Sync config between active and standby CSM

Is there a way to sync config between active and standby CSMs? Just as one that in CSS.
How about two SSL Service module in two different 6500 chassis?
Thanks.

HI,
there is right now no command to commit redundancy between two CSM-Modules. Maybe in the future there will be one. Okay in regards of sync the only way is to check for redundancy is the show mod csm x ft command. But be aware that some slight differences like a real not being in service are sometimes not recognized.
In regards of the SSLModule there is no way as far as I know to sync them. This won't be present in the future in my opinion as there are certificates which require a password or something like that and one won't be able to do redundncy without those passwords. So In my opinion no way to sync two SSL-Module because of security issues.
Kind regards,
Joerg

Similar Messages

Goldengate between active and standby database server

Hi:
I want to make goldengate connection between active and standby database servers (bidirectional). is it possible?
if yes what steps is required rather than active-active connection.
PLease help!!!
Regards,
Abhishek

What do you mean by "standby" server? If you are referring to a Data Guard standby, how would bidirectional work? That's why one is primary, the other is standby.
If you are doing A-A, your "standby" is just another master in the N-way master architecture, so you already have a bi-di setup, right? Are you looking to replace Streams with GG?

HA SSO doesnt sync certificates between primary and standby

Hi,
Since the HA SSO doesn't sync device certificates, how do I get the certs used to authenticate devices (laptops) onto the standby controller?
Thanks.

You need to disable AP SSO and once broken apart, you install the certificate on the HA (secondary). Once you install the cert and reboot the WLC, then you can enable AP SSO.
This is the only way.

V$dataguard_stats showing 8 hrs delay between Primary and standby

Hello All,
My Primary and standby database are in sync but v$dataguard_stats on standby server showing 8 hrs delay between Primary and standby.
DB Version:11.2.0.1.0
Server :AIX
Primary:
SQL> select /*+ FULL(c) PARALLEL(c, 35) */ distinct SEQUENCE# "Last Sequence Generated" FROM V$ARCHIVED_LOG c WHERE (THREAD#,FIRST_TIME ) IN (select /*+ FULL(c) PARALLEL(c, 35) */ THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG c GROUP BY THREAD#);
Last Sequence Generated
                   4521
Standby:
SQL> SELECT APPL.SEQUENCE# "Last Sequence Applied"
FROM (SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
2    3 (SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
4 WHERE ARCH.THREAD# = APPL.THREAD#;
Last Sequence Applied
                 4521
SQL> SELECT ARCH.THREAD# "Thread", ARCH.SEQUENCE# "Last Sequence Received", APPL.SEQUENCE# "Last Sequence Applied", (ARCH.SEQUENCE# - APPL.SEQUENCE#) "Difference"
2 FROM (SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
3 (SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
WHERE ARCH.THREAD# = APPL.THREAD#;
4
    Thread Last Sequence Received Last Sequence Applied Difference
         1                   4521                  4521          0
SQL> select name, 'Hours', to_number(substr(value,5,2)) from v$dataguard_stats where name = 'apply lag' ;
NAME                             'HOUR TO_NUMBER(SUBSTR(VALUE,5,2))
apply lag                        Hours                            8------------------------------------------------------------------>>>Problem area

SQL> SELECT status, error
FROM V$ARCHIVE_DEST_STATUS
WHERE STATUS <> 'DEFERRED' AND STATUS <> 'INACTIVE'; 2    3
STATUS    ERROR
VALID
VALID
Standby--Generally in Night it happens that primary and standby 'apply lag' is 8/10/4 hrs .When manually checked database are in sync but v$dataguard_stats showing difference in hrs
NAME                             'AL
SUBSTR(VALUE,1,12)
apply lag                        ALL
+00 04:11:03
SQL> SQL>   2
NAME                             'SECOND TO_NUMBER(SUBSTR(VALUE,11,2))
apply lag                        Seconds                             3
SQL> SQL>   2
NAME                             'MINUTE TO_NUMBER(SUBSTR(VALUE,8,2))
apply lag                        Minutes                           11
SQL> SQL>   2
NAME                             'HOUR TO_NUMBER(SUBSTR(VALUE,5,2))
apply lag                        Hours                            4
SQL> SQL>   2
NAME                             'DAY TO_NUMBER(SUBSTR(VALUE,2,2))
apply lag                        Days                            0

CSCuc72466 - Spine Control Bus fail in both active and standby - 2

Hello,
we have running Version 5.2.(7) on "Nexus7000 C7010 (10 Slot) Chassis with 2 "Supervisor module-1X" N7K-SUP1
our system is affected by this bug today.
mery cristmas and happy new year!

Spine Control Bus fail in both active and standby
CSCuc72466
-->
Description
Symptom:
SpineControlBus diagnostic test failure on active and/or standby supervisor.
Conditions:
This happens when active and standby supervisors run the Spine test at the same time.
Workaround:
Configure the following for the module in question (only one SUP, even if both have the error):
NOTE: Test 11 is for Sup1, Test 10 is for Sup2
N7K(config)# no diagnostic monitor module 5 test 11
N7K(config)# diagnostic clear result module 5 test 11
N7K(config)# diagnostic monitor interval module 5 test 11 hour 0 min 0 second 31
N7K(config)# diagnostic monitor module 5 test 11
N7K(config)# diagnostic start module 5 test 11
This workaround will decrease the possibility of this condition occurring but does not guarantee that the diagnostic failure will never be encountered. For that the customer needs to upgrade to the proper code with this fix.
Further Problem Description:
Customer Visible
Save Bug
Open Support Case
View Bug in CDETS
Was the description about this Bug Helpful?
(10)
Details
Last Modified:
Feb 28,2015
Status:
Fixed
Severity:
4 Minor
Product:
Cisco Nexus 7000 Series Switches
Support Cases:
1164
Known Affected Releases:
(3)
5.2(3a)
5.2(9.51)
6.0(1)
Known Fixed Releases:
(10)
5.2(9.177)S0
5.2(9a)
5.2(9a)S5
6.1(4.97)S0
6.1(5)
6.1(5.32)S0
6.2(1)S8
6.2(1.14)S0
6.2(2)
7.0(0.5)
Download software for Cisco Nexus 7000 Series Switches
Support Cases:
(1164)
Support case links are not customer visible
-->
Related Bugs
Bug(s)
-->
Community Discussion on CSCuc72466 - Cisco Support Community

45 min long session of log file sync waits between 5000 and 20000 ms

45 min long log file sync waits between 5000 and 20000 ms
Encountering a rather unusual performance issue. Once every 4 hours I am seeing a 45 minute long log file sync wait event being reported using Spotlight on Oracle. For the first 30 minutes the event wait is for approx 5000 ms, followed by an increase to around 20000 ms for the next 15 min before rapidly dropping off and normal operation continues for the next 3 hours and 15 minutes before the cycle repeats itself. The issue appears to maintain it's schedule independently of restarting the database. Statspack reports do not show an increase in commits or executions or any new sql running during the time the issue is occuring. We have two production environments both running identicle applications with similar usage and we do not see the issue on the other system. I am leaning towards this being a hardware issue, but the 4 hour interval regardless of load on the database has me baffled. If it were a disk or controller cache issue one would expect to see the interval change with database load.
I cycle my redo logs and archive them just fine with log file switches every 15-20 minutes. Even during this unusally long and high session of log file sync waits I can see that the redo log files are still switching and are being archived.
The redo logs are on a RAID 10, we have 4 redo logs at 1 GB each.
I've run statspack reports on hourly intervals around this event:
Top 5 Wait Events
~~~~~~~~~~~~~~~~~ Wait % Total
Event Waits Time (cs) Wt Time
log file sync 756,729 2,538,034 88.47
db file sequential read 208,851 153,276 5.34
log file parallel write 636,648 129,981 4.53
enqueue 810 21,423 .75
log file sequential read 65,540 14,480 .50
And here is a sample while not encountering the issue:
Top 5 Wait Events
~~~~~~~~~~~~~~~~~ Wait % Total
Event Waits Time (cs) Wt Time
log file sync 953,037 195,513 53.43
log file parallel write 875,783 83,119 22.72
db file sequential read 221,815 63,944 17.48
log file sequential read 98,310 18,848 5.15
db file scattered read 67,584 2,427 .66
Yes I know I am already tight on I/O for my redo even during normal operations yet, my redo and archiving works just fine for 3 hours and 15 minutes (11 to 15 log file switches). These normal switches result in a log file sync wait of about 5000 ms for about 45 seconds while the 1GB redo log is being written and then archived.
I welcome any and all feedback.
Message was edited by:
acyoung1
Message was edited by:
acyoung1

Lee,
log_buffer = 1048576 we use a standard of 1 MB for our buffer cache, we've not altered the setting. It is my understanding that Oracle typically recommends that you not exceed 1MB for the log_buffer, stating that a larger buffer normally does not increase performance.
I would agree that tuning the log_buffer parameter may be a place to consider; however, this issue last for ~45 minutes once every 4 hours regardless of database load. So for 3 hours and 15 minutes during both peak usage and low usage the buffer cache, redo log and archival processes run just fine.
A bit more information from statspack reports:
Here is a sample while the issue is occuring.
Snap Id Snap Time Sessions
Begin Snap: 661 24-Mar-06 12:45:08 87
End Snap: 671 24-Mar-06 13:41:29 87
Elapsed: 56.35 (mins)
Cache Sizes
~~~~~~~~~~~
db_block_buffers: 196608 log_buffer: 1048576
db_block_size: 8192 shared_pool_size: 67108864
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 615,141.44 2,780.83
Logical reads: 13,241.59 59.86
Block changes: 2,255.51 10.20
Physical reads: 144.56 0.65
Physical writes: 61.56 0.28
User calls: 1,318.50 5.96
Parses: 210.25 0.95
Hard parses: 8.31 0.04
Sorts: 16.97 0.08
Logons: 0.14 0.00
Executes: 574.32 2.60
Transactions: 221.21
% Blocks changed per Read: 17.03 Recursive Call %: 26.09
Rollback per transaction %: 0.03 Rows per Sort: 46.87
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.99 Redo NoWait %: 100.00
Buffer Hit %: 98.91 In-memory Sort %: 100.00
Library Hit %: 98.89 Soft Parse %: 96.05
Execute to Parse %: 63.39 Latch Hit %: 99.87
Parse CPU to Parse Elapsd %: 90.05 % Non-Parse CPU: 85.05
Shared Pool Statistics Begin End
Memory Usage %: 89.96 92.20
% SQL with executions>1: 76.39 67.76
% Memory for SQL w/exec>1: 72.53 63.71
Top 5 Wait Events
~~~~~~~~~~~~~~~~~ Wait % Total
Event Waits Time (cs) Wt Time
log file sync 756,729 2,538,034 88.47
db file sequential read 208,851 153,276 5.34
log file parallel write 636,648 129,981 4.53
enqueue 810 21,423 .75
log file sequential read 65,540 14,480 .50
And this is a sample during "normal" operation.
Snap Id Snap Time Sessions
Begin Snap: 671 24-Mar-06 13:41:29 88
End Snap: 681 24-Mar-06 14:42:57 88
Elapsed: 61.47 (mins)
Cache Sizes
~~~~~~~~~~~
db_block_buffers: 196608 log_buffer: 1048576
db_block_size: 8192 shared_pool_size: 67108864
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 716,776.44 2,787.81
Logical reads: 13,154.06 51.16
Block changes: 2,627.16 10.22
Physical reads: 129.47 0.50
Physical writes: 67.97 0.26
User calls: 1,493.74 5.81
Parses: 243.45 0.95
Hard parses: 9.23 0.04
Sorts: 18.27 0.07
Logons: 0.16 0.00
Executes: 664.05 2.58
Transactions: 257.11
% Blocks changed per Read: 19.97 Recursive Call %: 25.87
Rollback per transaction %: 0.02 Rows per Sort: 46.85
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.99 Redo NoWait %: 100.00
Buffer Hit %: 99.02 In-memory Sort %: 100.00
Library Hit %: 98.95 Soft Parse %: 96.21
Execute to Parse %: 63.34 Latch Hit %: 99.90
Parse CPU to Parse Elapsd %: 96.60 % Non-Parse CPU: 84.06
Shared Pool Statistics Begin End
Memory Usage %: 92.20 88.73
% SQL with executions>1: 67.76 75.40
% Memory for SQL w/exec>1: 63.71 68.28
Top 5 Wait Events
~~~~~~~~~~~~~~~~~ Wait % Total
Event Waits Time (cs) Wt Time
log file sync 953,037 195,513 53.43
log file parallel write 875,783 83,119 22.72
db file sequential read 221,815 63,944 17.48
log file sequential read 98,310 18,848 5.15
db file scattered read 67,584 2,427 .66

Syncing styles between Word and RH HTML 7

Question about syncing styles between Word and RH HTML 7.The
printed Word format has Hdr/Ftr, TOC, Title Page stuff.
I understood that, when importing a Word .docx, RH creates
books for Heading 1s and Topic headings are Heading 2. That is why
both Word and RH templates use the same paragraph style names
(though the format in Word/print differs from that in RH/online).
I imported my Word file into a new RH HTML 7 project. The TOC
has the expected books/topics/subtopics. I imported the .css and
the .htt from the RH 5 template project. I selected all 160 topics
in the Topic List pod and applied the corporate .htt template
(Topic Properties > General) AND (to be certain), the corporate
.css stylesheet (Topic Properties . Appearance).
This project doesn't have the same characteristics as the
base/master from RH 5 that uses those same format files. I even
imported the same skin. I get the banner, but not the styles.
All the topic headings in the RH 7 project (were transformed
to) are Heading 1 styles, even though they were Heading 2s in Word.
(this breaks with my tribal knowledge of how RH imports
Books/Topics from a Word doc). The heading colors (navy blue, royal
blue, etc.) have taken on their own definitions--dunno where from,
tho.
Since I'm OCD about creating and using one style for each
type of paragraph (procedurehead, syntax, procnum, procnonum, note,
bullist) in Word or in RH, Peter Grainger's suggestion to "clean
up" styles before importing shouldn't apply.
RH instructions omit any detail about what to specifiy in the
Conversion Options and Split On Style. I took a couple of swipes at
the SOS--OK, split on Heading 1, Heading 2, Heading 3. So I get
Books for Heading 1, separate topics for Heading 2 and Heading 3,
but the "topic titles" have become Heading 1 in name but not in
format. In fact, the format doesn't match anything I've specified
in Word or RH. I thought by "attaching" the .htt and the .css to
each topic (select all topics, , I'd have the look and feel I
specified in my corporate RH(5) template. The banner imported, the
navigation pane and icons imported. What happened to the styles?
Here's the missing link that someone may need to explain
(explicitly in Help somewhere). When I open the .htt template
(sample topic) that I imported from RH 5, the topic title shows as
Document > Heading 2 > in the Design view. The HTML view
labels this paragraph as h2:
<!doctype HTML public "-//W3C//DTD HTML 4.0
Frameset//EN">
<html><head>
<meta http-equiv=content-type content="text/html;
charset=utf-8">
<meta name=generator content="Adobe RoboHelp -
www.adobe.com">
<meta name=generator-major-version content=0.1>
<meta name=generator-minor-version content=1>
<meta name=filetype content=RoboHelp>
<meta name=filetype-version content=1>
<meta name=page-count content=1>
<meta name=layout-height content=1927>
<meta name=layout-width content=732>
<title>JavaCode</title>
<link rel=StyleSheet href=mytemplate.css>
</head>
<body>
<h2>NameOfPackage: NameOfMethod</h2>

Hi Jim,
Don't know how useful my question is now, given that you posted over a year ago.
Do your RH X5 Word source docs use styles? If so, take a look here, and I detail how I have been able to import from RH X5 for Word to RH 7 HTML. (I'm currently still working on a leftover issue with Keywords and Subkeywords.)
One thing I have done which probably helped: while applying new standards to our documentation, we have removed almost all images (screen shots, etc.), and have only retained those images which don't have a text equivalent. The drastically reduced the import file size of my Word source docs. All my images were referenced via TrueCode, but upon importing to RH 7 HTML, there was so much less to be processed by RH 7 HTML, that the import went much more easily and quickly.
I hope this helps,
Marjorie

My podcasts will not sync (icloud) between PC and iphone 4s and ipad 2

My podcasts will not sync (icloud) between PC and iphone 4s and ipad 2. Any help would be greatly appreciated.

Make sure you are using ios 6.1 or later not 6.0.1 (or older). Your iTunes Notes setting for iPad and iPhone in iCloud. Also Notes setting in both devices are in iCloud.
My New iPad using 6.1 and iPhone 4S using 6.1.2. No problem sync Notes on both devices.
I hope this can help.

Is it possible to sync numbers between iPad and iPhone and mac

Is it possible to sync Numbers between iPhone and iPad and IMac. I work in a school and want to keep test scores for my class in the one place without having to manually update the spreadsheets each time I enter scores.
Thanks in advance
Conor

Yes, Numbers syncs (very well) via iCloud. You need to activate Numbers iCloud sync on all of your devices.
On the Mac, go to System Preferences > iCloud and make sure Documents & Data is checked. Also click the Options... button next to Documents & Data and check Numbers.app.
On each iOS device, go to Settings > iCloud > Documents & Data > and turn on Numbers. Also go to Settings > Numbers and turn on Use iCloud.
After you've got things working, it's best to close down the Numbers document on one device before you use it on another.
SG

HOW TO SYNC PLAYLIST BETWEEN IPAD AND IPHONE?

HOW TO SYNC PLAYLIST BETWEEN IPAD AND IPHONE?

You cannot sync a playlist directly from one device to another with using iTunes on your computer or using iTunes Match.
https://www.apple.com/lae/itunes/itunes-match/

Configure active and standby mac address in failover

Hi guys,
I just have a doubt that, if I configure the active and standby mac address in failover, does it will cause any downtime?
As I planning to configure the active and standby mac addresses in failover during production time and not wish that it will bring any downtime to me.
Besides that, just need some guideline that do I need to put all the interfaces' mac addresses in failover?
failover mac address GigabitEthernet0/0 0022.90fe.2000 0022.90fe.2001
failover mac address GigabitEthernet0/1 0022.90fe.3000 0022.90fe.3001
failover mac address GigabitEthernet0/2 0022.90fe.4000 0022.90fe.4001
failover mac address GigabitEthernet0/3 0022.90fe.5000 0022.90fe.5001

Hi Marius,
Seem like set the failover MAC address was not working for me.
Last friday I was tested the failover MAC address.
TEST 1
1, Power off primary ASA and secondary ASA work as active.
2, 2821 router able to learn the correct arp entries.
TEST 2
1, Power on primary ASA and failover from secondary to primary.
2, 2821 router able to learn the correct arp entries from ASA.
3, Set failover MAC address, power off primary ASA and secondary ASA be active.
4, 2821 router unable to learn the correct arp entries.
TEST 3
1, Removed failover MAC address from secondary ASA.
2, 2821 router still unable to learn the correct arp entries from ASA.
3, Power up primary ASA and secondary ASA still in active.
4, 2821 router still unable to learn the correct arp entries from ASA.
5, Reboot 2821 router and it able to learn the arp entries from ASA.
I am not sure this issue from router or from the ASA. But I guess I will try to upgrade the router in term of software and hardware.

How to sync iBooks between Mac and iPhone? I'm on Mavericks and iOS 7

I'm on Mavericks and iOS 7, but my iBook on Mac is different from my iPhone 5.
Does anyone know how to sync iBooks between Mac and iPhone?
This issue has been puzzled me for a while, hope can find a way out here, many thanks~

Under iTunes / File / Devices ?
But I did not see my iPhone under this section...
Only see those 4 options:
Sync "my iPhone"
Transfer Purchases from "my iPhone"
Back Up
Restore from Backup
Could you describe a bit more precise?
Many thanks~

How to sync bookmarks between Mac and iPhone without iCloud

How to sync bookmarks between Mac and iPhone without iCloud?
I bought a new iPhone and i would like to copy my Safari's bookmarks from my iMac (OS X 10.10.3) to my new iPhone (iOS 8.3).
How to do this, without iCloud?

You might be able to use Google Calendar to do what you want. Set up a Google account on the web, set up the MacBook to access the Google account, including calendar, then set up the iPhone the same way. While I'm using MAvericks, I am also using Google to manage my calendar, since I don't particularly *like* iCloud... And I came from Android to iPhone, but I haven't like iCloud since it was called MobileMe.
Oh, and as for sync to iTunes, can't you just use a direct conenction to the computer (either WiFi or cable) to keep the music in control?

Syncing photos between ios and Mac

Hi
How to sync photos between Mac and ios .. iPhoto is confusing .. If I create an album on Mac and share it to ios
Through iTunes I won't be able to add or delete photos to it with ios which is strange .. If I use photo stream album
Created on ios I won't be able to add photos for them with my Mac so how to do such a simple task with iPhoto ?

Not sure what you're asking here. The only connection between iphoto for mac and iPhoto for iOS is a name. Other than that they have nothing in common. So, no you can't manage albums created on your Mac with iPhoto for iOS and vice versa.
iPhoto Menu -> Provide iPhoto Feedback
For feature requests.

I followed Winston Chruchel's instructions to sync notes between iPhone and iPad. iPhone syncs to iPad but iPad doesn't synch to iPhone"

I followed Winston Chruchel's instructions to sync notes between iPhone and iPad. iPhone syncs to iPad but iPad doesn't synch to iPhone"

I would ask these guys.
https://games.gree-support.net/forums
I was unable to find anything in their FAQs, so submitting support ticket may be best.

Sync config between active and standby CSM

Similar Messages

Maybe you are looking for