Switching an upgrade to a different line

I have a family plan with 5 lines
One is eligible for an upgrade, and I want to switch it to another line to get an upgrade
So, Line A is eligible for an upgrade, I want to put it on Line B
Line A was activated 2 years ago in August, so next month, my 2 year contract will be up with that line
Can I close that line? I know when you do an upgrade you resign a contract, but does the contract signing now apply to Line B since that is the one I used it on?
Or do I have to keep Line A open for another 2 years and just not use it?
Thank you for your help.... (if any of the above makes sense to anyone)

When you "transfer" an upgrade (I use that term loosely, I'll explain this later) you are signing a new contract on the line that is eligible, not the line that is using the phone. The reason I quoted transfer, is because you can't actually transfer an upgrade. All you do is purchase the phone on the eligible line, and use it on a different line. You don't even have to be on the same account to do this.
Also, when you're eligible to upgrade is not when your contract is up. You are eligible to upgrade at 20 months into your 2 year contract. You can cancel the line after completing the full 24 months. Otherwise you will have to pay an ETF.
So basically, purchase the phone you want on line A (the eligible line) and this will extend line A's contract another 2 years. When you get the phone, activate it on line A first (this is to accept the terms of service you sign) and then you can activate the phone on line B (the one that is not yet eligible) and line B's contract will be the same as it was before. When line B becomes eligible for an upgrade, you can use that for line A if needed.
If you want to use line A's upgrade for line B, and then cancel line A, you will pay the ETF. $350 for smartphones, or $175 I believe for feature phones.

Similar Messages

Switching iPhone 5 to a different line?

Hello All!
I have a quick question before the phone comes (hopefully in the next few days!)
My sister's line was eligible for an upgrade, so I used her upgrade to get the iPhone 5. She wants my 4S, so I was hoping once the iPhone 5 arrives, to trade our phones around (while keeping our numbers). Do I need to call Verizon to activate the iPhone 5 on a line? Or is this something I can do online?
I just don't want to turn the phone on and have her line get disconnected (as she is in another town at school.) I just want to switch the iPhone 5 for my current phone once it arrives. I'd prefer an online method, but any advice you have is welcomed! Thanks!

I called cust svc for my new 5 today. I wanted to do as you said and activate it on a different line. I was told with the new nanosim (sp?) card this not possible. Apparently when I preordered my 5 it came with the new sim card programmed for the number I upgraded from and if I tried to activate it on the line I wanted to it would say dead sim card.
My two options were to activate it on the line I upgraded and then 24 hours later switch the phones around or go to the store and they would give me a new sim card. I went to the local store and they said they were not shipped these new sim cards and therefore the only option I had was to activate the phone and wait 24 hours. So tomorrow night I will call or go online and switch the phones...

Upgrade on a different line?

I upgraded on my grandmother's line. Will i be able to switch it to my phone number no problem? I called verizon and they said it shouldnt be an issue. Plus I have done it with blackberrys in the past. I was just wondering if anyone had any positive/negative experiences.
thanks

stasiam wrote:
I upgraded on my grandmother's line. Will i be able to switch it to my phone number no problem? I called verizon and they said it shouldnt be an issue. Plus I have done it with blackberrys in the past. I was just wondering if anyone had any positive/negative experiences.
thanks
I just pretty much did this in store yesterday with no trouble at all. None of my lines were eligible right now for an upgrade so I was actually going to pay full retail but had it kind of hinted I could save money by just canceling a line paying the ETF which was only 85 and then getting the iphone for 299 so I did that and she added it directly to the line I wanted it on and took the phone that ws on that particular line ( a non smart phone) and added it to the new line I had just created to get the iphone discounted. So basically instead of paying 787 (tax and all) for the Iphone I paid 85+299 and the tax on the 299 of course the 85 is billed to the account they won't let you pay the ETF right there but still I was very happy to save that much from what I had planned on spending and there was no trouble at all with her activating it on the correct line.
Johnita

Upgrading EDGe line and transferring phone to a different line

Hey guys, I currently have one line on the EDGE program that is eligible for an edge upgrade - however, when I upgraded that line to the edge program back in Feb 2014, I did it for use on a different line on my account (basically used another line's upgrade) Now I'm wanting to use the edge upgrade again for the same 2nd line I previously used it for, and am wondering how to go about doing that. I specifically wanted to do the purchase online, which is what I'm leary about - whether or not I could use the upgrade for a different line if purchased online. I really don't have the time to go to a Verizon retailer, considering all the Verizon stores in my area consistently have wait times of atleast an hour (when I last upgraded in-store, I was there a total of 3 1/2 hours). Hoping someone can walk me through how I would go about this transaction.
Thank you guys!

vereyezuhn,
Thank you so much for reaching out to us! I want to make sure that we get all of your concerns addressed for you. Let's make this as easy as possible. In order to go over the account specifics, I would like to speak with you in a Direct Message. I have sent you a message, please respond back to that message for me. I'm looking forward to working with you.
KevinR_VZW
Follow us on Twitter @VZWSupport

Can I activate the iPhone5 on a different line without a SIM-switch?

I've been searching for the answer to "Do I have to have a SIM-switch?" for awhile now. There are already over a dozen threads and different people keep giving different answers. To complicate things, even Verizon Customer Service is providing what appears to be drastically different answers. To help anyone else who may be wondering about this, I've complied a list of the Verizon Rep answers below:
Here are links to Verizon support saying that you will be able to activate the phone on any line when it arrives without a replacement SIM.
ChaunceyM_VZW wrote:
"Even though the transfer upgrade option isn't available during pre-orders, you will be able to upgrade using the eligible line. Once the phone arrives, you can select the number that it will be used on. You can visitvzw.com to make the change."
ChaunceyM_VZW wrote:
"Once your phones arrive you can go to vzw.com and activate the iPhone 5 on the number of your choice."
ChaunceyM_VZW wrote:
"I can confirm that you're able to use the upgrade from an eligible line and use the phone on the number of your choice when the arrives. Simply complete your purchase as normal. Once the phone is delivered you can go to vzw.com and activate the phone on the number you select."
ChaunceyM_VZW wrote:
"You have the option to upgrade to the iPhone 5 using any eligible line. Once the phone arrives you're can activate the phone on the number of your choice."
ChaunceyM_VZW wrote:
"You can utilize the upgrade from another number and activate the phone on your number!"
Here is the same Verizon support rep saying that you are required to activate the phone on the line you ordered it before you can transfer.
ChaunceyM_VZW wrote:
"You will be required to
order the phone on Line B
receive the phone
activate it on Line B
Reactivate it on Line A
Reactivate Line B's original phone on Line B.
to transfer the upgrade to another number. I know it's a pain, but your new phone will be worth the trouble."
Here is a different Verizon support rep saying that if you used MyVerizon to transferred an upgrade no additional steps are necessary and the phone will activate for the line that the upgrade was switched to. However, she says that if you didn't utilize the 'transfer upgrade' function, then contrary to Chauncey's answer that you can activate on any line via vzw.com, Vanessa reports that you must obtain a new SIM card in order to upgrade a different line.
VanessaS_VSWSupport wrote:
"The SIM card does come programmed for the phone number it was ordered on. However, if you process order as an Alternate Upgrade, meaning, you requested to have it transferred to your line, the SIM will be programmed to your phone number. If it's not, you will be able to get a new SIM card from VZW or the Apple Store."
VanessaS_VSWSupport wrote:
"Simply select [a] number to upgrade, then select "Transfer Discount", and then select your mobile number, and proceed as normal. This way, you will not have to get a new SIM card, as the SIM card will come programmed with the number it was ordered on.
VanessaS_VSWSupport wrote:
"If the new phone was ordered under a different line, the SIM card will come pre-installed with that phone number; therefore, you will need a SIM card for your number if the new phone will be on your line. If you did an Alternate Upgrade, using another eligibility, but ordered it on your line, the SIM card will come pre-installed with your number and you'll be able to activate it on your line, no problem."

Hi Houser,
Sorry about the delay in our response. I know the information regarding the iPhone 5's sim card is confusing so let me go ahead and clear that up for you. The activation process for the sim card depends on how you ordered the phone. If you order the iPhone for line A but wanted it active on line B and you selected the "Transfer Upgrade" option when you processed the order, you will not need to complete any additional steps. Just power on the phone, activate it and you'll be all set. The phone will be programed to the correct line.
If you ordered the iPhone 5 for line A but really want to activate it on line B and did not choose "Transfer Upgrade" you will have to complete the following steps.
1. Activate the phone on line A.
2. Remove the sim card.
4. Complete the ESN change to activate iPhone and sim card on line B by going to www.vzw.com/myverizon or by calling our customer service department at 1-800-922-0204.
6. Re-insert the sim card and activate phone B the next day. (This steps needs to be completed because the sim card is going to be reused)
Thanks for the great question!
NidiaA_VZW
Please follow us on Twitter @vzwsupport

Can I switch my phone number between two lines(not just between phones)?

I have 4 months left on my current plan. I would like to take advantage of current holiday sales to get the droid razr for cheap. I am considering adding an additional line to my plan to get the upgrade. The problem with this is that I either have to use the new number and let my other contract end or continue on with my current number and pay for 2 lines for the next 2 years. I noticed that verizon lets you switch the phone number that is associated with your line. Would I be able to add an additional line to my plan and then switch the numbers between these two lines? Essential line A has number A and ends in 4 months, line B has number B and ends in 20 months, and I want to make it so that line B has number A and then only pay for line A for the next 4 months. Is this possible?

Verizon does not allow you to switch numbers since they are tied to your contact. However, there's a work around, because Verizon does allow you to port a number from another carrier to overwrite the existing number without changing your contract. So here's what you need to do:
1. Get the Razr cheap like you wanted on a secondary line;
2. Wait for 4 months so your main line contract is up;
3. Port out your main line number to another carrier, for example, Pageplus;
4. Wait till your bill cycle is passed and port that number from Pageplus to Verizon, overwrite the number on secondary line.
After step 4 you will have your main number back on the line with the Razr.

HT4528 Is it possible to buy an iphone for yourself at the apple store when you're using an upgrade from a different phone number on your plan?

I broke my old phone a few days ago, and my phone number doesn't have an upgrade until the summer of next year. My dad offered me his upgrade, since he doesn't need a new phone and it would save me a few hundred dollars. Is it possible for me to go into the Apple store and purchase a new iPhone when I'm using an upgrade from a different phone number? I already cleared it over with the people at Verizon, who told me I could switch the upgrade over online.

There are 2 issues here.
Some carriers REQUIRE a data plan in order to use an iPhone on their network. This requirement will vary from carrier to carrier. The iPhone is designed to be constantly connected. If you do not manually go in and turn off cellular data (not just 3G) The phone will attempt to connect to the Internet over the cellular data network. If you have your carrier specifically block these requests, you shouldn't be charged for them. If not, it could end up costing you lots of money you didn't expect. The other thing that will happen is things like visual voicemail will not work (if the carrier supports it to begin with) and you will get lots of messages about not being able to connect to cellular data if you're not in range of WiFi you can connect to. MMS messaging also will not work.
The second issue surrounds the statement: "use the iphone 4 with a standard cdma phone plan".
It is NOT possible to purchase an unlocked CDMA iPhone. ALL CDMA iPhones are locked to Verizon.

Output the requested delivery date for each different line item

Hello Experts
I have program called ZFSFSF(following), in the output Its showing multiple requested delvery dates per line item.
But We need to show the requested delivery date for each different line item.
Any code is highly appreciated. I wud appreacite if you cud bold the added code.
Thanks
SP
TYPE-POOLS: slis.
TABLES: vbap, vbrk, vbfa, vbak, vbrp, konv, kna1, bkpf, bsad, bkpf_bsad,
knvv, pa0002, t005u, mvke, lips, likp, vbpa, vbep.
DATA: BEGIN OF i_list OCCURS 0,
vbeln LIKE vbak-vbeln,
posnr LIKE vbap-posnr,
matnr LIKE vbap-matnr,
erdat LIKE vbap-erdat,
mvgr1 LIKE mvke-mvgr1,
wadat_ist LIKE likp-wadat_ist,
days TYPE i,
werks LIKE vbap-werks,
lgort LIKE vbap-lgort,
kwmeng LIKE vbap-kwmeng," CH01+
lfimg LIKE lips-lfimg," CH01+
pstyv LIKE vbap-pstyv," CH01+
obd LIKE lips-vbeln," CH01+
obd_pos LIKE lips-posnr," CH01+
soldto LIKE vbaK-kunnr," JR+
shipto LIKE vbpa-kunnr," JR+
edatu like vbep-edatu," PR+
END OF i_list.
DATA: i_list2 LIKE i_list OCCURS 0 WITH HEADER LINE,
i_list3 LIKE i_list OCCURS 0 WITH HEADER LINE.
DATA: i_list4 LIKE vbap OCCURS 0 WITH HEADER LINE.
*ALV Output Header
DATA: gt_list_top_of_page TYPE slis_t_listheader,
prognm LIKE sy-repid,
gc_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
gt_events TYPE slis_t_event,
is_layout TYPE slis_layout_alv,
is_variant LIKE disvariant,
it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
DATA:gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA:gt_outtab LIKE i_list OCCURS 0 WITH HEADER LINE.
DATA: g_repid LIKE sy-repid,
g_count LIKE sy-tabix.
SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME TITLE text-t01.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t10.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t11.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t12.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK block0.
*/ Selection and Input Parameters
SELECTION-SCREEN BEGIN OF BLOCK blocko WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln, "SO
s_auart FOR vbak-auart DEFAULT 'KB' OBLIGATORY,
s_matnr FOR vbap-matnr," obligatory,
s_mvgr1 FOR mvke-mvgr1,
s_erdat FOR vbap-erdat OBLIGATORY,
s_werks FOR vbap-werks,
s_lgort FOR vbap-lgort,
s_edatu FOR vbep-edatu.
PARAMETERS: p_vkorg LIKE vbak-vkorg DEFAULT '5010'.
SELECTION-SCREEN SKIP 2.
+EC1
Addition +EC1
+EC1
PARAMETERS: p_vari LIKE disvariant-variant.
+EC1
End Addition +EC1
+EC1
SELECTION-SCREEN END OF BLOCK blocko.
+EC1
Addition +EC1
+EC1
DATA: g_save(1) TYPE c,
g_default(1) TYPE c,
g_exit(1) TYPE c,
gx_variant LIKE disvariant,
g_variant LIKE disvariant.
+EC1
End Addition +EC1
+EC1
Initialization fieldcatalog
INITIALIZATION.
PERFORM clear_tables.
g_repid = sy-repid.
PERFORM fieldcat_init USING gt_fieldcat[].
+EC1
Addition +EC1
+EC1
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = gx_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
AT SELECTION-SCREEN.
PERFORM auth_check. "+ESC
PERFORM pai_of_selection_screen.
+EC1
End Addition +EC1
+EC1
START-OF-SELECTION.
PERFORM get_data.
PERFORM alv.
END-OF-SELECTION.
FORM get_data *
FORM get_data.
*CH01 - Added kwmeng(order qty) to selection, excluded rejects
*JR -added soldto and shipto code
SELECT avbeln aposnr amatnr aerdat awerks algort
akwmeng apstyv bkunnr cedatu
CH01+
INTO
(i_list-vbeln, i_list-posnr, i_list-matnr, i_list-erdat, i_list-werks,
i_list-lgort,
i_list-kwmeng , i_list-pstyv, i_list-soldto,i_list-edatu)
CH01+
FROM vbap AS a INNER JOIN vbak AS b ON avbeln = bvbeln
INNER JOIN vbep AS c ON avbeln = cvbeln
WHERE b~vkorg = p_vkorg
AND a~werks IN s_werks
AND a~lgort IN s_lgort
AND b~auart IN s_auart
AND a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~abgru = ''" CH01+
AND a~matnr IN s_matnr
AND c~edatu IN s_edatu.
APPEND i_list.
ENDSELECT.
COMMIT WORK AND WAIT.
LOOP AT i_list.
SELECT SINGLE mvgr1 INTO i_list-mvgr1 FROM mvke
WHERE matnr = i_list-matnr.
MODIFY i_list.
CLEAR: i_list.
ENDLOOP.
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-mvgr1 IN s_mvgr1.
CONTINUE.
ELSE.
DELETE i_list.
COMMIT WORK AND WAIT.
ENDIF.
ENDLOOP.
CH01 - commented these lines out and redid logic below
LOOP AT i_list.
select single vbeln into lips-vbeln from lips
where vgbel = i_list-vbeln
and vgpos = i_list-posnr.
select single wadat_ist into i_list-wadat_ist from likp
where vbeln = lips-vbeln.
SELECT b~wadat_ist INTO i_list-wadat_ist
FROM lips AS a INNER JOIN
likp AS b ON avbeln = bvbeln WHERE a~vgbel = i_list-vbeln
AND a~vgpos = i_list-posnr.
MODIFY i_list.
CLEAR: i_list, lips-vbeln.
ENDSELECT.
ENDLOOP.
CH01 - Changed to select multiple delivery lines & del qty
summing the total deliveries per OBD# and date
LOOP AT i_list.
SELECT avbeln sum( alfimg ) b~wadat_ist
INTO (i_list-obd , i_list-lfimg , i_list-wadat_ist)
FROM lips AS a INNER JOIN
likp AS b ON avbeln = bvbeln WHERE a~vgbel = i_list-vbeln
AND a~vgpos = i_list-posnr
AND a~pstyv = i_list-pstyv
group by avbeln bwadat_ist.
i_list2 = i_list.
APPEND i_list2.
ENDSELECT.
IF sy-subrc <> 0.
i_list2 = i_list.
APPEND i_list2.
ENDIF.
ENDLOOP.
i_list[] = i_list2[].
*End CH01
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-wadat_ist IS INITIAL.
CONTINUE.
ELSE.
i_list-days = i_list-wadat_ist - i_list-erdat.
ENDIF.
MODIFY i_list.
CLEAR: i_list.
COMMIT WORK AND WAIT.
ENDLOOP.
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-vbeln IS INITIAL.
DELETE i_list.
ENDIF.
ENDLOOP.
COMMIT WORK AND WAIT.
*JR
LOOP AT i_list.
SELECT SINGLE KUNNR INTO i_list-shipto FROM vbpa
WHERE vbeln = i_list-vbeln
AND parvw = 'WE'.
MODIFY i_list.
ENDLOOP.
*END JR
gt_outtab[] = i_list[].
COMMIT WORK AND WAIT.
ENDFORM.
FORM alv *
FORM alv.
PERFORM e03_eventtab_build USING gt_events[]. "+EC1
PERFORM e04_comment_build USING gt_list_top_of_page[]. "+EC1
prognm = sy-repid. "+EC1
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_user_command = 'USER_COMMAND'
i_callback_program = g_repid
it_fieldcat = gt_fieldcat[]
it_events = gt_events[] "+ESC
it_sort = it_sort[]
+EC1
Addition +EC1
+EC1
is_variant = g_variant
i_save = g_save
+EC1
End Addition +EC1
+EC1
TABLES
t_outtab = gt_outtab.
COMMIT WORK AND WAIT.
ENDFORM.
FORM fieldcat_init *
--> I_FIELDCAT *
FORM fieldcat_init
USING i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
DATA: pos TYPE i VALUE 1.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'VBELN'.
ls_fieldcat-ref_tabname = 'VBAK'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'POSNR'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MVGR1'.
ls_fieldcat-ref_tabname = 'MVKE'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LGORT'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'ERDAT'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WADAT_IST'.
ls_fieldcat-ref_tabname = 'LIKP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'DAYS'.
ls_fieldcat-ref_fieldname = 'DAYS'.
ls_fieldcat-seltext_s = '# Of Days'.
ls_fieldcat-seltext_m = '# Of Days'.
ls_fieldcat-seltext_l = '# Of Days'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*Begin CH01
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'KWMENG'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-outputlen = 7.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LFIMG'.
ls_fieldcat-ref_tabname = 'LIPS'.
ls_fieldcat-outputlen = 7.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'OBD'.
ls_fieldcat-seltext_s = 'OBD'.
ls_fieldcat-seltext_m = 'Outbound Del'.
ls_fieldcat-seltext_l = 'Outbound Delivery'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'OBD_POS'.
ls_fieldcat-seltext_s = 'OBD Ln'.
ls_fieldcat-seltext_m = 'Outbound Del Ln'.
ls_fieldcat-seltext_l = 'Outbound Del Line'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*End CH01
*JR
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SOLDTO'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-seltext_m = 'Sold To'.
ls_fieldcat-seltext_l = 'Sold To'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SHIPTO'.
ls_fieldcat-ref_tabname = 'VBPA'.
ls_fieldcat-seltext_m = 'Ship To'.
ls_fieldcat-seltext_l = 'Ship To'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*END JR
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'EDATU'.
ls_fieldcat-ref_tabname = 'VBEP'.
ls_fieldcat-seltext_m = 'Requested Delivery date'.
ls_fieldcat-seltext_l = 'Requested Delivery date'.
ls_fieldcat-outputlen = 20.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*FOR ALV SORT & SUBTOTAL
CLEAR it_sort.
it_sort-spos = '0'.
it_sort-fieldname = 'VBELN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '1'.
it_sort-fieldname = 'POSNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '2'.
it_sort-fieldname = 'MATNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '3'.
it_sort-fieldname = 'MVGR1'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '4'.
it_sort-fieldname = 'ERDAT'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '5'.
it_sort-fieldname = 'WADAT_IST'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-down = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '6'.
it_sort-fieldname = 'PERNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '7'.
it_sort-fieldname = 'VORNA'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '8'.
it_sort-fieldname = 'NACHN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '9'.
it_sort-fieldname = 'VKGRP'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '10'.
it_sort-fieldname = 'VBELN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '11'.
it_sort-fieldname = 'ERDAT'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '12'.
it_sort-fieldname = 'BEZEI'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
clear it_sort.
it_sort-spos = '1'.
it_sort-fieldname = 'BELNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
append it_sort.
ENDFORM.
+EC1
Addition +EC1
+EC1
*& Form VARIANT_INIT
text
--> p1 text
<-- p2 text
FORM variant_init.
CLEAR g_variant.
g_variant-report = g_repid.
ENDFORM. " VARIANT_INIT
FORM f4_for_variant *
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_variant
i_save = g_save
it_default_fieldcat =
IMPORTING
e_exit = g_exit
es_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = gx_variant-variant.
ENDIF.
ENDIF.
ENDFORM.
*& Form PAI_OF_SELECTION_SCREEN
text
FORM pai_of_selection_screen.
IF NOT p_vari IS INITIAL.
MOVE g_variant TO gx_variant.
MOVE p_vari TO gx_variant-variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant.
g_variant = gx_variant.
ELSE.
PERFORM variant_init.
ENDIF.
ENDFORM. " PAI_OF_SELECTION_SCREEN
+EC1
End Addition +EC1
+EC1
FORM e03_eventtab_build *
--> E03_LT_EVENTS *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE gc_formname_top_of_page TO ls_event-form.
APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
FORM e04_comment_build *
--> E04_LT_TOP_OF_PAGE *
FORM e04_comment_build USING e04_lt_top_of_page TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader.
*Report Title
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = text-007.
APPEND ls_line TO e04_lt_top_of_page.
**Doc Type Desc.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-008.
ls_line-info = p_matnr.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-009.
ls_line-info = p_werks.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-010.
ls_line-info = p_stlan.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-011.
ls_line-info = p_stlal.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-012.
ls_line-info = p_stlal.
append ls_line to e04_lt_top_of_page.
ENDFORM.
FORM top_of_page *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = gt_list_top_of_page.
ENDFORM.
FORM auth_check *
FORM auth_check.
AUTHORITY-CHECK OBJECT 'V_VBAK_VKO'
ID 'VKORG' FIELD p_vkorg.
IF sy-subrc NE 0.
MESSAGE e054 WITH p_vkorg.
ENDIF.
ENDFORM. " auth_check
*& Form USER_COMMAND
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
PERFORM display_so_order USING r_ucomm
rs_selfield.
ENDCASE.
ENDFORM.
*& Form display_sales_order
text
-->P_R_UCOMM text
-->P_RS_SELFIELD text
FORM display_so_order USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE rs_selfield-sel_tab_field.
WHEN '1-VBELN'.
SET PARAMETER ID 'AUN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
WHEN '1-MATNR'.
SET PARAMETER ID 'MAT' FIELD rs_selfield-value.
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
WHEN '1-OBD'.
SET PARAMETER ID 'VL' FIELD rs_selfield-value.
CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
WHEN OTHERS.
MESSAGE i000(z1) WITH 'Please Click on the Valid Selection'.
EXIT.
ENDCASE.
ENDFORM. " display_sales_order
FORM EDit_table *

> TYPE-POOLS: slis.
>
> TABLES: vbap, vbrk, vbfa, vbak, vbrp, konv, kna1,
> bkpf, bsad, bkpf_bsad,
> knvv, pa0002, t005u, mvke, lips, likp, vbpa, vbep.
>
> DATA: BEGIN OF i_list OCCURS 0,
> vbeln LIKE vbak-vbeln,
> posnr LIKE vbap-posnr,
 etenr like vbep-etenr,
> matnr LIKE vbap-matnr,
> erdat LIKE vbap-erdat,
> mvgr1 LIKE mvke-mvgr1,
> wadat_ist LIKE likp-wadat_ist,
> days TYPE i,
> werks LIKE vbap-werks,
> lgort LIKE vbap-lgort,
> kwmeng LIKE vbap-kwmeng," CH01+
> lfimg LIKE lips-lfimg," CH01+
> pstyv LIKE vbap-pstyv," CH01+
> obd LIKE lips-vbeln," CH01+
> obd_pos LIKE lips-posnr," CH01+
> soldto LIKE vbaK-kunnr," JR+
> shipto LIKE vbpa-kunnr," JR+
> edatu like vbep-edatu," PR+
> END OF i_list.
>
> DATA: i_list2 LIKE i_list OCCURS 0 WITH HEADER LINE,
> i_list3 LIKE i_list OCCURS 0 WITH HEADER LINE.
>
> DATA: i_list4 LIKE vbap OCCURS 0 WITH HEADER LINE.
>
>
> *ALV Output Header
> DATA: gt_list_top_of_page TYPE slis_t_listheader,
> prognm LIKE sy-repid,
> gc_formname_top_of_page TYPE slis_formname VALUE
> 'TOP_OF_PAGE',
> gt_events TYPE slis_t_event,
> is_layout TYPE slis_layout_alv,
> is_variant LIKE disvariant,
> it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
>
> DATA:gt_fieldcat TYPE slis_t_fieldcat_alv.
> DATA:gt_outtab LIKE i_list OCCURS 0 WITH HEADER
> LINE.
>
> DATA: g_repid LIKE sy-repid,
> g_count LIKE sy-tabix.
>
> SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME
> TITLE text-t01.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t10.
>
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t11.
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t12.
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN END OF BLOCK block0.
>
> */ Selection and Input Parameters
> SELECTION-SCREEN BEGIN OF BLOCK blocko WITH FRAME
> TITLE text-001.
>
>
>
> SELECT-OPTIONS: s_vbeln FOR vbap-vbeln, "SO
> s_auart FOR vbak-auart DEFAULT 'KB' OBLIGATORY,
> s_matnr FOR vbap-matnr," obligatory,
> s_mvgr1 FOR mvke-mvgr1,
> s_erdat FOR vbap-erdat OBLIGATORY,
> s_werks FOR vbap-werks,
> s_lgort FOR vbap-lgort,
> s_edatu FOR vbep-edatu.
>
> PARAMETERS: p_vkorg LIKE vbak-vkorg DEFAULT '5010'.
>
>
>
> SELECTION-SCREEN SKIP 2.
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> PARAMETERS: p_vari LIKE disvariant-variant.
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
> SELECTION-SCREEN END OF BLOCK blocko.
>
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> DATA: g_save(1) TYPE c,
> * g_default(1) TYPE c,
> g_exit(1) TYPE c,
> gx_variant LIKE disvariant,
> g_variant LIKE disvariant.
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
> * Initialization fieldcatalog
> INITIALIZATION.
>
> * PERFORM clear_tables.
>
> g_repid = sy-repid.
> PERFORM fieldcat_init USING gt_fieldcat[].
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> g_save = 'A'.
> PERFORM variant_init.
> * Get default variant
> gx_variant = g_variant.
> CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
> EXPORTING
> i_save = g_save
> CHANGING
> cs_variant = gx_variant
> EXCEPTIONS
> not_found = 2.
> IF sy-subrc = 0.
> p_vari = gx_variant-variant.
> ENDIF.
>
> AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
> PERFORM f4_for_variant.
>
> AT SELECTION-SCREEN.
> PERFORM auth_check. "+ESC
> PERFORM pai_of_selection_screen.
>
>
>
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
>
> START-OF-SELECTION.
>
> PERFORM get_data.
>
> PERFORM alv.
>
> END-OF-SELECTION.
>
> *----
> -
> * FORM get_data *
> *----
> -
> * ........ *
> *----
> -
> FORM get_data.
> *CH01 - Added kwmeng(order qty) to selection,
> excluded rejects
> *JR -added soldto and shipto code
SELECT a~vbeln a~posnr a~matnr a~erdat a~werks a~lgort
a~kwmeng a~pstyv b~kunnr c~edatu
CH01+
INTO corresponding fields of table i_list
FROM vbap AS a INNER JOIN vbak AS b ON a~vbeln = b~vbeln
INNER JOIN vbep AS c ON a~vbeln = c~vbeln
and a~posnr = c~posnr
WHERE b~vkorg = p_vkorg
AND a~werks IN s_werks
AND a~lgort IN s_lgort
AND b~auart IN s_auart
AND a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~abgru = ''" CH01+
AND a~matnr IN s_matnr
AND c~edatu IN s_edatu.
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> SELECT SINGLE mvgr1 INTO i_list-mvgr1 FROM mvke
> WHERE matnr = i_list-matnr.
> MODIFY i_list.
> CLEAR: i_list.
> ENDLOOP.
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-mvgr1 IN s_mvgr1.
> CONTINUE.
> ELSE.
> DELETE i_list.
> COMMIT WORK AND WAIT.
> ENDIF.
> ENDLOOP.
> * CH01 - commented these lines out and redid logic
> below
> * LOOP AT i_list.
> ** select single vbeln into lips-vbeln from lips
> ** where vgbel = i_list-vbeln
> ** and vgpos = i_list-posnr.
> **
> ** select single wadat_ist into i_list-wadat_ist from
> likp
> ** where vbeln = lips-vbeln.
> *
> * SELECT b~wadat_ist INTO i_list-wadat_ist
> * FROM lips AS a INNER JOIN
> * likp AS b ON a~vbeln = b~vbeln WHERE a~vgbel =
> i_list-vbeln
> * AND a~vgpos = i_list-posnr.
> * MODIFY i_list.
> * CLEAR: i_list, lips-vbeln.
> * ENDSELECT.
> * ENDLOOP.
>
> * CH01 - Changed to select multiple delivery lines &
> del qty
> * summing the total deliveries per OBD# and date
> LOOP AT i_list.
> SELECT avbeln sum( alfimg ) b~wadat_ist
> INTO (i_list-obd , i_list-lfimg , i_list-wadat_ist)
> FROM lips AS a INNER JOIN
> likp AS b ON avbeln = bvbeln WHERE a~vgbel =
> i_list-vbeln
> AND a~vgpos = i_list-posnr
> AND a~pstyv = i_list-pstyv
> group by avbeln bwadat_ist.
> i_list2 = i_list.
> APPEND i_list2.
> ENDSELECT.
> IF sy-subrc <> 0.
> i_list2 = i_list.
> APPEND i_list2.
> ENDIF.
> ENDLOOP.
> i_list[] = i_list2[].
> *End CH01
>
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-wadat_ist IS INITIAL.
> CONTINUE.
> ELSE.
> i_list-days = i_list-wadat_ist - i_list-erdat.
> ENDIF.
> MODIFY i_list.
> CLEAR: i_list.
> COMMIT WORK AND WAIT.
> ENDLOOP.
>
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-vbeln IS INITIAL.
> DELETE i_list.
> ENDIF.
> ENDLOOP.
> COMMIT WORK AND WAIT.
>
> *JR
> LOOP AT i_list.
> SELECT SINGLE KUNNR INTO i_list-shipto FROM vbpa
> WHERE vbeln = i_list-vbeln
> AND parvw = 'WE'.
> MODIFY i_list.
> ENDLOOP.
> *END JR
>
> gt_outtab[] = i_list[].
> COMMIT WORK AND WAIT.
>
>
> ENDFORM.
>
> *----
> -
> * FORM alv *
> *----
> -
> * ........ *
> *----
> -
> FORM alv.
>
> PERFORM e03_eventtab_build USING gt_events[]. "+EC1
> PERFORM e04_comment_build USING
> gt_list_top_of_page[]. "+EC1
> prognm = sy-repid. "+EC1
>
>
> CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
> EXPORTING
> i_callback_user_command = 'USER_COMMAND'
> i_callback_program = g_repid
> it_fieldcat = gt_fieldcat[]
> it_events = gt_events[] "+ESC
> it_sort = it_sort[]
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> is_variant = g_variant
> i_save = g_save
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
> TABLES
> t_outtab = gt_outtab.
>
> COMMIT WORK AND WAIT.
>
>
> ENDFORM.
>
>
> *----
> -
> * FORM fieldcat_init *
> *----
> -
> * ........ *
> *----
> -
> * --> I_FIELDCAT *
> *----
> -
> FORM fieldcat_init
> USING i_fieldcat TYPE slis_t_fieldcat_alv.
> DATA: ls_fieldcat TYPE slis_fieldcat_alv.
> DATA: pos TYPE i VALUE 1.
> CLEAR ls_fieldcat.
Please note to keep on incrementing pos variable for column position.
 pos = pos + 1.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'VBELN'.
> ls_fieldcat-ref_tabname = 'VBAK'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
 pos = pos + 1. ===> after every append to field catalog.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'POSNR'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'ETERN'.
> ls_fieldcat-ref_tabname = 'VBEP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'MATNR'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'MVGR1'.
> ls_fieldcat-ref_tabname = 'MVKE'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'WERKS'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'LGORT'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'ERDAT'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'WADAT_IST'.
> ls_fieldcat-ref_tabname = 'LIKP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'DAYS'.
> ls_fieldcat-ref_fieldname = 'DAYS'.
> ls_fieldcat-seltext_s = '# Of Days'.
> ls_fieldcat-seltext_m = '# Of Days'.
> ls_fieldcat-seltext_l = '# Of Days'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> *Begin CH01
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'KWMENG'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-outputlen = 7.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'LFIMG'.
> ls_fieldcat-ref_tabname = 'LIPS'.
> ls_fieldcat-outputlen = 7.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'OBD'.
> ls_fieldcat-seltext_s = 'OBD'.
> ls_fieldcat-seltext_m = 'Outbound Del'.
> ls_fieldcat-seltext_l = 'Outbound Delivery'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> * ls_fieldcat-col_pos = pos.
> * ls_fieldcat-fieldname = 'OBD_POS'.
> * ls_fieldcat-seltext_s = 'OBD Ln'.
> * ls_fieldcat-seltext_m = 'Outbound Del Ln'.
> * ls_fieldcat-seltext_l = 'Outbound Del Line'.
> * ls_fieldcat-outputlen = 10.
> * APPEND ls_fieldcat TO i_fieldcat.
> * CLEAR ls_fieldcat.
> *
> *End CH01
>
> *JR
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'SOLDTO'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-seltext_m = 'Sold To'.
> ls_fieldcat-seltext_l = 'Sold To'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'SHIPTO'.
> ls_fieldcat-ref_tabname = 'VBPA'.
> ls_fieldcat-seltext_m = 'Ship To'.
> ls_fieldcat-seltext_l = 'Ship To'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
> *END JR
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'EDATU'.
> ls_fieldcat-ref_tabname = 'VBEP'.
> ls_fieldcat-seltext_m = 'Requested Delivery date'.
> ls_fieldcat-seltext_l = 'Requested Delivery date'.
> ls_fieldcat-outputlen = 20.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> *FOR ALV SORT & SUBTOTAL
> CLEAR it_sort.
> it_sort-spos = '0'.
> it_sort-fieldname = 'VBELN'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> CLEAR it_sort.
> it_sort-spos = '1'.
> it_sort-fieldname = 'POSNR'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> it_sort-subtot = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
> *
> CLEAR it_sort.
> it_sort-spos = '2'.
> it_sort-fieldname = 'MATNR'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> CLEAR it_sort.
> it_sort-spos = '3'.
> it_sort-fieldname = 'MVGR1'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
> *
> CLEAR it_sort.
> it_sort-spos = '4'.
> it_sort-fieldname = 'ERDAT'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
>
> CLEAR it_sort.
> it_sort-spos = '5'.
> it_sort-fieldname = 'WADAT_IST'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-down = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> *
> * CLEAR it_sort.
> * it_sort-spos = '6'.
> * it_sort-fieldname = 'PERNR'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> *
> * CLEAR it_sort.
> * it_sort-spos = '7'.
> * it_sort-fieldname = 'VORNA'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '8'.
> * it_sort-fieldname = 'NACHN'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '9'.
> * it_sort-fieldname = 'VKGRP'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '10'.
> * it_sort-fieldname = 'VBELN'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '11'.
> * it_sort-fieldname = 'ERDAT'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '12'.
> * it_sort-fieldname = 'BEZEI'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
>
> * clear it_sort.
> * it_sort-spos = '1'.
> * it_sort-fieldname = 'BELNR'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> * append it_sort.
>
>
> ENDFORM.
>
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> *&----
> -
> *& Form VARIANT_INIT
> *&----
> -
> * text
> *----
> -
> * --> p1 text
> * <-- p2 text
> *----
> -
> FORM variant_init.
> *
> CLEAR g_variant.
> g_variant-report = g_repid.
> ENDFORM. " VARIANT_INIT
>
>
>
> *----
> -
> * FORM f4_for_variant *
> *----
> -
> * ........ *
> *----
> -
> FORM f4_for_variant.
> *
> CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
> EXPORTING
> is_variant = g_variant
> i_save = g_save
> * it_default_fieldcat =
> IMPORTING
> e_exit = g_exit
> es_variant = gx_variant
> EXCEPTIONS
> not_found = 2.
> IF sy-subrc = 2.
> MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
> WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
> ELSE.
> IF g_exit = space.
> p_vari = gx_variant-variant.
> ENDIF.
> ENDIF.
> ENDFORM.
> *&----
> -
> *& Form PAI_OF_SELECTION_SCREEN
> *&----
> -
> * text
> *----
> -
> FORM pai_of_selection_screen.
> *
> IF NOT p_vari IS INITIAL.
> MOVE g_variant TO gx_variant.
> MOVE p_vari TO gx_variant-variant.
> CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
> EXPORTING
> i_save = g_save
> CHANGING
> cs_variant = gx_variant.
> g_variant = gx_variant.
> ELSE.
> PERFORM variant_init.
> ENDIF.
> ENDFORM. " PAI_OF_SELECTION_SCREEN
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
>
> *----
> -
> * FORM e03_eventtab_build *
> *----
> -
> * ........ *
> *----
> -
> * --> E03_LT_EVENTS *
> *----
> -
> FORM e03_eventtab_build USING e03_lt_events TYPE
> slis_t_event.
> DATA: ls_event TYPE slis_alv_event.
>
> CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
> EXPORTING
> i_list_type = 0
> IMPORTING
> et_events = e03_lt_events.
> READ TABLE e03_lt_events WITH KEY name =
> slis_ev_top_of_page
> INTO ls_event.
> IF sy-subrc = 0.
> MOVE gc_formname_top_of_page TO ls_event-form.
> APPEND ls_event TO e03_lt_events.
> ENDIF.
> ENDFORM.
>
> *----
> -
> * FORM e04_comment_build *
> *----
> -
> * ........ *
> *----
> -
> * --> E04_LT_TOP_OF_PAGE *
> *----
> -
> FORM e04_comment_build USING e04_lt_top_of_page TYPE
> slis_t_listheader.
> DATA: ls_line TYPE slis_listheader.
>
> *Report Title
> CLEAR ls_line.
> ls_line-typ = 'H'.
> ls_line-info = text-007.
> APPEND ls_line TO e04_lt_top_of_page.
> *
> *
> **Doc Type Desc.
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-008.
> ** ls_line-info = p_matnr.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-009.
> ** ls_line-info = p_werks.
> * append ls_line to e04_lt_top_of_page.
> *
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-010.
> ** ls_line-info = p_stlan.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-011.
> ** ls_line-info = p_stlal.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-012.
> ** ls_line-info = p_stlal.
> * append ls_line to e04_lt_top_of_page.
>
>
>
> ENDFORM.
>
> *----
> -
> * FORM top_of_page *
> *----
> -
> * ........ *
> *----
> -
> FORM top_of_page.
>
> CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
> EXPORTING
> it_list_commentary = gt_list_top_of_page.
>
>
> ENDFORM.
>
> *----
> -
> * FORM auth_check *
> *----
> -
> * ........ *
> *----
> -
> FORM auth_check.
>
> AUTHORITY-CHECK OBJECT 'V_VBAK_VKO'
> ID 'VKORG' FIELD p_vkorg.
> IF sy-subrc NE 0.
> MESSAGE e054 WITH p_vkorg.
> ENDIF.
>
>
> ENDFORM. " auth_check
>
>
> *&----
> -
> *& Form USER_COMMAND
> *&----
> -
> FORM user_command USING r_ucomm LIKE sy-ucomm
> rs_selfield TYPE slis_selfield.
>
> CASE r_ucomm.
> WHEN '&IC1'.
> PERFORM display_so_order USING r_ucomm
> rs_selfield.
>
> ENDCASE.
>
> ENDFORM.
>
> *&----
> -
> *& Form display_sales_order
> *&----
> -
> * text
> *----
> -
> * -->P_R_UCOMM text
> * -->P_RS_SELFIELD text
> *----
> -
> FORM display_so_order USING r_ucomm LIKE sy-ucomm
> rs_selfield TYPE slis_selfield.
>
> CASE rs_selfield-sel_tab_field.
> WHEN '1-VBELN'.
> SET PARAMETER ID 'AUN' FIELD rs_selfield-value.
> CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
> WHEN '1-MATNR'.
> SET PARAMETER ID 'MAT' FIELD rs_selfield-value.
> CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
> WHEN '1-OBD'.
> SET PARAMETER ID 'VL' FIELD rs_selfield-value.
> CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
> WHEN OTHERS.
> MESSAGE i000(z1) WITH 'Please Click on the Valid
> Selection'.
> EXIT.
> ENDCASE.
>
>
> ENDFORM. " display_sales_order
>
> *----
> -
> * FORM EDit_table *
> *----
> -
> * ........ *
> *----
> -
Message was edited by: Anurag Bankley

How to download data into one cell of excel in different lines

Hi All,
My Report downloads data from R/3 to excel. Now one particular field contains multiple lines, which i needs to download into different lines into that particular cell(of excel). how can i do this.
I found one method for this and that is cl_abap_char_utilities=>newline.But this is in abap version 6.0.
But i am working in version 4.6c. do we have any method or anything that meets my requirement in 4.6c.
Please let me know.
Thanx in Advance
Subhani.

why do you split them to the internal table ,then download it?
Is you special field long text?
If is ,you can use FM READ_TEXT to put it into an internal table ,then download it.

How to print the address of a smart form in different line?

hi ,
I have a smartform for payment advice. It's working properly but problem is in address window. i am using sap's given address window . City district and pincode is showing in same line i want to display it different line. initially i didnot use address window I pass all the address field to the smartform but then problem is if any field is empty it showing the blanline in output of smartform then i use address window. how can i show city district and pincode in different line ? i need your suggestion.

Hi friend,
Yes the link will provide you the information required. But it too has few disadvantages because in some cases it may also fail.
Else just do like this create an internal table of line type string. Add all the address details into it as you required.(Here you have provision to add the format ie you can decide which line should contain which data). Then do delete blank lines.
Then loop the internal table and print the address this will solve your problem. In my project i solved the issue like this.
If you still have queries please revert back to me i will help you.
Thanks,
Sri Hari.

I used an upgrade from a different phone to purchase a new iPhone. How do I assign that phone its original number (not the one that it was upgraded from)?

I used an upgrade from a different phone to purchase a new iPhone. How do I assign that phone its original number (not the one that it was upgraded from)?

Phone number of the device is assigned by the carrier.
Ask the carrier.

Different Cost Centers for Different Line Items in a single Reservation

Hello Gurus,
When we create a Material Reservation, we give the cost center at the header level and that cost center is accounted for each of the line items in the reservation. But when the reservation has many line items which depend on different cost centers, there is a need to enter different cost centers for different line items in the same Material Reservation. How can this be done? Please suggest.

Hi,
It's a standard restriction in SAP functionality where one reservation document can only accommodate one cost center.
You can not maintain multiple cost centres for individual line items.
You have to create seperate Reservations for each cost centre.
check below thread:
ONE RESERVATION FOR DIFF COST CENTERS
Umakanth R
Edited by: Umakanth R on Dec 8, 2011 7:53 AM

Printing multiple PR with different line items in smartform

Hello all,
I have an requirement to print multiple PR with different line items on different pages.
So,suppose two PR are there,PR1 and PR2 with n no of line items,then i should get each PR on different page with its line items.
Note: One loop processing is already there on line items.
Best Regards,
Anurodh

Hi,
Fetch all the PRs and its corresponding items into 2 different table. Then Loop at the internal whihc contains the PRs and call the 2nd internal table for its items and call the FM for smartforms and pass them.
LOOP AT it_PR.
fetch all the items into it_PR_item
Call Function Fnam
Passign the it_PR_item
ENDLOOP.
Regards,
Aditya

Compare two string in different line in textarea

import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class TextCounterPanel extends JPanel {
private JTextArea textInput;
private JLabel lineCountLabel;
                    public TextCounterPanel() {
                    setBackground(Color.DARK_GRAY);
                    textInput = new JTextArea();
                    textInput.setBackground(Color.WHITE);
                    JPanel south = new JPanel();
                    south.setBackground(Color.DARK_GRAY);
                    south.setLayout( new GridLayout(4,1,2,2) );
                         JButton countButton = new JButton("Process the Text");
                         countButton.addActionListener( new ActionListener() {
                              public void actionPerformed(ActionEvent evt) {
                                   processInput();
                         south.add(countButton);
                    lineCountLabel = new JLabel(" Number of lines:");
                    lineCountLabel.setBackground(Color.WHITE);
                    lineCountLabel.setForeground(Color.BLUE);
                    lineCountLabel.setOpaque(true);
                    south.add(lineCountLabel);
                    setLayout( new BorderLayout(2,2) );
                    setBorder(BorderFactory.createLineBorder(Color.DARK_GRAY));
                    JScrollPane scroller = new JScrollPane( textInput );
                    add(scroller, BorderLayout.CENTER);
                    add(south, BorderLayout.SOUTH);
public void processInput() {
String text,vin; // The user's input from the text area.
text = textInput.getText();
vin =text.substring(25,42);
lineCountLabel.setText(" vin: " + vin);
} // end class TextCounterPanel
How can I compare two string in different line in text area

import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class TextCounterPanel extends JPanel {
private JTextArea textInput;
private JLabel lineCountLabel;
public TextCounterPanel() {
setBackground(Color.DARK_GRAY);
textInput = new JTextArea();
textInput.setBackground(Color.WHITE);
JPanel south = new JPanel();
south.setBackground(Color.DARK_GRAY);
south.setLayout( new GridLayout(4,1,2,2) );
JButton countButton = new JButton("Process the Text");
countButton.addActionListener( new ActionListener() {
public void actionPerformed(ActionEvent evt) {
processInput();
south.add(countButton);
lineCountLabel = new JLabel(" Number of lines:");
lineCountLabel.setBackground(Color.WHITE);
lineCountLabel.setForeground(Color.BLUE);
lineCountLabel.setOpaque(true);
south.add(lineCountLabel);
setLayout( new BorderLayout(2,2) );
setBorder(BorderFactory.createLineBorder(Color.DARK_GRAY));
JScrollPane scroller = new JScrollPane( textInput );
add(scroller, BorderLayout.CENTER);
add(south, BorderLayout.SOUTH);
public void processInput() {
String text,vin; // The user's input from the text area.
text = textInput.getText();
vin =text.substring(25,42);
lineCountLabel.setText(" vin: " + vin);
} // end class TextCounterPanel

I have an old dell computer that my itunes is currently on, can i some how switch my itunes to a different computer?

i have an old dell computer that my itunes is currently on, can i some how switch my itunes to a different computer?
im planning on getting rid of this computer and getting a macbook, i still want to keeo all my songs in my library, what could i do?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

Switching an upgrade to a different line

Similar Messages

Maybe you are looking for