Sync error message about mail client - using Outlook Express, wants Outlook

I keep getting a message that "Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client"
Outlook Express IS set as my default mail client, both on my computer and on the iTunes screen.
I use Calendar on the iPhone, but do not have sync requested on iTunes for this function.
I do have Outlook on my computer, but do not use it (don't need calendar function at home, but do like to have it on my iPhone since I carry it with me)

I'm having a similar problem. "Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Office Outlook and set it as the default mail client." (iTunes 7.6.1.9)
I sync my contacts with Yahoo! (not Outlook).
I was syncing my calendar with Outlook. This was working just fine, but when I started to get the error above, I have tried turning off the calendar sync. No help there.
I am not syncing any email accounts via iTunes.
Anyone have any suggestions? Given that I'm not syncing with Outlook I don't understand the error. Thunderbird is my default mail client and I shouldn't have to change the system defaults to work around this bug.

Similar Messages

  • TS4002 Can you tell me if the smtp settings have changed recently?  I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working.  Error message is: Authentication failed because Outlook doesn't support any of the

    I am able to receive messages on my IMac using Outlook but am unable to send.  I've had no trouble in the past but began receiving the following messages today.
    5.7.8 Bad username or password (Authentication failed).
    Authentication failed because Outlook doesn't support any of the available authentication methods.
    I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues.  Any advice?

    Here are the correct settings. They have never changed since iCloud debuted a year ago.
    Server information
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    SMTP (outgoing mail server) information:
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud. 

  • I updated iTunes from the update message and now my Windows computer (at work- I use Mac at home) keeps sending me error messages about MobileMe and iTunes. It indicates a .dll error but I can't find any such file. I tried removing the entire ITunes app.

    I downloaded an update to my iTunes app on my work Windows computer and now I am constantly getting error messages about MobileMe, when I download a webpage and marked slowness of my Outlook application. I tried removing iTunes and reloading directly from the Apple site, but no change. One of my peers is having the same issue and messages.
    Any suggestions?

    See note 2 in Troubleshooting issues with iTunes for Windows updates for starters...
    tt2

  • Help! I restored my iphone recently and put all my music back onto my phone that day and it was fine but last night i was putting someother music on got an error music on. I got an error message about not being able to sync and now ALL my music has GONE.

    ahh! .I restored my iphone recently and put all my music back onto my phone that day and it was fine but last night i was putting someother music on got an error music on. I got an error message about not being able to sync and now ALL my music has GONE. deos anyone know why this would have happened?

    Click: Restoring your iTunes Library backup (from an external drive) here >  iTunes: Back up your iTunes library by copying to an external hard drive
    BTW, if you are a resident of the U.S, have iTunes 10.3 or later, and iOS 4.3.3, you can re download your iTunes purchases for free.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have been using CS6 for two years without incident.  Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help

    I have been using CS6 for two years without incident.  Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help?

    Hi Mylenium,
    Thanks for your response.
    Here is the error information showing up:
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: Adobe Media Encoder.exe
      Application Version: 6.0.0.382
      Application Timestamp: 4f62fcf1
      Fault Module Name: WatchFolder.dll
      Fault Module Version: 6.0.0.382
      Fault Module Timestamp: 4f62f37f
      Exception Code: c0000005
      Exception Offset: 0000000000007899
      OS Version: 6.1.7601.2.1.0.768.3
      Locale ID: 4105
      Additional Information 1: 9a62
      Additional Information 2: 9a620826d8ae4a2fa8b984b39290a503
      Additional Information 3: 1fb3
      Additional Information 4: 1fb304eee594288faeefbf1271b70d37
    I am using a PC Windows 7

  • I want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.

    Hi
    i want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.

    Hello there ypda75,
    I have an article here that has a list of settings to get from your Email provider so you can make sure that the settings are correct. It has troubleshooting steps to try as well. Also I would recommend restarting the router, and/or testing a differnet network.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/ts3899.
    If you are unable to send or receive email, try the following steps:
    Restart the iOS device.
    Tap Safari and attempt to load a webpage to ensure that the device has Internet access. If you're unable to load a webpage, try the Wi-Fi assistant.
    Try an alternative Internet connection.
    If your email is provided by your Internet provider, try connecting from the home network.
    If your iOS device has an active cellular data plan, try to disable Wi-Fi:  Tap Settings > Wi-Fi and turn off Wi-Fi.
    If not, try a different Wi-Fi network.
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
    If you're still unable to send or receive email, contact your email provider and verify the account settings are correct. You will need to gather this information (PDF).
    All the very best,
    Sterling

  • Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself.  Once in awhile i get an error message about unknown error 1.  If i look at the diagnosis or if runs on itunes i get the following i

    Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself.  Once in awhile i get an error message about unknown error 1.  If i look at the diagnosis or if runs on itunes i get the following.  When I called the support at AT&T they think the phone is shot and it is a hardware thing but i have a hard time believing that when it happened when I sync'd it to my computer.  It did get progressively worse though, at first it crashed not that often and then got worse.  So restores are failing, recovery, everything.  Anyone run into this? 
    11-11-16 18:20:36.319 [2232:16dc]: amai: tss_submit_job: HttpQueryInfo returned 200
    2011-11-16 18:20:38.350 [2232:1c50]: <DFU Device 0F128BE0>: production fused device
    2011-11-16 18:20:38.350 [2232:1c50]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:20:38.350 [2232:1c50]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#1bfe4c4c
    2011-11-16 18:20:39.132 [2232:1c50]: WinDFU::UploadData: EOF, cbRead: 553
    2011-11-16 18:20:39.147 [2232:1c50]: WinDFU::UploadData: ZLP
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ResetDevice: resetting...
    2011-11-16 18:21:02.210 [2232:1c50]: WinDFU::FinalizeDfuUpdate: success
    2011-11-16 18:21:03.491 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:03.507 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 18:21:03.757 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:04.554 [2232:1b88]: amai: tss_submit_job: HttpQueryInfo returned 200
    2011-11-16 18:21:10.882 [2232:1b88]: <DFU Device 0F198478>: production fused device
    2011-11-16 18:21:10.882 [2232:1b88]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:21:10.882 [2232:1b88]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#cfe11997
    2011-11-16 18:21:12.788 [2232:1b88]: WinDFU::UploadData: EOF, cbRead: 1321
    2011-11-16 18:21:12.804 [2232:1b88]: WinDFU::UploadData: ZLP
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ResetDevice: resetting...
    2011-11-16 18:21:20.866 [2232:1b88]: WinDFU::FinalizeDfuUpdate: success
    2011-11-16 18:21:21.835 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:21.835 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 18:21:21.897 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
    2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: pipe stall
    2011-11-16 18:21:22.054 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
    2011-11-16 18:21:22.054 [2232:1838]: command device request for 'getenv radio-error' failed: 2008
    2011-11-16 18:21:22.054 [2232:1838]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:21:22.054 [2232:1838]: <Recovery Mode Device 0F2A7768>: production fused device
    2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
    2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: pipe stall
    2011-11-16 18:21:24.007 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
    2011-11-16 18:21:24.007 [2232:1838]: command device request for 'getenv ramdisk-delay' failed: 2008
    2011-11-16 18:21:38.319 [2232:1344]: fixed TcpWindowSize (64512) can cause restore failure if too large
    2011-11-16 18:21:38.335 [2232:1344]: unable to open device_map.txt: No such file or directory
    2011-11-16 19:21:54.475 [2232:1344]: amai: AMAuthInstallBasebandHandleUpdaterStatus: outputDict is NULL
    2011-11-16 19:21:54.538 [2232:1344]: <Restore Device 0ED73918>: Restore failed (result = 1)
    2011-11-16 19:21:54.647 [2232:8ec]: iTunes: Restore error 1
    2011-11-16 19:22:09.100 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:22:09.100 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:22:09.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:37:25.319 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:37:25.335 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:37:25.382 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:52:41.679 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:52:41.679 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:52:42.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    I also get a system crash reporter key of c392e98c929aa0b351037af00d75d08aeadc843c    bug type 110
    incident identifier  8ff84a87

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • Error Message re: Mail Version with OSX Version & Mail Won't Open

    I have not upgraded my OS and have been with 10.6.8 (on iMac Intel 3.06 GHz) since it came out without any issues.  However today, after using sofware update to install: Java for Mac OSX 10.6 Update 10 and Security Update 2012-004 (which I can't see how they would relate), I went to open Mail and got the following error message:
    You can't use this version of Mail with this versio of Mac OS X
    You tried to open Mail version 4.5 (1084/1085) in : /Applications/Internet/Mail.app (which is where I have had it forever)
    it can't be used on this version of Mac OS X. Try opening the version of Mail located in the Applications for on your computer. For more information, click the Help button (which it stated upon clicking that it could not be accessed).
    Also, though I don't think this could be related - for about a month now, iTunes keeps asking me to enter my password (apparently not recognizing that i never logged out) - however if I just dismiss the request 2-3 times I can look in the menu and the log out option is available - weird.
    I see others have intermittently had this problem and as I said I have not added or upgraded any software and I am not using iCloud. I performed disk repair and permissions, cache cleaning, corrupt preference files etc, using Applejack but it did not resolve the issue.  Any help would be greatly appreciated - while I can get to my mail through other avenues it's not nearly as convenient. Thanks.

    Resolved. Found another thread - had to move my Mail App back into the Applications folder and then re-apply Security update.

  • Error message when importing data using Import and export wizard

    Getting below error message when importing data using IMPORT and EXPORT WIZARD
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    <dir>
    <dir>
    Messages
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
    Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
    (SQL Server Import and Export Wizard)
    Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
    - Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
    identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information
    about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
    (SQL Server Import and Export Wizard)
    </dir>
    </dir>
    Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4.  The component returned a failure code when the pipeline engine called PrimeOutput().
    The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Smash126

    Hi Smash126,
    Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
    autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
    To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
    The following document about Add Data or Log Files to a Database is for your reference:
    http://msdn.microsoft.com/en-us/library/ms189253.aspx
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Sync Error message reprocessing in MI server

    In MI 2.5 server, all sync error messages with staus I-Error need to be resolved manually and then reprocessed.
    Errors are generally data issues(Equipment type mismatch etc).
    In MI 7.1 , there are better data monitoring and administration capabilities. Is there a better automated way in MI 7.1 where by some of the I-Error status messages could be corrected and reprocessed based on some defined logic and rules.
    Thanks & Regards,
    Amandeep Aggarwal

    Hi,
    custom services plugged-in in the message flow can be used to correct the fields of the message during the processing.
    Since your requirement is to modify the message only incase of errors and during re-processing, the custom service has to be a little more intelligent than just modifying the data ..like reading from DOE monitoring data to figure out whether that message failed and is being re-started which is possible as far as i think.
    In tcode sdoe_wb on selection of your SCV.,expand the data object and inturn the flow definition tree. Choose the flow where you wish to add a custom service. Press create button in right panel. Give FM or class method. Save it and generate your data object.The message body and the message header is available as parameters in the custom service , there are some specific places where a write service could to be placed and so on..
    You can also refer the sample custom service SDOE_SAMPLE_CUSTOMSERVICE class shipped by SAP.
    To know more about custom services, check out this link : [custom services|http://help.sap.com/saphelp_nwmobile71/helpdata/en/6d/bf104d163849d1af313c492655e0f7/content.htm]
    Regards,
    Liji

  • Mail client using pure Sock programmin??

    Hello guys,
    I want to code a mail client like OutLook Express using pure Sockets.Not using JavaMail...or something like that.
    I think I should study about ESMTP protocol.
    Where should I start? where can I find good tutorials
    thanks

    I want to code a mail client like OutLook Express using pure Sockets.Not using JavaMail...or something like that.Why? What do you want to do which JavaMail does not do for you already?

  • The new ios software will download to my laptop but won't update on my phone, error message about network settings, any ideas?

    Hi there,
    the new iOS software (infact any new software for iPhone 4) will download to my laptop but won't update on my phone. I get an error message about network settings and to check if they are correct. Does anyone have any ideas? This is beginning to break me :-(
    Regards
    ellenfromnew

    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch
    Make sure you have the Latest Version of iTunes Installed
    iTunes 10.7 or later (free download from www.itunes.com/download

  • Getting an error message about UID:  Unowned UIDs for ImageFrame   CANNOT SAVE FILE

    Getting an error message about UID:  Unowned UIDs for ImageFrame   CANNOT SAVE FILE

    Hi,
    Could you please share your .muse file with us to investigate? Please email it to [email protected] If your file is greater than 20MB you can use something like Adobe SendNow or SendThisFile or Dropbox. Please do not forget to mention the link to this forum thread in your e-mail so that we can identify the file.
    Regards
    Vivek

  • How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

    How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

    Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
    If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
    you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

  • Why do I get an error message saying unable to use disk when creating a DVD

    I have successfully burned two DVD's of a group of three I am burning of my last vacation pictures. I have successfully created WMV files for each day of the trip which I have combined to create the three DVD's so they won't be too lengthy. I created a menu with main menu and stop menu markers. When I went to burn the third disk, which is the shortest of the group the program would encode to the 96% and then the disk would eject and it would give an errow message saying the disk was not compatable. This was the same type of DVD-RW disks I used on the two successful disks. I tried redoing the burn 3  times with each time getting to 96% on the encription and then the same error message occurred. I used fresh disks each time. On the forth try I cut the number of WMV files down to 3 to make the DVD half as long. The same thing happened at the 96th% spot of the encription process. Nothing had ever been put on the disks. I am using top quality Memorex DVD-RW disks. Please let me know what else I can do. I am very frustrated. Oh yes, I closed the program down each time I got the error and also shut down and restarted the computer afer each error. I really want to finish this project as I have been working on it now for two weeks non stop. Thank you.

    Good, that gets one possibility out of the way.
    Since the error about the disc indicates that the Transcoding has already finished, I think that we can probably rule out the next step, but let's look anyway.
    Now, for Transcoding to DVD, PrE uses 2-pass Encoding, so it would seem that this problem is comng right at the end of the second pass, at the end of the Timeline. Look very closely at that point, and see if there is anything odd there. Things like gaps in the Video of a Timeline, or sometimes Assets that are not proper, can cause Transcoding to stop. Anything there? [I think that with a disc error, Transcoding HAS completed, and the progress bar is just lagging slightly behind, but more questions are probably needed.]
    Last, what brand of blank media are you using? The reason that I ask this is that some companies, like Memorex, buy the cheapest disc that day, and rebrand them, so in a spindle of 25, you might end up with blank discs by different mfgrs., and some can be much better, than others.
    Good luck,
    Hunt

Maybe you are looking for