Switch mode from edit to view

I am using JSR-168 portlet and JSF, I would like to have a button in the Edit mode , whenever user click it will switch to the view mode.... How to do this?
Thanks for the help!

This issue got hold on until now I tried to do it .......
Well, it is OK after add cancel and navigated back to the view mode from edit mode no problem, but the new problem now is after in view mode the pencil icon on right top corner of the portlet is not available any more , just an navigation arrow icon there which is the same icon when you just switched to Edit page mode... SO when click this arrow, the page reload and the small edit pencil icon is showing , but is not working anymore after click it.. Which means always stay in View mode now and can not navigate to Edit mode anymore...
Thanks for your help!

Similar Messages

  • Acrobat XI switch between form design & form view

    I just started creating programmable forms in XI (I know how to do it in 8, but we upgraded!).
    I've got the form done, but in order to work with form fields and such, the only way I can find to get back to editing it is to do the following.
    With the form open in Acrobat, click:
    Create
    Create Form
    From Existing Document
    Current Document
    click Continue
    To go from editing to viewing the form, it's just a matter of clicking on Close Form Editing.
    Is there an easier way to switch back and forth, from viewing into editing???
    Thanks!

    This is a good time to mention some other keyboard accelerators that were added to Acrobat 11 but aren't documented anywhere that I know of (apart from the A key). I think the lack of documentation is unintentional, or else I'm just not seeing it in the usual places. These are available in form editing mode.
    P
    Toggle between editing & previewing (testing) your form
    L
    Align selected fields left
    B
    Align selected fields bottom
    R
    Align selected fields right
    T
    Align selected fields top
    H
    Align selected fields horizontal
    V
    Align selected fields vertical
    Shift+V
    Center fields vertical
    Shift+H
    Center felds horizontal
    Shift+L
    Highlight fields
    Shift+N
    Show Tab Order
    Shift+D
    Document JavaScripts
    G
    Toggle guides On/Off (yay!)
    A
    Toggle Forms Edit mode (finally!)
    Shift+Edit>Paste
    Paste fields in place (awkward, but nice!)
    F
    Field tool (current)
    Shift+F
    Cycle through field tools (text, check box, radio button, list, dropdown, signature, bar code) Note that button isn't included.

  • How to switch editing mode from PAL to NTSC on existing project?

    Hi,
    I'm editing some NTSC footage and half way through it I realized that I am editining in PAL mode. How can I switch my project editing mode to NTSC without loosing all my editing work? When I go to menu Project-Project Settings-General, the Editing Mode drop down for PAL, NTSC is grayed out.
    Thank you,
    Pavel.

    Brilliant.
    I have managed to scratch together the following Nikkors.
    All optics are clean and sharp.(I had some serviced) I am enjoying collecting as well as using them. Looking for an F2 85mm (manual focus now to complete the acquisition process)
    Nikkor 24mm AF f/2.8D 603947 2006
    Nikkor 28mm MF f/2.8 479495 1981
    Nikkor 35mm MF f/2.8 776970 1974-78
    Nikkor 50mm MF f/1.4 362602 1962>
    Nikkor 50mm MF f/2 3718402 1979
    Nikkor-P micro 55mm MF f/3.5 687849 1971-73
    Nikkor 105mm MF f/2.5 1009507 1981>
    Nikkor QC 135mm MF f/2/8 391789 1973>75
    Zooms:
    Nikkor 28- 85mm AF f/3.5 n.a 1986-90
    Nikkor 35 70mm MF f/3.3-4.5 2060284 1984>
    Nikkor 70- 210mm AF f/4-5.6 n.a 1987

  • Sharepoint 2010: prevent users from editing a list in the datasheet view

    Hi,
    I have a sharepoint 2010 list that I need to prevent users to edit from the datasheet view. This is because I have edited the add item form on sharepoint designer and included some custom code. Moreover, I need to allow the users to view the list in datasheet
    view to make use of the datasheet custom filter view feature which is not available in the standard view. So I need users to access the datasheet view of the list in read mode only but be able to edit the list in standard view only. Is this possible? How?
    Thanks,
    George

    Hi.
    Maybe this helps...I found some users having the problem that the list WAS read only in datasheet view...this is a list of reasons why this could happen:
    Certain columns, such as Created By and Modified, are always read-only. Values for these columns are entered automatically.
    The changes you made to the selected row or column have been submitted to the server. If there is no conflict or error, you will be able to edit the row or column after the changes have been saved.
    There is an unresolved conflict or error in the selected row or column. Resolve the conflict or error before attempting to edit the selected row or column.
    The list is set up to require content approval, and you are viewing the list in the All Items view.
    In the My Submissions view of a list that requires content approval, the
    Approval Status and Comment column are read-only. Only a user with Manage Lists right can edit these two columns.
    Attachments are read-only in a list that requires content approval. You cannot view or edit attachments in any of the views.
    The document in the current row has been checked out by a user. You cannot edit the columns in the row until the user checks the document in.
    You do not have permission to edit the column or row. Contact the list author for more information.
    (from the help)
    You could also check:
    http://support.microsoft.com/kb/2274841
    Reverse engineer and you may have a solution? ;-)
    Regards
    hr class="sig">Thomas Balkeståhl - Technical Specialist - SharePoint

  • Unable to switch  screen mode from standard: PS CS5

    Full screen with or without menus is grayed out in the view menu and the view dropdown selector from the menu bar. I have quit and re-entered PS and have reset all workspaces to default. I have checked that I'm working in 64 bit. I still cannot switch screen mode from standard. Last update was to 12.04. Last extension installed was photokit sharpener.
    Thanks for any help. (PS, how do I reset preferences file on a mac?)
    Cathy
    Pertinent info:
    Adobe Photoshop Version: 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch]) x64
    Operating System: Mac OS 10.6.7
    System architecture: Intel CPU Family:6, Model:37, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 3200 MHz
    Built-in memory: 4096 MB
    Free memory: 2353 MB
    Memory available to Photoshop: 3698 MB
    Memory used by Photoshop: 69 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Normal
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: False.
    OpenGL Crash File: Not Detected.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Version: 2.1 ATI-1.6.26
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: ATI Radeon HD 5670 OpenGL Engine
    Display: 1
    Main Display
    Display Depth:= 32
    Display Bounds:=  top: 0, left: 0, bottom: 1080, right: 1920
    Video Renderer ID: 16915203
    Video Card Memory: 501 MB

    Ahh, I knew it was probably something simple. No I didn't have a doc open since I was just working with prefs and trying to set desktop color. Banging my head now on my desk. Bam! So dumb ...
    Thanks so much for solving my problem.

  • Report tabs disappear from Edit mode

    Hi,
    I am experiencing a seriously puzzling issue in BO XI R2 (Web Intelligence). A user claims that she lost half of the tabs in her report after it was migrated from staging to prod with Import Wizard.
    Indeed when I click on Modify, in the Edit Report view several report tabs are missing. It's not just a case of scrolling to the right unfortunately...
    I first thought that the user deleted the report tabs accidentally but when running the report, the missing tabs show up.
    There is no such thing as a hide functionality from what I hear I checked in the report map but the missing tabs are not visible there.
    Any idea?
    The BO version is 11.5.9.1076 which is SP3.
    A hotfix released with CHF20 (ADAPT00722944) is said to have resolved a similar issue where the last report tab of a multi tab web-I report would disappear when editing it This should be covered by SP3 though so I should be getting this issue.

    Oh Boy. I am now experiencing this behaviour in Webi. The webi is still in Dev. When I ran on info-view with 'view' mode, it has displayed all tabs in the report, but when I pressed 'Edit' button and did some variable changes, I lost all tabs, but for the first one. I hit the Save button without noticing this behaviour.
    I fortunately had a copy of this webi. I see the same behaviour there. View mode shows all tabs, but as soon as I press Edit mode, I lose all tabs except the first one. For now, I am not saving it and coming out. But I need to make changes to this webi.
    Strange!!
    Anyone else is facing this issue or any SAP solution. We are on BOBJ XI R 3.1 SP3 (We don't have FP3.2 yet)

  • How to prevent editing a SharePoint site column value from document properties view of a downloaded document?

    Hi,
    We have created a SharePoint site column with below settings
    1. ShowInEditForm - False
    2. ShowInNewForm - False
    3. ShowInDisplayForm - True
    With the above definition, the site column showing only in view properties form not in New and Edit forms.  This column is added to a document library and updating this column value will be managed by event receiver code when a document is uploaded.
    Till this point, everything is working OK.
    But the issue is when we download and open a document from the above document library, under document properties the above column (with value) is visible along with other document default properties and  this column value is editable. With this issue,
    user is able to set a new value and overwrite the existing value by re-uploading the document.
    Could you please let me know how to handle this issue so that user should not be allowed to edit except viewing the value/property (read only)?
    Thanks in advance.
    Regards
    Ramesh

    You can set "ShowInFileDlg" property of field to "FALSE". Using this you will not see that field in document properties list

  • Picture disappears while editing from main screen view in iPhoto.

    Does anybody have any idea why this happens?  Certain pictures will disappear from the main view and I can't edit them at all since I can't see it.  I can see them in the thumbnail and once I exit the edit screen I see it again.  If I revert it shows again too. 
    This doesn't happen with all pictures only a few and I don't know why.  Any help would be appreciated.

    Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    iPhoto 8 (09) and earlier- run the options indicated
    iPhoto 9 (11) and later- run  Option #4 to rebuild the database
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager (iPhoto 8 or earlier or IPhoto 11 and later) and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the
    File ➙ Rebuild Library (iPhoto 8 or earlier)
    or
    Library ➙ Rebuild Library (iPhoto 9 or later)
    menu option to rebuild the library.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Is it possible to use software limits on 7354 board when switching control modes from open to closed or closed to open loop?

    Is it possible to use software limits on 7354 board when switching control modes from open to closed or closed to open loop?

    Hello Richard,
    When you say 'open loop' and 'closed loop', are you referring to running the application in position and torque mode? If not, how exactly are your controlling a servo motor in open loop? 
    In closed loop mode, the encoder values will be used as reference and the motion VIs can be used to configure the software limit as required. Are you currently losing the software limits? If so, how exactly are you losing these values? I am not sure I understood what exactly is happening with software limits in your program, so any more information on this would be useful. 
    Vivek Nath
    National Instruments
    Applications Engineer
    Machine Vision

  • Itunes 11.1.5 does not recognize the switch to 64 bit mode from 32... won't open

    itunes 11.1.5 does not recognize the switch to 64 bit mode from 32... won't open

    Is there some background story to this that might give us some clue?  An error message quoted exactly? Did you just do an update?
    Try starting iTunes with the shift key held down.  If it starts it is probably some old plugin presenting problems.

  • Animations reset if you switch away from Presenter view?

    This may be fairly unique to us, but in the middle of a Keynote presentation while in presenter view, I will have to switch away from Keynote to another application and then I would like to switch back.
    The problem is if there are 5 animations on a slide and I am on the third, when I switch back to Keynote for whatever reason Keynote is back at the first animation as if I just pulled the slide up for the first time.
    I've poked around to see if there is an option or anything to turn this "feature" off and haven't found anything. I don't know why anyone would want that behavior either.
    Anyone have any ideas? For now, I am just chopping up the slides wherever we have those kinds of transition points but it's a real pain. All I want is for Keynote to "Freeze" and chill in the background while I temporarily switch to another program that I need to show, and be right where I left it when I switch back.

    Erik,
    I think "am just chopping up the slides wherever we have those kinds of transition points" might be the best possible solution....where at the space you need to switch programs one slide ends and the transition to the next slide requires a manual click ... you use Alt+Tab to switch to the other program, run it, then when finished Alt+Tab back to KN and manually click. (Using Duplicate Slide might be helpful....deleting what you want after the other program from the first and deleting what you wanted before the other program from the second slide....with the manual transition appearing between the slides.)
    I will be interested if somebody has an alternative answer.

  • How do i switch from top sites view to normal view

    how do i switch from top sites view to normal view

    Visit the site you want it to be the Homepage.
    Safari > Preferences > General
    Homepage:
    Click the "Set to Current Page" button.
    New windows open with:
    Click the popup menu box and select "Homepage"
    New tabs open with:
    Click the popup menu box and select "Homepage"
    http://support.apple.com/kb/PH11857

  • ALV Grid fields from editable to non-editable mode

    Hi,
    I am displaying my data through ALV Grid. In my grid the non-key fields are in editable mode.
    When I edit any of the editable fields and place the cursor on other field the field which I have edited should become disable(non-editable). Again if I want to edit the same field which is now in non-editable mode should again change to editable mode when the cursor is placed on it.
    Thanks & Regards,
    Adithya M.

    Hi Adithya,
    I am confused by your statement "place the cursor on other field the field which I have edited should become disable" -- are you stating that this is the requirement or what is currently happening with your program.  The way the edit fields should work by default is they are editable at all times unless you tell it otherwise. 
    If you are saying your requirement is to change the field to disabled once the field is edited (runtime change), first you want to handle the event on data changed then within your method of handling on data changed, you can disable the field from being edited by using cell styles and changing the value to disabled. 
    If you look at program BCALV_GRID_EDIT,
    You will find code where it disables the field for edit using Cell Style -- this will give you an idea how Cell Style controls editable fields and display fields:
            ls_cell-style  = cl_gui_alv_grid=>mc_style_enabled.
            ls_cell-maxlen = 4.
            ls_cell-fieldname = 'CARRNAME'.
            append ls_cell to gt_sflight-cell.
    This specific code will set the field disabled when the program is first exectued, in your case if you need to do this at run time, after someone edits the field, you need to implement handling the event on data changed, in the same program you will find:
    method handle_data_changed.                 
       perform data_changed using er_data_changed.
    endmethod.                     
    It is within this method that you can disable a field for editing.
    However, once it is disabled you will not get back into the handle_data_changed method.  I'm not sure I understand your statement "Again if I want to edit the same field which is now in non-editable mode should again change to editable mode when the cursor is placed on it."  Why would you want the user to be able to edit something, then show it disabled, then let them click on it and edit it again?  Why not just leave it in edit mode?  Maybe if I understand the requirement better, I can answer this portion of the question. 
    If this is based on security or changing from edit to display for the entire grid, you can run the same program mentioned above and click on the Change/Display button in the top left to see how it enables and disables the entire grid for editing.
    Cheers,
    Bonnie

  • How to switch FM transmitter's mode from US to Europe?!

    I live ir Europe and I bought Griffin FM transmitter for iPod Nano, but I don't know how to switch it's mode from US to Europe! Could someone please tell me because I can't find that information in user's manual!
    iPod Nano 2GB   Windows XP Pro  

    Hi,
    I don't know where in Europe you are, but keep in mind that in some places (UK for example) the fm transmitters are currently illegal!
    Sorry I don't know how to answer your question. I previously used an an iTrip with my old 3G iPod in europe and it worked fine.
    Good Luck
    Macbook 1.83GHz 1GB   Mac OS X (10.4.6)   iPod Nano, iPod 3G 20GB

  • HELP!:TB switching to/from car/desktop mode on its own and won't connect to computer

    When I charge my Thunderbolt, it will randomly switch to/from desktop mode on its own. Also, it won't recognize the VZW car mount any longer. I have the app to turn on the car mode, but occasionally it will turn off, on its own, as well.
    In addition to all this, my computer can't find my TB, no matter what setting I use to "Connect to PC"!
    Can anyone help?

    Thank you lemew for your reply.
    Hello snowbdr88
    The problems your describing with your device, sound very irritating. Let's get this fixed as soon as possible.
    Did this issue start after you downloaded an application? If so please delete the application and retest.
    Please power the device in safe mode and retest. Here's the link for safe mode: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=40136
    Here are the instructions for USB connection:
    USB Mass Storage Mode: Allows user to transfer files between PC and device's MicroSD Card.
    The device must contain a memory card and be connected to a PC via a USB cable for this feature to work.
    From the home screen, touch and hold the window shade (located at the top of the screen). 
    Drag the window shade to the bottom of the screen
    Enable USB Mass Storage
    From the window shade, touch option below Ongoing Notification options, the below window will display once user
    has connected device to PC. 
    Please let me know if you are still experiencing these issues.
    Thank you
    JoeL_VZW
    Please follow us on twitter @vzwsupport

Maybe you are looking for