SWF error- while generating the flash files.

Post Author: [email protected]
CA Forum: Xcelsius and Live Office
Hi, in the old forum I came across the folowing topic: SWF error- while generating the flash files.
As I have the same problem, I would like to know the solution / answer / meaning please. What do I have to change in order to let in function properly again.
Thanks anyone.
Femke
(The post is from 3/6/2007)
The following error is generated upon generating the flash files Any insight???SWF error- while generating the flash files.--ErrorSWF Function Overflow. The generated SWF will not function correctly because data dependencies go beyond SWF limits.--
OK -

Post Author: Andres
CA Forum: Xcelsius and Live Office
Hello.
I'm having the same problem. It appeared after I made use of many cells (a table of 10x200 cells) with formulas inside them.
Before that, while I was making my tests and only used a few cells and the .XLF file was 4Mb, I had no problem. Now that the .XLF file is 8Mb I see this error appearing (in Spanish):
"Error
Desbordamiento de la función SWF. El archivo SWF generado no funcionará correctamente ya que las dependencias de datos superan los límites de SWF."
Any idea of how this could be resolved (appart from using less data)?
Thanks in advance.

Similar Messages

  • Could not generate the flash file(SWF)

    Hi all,
    I am working with a Dashboard having a GMap plugin and it was working fine on BO server.
    But now the plugin has been changed from GMap to CMaps plugin. I am able to download the same dashboard from BO Server to my desktop.
    The snapshot of the warning I get while downloading the dashboard has been attached.
    When downloaded from server, in place of displaying map on GMap plugin I get a warning "Invalid request this request is invalid" but when i open its properties the warning goes and the map appears back.
    Then I tried to upload the same dashboard on BO Server and I get an error "Could not generate the flash file(SWF)...". The snapshot of the same has been attached.
    I am unable to do any modification on this Dashboard.
    Regards

    Hi,
    In your discussion,you have downloaded the dashboard file from the BO server to your desktop.
    You can export the dashboard to BO Server in SWF format.But how can you download the physical dashboard file from BO server.Is it possible?
    Do the changes in .xlf physical file and export the .xlf file to BO server as File-->Save to platform.
    Regards,
    Venkat P

  • Bursting Program errors with "Error while generating the Document"

    Hello Folks
    Here is my bursting control file
    <?xml version="1.0" encoding="UTF-8"?>
    <xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
    <xapi:globalData location="stream">
    </xapi:globalData >
    <xapi:request select="/XMLEXCEL1/LIST_G_Q0">
    <xapi:delivery>
    <xapi:email server="mycompany.com" port="25" from="[email protected]"
    reply-to ="[email protected]">
    <xapi:message id="1234" to="[email protected]"
    attachment="true" content-type="html/text"
    subject="Employee Report for Empno"> Dear
    Please review the attached document</xapi:message>
    </xapi:email>
    </xapi:delivery>
    <xapi:document key="123" output-type="XLS" delivery="1234"
    output="XMLEXCEL1" >
    <xapi:template type="RTF" location="xdo://AR.XMLEXCEL1.en.00/?getSource=true">
    </xapi:template>
    </xapi:document>
    </xapi:request>
    </xapi:requestset>
    this is the output of bursting status report:
    <?xml version="1.0" encoding="UTF-8"?>
    <BURS_REPORT><REQUESTID>40403415</REQUESTID>
    <PARENT_REQUESTID>40403339</PARENT_REQUESTID>
    <REPORT_DESC>XMLEXCEL1</REPORT_DESC>
    <OUTPUT_FILE>/opt/local/application/orafin/applmgr/out/outfaud/S1759.zip
    </OUTPUT_FILE>
    <DOCUMENT_STATUS>
    <KEY>123</KEY>
    <OUTPUT_TYPE>XLS</OUTPUT_TYPE>
    <DELIVERY></DELIVERY>
    <OUTPUT>
    </OUTPUT>
    <STATUS>fail</STATUS>
    <LOG>Error while generating the Document...</LOG>
    </DOCUMENT_STATUS>
    </BURS_REPORT>
    Can anyone help on this please.

    can anyone help me?

  • Error while generating the Document...  Bursting Status Report

    Hey all,
    I am getting some errors in a production environment when trying to burst out some invoice data.
    This process has been pretty robust and out of 1000+ invoices a day, I can only find 4 that are failing regularily.
    Why am I mentioning?, just to show that I am thinking this is a data issue, but just cannot see anything that stands out.
    I can take the xml output and run it through my development suite on my local machine and all runs fine.
    Just when it is running live through the db is when it fails.
    Here is the Bursting output that shows the error....
    <?xml version="1.0" encoding="UTF-8"?>
    <BURS_REPORT>
    <REQUESTID>27044820</REQUESTID>
    <PARENT_REQUESTID>27044726</PARENT_REQUESTID>
    <REPORT_DESC>Invoice Print Selected Invoices</REPORT_DESC>
    <OUTPUT_FILE>[$OUT_DIR]/o27044820.zip</OUTPUT_FILE>
    <DOCUMENT_STATUS>
    <KEY></KEY>
    <OUTPUT_TYPE>pdf</OUTPUT_TYPE>
    <DELIVERY></DELIVERY>
    <OUTPUT></OUTPUT>
    <STATUS>fail</STATUS>
    <LOG>Error while generating the Document...</LOG>
    </DOCUMENT_STATUS>
    </BURS_REPORT>
    The problem is that this output doesn't necessarily help, nor can I find any hints in the OPP logs.
    So... the question becomes...
    Any ideas on where I can look to resolve this issue?+
    Or where I can find any clues at, that would possible point at the issue?+
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    BI Publisher 5.6.3
    Thanks
    Hayden,

    Tim,
    Thanks for the suggestion, always seems to slip my mind that the Bursting Report has debug on it.
    As far as what is generating the XML, it is oracle's standard, only slightly modified ... ;), invoice generating report, RAXINV_SEL.
    Well RAXINV_SEL, or RAXINV_NEW, doesn't matter, same code, that is the executable.
    I have turned on the debug, for both the source xml and the burst request, and unfortunately, still nothing stands out to me.
    I was really expecting to see something in the burst log, pasted at the bottom...
    but, it yet avoids me.
    If I had to guess, I would bet the user went, in our terminology, "slashwit crazy", or example "model /w options", in some description.
    But can't seem to find which field it is blowing up on, since we are catching these special characters in several places already, and slashwit is littered throughout the output.
    I was also looking in the bursting control file for the special xml tags identified there, as those would require no slashes. But those are all clean.
    Hayden,
    XML Publisher: Version : 11.5.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XDOBURSTREP module: XML Publisher Report Bursting Program
    Current system time is 21-SEP-2009 10:43:12
    XML/BI Publisher Version : 5.6.3
    Request ID: 27048106
    All Parameters: ReportRequestID=27044726:DebugFlag=Y
    Report Req ID: 27044726
    Debug Flag: Y
    Updating request description
    Updated description
    Retrieving XML request information
    Node Name:{node}
    Preparing parameters
    null output =/u007/app/applmgr/{instance}/out/{instance}/o27048106.out
    inputfilename =/u007/app/applmgr/{instance}/out/{instance}/o27044726.out
    Data XML File:/u007/app/applmgr/{instance}/out/{instance}/o27044726.out
    Set Bursting parameters..
    Temp. Directory:/u007/app/applmgr/{instance}/temp
    [092109_104315337][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
    [092109_104315340][][STATEMENT] setOAProperties called..
    Bursting propertes.....
    {burstng-source=EBS, font.Free 3 of 9.normal.normal=truetype./usr/java/jre/lib/fonts/FREE3OF9.TTF, font.Times New Roman.normal.normal=truetype./usr/java/jre/lib/fonts/TIMES.TTF, system-temp-dir=/u007/app/applmgr/{instance}/temp, font.Arial.italic.normal=truetype./usr/java/jre/lib/fonts/ARIALI.TTF, user-variable:cp:parent_request_id=27044726, user-variable:cp:application_short_name=XDO, font.Courier New.normal.bold=truetype./usr/java/jre/lib/fonts/COURBD.TTF, font.Times New Roman.normal.bold=truetype./usr/java/jre/lib/fonts/TIMESBD.TTF, user-variable:cp:request_id=27048106, font.Arial.normal.normal=truetype./usr/java/jre/lib/fonts/ARIAL.TTF, font.Courier New.normal.normal=truetype./usr/java/jre/lib/fonts/COUR.TTF, user-variable.OA_MEDIA=http://diierp.corio.com:8002/OA_MEDIA, font.Courier New.italic.bold=truetype./usr/java/jre/lib/fonts/COURBI.TTF, user-variable:cp:org_id=83, user-variable:cp:DebugFlag=Y, font.Times New Roman.italic.bold=truetype./usr/java/jre/lib/fonts/TIMESBI.TTF, user-variable:cp:responsibility=51270, font.Arial.italic.bold=truetype./usr/java/jre/lib/fonts/ARIALBI.TTF, font.Courier New.italic.normal=truetype./usr/java/jre/lib/fonts/COURI.TTF, user-variable:cp:user=HAYDEN, user-variable:cp:reportdescription=Invoice Print Selected Invoices, user-variable:cp:language=en, font.Times New Roman.italic.normal=truetype./usr/java/jre/lib/fonts/TIMESI.TTF, user-variable:cp:ReportRequestID=27044726, user-variable:cp:locale=en-US, user-variable:cp:territory=US, font.Arial.normal.bold=truetype./usr/java/jre/lib/fonts/ARIALBD.TTF}
    Start bursting process..
    Bursting process complete..
    Generating Bursting Status Report..
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 27048106 on node {node} at 21-SEP-2009 10:43:19.
    Post-processing of request 27048106 completed at 21-SEP-2009 10:43:20.
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 21-SEP-2009 10:43:20
    ---------------------------------------------------------------------------

  • ODI 20088:Error While Generating The Scenario

    Hi,
    Today I have change the name my logical file schema(name is change to lower to upper case).Then select the new schema from File Model (only it is using the File Schema).Then Try to generate the scenario again but getting an error like this:
    ODI 20088:Error While Generating The Scenario
    java.lang.NullPointerException
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatPopSourceSet(SnpGeneratorSQLCIT.java:7990)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatJobPopCollectionBuild(SnpGeneratorSQLCIT.java:7726)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.preComputePop(SnpGeneratorSQLCIT.java:7668)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatJobPop(SnpGeneratorSQLCIT.java:7568)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatPackageStep(SnpGeneratorSQLCIT.java:10477)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageScenario(SnpGeneratorSQLCIT.java:2883)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageScenario(SnpGeneratorSQLCIT.java:2817)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenScenSourceScenario(SnpGeneratorSQLCIT.java:11481)
         at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenScenSourceScenario(SnpGeneratorSQLCIT.java:11505)
         at com.sunopsis.graphical.dialog.SnpsDialogScen.generateScen(SnpsDialogScen.java:190)
         at com.sunopsis.graphical.scenario.DwgScenGeneratingWizard.generate(DwgScenGeneratingWizard.java:68)
         at oracle.odi.ui.action.SnpsPopupActionGenerateScenHandler.actionPerformed(SnpsPopupActionGenerateScenHandler.java:103)
         at oracle.odi.ui.SnpsActionControler.handleEvent(SnpsActionControler.java:86)
         at oracle.ide.controller.IdeAction.performAction(IdeAction.java:529)
         at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:897)
         at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:501)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
         at java.awt.Component.processMouseEvent(Component.java:6297)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3275)
         at java.awt.Component.processEvent(Component.java:6062)
         at java.awt.Container.processEvent(Container.java:2039)
         at java.awt.Component.dispatchEventImpl(Component.java:4660)
         at java.awt.Container.dispatchEventImpl(Container.java:2097)
         at java.awt.Component.dispatchEvent(Component.java:4488)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4236)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4166)
         at java.awt.Container.dispatchEventImpl(Container.java:2083)
         at java.awt.Window.dispatchEventImpl(Window.java:2489)
         at java.awt.Component.dispatchEvent(Component.java:4488)
         at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:668)
         at java.awt.EventQueue.access$400(EventQueue.java:81)
         at java.awt.EventQueue$2.run(EventQueue.java:627)
         at java.awt.EventQueue$2.run(EventQueue.java:625)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
         at java.awt.EventQueue$3.run(EventQueue.java:641)
         at java.awt.EventQueue$3.run(EventQueue.java:639)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:638)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    Please Help
    Thanks
    Anindya

    If you have not deleted the old file schema, then it should have been work but it seems to be theissues with the link between interface and model .
    I cannot say this is the actual reason but it might be. Since you have draged the file datastore to interface, interface is probably pointing to old schema and file model is pointing new schema.
    I guess you have to recreate the interface again. Let me know how it is going with you
    Bhabani
    http://dwteam.in

  • ERROR WHILE GENERATING THE PDF

    HI gurus,
    We are trying to publish BI reports in the Portal server as Iviews.
    In the portal system, when I am clicking the PRINT VERSION button for the
    CO&#61664; cost center (area): Plan/actual: Quarterly iview, it’s giving the PDF file,
    that’s well and good.
    <b>But when if I am doing the same thing for other iviews, for example: say the  iview (CO&#61664;cost center range: Transaction Drill-down).
    I am getting the “ERROR WHILE GENERATING THE PDF”</b>
    The question is : <i>it’s working for some standard iviews and giving error message to other std. iviews.</i>
    Please suggest how to resolve this issue.
    Regards,
    Prasad

    Dear Prasad,
    Did you resolve your problem, I have the similar one:
    I need to print report made in BEx Report Designer and executed on Portal, but when I press Print Version button I am getting next message:
    Error while generating PDF
    Any information is much appreciated
    Thanks in advance and best regards
    Vladimir

  • Error while generating the report on Test env (for divide condition)

    Hi All,
    I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
    Actually the error is coming for the below logics:
    COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
    "RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
    Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
    Thanks in advance

    Is anyone having any idea about it...

  • Error while generating the Infoset

    Dear SD Experts,
    I get the Error While Generating the Infoset.
    I am actually trying to write a Query.
    the tables i have inserted are VBAK, VBAP, VBEP, LIKP, LIPS
    below is the List.
    1)Differences in field TEXT_VBAP_CHARG
    2)Differences in field TEXT_VBEP_ETENR
    3)Differences in field TEXT_VBEP_ETENE
    4)Differences in field TEXT_VBEP_PLNUM
    5)Differences in field TEXT_LIPS_CHARG
    6)Differences in field TEXT_LIPS_LGPLA
    Thanks in Advance.
    Regards,
    Santa Khattri.

    Hi ,
    From what you are saying, i am guessing there could be difference in field types used and in dictionary.
    Try this.
    1.Go to SQ02
    2.Change query area (Standard / Global) in Environment --> Query areas depending on where your infoset is.
    3. Select your Infoset.
    4. Goto --> More functions --> Check and generate / consistency check --> Adjust.
    or Try this.
    1. Select your infoset.
    2. Change
    3. Goto --> Global properties --> see if "no automatic text recognition" is checked in options tab.
    If you still having problems, give me more detail on how have you joined tables, have you used any extra fields, or have you done any coding in Infoset, I may be able to help you.
    Thank you.
    Regards,
    Subin John.

  • Error while generating the context node

    Hi ,
    Requirement is to add the marketing attribute field under the Account details overview Page. As the field was not available in the context node i have added a new context node in the Account details. I used the wizard and added the context node BuilmktattributeRel so as i can add "Attribute set" under the BP overview page."
    Now after adding the context node and while executing i am unable to see the overview view page, i am getting an error :
    1. Component GET_ATTRIBUTE does not exist
    2. Determination of BOL attributes failed
    Also i am unable to regenrate the GET_I_method. If i want to delete the Zcontextnode, i am unable to do so.
    Kindly help me with the technical approach to add the context node in the overview page.
    Thanks in advance,
    Sunil

    One thread would have been sufficient.
    Error while generating the context node

  • Error while loading the WSLD file

    Hi all
    I am trying to consume a Webservice. When i try to create the Model out of the WSDL file, it says "Error while loading the WSDL file".
    Its an XI webservice, so i cannot view it from Webservice navigator.
    How could i find out that, the problem is with the Webservice or i am missing any thing
    Kindly help
    regards
    Deepu

    Hi
    I checked the log and i am getting the following exceptions
    1.DynamicProxy.TempDir=C:\DOCUME1\DEEPUM1\LOCALS~1\Temp\, DynamicProxy.INetProxy.Host=}'
         at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
    Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model.
    2. Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Invalid Response Code: (401) Unauthorized. The requested URL was:"http://Pinnacle:50000/XISOAPAdapter/MessageServlet?channel=:PowerEP_BusService:Out_SOAP_DocViewDownload" -> com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL
    3. java.lang.NullPointerException
         at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DOperationImpl.initParameters_DocumentStyle(DOperationImpl.java:59)
    Is this any authorization problem
    regards
    Deepu

  • Error while updating the configuration files (MOB20003)

    hi,
    After installing the BI 4.0 server, i am trying to configure mobile using mobile server configuration tool. When i enter all the information for non Blackberry option as i would like to access through ipad, its giving me the error message" Error while updating the configuration files (MOB20003)" Please advise.

    Hi Somesh,
    If i am not wrong, only a war file deployment is needed to make ipad work.
    This happens with URL hitting directly on the Server.
    If you want to configure VAS and VMS servers, let us know what configuration settings have been done.
    Regards,
    Atul

  • InfoSet Query: Syntax Error while generating the program.

    Dear All,
    I have a Query in CRM system which contains an Infoset based on LDB.
    The InfoSet Query throws up a Syntax error while generating the program.
    So, we are not able to change the Infoset using the Infoset Query through SQ01.
    The error is as follows:-
    Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
    Error in the ABAP Application Program
    The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
    in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
    line 28:
    ""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
    "ernal tables, strings, references, or structures as components. -"
    Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
    Awaiting your reply as soon as possible.
    Thanks and Regards,
    Pankaj.

    There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
    I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there.

  • Getting error in Portal "Error while generating the PDF" for BI Report

    Hi Experts,
    we are gettign the error while trying to generate the PDF file from the Reports.
    Earlier it was working fine Adobe Reader 8 , currently we have upgrated Adobe Reader 9 in our system.
    After this upggradation browser "*Failed to open PDF in Browser"*
    Could you please suggest me how to diagnostic the error. Do we need to configre something in the Portal or in the Backend BI system for this.
    Please suggest me the needful on this?
    thanks
    Narpal

    Hello,
    i am facing the same problem and found help by 925741:
    "Error while generating PDF"
    There is no more information available when clicking on the error.
    Used Software:
    Adobe 8
    SAP_ABA             700       0018      SAPKA70018     Cross-Application Component
    SAP_BASIS           700       0018      SAPKB70018     SAP Basis Component
    SAP_BW     700       0020     SAPKW70020     SAP NetWeaver BI 7.0
    PI_BASIS       2005_1_70 0018      SAPKIPYJ7I       PI_BASIS 2005_1_700   
    BI_CONT     703     0013     SAPKIBIIQ3     Business Intelligence Content
    Any other ideas?
    Thanks,
    Rainer
    Edited by: Rainer SIGG on Mar 9, 2009 4:41 PM
    Edited by: Rainer SIGG on Mar 9, 2009 5:27 PM
    Edited by: Rainer SIGG on Mar 9, 2009 5:42 PM

  • WebInterface Server - Error while opening the PDF file

    Hello,
    We are using webinterface to display the MSDS genearated.
    Our customers use the link provided to them for displaying the msds.
    We imported a few MSDS ( CG36 ), which are in PDF format & displayed successfully on the webinterface server.
    However the newly generated MSDS ( Create Report ) from SAP EH&S system are not getting displayed on the webinterface server. We are getting following error message:
    Error reading resulitng document from filesystem. Class:
    COM.td.ehswww.results.EhsDocument.
    Method:getResolvedDocument().This error could have been caused by a misconfigured filter.ini.
    We checked and found that the filter.ini file is same on both quality & production system.
    We are able to generate & display the report successfully on quality webinterface server.
    Problem only appears on the production webinterface server.
    We also tried to search for the SAP notes on this issue.
    But we could not find out any relevant note for our issue.
    Any help in this regarding is highly appreciated.
    Thanks & Regards,
    Aarohi

    Hello Sebastian,
    Thank you very much for your help.
    We checked on both quality & production webinterface server.
    The Tomcat service is not executed with any specific user.
    The system is working fine on quality , we are getting errors only on the production.
    We also identified a strange behavior on the production web interface server.
    We are able to see files under following menu path:
    There are error files getting generated.
    I guess these error files are getting generated while converting the rtf file to pdf file.
    The resultant PDF file is not getting generated and hence system is giving the error on the webpage.
    Can you guide us as to why these error files are getting generated .? What can be the root cause of this issue.? and How to prevent this.?
    Again thanks a lot for your help.
    Best Regards,
    Aarohi

  • Bursting Program in error 'error while generating the document'

    Hi All,
    We have a requirement to place EXCEL output generated through BI XML report, in EBS path. ex: /usr/tmp
    Parent Concurrent program is generating output file and program got completed normal and Bursting program got submitted.
    But, Bursting program completing in error, saying 'Error While Generating Document'
    Other programs which use Bursting are working normal and they are using same path (/usr/tmp)
    Anyone faced similar issue ? Any sample bursting control file that sends .xls file will also be helpful.
    Below is the bursting file that we created:
    <xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
      <xapi:request select="/XXPREDICT/G_DATA_GROUP">
        <xapi:delivery/>
        <xapi:document output="/usr/tmp/XXYYZZ_${RUN_DATE}_${RUN_TIME}.xls" output-type="excel">
          <xapi:template type="xsl-fo" location="xdo://<APPLSHORTNAME>.<TEMPLATECODE>.en.US/?getSource=true" />
        </xapi:document>
      </xapi:request>
    </xapi:requestset>
    P.S: When we give template type as 'rtf', then we are getting a different error i.e., "No such file or directory"
    Regards,
    Rupa

    You should use:
    <xapi:template type="rtf" location="CUSTOME_TOP_PATH/US/REPORT_RTF_NAME.rtf"/>
    You need to check that there should rtf file present with the same name as you mentioned in above code. Also verify the port number.
    Example:
    <?xml version="1.0" encoding="US-ASCII"?>
    <xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
    <xapi:request select="/DEBIT_MEMO/LIST_G_1/G_1">
    <xapi:delivery>
    <xapi:email id="123" server="localhost" port="1028" from="[email protected]" reply-to="[email protected]">
    <xapi:message id="123" to="[email protected] ${EMAIL}" attachment="true" subject="Invoices for VENDOR_NO:${SEGMENT1} and Period ${CF_4}">
    Please ignore this report.It is for Testing,For INVOICES of vendor ${VENDOR_NAME} for the Period ${CF_4}</xapi:message>
    </xapi:email>
    </xapi:delivery>
    <xapi:document output="${SEGMENT1}||TSRL HM||${CF_4}" output-type="pdf" delivery="123">
    <xapi:template type="rtf" location="/ebiz/app01/appldev/DEV/apps/apps_st/appl/xxabrl/12.0.0/reports/US/XXTSRL_DEBIT_CREDIT_MEMO_PRINT_LATEST_TSRL_HM.rtf">
    </xapi:template>
    </xapi:document>
    </xapi:request>
    </xapi:requestset>
    HOP! it will help you.

Maybe you are looking for

  • Can I set up a hyperlink to the next page of a series?

    Hello, Here's a question for the braintrust here...... I was trying to build a gallery of images that I can change over and over. I wanted to know if it was possible to set up a generic hyperlink in a template file that, when clicked, simply goes to

  • Kindle Fire install?

    Kindle Fire install?

  • Faire disparaître barre outils safari sur iphone avec site Adobe Muse?

    Comment faire disparaître la barre d'outil en bas de page safari sur l'iphone avec mon site adobe muse?

  • IPv4 vs. IPv6 question

    I have a machine that I believe is running only IPv6 and here is why, when I try to compile and run this example I found on the internet: import java.net.*; import java.io.*; public class ip public static void main ( String[] args ) throws IOExceptio

  • Integrate TLN with the Portal Masthead

    Hello Experts, I am trying to integrate the top level navigation with the portal masthead. Please let me know if you know of any poosible soulution for the same. I have a custom jsp file "X.jsp" which I have used to modify the TLN as per my requireme