Switch to Another Call on 3.1.2

Hi Guys,
After upgrading to OS 3.1.2 on my iPhone 3Gs, i started to have problems when i try to "End Call and Answer" when i am on the phone.
When i am speaking with someone on the phone and receive another call, i push "End Call and answer" to switch to the new call. But the text in that button disappears and it shows that i am on the new call but cannot speak or hear anything. So i have to end that call and call back.
When i restart the phone it becomes ok. But after 1-2 days it happens again.
Has anyone experienced such problem? Any solutions?
Best regards,
Serdar

Yes, I have experienced this on my 3Gs as well. I just wrote it off when it happened as an isolated incident but I guess this should be added to the bug list.

Similar Messages

  • Can I switch a Factime call from one device to another?

    I would like to know if there is a way to pick up a Facetime call on one device and then switch it mid-call to another device, in the same way one is able to put down one extension and pick up another in mid-call to transfer it to another handset on a landline?
    Thanks!

    Do you mean Re- download...?
    If so, see here... Download Past Purchases  >  http://support.apple.com/kb/HT2519

  • JTabbedPane, how can a tab switch to another tab?

    I have a JTabbedPane with a few tabs. Each tab consists of a class extending JPanel. If a certain action is performed on on of the tabs, the view should switch to another tab. How can this be done? I know about the method setSelectedComponent in the JTabbedPane class. But since the tab doesn't know about this, how can I use it?

    Actually, the solution was dead simple. All I had to do was give the constructor of the class/tab a reference to the JTabbedPanel instance so it can call setSelectedIndex on it.
    It works now, thanks anyway.

  • Can I switch to another Coherence Grid in Java Extend?

    The scenario is I have two data grids, the name of the cache are same, but data in the cache is different. I programmed a Java Client (Extend) to the data grid, the Java client is using a configuration file configured to connect with one of the data grids, the connection is configured in remote-cache-scheme section. Every time When I want to connect my Java Client to another data grid, I have to stop the JVM of the client and modify the configuration file.
    My question is can I switch to another data grid from my Java client without shutting down the Java Client's JVM and modify the configuration file? I noticed that in the caching-scheme-mapping section of client configuration, we can use the name to decide which grid to call, but in my case, the caches in both data grids has same name.

    I use this sample code to connect to two or more proxy extend with the same cache name.
    import com.tangosol.net.CacheFactory;
    import com.tangosol.net.CacheFactoryBuilder;
    import com.tangosol.net.ConfigurableCacheFactory;
    import com.tangosol.net.NamedCache;
    public class TestMultipleProxyAccess {
    public static void main(String[] args) {
    ClassLoader cl = TestMultipleProxyAccess.class.getClassLoader();
    String cacheConfigA = "client-cache-config-a.xml";
    String cacheConfigB = "client-cache-config-b.xml";
    CacheFactoryBuilder builder = CacheFactory.getCacheFactoryBuilder();
    ConfigurableCacheFactory ccfA = builder.getConfigurableCacheFactory(cacheConfigA, cl);
    NamedCache ncA = ccfA.ensureCache("myCache", cl);
    ConfigurableCacheFactory ccfB = builder.getConfigurableCacheFactory(cacheConfigB, cl);
    NamedCache ncB = ccfB.ensureCache("myCache", cl);
    }

  • How do I hear Garageband in multitask? I am playing guitar in GB using Apogee Jam. Would like to read lyrics in Safari while hearing guitar in background. But I can only hear GB when it is the active program. Sound stops if I switch to another app.

    How do I hear Garageband in multitask? I am playing guitar in GB using Apogee Jam. Would like to read lyrics in Safari while hearing guitar in background. But I can only hear GB when it is the active program. Sound stops if I switch to another app.

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • Autorecognition causes screen to switch to another Space (bug)

    I have a problem with the auto-recognition function. The function itself work fine, but it is displayed in another Space.
    So when I work in Space 2 with Numbers, whenever the auto-recgnition (as a drop down box) is to appear... the screen switches to, say, Space 1. Then when I react to the auto-recognition function, the screen is automatically switched back to Space 2.
    Does anyone know what's happening?
    Thanks,
    Kira
    Message was edited by: KiraAmsterdam

    I believe the feature meant is called "auto-completion." Auto-correction fixes capitalization, changes regular quotes to "smart" ones, & so on. Auto-completion offers to complete an entry, based on entries already existing in the table.
    Auto-completion can be turned off in the "General" section of preferences. Auto-correction has its own tab in the preferences, where various of its options can be turned on & off.
    However, I do not think auto-completion should cause any switch to another Space. (At least, I cannot duplicate this behavior.)
    It might be worth doing some basic checks of the health of the system (like repairing permissions) or possibly creating a new user account to see if the behavior continues in that user account. (If not, it could indicate a bad preference file.)
    Also check carefully the Application assignments & other options in Spaces to see if that offers a clue. For instance, is the switch always to the space assigned to some other application?

  • SPA 512 phones locking up/freezing when another call comes in.

    It doesn't happen every time but several users are reporting phone freezing when another call comes in while they are on the phone.  We have two UC560's under one roof doing this, one using 3com switches and one using Cisco switches, the two (UC560) networks are completely segregated.  We have swapped out some phones thinking it might be a bad phone or two but the problem is still ongoing.  Phones are on the most current firmware that pulls automatically when they are first plugged in.

    Hello James,
    You have to upload the firmware via the drag and drop method in CCA. In the Topology View, use the mouse to drag the phone load (.zip or .bin) file from your PC and drop it onto the UC500 icon. For Cisco SPA500 Series and 300 Series phones, you must extract the .bin file from the archive before dragging and dropping it onto the UC. Make sure you can ping 10.1.10.2 which is the TFTP interface of the UC.
    Thanks,
    -john

  • Telling quicktime to stop playing if switched to another tab or browser?

    Hey Everyone
    Ok say i have a movie on a web page which is playing, and the user switches to another tab or browser window, is there anyway to tell quicktime to stop playing if this happens?
    Thanks for any help

    No.
    Unless the browser has that feature.

  • If I open a PDF doc in a new tab and then try and close the tab with ctrl-w it will try and close all tabs unless I switch to another tab and back again.

    Running Firefox beta and Adobe Acrobat 10. If I open a PDF document in a new tab, say http://support.avaya.com/css/P8/documents/100146419, and then try and close the tab using ctrl-w, I get the message warning me about closing all tabs. If I switch to another tab and then back to the PDF document and then hit ctrl-w, it will just close that one tab and not all tabs.
    Cheers.

    I've just been playing around and I set dom.ipc.plugins.enabled to true and now it closes the PDF document but not the tab. I have to do ctrl-w again to close the tab. However, leaving that set to true ruins the scroll mouse functionality as Acroread seems to want it all to itself.

  • I've been using my mom's iTunes account for years but now I want to switch to another account. How can I do this without losing all of my pictures, music, and apps?

    I've been using my mom's iTunes account for years but now I want to switch to another account. How can I do this without losing all of my pictures, music, and apps?

    Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).

  • NFirefox will not allow me to click on a link without switching to another program first. The version is 3.6.8. This problem makes Firefox virtually unusable. Help!

    Firefox will not allow me to click on more than one link in a sequence. After one click, I am forced to switch to another active application before returning to Firefox and clicking on another link. I have seen this problem posted by others, but I can't find an answer by Mozilla. Since this problem makes Firefox virtually unusable (version 3.6.8) I would hope that Mozilla would offer an answer ASAP. Until then, I'm stuck with Explorer.
    == This happened ==
    Every time Firefox opened

    Do you have that problem when running in the Firefox SafeMode?
    [http://support.mozilla.com/en-US/kb/Safe+Mode]
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this:
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • After installing 6.0.1 on my iPhone 4 I no longer get notification when another call comes in when I'm on another call. In phone settings I no longer have the icons for call waiting and call forwarding. My carrier is sprint

    I no longer get notifications that another call is coming in when I'm on the phone. In the settings under phone I do not see any availabilty for call waiting or call forwarding. I had this feature before installing the new update 6.0.1.

    Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer.  As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
    You can try and find 3rd party applications that might help you.  I'm sure you'll pay, however.
    Let this be a very important lesson learned.
    Best.

  • Whenever I have a pdf document open, and then switch to another tab to view another webpage, the scrolling function on the touchpad will not work. This seems to be a glitch with Mozilla, according to Dell. How do I fix this?

    When I open a pdf document (like an E-version of a newspaper) in Mozilla and then switch to another tab to view another webpage, I am unable to use the scrolling function on the touchpad. I have to use the up and down arrows to get other pages to scroll. When I close that pdf document, everything works fine. I talked with customer support with Dell, and he said it was probably a glitch with Mozilla. So I tried to do the same thing on IE, and there was no problem scrolling with the touchpad while a pdf document was open on another tab. I would like to get a fix for this so I don't have to keep closing open pdf documents in order to scroll with the touchpad while on other tabs. Thank you

    Hi elliezzz,
    If you are having issues with your iPhone not being recognized by iTunes, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Regards,
    - Brenden

  • My iphone froze last nite and i was unable to exit the app i was on, it then switched the screen off as if it was not in use, now i am unable to open my iphone or switch it off, calls are still comin thro as phone is vibrating but im unable to answer

    my iphone froze last nite and i was unable to exit the app i was on, it then switched the screen off as if it was not in use, now i am unable to open my iphone or switch it off, calls are still comin thro as phone is vibrating but im unable to answer as cant activate the screen?????
    pls help

    See Here for  >  Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    More Info here...
    https://discussions.apple.com/message/19521062

  • How To Force User to Fulfill validations in view before switch to another view in infopath 2012

    i have a form with different views
    ,, every view has some validations ,, how to validate each view's validations before switching to another view
    if manual how to do that ?

    Hi Ahmed,
    You can use custom validation for verifying all the fields with required data, and write rule in you submit button to disable till all the fields are entered with valid data. Enabling submit or switch view rule after validation will help you on this regards.
    You can also use internal flags for enabling disabling submit button if required, or just make all the fields required OOTB.,
    I usuall use expressions to validate the form for values, this will help to check multiple fields atonce.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/39160c15-2074-4f27-b9bc-5b0a20d2d29e/validate-30-fields-on-infopath-form-before-swiching-view-or-submit-form-data
    here are some links for reference,
    http://office.microsoft.com/en-us/infopath-help/introduction-to-rules-HA010381865.aspx
    http://office.microsoft.com/en-us/infopath-help/add-rules-for-validation-HA101783369.aspx
    http://sharepoint-mattharmon.blogspot.com/2013/03/conditional-validation-rules-infopath.html
    http://www.bizsupportonline.net/infopath2007/infopath-basics-3-ways-validate-data-infopath.htm
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

Maybe you are looking for