, I noticed that most masters had several copies of themselves:
e.g. here are all the files matching picture DSC00131 in the 'Pictures Recovered Photos' folder:
DSC00131.JPG
DSC00131.JPG.jpg
DSC00131.JPG_2.jpg
thumb_DSC00131.JPG.jpg
thumb_DSC00131.JPG_2.jpg
thumb_DSC00131.JPG_face0.jpg
thumb_DSC00131.JPG_face0_2.jpg
thumb_DSC00131.JPG_face1.jpg
thumb_DSC00131.JPG_face1_2.jpg
thumb_DSC00131.JPG_face2.jpg
thumb_DSC00131.JPG_face2_2.jpg
Any suggestions on how to get out of this mess?

First wanted to see if someone had seen this situation before
The subject of Aperture completely aside, it is not uncommon for files to sprout in unexpected places when there are disk problems. If you have not already done so you should use Disk Utility to Verify the disk(s) where your masters and Aperture app and library reside before you attempt to do anything else. While you are in Disk Utility check the S.M.A.R.T status as well. If you try to fix things within Aperture you could make things worse if your disks aren't in tip-top shape.
I'm new to Aperture so I will leave advice on how to relocate your masters to experienced users.

Aperture was not able to adjust the date and time of the master file "2008-06-22 at 14-41-14.jpg" because it has a format that does not permit date modification.

I can't seem to find a way to update the date/time of a master file. There is a format issue but I can't seem to figure out how to correct it.
Aperture was not able to adjust the date and time of the master file “2008-06-22 at 14-41-14.jpg” because it has a format that does not permit date modification.

Can you post an ipconfig /all from the server and the DC?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

If I have a bootable copy of a disk running 10.4.11, is there any reason I can't swap out the internal drive of a newly purchased Mac Pro and have it boot from the tiger disk? Thanks very much for any insight.

or is there some sort of built in protection against this.

In addition, if you are talking about an older machine like a G4 or earlier with PATA drives, the Mac Pro uses SATA drives, so this is not a simple swap out, but if there's room an adapter like this might work in that situation:
http://eshop.macsales.com/item/Sonnet%20Technology/TPASA/
so that you could use the drive in the new computer to copy the data files, not for booting the OS.
If you need to transfer files from one machine to the other, you could do this over a network, or use FW target drive mode, or get a universal bare drive cable adapter.
http://eshop.macsales.com/item/Newer%20Technology/U3NVSPATA/

Why, when exporting as master file from FCX, I have problem with sync

I edited all audio of a short movie in protools, bounced a stereo file, imported it in final cut and shared the master file at prores 422, from there through compressor I have created 2 files (mpeg 2 and ac3) and burnt a dvd but seems always to be out of sync , why?
fortunately i still have dvd studio pro that allow me to "nudge" the audio to fix the problem, but all this is quite time consuming.
any advice?

I have fixed some issue about audio and video, created a new project with correct sample rate, imported the master video at same frame rate, and in pt bounced a new track of audio, so no orange bar, everything fine in FCX,AUDIO AND VIDEO PERFECTLY IN SYNC. i exported a master file at best current setting and in compressor have created a dvd setup hi quality, 2 pass vbr encoding mode etc
and.. imported the m2v file and ac3 in DVD STUDIO PRO, and on time line i hear out of sync, now i don't know if the problem happen during the encoding in compressor or is dvd studio pro.

Sharing master files with Lightroom 4

Several years ago I used Aperture and ended up switching to LR4, but miss a few of the features of Aperture. I am trying to figure out a way of using Aperture to access some of my master files without having to duplicate my master files from LR4. It is my understanding that if I import files into Aperture that the images go into a specific Aperture Library. What I really liked about LR was that my master files could sit where ever I wanted them and the application only accessed the files rather than stowed the masters into a unique application library.

You can import images into Aperture as referenced originals, and reference them in their original location, without moving them into the aperture library. Only you must not move them, rename them, edit them in any way after importing them into Aperture, for that will break the connection between the version in Aperture and the referenced original master.
See: Aperture 3 User Manual: Working with Referenced Images
Regards
Léonie

Missing master files in Aperture 2

I (like a lot of others on here!) am having trouble with my photos in Aperture 2 displaying the yellow exclamation mark and grey arrow badge.
When I go to File > Relocate Master..., I get a message saying they cannot be found.
I searched on one photo's filename through spotlight and found the images in "User"/Pictures/Merged Libray (which is the name of my iPhoto library)/Masters/ then a string of numbered subfolders, 2011/04/12/ etc.
BUT when I go back to Aperture and go to File > Manage Referenced Files in order to reconnect them (is this right??), the folder "Masters" of my iPhoto library does not appear in the bottom navigation pane of the Aperture dialog box. I can navigate to the Masters folder through Finder by asking to "Show package contents" for iPhoto, but this is not an option in the Aperture window.
Does anyone know how I could fix this? Could I perhaps copy the iPhoto "Masters" folder files, create a new folder on the desktop or some such, and ask Aperture to speak with them? That seems a bit convoluted.! :S Hope someone can help!
I am on a 15" MacBook Pro, OS X 10.6.7, Aperture 2.
Cheers

A mistake I used to make that resulted in this is when I import photos, not double checking the option to save them into the Aperture library, or leave them where they already are on the hard drive. Then, I'd delete the originals, and bang, exclamation points.
If Aperture says there's no physical Master file anymore, then there's not. Back track and figure out when/where you moved the originals or if you deleted them. It's always safer to doube check an import is placing the Masters into Aperture's own library.
If they're in iPhoto now, delete them from Aperture, re-import them from iPhoto.

Swapping Out Master Files??

Similar Messages

Maybe you are looking for