SXMB_MONI : Mapping exception error - cause unknown

Hi! ALL
I am getting a mapping exception error....
However, if i copy the payload and run it through my test tab it is getting processed successfully.
Is there any other way i can debug this issue....as i do not see any problem with payload or the message mapping and I am getting the following  error...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--  Request Message Mapping
  -->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
  <SAP:Category>Application</SAP:Category>
  <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
  <SAP:ApplicationFaultMessage namespace="" />
  <SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_mm_204: RuntimeException in Message-Mapping transformatio</SAP:Stack>
  <SAP:Retry>M</SAP:Retry>
  </SAP:Error>
Your help is greatly appreciated!!
Thank you,
Patrick.

Dear Patrick,
As our experts told you can trace by using ST01 and select your ID and start the trace then again test be editing and reactivating the scenario and test it again then you ill came to know if in case any issues.
1. Other way to test the scenario is Goto RWB--> Component Monitoring --> Select Adapter Monitoring --> Then select the TEST MESSAGE TAB and give Interface details inputs or copy or take your pay load from MONI and past here and check and changes are to be made and then test the message there itself .
2. Also as u can test the message in Message Mapping TEST TAB and test the mapping and also parallely do Cache Refresh in SXI_CACHE.
3. You can also check the status of the message in SYSEM STACK of message monitoring this is different from RWB message moni
[http://Host name:PORT/MessagingSystem/monitor/systemStatus.jsp]
4. YOu can also trace the message through this system stack also.
Regards:
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Jan 30, 2009 8:53 AM

Similar Messages

  • Mapping exception error in MM-SUS interface

    Hi..
    I am doing MM-SUS Standard Interfaces, when we are sending the Goods Receipt from R/3 to SUS it is throwing the mapping exception eror. yesterday it was working fine.
    Today its not working , I have not made any changes.
    it is throwing error in SXMB_MONI. i.e
       <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM2SUSGoodsReceipt_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException:</SAP:P2>
      <SAP:P3>RuntimeException in Message-Mapping transformation</SAP:P3>
      <SAP:P4>: Cannot produce target element /ns:ServiceAcknow~</SAP:P4>
    In Trace it is showing the error like this.
    <Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM2SUSGoodsReceipt_ Thrown: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns:ServiceAcknowledgementInformation/ServiceAcknowledgement/ID. Queue does not have enough values in context. Target XSD requires a value for this element, but target-field mapping does not produce one. XML instance is probably not valid for source XSD, or target-field mapping does not fulfil requirements of target XSD. at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:406) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:134) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:127) at
    Pls suggest me , how can i resolve this error.
    Regards,
    Pasi.

    can you please check with the data which was sent yesterday and run the interface , if it is working then i guess in the latest data u are getting the queue values with the more occurance, thats why u r getting this error.
    may be u r getting more ID values in ServiceAcknowledgement Node where ID element would be having less occurance.
    -Madhav

  • Hibernate Mapping Exception Error reading resource: Help Please

    I've downloaded Hibernate this weekend and have been working at getting this up and running in my spare time. I've run into a problem and can't seem to find the solution. I'm hoping some one here can help me out.
    I'm running MyEclipse
    MySQL
    and Hibernate 2 in a struts application
    I've only got one form and table that I'm trying to map right now, but I get the above error when I run this line of code.
    Configuration cfg = new Configuration().addClass(AddCustomerForm.class);
    Does anyone have any ideas. Here are the important sections from the two configuration files
    <!-- hibernate.cfg.xml-->
    <hibernate-configuration>
        <session-factory>
            <!-- properties -->
            <property name="connection.username">PaintTracker</property>
            <property name="connection.url">jdbc:mysql://127.0.0.1:3306/PaintTracker</property>
            <property name="dialect">net.sf.hibernate.dialect.MySQLDialect</property>
            <property name="connection.password">PaintTracker</property>
            <property name="connection.driver_class">com.mysql.jdbc.Driver</property>
            <property name="show_sql">true</property>
            <mapping resource="com/PaintTracker/struts/form/AddCustomerForm.hbm.xml"/>
        </session-factory>
    <!--AddCustomerForm.hbm.xml -->
    <hibernate-mapping>
         <class name="com.PaintTracker.struts.form.AddCustomerForm" table="customer">
              <id name="customerID" column="CustomerID" type="java.lang.Long" unsaved-value="0">
                   <generator class="identity"/>
              </id>
              <property name="firstName" column="FirstName" type="java.lang.String"/>
              <property name="lastName" column="LastName" type="java.lang.String"/>
              <property name="streetAddress" column="StreetAddress" type="java.lang.String"/>
              <property name="middleInitial" column="MiddleInitial" type="java.lang.String"/>
              <property name="city" column="City" type="java.lang.String"/>
              <property name="state" column="State" type="java.lang.String"/>
              <property name="zipCode" column="ZipCode" type="java.lang.String"/>
              <property name="phoneNumber" column="PhoneNumber" type="java.lang.Long"/>
              <property name="emailAddressLeft" column="EmailAddressLeft" type="java.lang.String"/>
              <property name="emailAddressRight" column="EmailAddressRight" type="java.lang.String"/>
              <property name="company" column="Company" type="java.lang.String"/>          
         </class>
    </hibernate-mapping>

    ok finally gotten back to this and rewrote a bunch of the code. I'm getting almost the same error, but not quite.
    I'm still getting org.hibernate.MappingException: Error reading resource: but it is pointing to the first mapping resource located inside the hibernate.cfg.xml.. so I know it is finding and making it inside the hibernate.cfg.xml.
    this is the code that the exception occurs in.
    the actual line is the configuration.configure(); in the else statement.
    public HibernateUtil(URL url2) {
              Configuration configuration = new Configuration();
              log.info("configuration_static is null");
              log.debug("configuring configuration_static from " + url2);
              try {
                   if (url2 != null)
                        configuration.configure(url2);
                   else
                        configuration.configure();
                   this.sessionFactory = configuration.buildSessionFactory();
                   log.info("Configuration complete");
              } catch (HibernateException e) {
                   log.error(e);
                   System.out.println(e);
                   configuration = null;
                   log.info("Configuration failed.  Setting config to null!");
         }The resource I am trying to read is located correctly (eclipse lets you navigate to and choose the xml file to use.. it then builds the hibernate.cfg.xml file for you.)
    here is a copy of the resource that is giving me a problem... whichever resource I have listed first is the one the exception is thrown for... so I'm hoping I just have something mixed up in the way I'm writing my xml files.
    <hibernate-mapping package="com.WorkoutTracker.db.model">
         <class name="com.WorkoutTracker.db.model.User" table="user">
              <id name="userID" column="userId" type="java.lang.Long" unsaved-value="0">
                   <generator class="increment"/>
              </id>
              <property name="userFName" column="userFName" type="java.lang.String"/>
              <property name="userLName" column="userLName" type="java.lang.String"/>
         </class>
    </hibernate-mapping>

  • Mapping location errors caused by 3G

    I was very puzzled as my iPod touch could locate me within 20 m in the house whereas my iphone thought I was 200km away and only when I went outside and A-GPS could work did it correct itself. However I have discovered if I turn off 3G then the map location immediately switches to the correct location. If I turn off all cellular functions ( airplane mode ) and just use wireless again the location is accurate. I assume it is using cell towers to triangulate when A-GPS is not available and wonder if the 3G signal is interfering and hence leading to the wrong result. Anyway there is clearly a bug and I wondered if anyone else has the same problem.

    for anyone that googles this error, i resolved this error by using SMQ1/SMQ2 and restarting some jobs that were in SYSFAIL status

  • Process Chain Ended with Errors - cause unknown

    I have had several instances of process chains stopping for no apparent reason.  The stops occur between 2 master data infopackage loads.  The last step is green and the next is grey.  The PSA table has been updated successfully for the last step.  All IDocs are in green status in both systems.  The monitor for the last successful step does say "Ended with Errors" although no errors are evident.  The process chain starts back up via Repeat at the next (grey) step and continues successfully.  There were no system problems or connection interruptions that occurred during the time the process chains failed.  There were no changes in the remote user profile.
    This exact problem has occurred a half dozen times since our application of ECC Support Packs several months ago and had not occurred before.  The infopackages are different each time. Two different process chains have had this problem.  I have re-activated and re-scheduled the process chains without solving the problem.
    Thanks for any ideas on why this may be occurring or what I can do to prevent it.
    Patty Moffatt

    Hi Des,
    Here's my BW release info:
    SAP_ABA        640       0019 SAPKA64019     Cross-Application
    SAP_BASIS      640       0019 SAPKB64019     SAP Basis          
    PI_BASIS       2005_1_6400009 SAPKIPYJ69     Basis Plug-In
    ST-PI          2005_1_6400008 SAPKITLQH8     SAP Solution Tools Plug-
    SAP_BW         350       0019 SAPKW35019   SAP_BW                      
    ECC SPs 13-21 were applied before the BW problem started:
    SAP_BASIS      640       0021 SAPKB64021    
    SAP_ABA        640       0021 SAPKA64021    
    PI_BASIS       2005_1_6400012 SAPKIPYJ6C   
    ST-PI          2005_1_6400008 SAPKITLQH8    
    SAP_BW         350       0021 SAPKW35021   
    PI             2004_1_5000016 SAPKIPZI6G    
    The process chain step and the monitor load both are green.  The Details tab shows all the processing is green, but the Process Chain itself is red with "Errors Occurred.  There have been no runtime dumps.
    Patty

  • Send Alerts(e-mail) for errors in SXMB_MONI(message mapping exceptions)

    Good afternoon !
            I´m configuring SAP Netweaver PI 7.0(SP13) to use Alert Framework to send Alerts when errors occurs in the interfaces processing.
            I just achieved configure to send alerts when errors ocurrs in the Adapter Framework but, I can´t configure correctly to send alerts when errors ocurred only in SXMB_MONI(for example, message mapping exception in asyncronous interface).
            I just followed the instructions at Michal Krawczyk
    weblog(/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step) and, initially, this was not sufficient to start to send alert when errors occurs only on SXMB_MONI, so, I researched and found some configurations to do in CCMS(started from here: http://help.sap.com/saphelp_nw70/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/content.htm), jobs to start events collectors, etc, and after this, I could see a mail for an message mapping exception. BUT, this message, sent from CCMS to ALM, doesn´t carry out all the message parameters, like message Id, sender(service, interface), receiver(service, interface), that is very important to help to find the message with errors to be solved.
            There is somebody here that already done the Alert configuration to send messages for errors found only in SXMB_MONI(Monitor for processed XML Messages) ?
            There is a better way to achieve this ?
            Thank you for your attention,
            Wilson Rodrigo dos Santos
            SAP Netweaver XI/PI Consultant

    Hi
    Go through these links and follow it.
    ALERTS CONFIG AND STUFF
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    XI: Alerts - Step by step
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
    Triggering by Calling a Function Module Directly.
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Alerts with variables from the messages payload (XI) u2013 UPDATED
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    Simple Steps to Get Descriptive Alerts from BPM in XI
    /people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
    Triggering XI Alerts from a User Defined Function
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Throwing Smart Exceptions in XI Graphical Mapping
    /people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
    /people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    /people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
    /people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
    http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    check this links.
    https://www.sdn.sap.com/irj/sdn/forums
    Trouble shooting Alert configuration:
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    Alert Inbox
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    Alert Notification Step-by-Step
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    Defining Alert Classifications
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    Triggering Alerts
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    Setting up alerts
    Setting up alerts in RZ20
    Alert Management
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
    Alert Notification
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
    /people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
    Thanks
    Saiyog

  • Error in crawl log "Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "

    Hi 
    I get the following error in my crawl logs
    "Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "
    Because of this i suspect, the search results are not including those aspx pages marked as "Hide physical urls from search".
    This error is not available in the another environment where the aspx pages are coming in the results.
    Thanks
    Joe

    Hi Joe,
    Greetings!
    Reset the index and re-crawl. That usually clears it
    If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
    Probably you need to debug the BDC code that underlies the external content types.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/41a86c43-151d-47cd-af73-967a4c940611/lotus-notes-connector-error-while-crawling-lob-contents?forum=sharepointsearch
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Error while crawling LOB contents (Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException)

    Everytime when I perform a Full Crawl on the Central Administraion page, this error will appear and the crawl process will run into an infinite loop and nothing crawl success. I have tried delete and re-create the crawling content sources, start/stop
    the search services but this error still appear.
    Please help. Thanks a lot.
    Error Message:
    topicpages://
    Error while crawling LOB contents.
    ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
    The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
    System.Net.WebException The request failed with HTTP status 404: Not Found.;
    SearchID = EFE3FAA4-12C3-40AD-B410-51D6189FC720 )

    Tried scheduled an incremental every 10 minutes
    Still getting error on crawling LOB contents. The incremental crawl ran into an infinite loop and nothing crawl success
    Thanks for help.
    Error Message:
    topicpages://(servername)
    Error while crawling LOB contents.
     ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
    The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
    System.Net.WebException The request failed with HTTP status 404: Not Found.;
    SearchID = B801BC11-8138-453F-AB4D-AA4BE4F5B57A )

  • Alerts for SXMB_MONI mapping errors, RWB errors

    Hi,
    We are having solman 7.0 with EHP1/oracle on HP-UX.
    I have to configure CCMS alerts for SXMB_MONI mapping errors, RWB errors for PI system(SAP EHP 1 for SAP NetWeaver 7.1).
    I cant find any MTE related to  SXMB_MONI mapping errors or RWB errors under the PI system in my CEN.
    So, can anyone please guide me to configure this?
    Thanks
    Nanda

    Hello Nanda,
    you have to configure ALert Categories in the Alert Framework (ALM) before any MTE are shown in CCMS. And then you would see the MTE in the local CCMS of your PI system.
    Configuration steps are descirbed in the PDF "Setup Guide for Interface Monitoring" under http://service.sap.com/bpm > Media Library > Technical Information. In thisdocument you can also learn how the CCMS MTEs can be integrated with Business Process Monitoring in SAP Solution Manager. And actually BPMon provides some new monitoring capabilites for the Java part of PI that are not covered via CCMS at all.
    Best Regards
    Volker

  • Javaw has caused an error in unknown .

    I need help to correct the following problem. (I am running ME on a Dell Inspiron 8000 find the following when I access the control panel):
    start > settings > control panel > java plug-in 1.4.0_02
    after a few seconds I get the error msg:
    "Javaw has caused an error in <unknown>. Javaw will now
    close."
    I suspect this problem to be the cause of IE6 freezing up when accessing certain websites, and the cause of Opera closing down when I hit certain sites.

    Reinstall your JRE or try using a different version and see if that makes a difference

  • Windows 7 Speech Recognition causes Flash Player exception error in Firefox

    I have a strange problem.
    My system is Windows 7 Ultimate X64 SP1.
    Today I started working with Windows Speech Recognition. I found that if I have Speech Recognition running before I launch Firefox 30.0, I get a Flash Player Plug-in Exception error when I load certain websites.
    The version of Flash Player (Shockwave Flash) is 14.0.0.14.
    I also have SilverLight Plug-In 5.1.20913.0 installed and active.
    The problem does not occur when I use IE 10.0.9200.16798 to load the same website.
    One of the websites on which the error occurs is: www.bikeforums.net. The error appears as soon as the home page is finished loading.
    The exact error reads as follows:
    FlashPlayerPlugin_14_0_0_145.exe - Application Error
    The exception unknown software exception (0xc0000710) occurred in the application in location 0x774aa289.
    Any ideas?
    Thanks
    FW

    The problem does not occur when I use IE 10.0.9200.16798 to load the same website.
    Hi,
    Since IE works properly, it should not be Windows problem. Please try to check Firefox forum for an answer.
    Roger Lu
    TechNet Community Support

  • NISE virtual device causes LabVIEW exception error

    I can't delete a virtual device because when selected it causes an exception error in LabVIEW. I'm running MAX 4.1 with DAQmx8.3. Do I need to uninstall everything and then reinstall to correct this error?
    kph

    Okay here is what I remember...
    I had MAX 4.0 installed on the computer (not sure of the DAXmx version but probably 8.1) and I went to export a NISE virtual device to a network drive. At that time MAX froze up and I had to kill it with task manager. When I reopened MAX the virtual device gave me a LabVIEW error when I selected it. I was able to rename it and replace it with a backed up version. I then went to delete it but MAX continued to lock up. I read in the discussion forums about the export to network drive issue and the fix with MAX 4.1 so I downloaded DAQmx 8.3 with MAX 4.1 and installed it. Afterwards MAX seemed more stable but I still get the LabVIEW error when I try to select the renamed (broken) virtual device. Also since this started I've been getting weird exception errors when I run my TestStand/LabVIEW code.
    Any help will be greatly appreciated.
    kph

  • Removing Exception Handling Causes Compiler Error

    I am very new to Java. I have a background in other programming languages including Ruby. I am in need of a convenient means to parse XML code. I picked up the code shown at the end of this message on the Internet. In its original form, it works perfectly. I experimented by trying to comment out the try block as you can see. I was surprised to find that in that form it wouldn't compile. In essence, I thought what I was doing was simply removing exception handling. I figured that since the code worked and there were no exceptions being thrown, it would work just fine for experimentation purposes. (I understand that I would not want to do this in production mode.) Can someone please explain to me why removing the exception handling causes the program to fail to compile?
    Thanks for any input.
    ... doug
    /* Experimental Code */
    /* http://www.mkyong.com/java/how-to-read-xml-file-in-java-dom-parser/ */
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.parsers.DocumentBuilder;
    import org.w3c.dom.Document;
    import org.w3c.dom.NodeList;
    import org.w3c.dom.Node;
    import org.w3c.dom.Element;
    import java.io.File;
    public class ReadXMLFile {
    public static void main(String argv[]) {
    try {
    File fXmlFile = new File("ReadXMLFile.xml");
    DocumentBuilderFactory dbFactory = DocumentBuilderFactory.newInstance();
    DocumentBuilder dBuilder = dbFactory.newDocumentBuilder();
    Document doc = dBuilder.parse(fXmlFile);
    doc.getDocumentElement().normalize();
    System.out.println("Root element :" + doc.getDocumentElement().getNodeName());
    NodeList nList = doc.getElementsByTagName("staff");
    System.out.println("-----------------------");
    for (int temp = 0; temp < nList.getLength(); temp++) {
    Node nNode = nList.item(temp);     
    if (nNode.getNodeType() == Node.ELEMENT_NODE) {
    Element eElement = (Element) nNode;
    System.out.println("First Name : " + getTagValue("firstname",eElement));
    System.out.println("Last Name : " + getTagValue("lastname",eElement));
    System.out.println("Nick Name : " + getTagValue("nickname",eElement));
    System.out.println("Salary : " + getTagValue("salary",eElement));
    } catch (Exception e) {
    e.printStackTrace();
    private static String getTagValue(String sTag, Element eElement){
    NodeList nlList= eElement.getElementsByTagName(sTag).item(0).getChildNodes();
    Node nValue = (Node) nlList.item(0);
    return nValue.getNodeValue();
    }

    877757 wrote:
    I figured that since the code worked and there were no exceptions being thrown, it would work just fine for experimentation purposes. The compiler doesn't know that your code works. It only knows that some method you call can throw some checked exception, and it requires you to catch it or declare that you don't.

  • Upgrading instance to PL 10 on Web Tools - causes Unhandled Exception Error

    Help - trying to do an upgrade to an existing PL 08 Web Tools live site on a hosted Web Server.
    When I run the installer and as to do an upgrade to an existing instance, I hit the finish (or really start) button and I get this unhandled exception error
    Any ideas???? Thanks
    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.
    Exception Text **************
    System.IO.FileLoadException: Could not load file or assembly 'NetPoint.API, Version=2007.0.630.10, Culture=neutral, PublicKeyToken=d935c97cd97f6431' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
    File name: 'NetPoint.API, Version=2007.0.630.10, Culture=neutral, PublicKeyToken=d935c97cd97f6431'
       at Installer.Workers.BackupDBWorker.OnDoWork(DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
    Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    Installer
        Assembly Version: 2007.0.630.10
        Win32 Version: 2007.0.630.10
        CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One%20Web%20Tools/Installer/Installer.exe
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    System.ServiceProcess
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.ServiceProcess/2.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll
    Accessibility
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
    System.Data
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
    JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.

    In all likelihood, the dlls are not being replaced because they are in use, and the installer is trying to load the old version which did not get replaced.
    You can try manually turning off the synch service and messaging service. Also, make sure the synch manager is not running.
    Then uninstall. 
    Check the installer and synchmanager directoriesw in your C:\Program Files\SAP\SAP Business One Web Tools folder (or where ever it was installed) to make sure all .dll and .exe files have been removed.  If not, something is probably still open an using them.
    If the dll and exes have been cleared out. Then run the installer (the installer that installs the installer )
    check the version of the files that were installed in synchmanager and installer directories. 
    they should be 2007.0.630.10.

  • RuntimeException in Message-Mapping transformatio error in txt to txt  fcc

    hi
    in my design part i executed my mapping program , it executed successfully
    my src is
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:mt_sarat_txttxt_sender xmlns:ns0="http://Sarat">
       <Company>
          <Header>
             <Key1>H</Key1>
             <RecordId>123</RecordId>
             <PlantName>abc</PlantName>
          </Header>
          <Item>
             <Key2>I</Key2>
             <MaterialId>456</MaterialId>
             <Quantity>def</Quantity>
          </Item>
       </Company>
    </ns0:mt_sarat_txttxt_sender>
    IN SXMB_MONI   i got RuntimeException in Message-Mapping transformatio error
    i reffered some blog according to their sugessition  do as follows
    Go to SXMB_MONI and get the source xml from there and test it in the IR->Mapping Editor
    my source xml is
    <?xml version="1.0" encoding="utf-8" ?>
    - <ns:mt_sarat_txttxt_sender xmlns:ns="http://Sarat">
    - <Company>
    - <Header>
      <Key1>H</Key1>
      <RecordId>123</RecordId>
      <PlantName>abc</PlantName>
      </Header>
    - <Item>
      <Key2>I</Key2>
      <materialId>456</materialId>
      <Quantity>def</Quantity>
      </Item>
      </Company>
      </ns:mt_sarat_txttxt_sender>
    when i executed in mapping editor it gives fatal error
    Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:130) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68) Root Cause: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3)(:main:, row=2, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2668) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2713) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:132) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:142) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68) -
    at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68) Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2668) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2713) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:132) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:142) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) ... 3 more Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3)
    but i have mapped main nodes in message message mapping.
    waiting for answers,
    mahesh

    got it maheshwar
    in FCC you have given small "m" .
    <materialId>456</materialId>
    but in data type its caps..
    <MaterialId>456</MaterialId>
    change it in sender comm channel and it will work..
    dont forget to award points..
    regards
    pushkar

Maybe you are looking for

  • RFC WSDL need to publish in Service Registry or not?

    Hi, I have created a webservice(WSDL) using SOAMANAGER for Remote Function Call(RFC) developed in R/3 System. This WSDL will be used in Enterprise Portal for our Web Application. Is it required to publish the Webservice in Service Registry? What is t

  • Embedding into a web page, but how to connect to an SWF on the media server

    If I do something like this it works fine. helloWorld.swf is an interactive SWF file thats on my application server. It then accepts parameters and successfully makes a connection to my FMS. <object width="600" height="600" classid="clsid:d27cdb6e-ae

  • Collaborating on a iWeb site

    Hi, I'm going to design a site for a friend who will then pick up managing the content once we are done. Can anyone provide simple instructions for how I should set this up so she'll have it on her mac once I am done? I've been reading and I think th

  • BRARCHIVE stage copy (ftp) ERROR

    Dear All, We are recently facing a typical BRARCHIVE error, where we are moving the generated offline redo logs using FTP  to a different central server & backup to tape will be taken from the same. But from a few days we are facing a error as shown

  • Relation between Date Profile and Action Profile

    Hi Folks, I don't want any date profile assigned to my transaction type SLFN. When I took out date profile and saved system gave me error "Action profile is only allowed with date profile SLNF_HEADER". I have assigned Z action profile to SLFN. Is the