Sync doesn't work after re-install

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1015872 /questions/1015872]''
I had sync working on my windows machine, and firefox was always up to date.
After re-installing windows I connected to my Sync straight away account and nothing is updating, no bookmarks, history, passwords, nothing.
No, I haven't upgraded to a new sync or old sync or anything like that, i didn't even know there were different ones. How do I get my data back and sync working again?

Sync isn't meant to be used as a backup device, but merely to sync data between multiple devices.
So it is not guaranteed that you can restore data from the Sync server.
See also:
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/kb/Backing+up+your+information

Similar Messages

  • C7 sync doesn't work after Anna update

    I normally sync the agenda between outlook 2003 and C7 with Ovi-suite.
    After update to symbian Anna it doesn't work.
    Strange is that Ovi suite gives the number of events that did not sync.
    So he can recognize them, but can't sync.
    Any solutions?
    Thanks!
    Pietth

    I have the same problem in C6-01 after Anna Update, there are another two posts around here with other people with the same issue, an, believe it or not, no answer from Nokia
    My problem also affects Ovi Maps favourites. I just could update them once since Anna Update, and now that is failed too

  • AirPort doesn't work after Leopard install

    I have an iMac 20" 2GHz Core 2 Duo and my AirPort doesn't work. I reset my PRAM, erased the hard drive and installed a clean copy of Leopard after picking it up from the Retail store. I had exactly the same problem with 9A559 and the seed update and I ASSUMED it would be fixed by the time the final release is out. It doesn't detect any networks, even if i move the access point very close to the computer. I tried disabling all security on the access point. Tried changing channels. Tried resetting the access point to defaults and reconfiguring from scratch. Tried manually putting the SSID in on the iMac but none of it worked. The access point is a Linksys WAG54G with the latest firmware. If anyone can help me, please do because the AirPort is the ONLY way this computer can access the internet.

    Just to clarify my situation:
    Erase and install of Leopard
    Airport card is detected:
    Wireless Card Type: AirPort Extreme (0x14E4, 0x89)
    Wireless Card Locale: Worldwide
    Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.25.10)
    Current Wireless Network: wireless network not available
    No networks are available for selection, (i can normally see 4 or 5)
    System.log has:
    Oct 27 00:07:04 my-names-imac SystemUIServer95: Error: Apple80211Scan() error 16
    Oct 27 00:07:04 my-names-imac SystemUIServer95: Error: __performScan() failed, entering fail-save workaround..
    Oct 27 00:07:07 my-names-imac SystemUIServer95: Error: Apple80211Scan() error -6
    Oct 27 00:07:07 my-names-imac SystemUIServer95: Error: __performScan() failed (-6)
    Oct 27 00:07:14 my-names-imac SystemUIServer95: Error: Apple80211Scan() error -6
    I'm about two feet from my wireless router, none of the other (Tiger) computers have issues connecting to it.
    Anyone else see the Apple80211Scan entries?

  • Demo servlet IsItWorking doesn't work after fresh install

    Hello,
    We did a fresh install of Oracle 9iAS 1.0.2.2 on Hp-ux 11i
    The installation completed succesfully, but
    when trying to run the demo servlet IsItWorking, we get error 'The page cannot
    be displayed'
    The apache error_log file contains following lines:
    [Thu Apr 18 17:12:03 2002] [notice] FastCGI: process manager initialized (pid
    9809)
    [Thu Apr 18 17:12:03 2002] [warn] OPM: ADM: process 9810 created server process
    9811 (group group1, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:03 2002] [emerg] OPM: Watcher starts with an id=9810
    [Thu Apr 18 17:12:03 2002] [warn] OPM: ADM: process 9810 created server process
    9812 (group group2, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:04 2002] [notice] Oracle HTTP Server Powered by Apache/1.3.19
    (Unix) mod_fastcgi/2.2.10 mod_perl/1.25 mod_oprocmgr/1.0 configured -- resuming
    normal operations
    [Thu Apr 18 17:12:18 2002] [warn] OPM: EW process rp5400:0 (pid:9811) died,
    restarting.
    [Thu Apr 18 17:12:18 2002] [warn] OPM: ADM: process 9810 created server process
    9819 (group group1, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:18 2002] [warn] OPM: EW process rp5400:0 (pid:9812) died,
    restarting.
    [Thu Apr 18 17:12:18 2002] [warn] OPM: ADM: process 9810 created server process
    9820 (group group2, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:21 2002] [warn] OPM: EW process rp5400:0 (pid:9819) died,
    restarting.
    [Thu Apr 18 17:12:21 2002] [warn] OPM: ADM: process 9810 created server process
    9821 (group group1, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:21 2002] [warn] OPM: EW process rp5400:0 (pid:9820) died,
    restarting.
    [Thu Apr 18 17:12:21 2002] [warn] OPM: ADM: process 9810 created server process
    9822 (group group2, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:23 2002] [error] OPM:Can not find one alive process
    [Thu Apr 18 17:12:23 2002] [error] OPM:Can not find one alive process
    [Thu Apr 18 17:12:24 2002] [warn] OPM: EW process rp5400:0 (pid:9821) died,
    restarting.
    [Thu Apr 18 17:12:24 2002] [warn] OPM: ADM: process 9810 created server process
    9824 (group group1, module JServ), and inserted in proctable as entry 0
    Any idea?
    Thanks

    Hi -
    I was wondering if you solved this problem. I had the exact same issue on Win2K after I installed the Java Portlet Development Kit. Now my Apache JServ does not work.
    This is a sample of my error_log:
    [Fri Jun 07 10:48:01 2002] [notice] FastCGI: process manager initialized
    [Fri Jun 07 10:48:08 2002] [error] OPM:Can not find one alive process
    [Fri Jun 07 10:48:08 2002] [error] [client 127.0.0.1] File does not exist: /servlet/IsItWorking
    [Fri Jun 07 10:51:22 2002] [warn] OPM: ADM: Process 380 terminated using SIGTERM successfully
    I have re-checked my jserv.properties, jserv.conf, zone.properties several times and I can't see the problem. I tried to manually remove the entire PDK and go back to my original state (I saved a copy of all my config files) but it still doesn't work.
    Did you find a way to fix this?
    Thanks!!!
    Heather

  • Touch doesn't work after clean install of Windows 7 Professional

    I have an IQ526t.  I did a clean  install (remove drive/repartition/format drive) of Windows 7 Professional, and now the touchscreen feature doesn't work.  I've been on forums here and at Mirosoft, downloaded various drivers, rebooted multiple times, etc....no luck.  I get the sound, but no response.   Thoughts???

    Hello bmarkj,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you have removed the recovery drive and installed Windows 7 by not using the OEM version that came with your computer. You have a couple options here, first you can download and install the HP Support Assistant and let it download and install the software and drivers that came with your computer. You can alter the settings so that the updates are manually done giving you control over what gets updated and what does not. Or you can download and install the drivers and what software you want from HP TouchSmart IQ526t CTO Desktop PC Drivers page. The choice is yours.
    ***NOTE: Be warned that there is software that come with some of the computers that is ONLY available from the recovery drive so you may not see everything you are used to seeing. The only way of recoverying this software is through the HP Recovery Discs.
    I hope I have addressed your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • The 7 key doesn't work after lion install

    The 7 key on my MacBook pro keyboard doesn't work following lion installation. (I'm using my iPad right now obviously!)
    When I press 7, basically random stuff will come out. A set of 3 to 5 random numbers or some "command" that whatever program I am in doesn't recognize. 
    I tried rebooting. I have no idea where to even begin, help!

    And of course this morning all keys are back to working again! But last night it was 7, J, U gibberish.
    At first glance it does seem like something that might be a hardware problem, but I am deeply suspicious of coincidences like this. I'm kind of like house md that way I guess.  Especially when at least two of us experienced this.
    I think I will also wait for the next software update and see if that helps.  At least I have my iPad to use when the keys are on the fritz.
    Good luck!

  • Safari doesn't work after Yosemite install

    I've recently installed Yosemite in my iMac*. Everything works as supposed except for Safari. Every time the computer wakes from sleep Safari does NOT work at all. It doesn't load any site. The only solution so far is to restart the iMac.
    any clues?
    * 27-inch, Late 2009, 2.66 GHz Intel Core i5, 16 GB 1067 MHz DDR3

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Auto Login Doesn't Work After Re-Install

    Visited bad link within Facebook! Thereafter, forced to re-install Firefox -- from scratch!! Saved a few of the profile files like bookmarks, passwords, but no extension stuff. Re-installed FireFox after deleting ALL tracks I could find in Program Files, Program Files (x86), and Windows 7 Pro profile.
    On visiting a page requiring login, Firefox populates the userid & password properly. BUT, it doesn't start the login. Formerly, this was essentially a background process and not really visible to me. Now, we stop at the page demanding credentials and click the "login" button.
    I have "IE VIEW", "NOSCRIPT", and "ADBLOCK PLUS". ALL of my plugins are in "Ask to Activate" mode.
    I have enabled extensions: "ADOBE ACROBAT - Create PDF 1.2" and "Trend Micro NSC FireFox Extension 5.82.0.1056".
    I'd surely like to get FireFox to working as it previously did. I just don't know where to look/tweak!
    Thanks,
    WLPeavy

    Details like websites remembering you (log you in automatically) are stored in a cookie.
    *Create a cookie 'allow' exception to keep such cookies, especially in case of secure websites and when cookies expire when Firefox is closed.
    *Tools > Options > Privacy > "Use custom settings for history" > Cookies: Exceptions
    In case you are using "Clear history when Firefox closes":
    *do not clear the Cookies
    *do not clear the Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/remove-browsing-search-and-download-history
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
    Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception that you would like to keep.
    If clearing cookies didn't help then it is possible that the cookies.sqlite file that stores the cookies got corrupted.
    *Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookies files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted.
    *http://kb.mozillazine.org/Cookies
    *https://support.mozilla.org/kb/Deleting+cookies

  • Pacman doesn't work after fresh install

    Hi everyone, I just installed archlinux on my very old 400Mhz Dell Latitude, but now pacman won't do anything, I can't sync, I can't install anything, ... The install did have some issues, but I'm not sure if that is causing this
    The output from 'pacman -Sy'
    :: Synchronizing package databases...
    error: failed to synchronize core:
    error: failed to synchronize extra:
    error: failed to synchronize commutity:
    error: failed to synchronize any databases
    The pacman log doesn't say anything interesting, the configs look okay. That output is spit out rather quickly too, I'm not sure if it's even trying to use the internet (which is working)
    Can you help me?
    Last edited by Zuliani (2008-04-16 05:43:26)

    error: failed to synchronize core:
    error: failed to synchronize extra:
    error: failed to synchronize community:
    error: failed to synchronize any databases
    debug: config: attempting to read file /etc/pacman.conf
    debug: config: new section 'options'
    debug: config: HoldPkg: pacman
    debug: config: HoldPkg: glibc
    debug: config: new section 'core'
    debug: setlibpaths() called
    debug: option 'cachedir' = /var/cache/pacman/pkg/
    debug: registering sync database 'core'
    debug: opening database 'core'
    debug: opening database from path '/var/lib/pacman/sync/core/'
    debug: config: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server to database 'core': protocol 'ftp', server 'locke.suu.edu', path '/linux/dist/archlinux/core/os/i686'
    debug: adding new server to database 'core': protocol 'ftp', server 'ftp.belnet.be', path '/mirror/archlinux.org/core/os/i686'
    debug: serverlist flushed for 'core'
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'extra'
    debug: registering sync database 'extra'
    debug: opening database 'extra'
    debug: opening database from path '/var/lib/pacman/sync/extra/'
    debug: config: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server to database 'extra': protocol 'ftp', server 'locke.suu.edu', path '/linux/dist/archlinux/extra/os/i686'
    debug: adding new server to database 'extra': protocol 'ftp', server 'ftp.belnet.be', path '/mirror/archlinux.org/extra/os/i686'
    debug: serverlist flushed for 'extra'
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'community'
    debug: registering sync database 'community'
    debug: opening database 'community'
    debug: opening database from path '/var/lib/pacman/sync/community/'
    debug: config: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server to database 'community': protocol 'ftp', server 'locke.suu.edu', path '/linux/dist/archlinux/community/os/i686'
    debug: adding new server to database 'community': protocol 'ftp', server 'ftp.belnet.be', path '/mirror/archlinux.org/community/os/i686'
    debug: serverlist flushed for 'community'
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: finished parsing /etc/pacman.conf
    debug: registering local database
    debug: opening database 'local'
    debug: opening database from path '/var/lib/pacman/local/'
    :: Synchronizing package databases...
    debug: failed to get lastupdate time for core
    debug: failed to sync db: [0]
    debug: returning error 51 from alpm_db_update : unexpected error
    debug: failed to get lastupdate time for extra
    debug: failed to sync db: [0]
    debug: returning error 51 from alpm_db_update : unexpected error
    debug: failed to get lastupdate time for community
    debug: failed to sync db: [0]
    debug: returning error 51 from alpm_db_update : unexpected error
    debug: closing database 'local'
    debug: unregistering database 'local'
    debug: closing database 'core'
    debug: unregistering database 'core'
    debug: closing database 'extra'
    debug: unregistering database 'extra'
    debug: closing database 'community'
    debug: unregistering database 'community'
    Looks like my databases aren't good, how do I fix this?

  • Sound on OS X doesn't work after Soundflower install

    Because of missing native equalizer on OS-X (Snow Leopard) I had to use third party app Soundflower in combination with AU Lab. Everything was going right, but once I restarted OS X, the sound stopped working. When I changed the volume by the keys on Macbook I hear the system sound, but in iTunes, Vimeo, some videos on YouTube, Quicktime, etc., I hear nothing.
    I tried to remove Soundflower and AU Lab and reboot, but without any change.
    After next OS X restart iTunes works right - I hear the sound. On some videos on YouTube sounds works too, but not on all videos. Vimeo videos still without sound.
    Does anybody know how to fix this problem?

    I tried to remove Soundflower and AU Lab and reboot, but without any change.
    Did you also remove the plist files of those files from your Home Preferences folder?  And restart afterwards? 
    Repair permissions & restart. 
    http://support.apple.com/kb/TS1574> Troubleshooting issues with no audio from built-in speakers on Macs
    Open up GarageBand if installed then, open a program (optional).
    Quit out of the GarageBand app.

  • Airport doesn't work after RAM install

    I upgraded RAM on my Mac Mini. Followed directions and all is good. Mini with new RAM is running great; however now, my Airport doesn't see my or any neighborhood networks. Prior to the install this was all working fine.
    I can' figure out the problem. Any suggestions on what to do?

    Excellent! That was it. Thank you.
    And notes from a novice: For those looking to upgrade RAM in the Mac mini (Intel) there are 3 things to note when pulling out the internal frame: 1. The little black (thermostat fan) cable up front. You must unhook but if you forget to reconnect the fan runs all the time. Not good; 2. The gold (audio) band in the back. This too came off very easily. Very small (plastic) clamp that was tedioius to set back. Lift internal frame and turn like a book page; and 3. the airport cable. There are 2 small circular (beige color) ports. Use the MAIN (it's in tiny print) near the back.

  • CS4 doesn't work after re-install MacBook Pro

    Hello,
    today i re-installed my MacBook Pro, after making a backup of all my programs via TimeMachine. After the re-installation i put all my programs back, but CS4 won't work anymore… I get the error code 150:30.
    I tried to find and throw away the netflex-folder in the Library, but it's not in the library at all. I tried other steps on the Adobe-site as well, but nothng works.
    I have a icensed product, but the install-disc are at my house in Holland and i am living in Rabat at the moment.
    What to do?

    ohhhhhhhh i thought u meant when you stand by your laptop it disconnects like your body was interfering with the signal lol.
hmmmm. thats an odd one. sometimes computers of any kind have what i call "idiot moments" where they forget how to do something simple (like reconnect to the internet)
    maybe try reconnecting your macbook pro to your internet starting from scratch that  may solve it

  • Changing file associations doesn't work after CS4 install

    I am running into an issue on any machine I install CS4 on in which I would like (for the time being) to keep CS2 or CS3 on whereby the Open with in get info always defaults to the particular CS4 app, no matter if I set it to CS2/CS3 and hit change all. You can do an individual file and set the .indd file to open in ID CS2, but if you try to force a change all to default any .indd file to open with ID CS2, it reverts automatically back to ID CS4.
    I have tried this on various workstations with differing OS's, Tiger, Leopard, and all yield the same result. It is like no matter what you do all the CS4 apps have precedence for whatever reason and cannot be universally overridden. Any ideas or others that have run into this?
    I have use Onyx to clean up the Launchservice databases and to clean up associations, have thrown out some plists, etc. and nothing is working.
    Any help would be appreciated.
    Brian

    Thanks, Bob. I will take a look at, but it might not be exactly what I was hoping for as I was hoping to avoid the user from having to drag files onto something just to open them up.
    Any ideas why CS4 overrides the ability to globally set the Open with to CS2 or CS3 but you still can on just one document?
    Odd behavior.
    Brian

  • ITunes doesn't work after I installed it for my new iPod video

    Hi,
    This is my problem:
    When I connect my iPod video to my computer( windowsXP) iTunes doesn't open up. If I start iTunes manually it's says this error:(normally in dutch) The needed software for communication with iPod isn't installed properly. Plz install again, so the software on iPod can be installed.
    So I reinstall iTunes, but this error still shows up.+ When I check on ITunes in one of the menus, it says: no iPod connected, but my iPod is connected to my computer.
    Can anyone find an explanation for this?

    http://docs.info.apple.com/article.html?artnum=93716

  • Quicktime doesn't work after Itunes install

    After installing Itunes 7.0.2, I suddenly can't view Quicktime files. I had Quicktime installed before, but obviously it was overwritten when I installed Itunes. Now, when I attempt to view any .mov files, the audio is played, but the video is a scrambled picture of garbage.
    Any thoughts?
    Peter Brown
    Waterloo, Ontario

    Down load and install quicktime by itself. That should correct the issue.
    http://www.apple.com/quicktime/download

Maybe you are looking for

  • Delivery and Goods Issue

    Hi,   I am new to SAP and was trying to do a Goods Issue after creating a delivery. When i click on Goods Issue from the delivery document, I get the message " Storage Location not defined for delivery item 000010" When I try to go to picking overvie

  • Logon Error:Could not retrieve the source file for Port "Main"

    Hi All, We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder "Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main". Any help greatl

  • LSMW (SAP-ABAP)

    Hi,     i m wroking on lsmw but no idea abt where i sd write code for particular field. can anyone tell me the solution for it ??? Thx and Regds, bobby

  • How to install OWAS 3.0.2 on Linux

    Hi All, I tried to install OWAS 3.0.2 on Linux, but I can connect to remote database. I used my standard SQL*NET files which work good on other sites clients & servers If possible provide me with step by step instruction for configuring SQL*NET OWAS

  • 5002 Error When Purchasing Song/Album

    Everytime I attempt to purchase the album Find Me - Christina Grimmie, I receive this error: Item is Temporarily Unavaliable Try Again Later And when I try to purchase an individual song, it gives me this error: Unknown Error 5002 has occured. Those