Sync microKorg with Logic Express 9

I'm trying to sync the arpeggiator of my microKorg XL with Logic Express 9, using Logic as the master. I seem to have almost done it, in that tempo changes in Logic change the microKorg's tempo. However, I can only hear the microKorg whilst I'm either recording or playing back - I can't hear it if I press a few keys.
I think the problem lies in that I have "Local off" set in accordance with the microKorg manual. The manual says I should also "turn on echo back" on the computer - but I don't know how to do this in Logic Express.
Grateful for advice.

When you set "Local Off" in any synth with MIDI capability, it disconnects synth's keyboard from its sound engine. Switch it back ON to be able to play sounds again using microKorg's keyboard. There is no point to disable the keyboard in your case anyways. Unless of course, you want to avoid midi-loop (but that's only when you have both MIDI IN and MIDI OUT wired to Logic).

Similar Messages

Syncing Fast Track Ultra (Slave) With Logic Express (Master)

I'm trying to get my fast track to slave with Logic Express, using Logic as the master. It doesn't appear to be sending out any messages. On my fast track I can get the midi 'in' light to blink but not the 'out.' in Logic, the transport bar on the bottom, says 'no midi' for both the in and the out. Does this sound like a Logic setup issue or a fast track ultra setup issue?

Hi,
1st: You need to set your drum machine clock to external. That's important if you want to make Logic the master. Be aware any clock signal only is available when Logic is in play mode (naturally, but sometimes i forget even the most logical things).
2nd: In the Audio-Midi-Setup, the Fast Track should be displayed. Open the MIDI window (Window-> show MIDI window). Click on the "add device" icon. A new device will be added (new external device). Now open the inspector for this new device. You can name it, adjust all these things like MIDI clock send/receive and other gizmos and give it a nice icon. Now you must "connect" this new device with you Fast track by simpy dragging a line from it's outputs to the Fast track input and vice versa. The MIDI setup window will now represent your hardware's cabeling.
Once you have done this correctly, you should be able to correctly select the Drum machine in Logic.
Fox

HT3423 My iMac came with logic Express 8 installed, how do I get it to work on my mac book pro

My iMac came with Logic Express 8 Pre installed. How do I get it to work on my Mac Book Pro

Along with your OS and applications installation DVDs, you should have gotten an LE8 installation DVD along with its manual and serial numbers when you bought your iMac.
Your license allows you to install LE8 on two computers as long as they are your computers, you are the sole user, and you do not run Logic on both simultaneously. So dig out your installation DVD, install it on your MacBook Pro and enter your serial number and you will be good to go.

What's the best controller keyboard to run with Logic Express?

I am a composer of mostly acoustic/classical music and was wondering about best user friendly controller keyboard for Logic Express. Does anyone have any recommendations? I am not a rocket scientist when it comes to working with connections, so I need something real easy in a 61 or 76 key synthesizer/controller. jack

Cant really answer thatqestion in terms of the "best to use" with logic express, however, im in the opposite postion as you in the sense that im using logic with a motif 6 and want to sell it, and just get a controller. I produce hip hop, and have always prefered the sounds in the triton to the ones in the motif.....fo waht im using it for at least.

Control surfaces with Logic Express

hello all
Im new to MAc , completely new having been PC since the year dot...Having used Cubase since atari days I have a Steinberg Houston Controller surface. Anyone know if it is possible to use it with Logic Express before I spend £150 on the programe please??

Hi,
nope, the surface wouldn't work natively on a Mac. You can only use it's MIDI features and remap the controls to functions in Logic. As long as the interface sends MIDI, this will work, but there won't be any access to the special features i guess. Guess why? Steinberg wouldn't want to provide a driver for another DAW than Cubase. Sneaky little ones they are...
But you can try to sell it through ebay.
Fox

Can I use MainStage 2 with Logic Express 9.1.6

Is it possible to use MainStage 2 with Logic Express 9.1.6.? Are there any limitations to not having Logic Pro 9. I'm very happy with LE9.1.6. as it meets all my needs (perhaps with the exception of not having Space Designer) but if I need to upgrade to get the most out of MainStage 2 then I will.
Thanks.

Actually I have found a way for at least the instrument plug ins to be accessed.
I was able to set up an instance of Sculpture in MS2 and record it in LE using Soundflower.
Route the audio from MainStage to Logic and record onto an audio track in Logic as follows:
If not already installed, get SoundFlower. After installing it.
A) Setup the sound you want in MS2 and audio output to Soundflower (remember to Apply Changes or it does not hold).
B) In Logic Express set the audio input to Soundflower and create a new audio track for recording. Important: set Soundflower's audio output to however you listen to your audio or you won't hear anything.
C) Press RECORD and start playing, LE captures Mainstage's sound.
I have not tried to wire LE's output to MS2 to take advantage of Space Designer. but since this functions, I'm not sure why that couldn't work as well. It is still flipping though a few screens though...might just be easier to get Logic Pro from the App store....

Set-up Roland Octapad 2 with Logic Express 8

Is anyone familiar with how to set up the Roland Octapad 2 Pad-80 with Logic Express 8. I want to use it as a midi controller for some drum samples I have (not general midi drums). But like Addictive Drums or BFD Lite. I have it connected with an edirol e-mux 1x1 interface. But when I hit the pads there is no response. I have it set up in the Audio Midi set up. Are there settings within the Octapad I need to change? I've spent two hours trying to get it to respond and it's becoming a pain in the arse.
Thanks for any help.

Logic has a built-in midi monitor in the transport bar. When you hit the pads, are you seeing notes listed there?
The Octapad's model was "pad-80", and there's a manual available on the web - http://www.scribd.com/doc/8356768/ Roland-Octapad-II-PAD80OM. If you're seeing midi notes show up and can't change the settings in Addictive Drums to match them, you're going to have to change the notes on the pad -- which will probably be more difficult than doing it in the software.

I have East/West Symphony. Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?

I have East/West Symphony.
Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?
Also, would it work with Garageband??

Thanks-that's the same driver I'm using now.
The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
Thanks very much for the response, it helps me get beyond this phase.
Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

Does mainstage work with logic express 9

hi , do all the features and plug-ins work with logic express 9 or are some features disabled .
or are they not compatible at all
thanks

I have just spoken to two supervisors and 4 underlings about this exact concern and they ABSOLUTELY REFUSE TO BUDGE in regard to a sidegrade or smaller upgrade fee. I have been a loyal Mac user, ****, an EVANGELIST since 1990, spent well over 100 grand on the apple products I needed and I tried being super polite, explained that I had barely had a chance to learn a thing about Express since I bought it in the store after realizing that there was no way I could afford the Logic Pro 9 box sitting next to it.
THE ANSWER IS IF YOU WANT THE NEW, CHEAPER VERSION OF LOGIC PRO 9 AND MAINSTAGE, YOU NEED TO TOSS OUT YOUR ALREADY CANCELLED LOGIC EXPRESS 9 DISKS, FORGET YOU BOUGHT THEM IF YOU CAN, AND, IF YOU WERE DOWNSIZED LIKE I WAS 3 YEARS AGO BECAUSE MY BACK GAVE OUT...
GO AHEAD. SEE IF YOU CAN KEEP YOURSELF FROM THROWING UP WHEN YOU HIT THAT PURCHASE BUTTON ON THE TWO PROGRAMS THEY REDUCED IN PRICE.
REMEMBER, THOUGH...IT IS NOT LOGIC STUDIO YOU ARE GETTING. THEY SPLIT THE BOX UP SO THE REMAINDER OF THE SOFTWARE IN IT WENT INTO FINAL CUT PRO. THE ORIGINAL BOX YOU CAN STILL GET FOR $500 UNTIL THEY SELL OUT.
DON'T SHOOT THE MESSENGER. THIS IS ONE ANGRY EX-EVANGELIST WHO NO LONGER HAS ANY REVERENCE LEFT FOR APPLE. I GUESS WHEN THEY LOST STEVE, THEY LOST TOO MUCH. SOMETHING IS VERY, VERY WRONG ABOUT THIS POLICY. SCREW THE PEOPLE WHO SPENT THE WHOLE AMOUNT, NOBODY AT APPLE REALLY CARES ABOUT ANYTHING EXCEPT WHAT IS LEFT IN YOUR WALLET.
SORRY FOR THE RANT, BUT I AM IN SHOCK AFTER THE LAST TWO HOURS OF TRYING TO GET THEM TO SEE HOW WRONG THIS POLICY IS.
WE HAVE BEEN SHAFTED, BIG TIME. IN THIS ECONOMY, THAT IS ONE HUGE INSULT IMHO.
GOOD LUCK EVERYONE.

How can I midi Roland TD-9 KX2 with Logic EXpress 9?

Hello everyone,
Here is my setup:
I have the Roland TD-9 KX2 connected to M-Audio MIDI In & Out and Audio 1/4" In & Out, Then connected to Logic 9 thru USB on my MacBook Pro.
I create a new track and select Audio and then I create another track and this time I choose External.
When I hit record, the audio track shows waveform recorded but the External/MIDI does not.
Note: When I'm recording, I can see the MIDI notes (look like little blocks), but when I stop recording, They disappear...
Can someone please tell me how I can execute this or of if anyone has a tutorial that they can share link of it.
Thanks in advance,

I had a simular problem. Only I had Ver 9 and needed 9.1.4 to be compatable with Lion. I had installed Lion and didn't think I would have any problem with Apple apps. Not the case with Logic Express. Here is what I did.
First: I removed all versions that were previously installed on my Mac Pro. Then using the latest (9.0) I reinstalled. Important. DO NOT TRY TO OPEN APP. Next: down load (free) version 9.1.4 and install. Once everything is closed and disks are removed. Start Logic Express 9.1.4 and guess what...if just works.
I believe some of the residual files were residing in my library some place and I didn't see them. Before I reinstalled I was recieving the message that I didn't have a qualifing version of Logic Express. This is when I had two versions 9.0.0 and 9.0.1. Someone said to remove the older version, I didn and nothing.
Do what I say above and you will be rewarded.
Good Luck

Bundled content with Logic Express?

As a current Garageband user looking to upgrade to Logic 8 in the not-too-distant future, I'm wondering what bundled content (ie Apple loops, instruments etc) the Logic Express version comes with.
I know that Logic Studio 8 comes with all the Jam Packs, and these aren't included with Logic Express. Even so, I'm wondering how Logic Express compares - does it still come with a decent amount of bundled loops, instruments etc (over and above what you get with Garageband) that a fledgling musician could use to get started?

Logic Express comes with a nice amount of instruments and effects (as per the above links from Wikipedia & Apple) and all of your GarageBand jam packs will be available to Logic Express, too. So, right out of the box, you've got a very respectable setup - much better than GarageBand. The sampled instruments are fantastic, as are the amp simulations, effects, etc. etc...plus, it's very intuitive and your learning curve will be minimal. You'll definitely be happy with the big move upwards!

Connecting Interface and recoding with Logic Express 9

Hi apologies if I've posted this in the wrong location. I need some help.
I have just bought an iMac (with Logic express 9) along with a focusrite saffire pro 14 sound interface.
i'm having difficulties getting a line in and out of the focusrite and into logic.
I currently have passive monitors plugged into an amp, which is then plugged into the headphone jack on the iMac, the focusrite is connected via firewire.
my mic is connected via xlr with phantom power into the focusrite, and my guitar (via an effect unit with built in pre-amp) is connected into the 1/4'' input. both signals are showing levels on the focusrite mixer software - but no sound. the only output from the sound interface is the firewire.
I can record, and play back in logic using my usb midi controller- USB direct into the iMac.
i've selected the focusrite as the driver in logic, also as the input device in system preferences on the iMac.
any ideas when I am doing wrong?
any help would be good
thanks
Chris

Hi,
there are some points where the big bear trap might have snapped onto your feet
First: You said you have selected the focusrite as the core audio input device in Logic. This is okay. But have you selected the correct inputs for the audio tracks you are recording to? You focusrite has 4 possible line inputs (1 and 2 are combined on the front in the middle of the XLR jacks, which are also inputs 1 and 2 for mics, and 3 and 4 are on the back).
When you connect a headphone to your focusrite, can you hear your mic or your guitar? (turn up the monitor volume as well as the headphones volume!)
Given you really have a good signal that goes into your focusrite, the same signal should be available in Logic *for the appropriate inputs* . It won't work if you have plugged your guitar into input 3 and have input 1 or 2 selected in the channelstrip's input selector tab.
Second: Given there's a signal coming into Logic, where does it go from there? The focusrite has 4 outputs, and you should connect your amp&speakers to them. If your amp&speakers are still connected to your iMac's headphone jack, you must select your Mac's "built in output" as the output device in Logic. The OS X preference pane has nothing to do with Logic's preferences. Don't confuse them.
Cheers,
Fox

Mac game loaded with logic express, now its asking me for license key

My macbook came loaded with logic express 3 years ago, been working completely fine. Until today, where upon opening it asks me for the registration key which, if I don't, will not allow me to use the program. I don't have a registration key because I didn't purchase the software separately, and why it is asking for it now (after 3 years of usage) is beyond me.
Thoughts?

You should have the key with your documentation & install disk. However, if you haven't got it with your MB, call apple support. They are the only ones who can help you.
Fox

Can Logic Pro 7 Plugins be used with Logic Express

Hello, does anyone know if you can use the instrument plugins in Logic Pro 7 with Logic Express.

The cool advanced features that are part of Logic Pro are embedded in the application and can't be used as plug-ins on other systems such as Express. For good reason, eh?

MicroKORG in Logic Express questions

Hey there!
I'm thinking of upgrading to Logic Express (from GB'11) within the next few months, and I just had a couple of questions as I also would like to purchase a MicroKORG in the near future as well.
From what I've read the MicroKORG sends audio signal via the 1/4 inch connection- so that'd just be a Real Audio track, right? If I wanted MIDI it'd need a MIDI cable, yeah?
But- what if I love the sounds on the synth, but want to be able to tweak and edit a recording (bum notes, timing issues etc)? Is there not an official plugin instead or...?
Does the MicroKORG COME with a plugin? I've looked everywhere and can't figure it out
Thanks in advance

Q1- 1 gig of RAM is the minimum amount if you want to be safe. RAM is golden in Logic, but 1 gig is just safe.
Q2-I don't even see EXS24 on my copy, so there can't be a huge difference.
Q3- Yes, they should be but put that question in the logic PRO forum just to be sure.

Sync microKorg with Logic Express 9

Similar Messages

Maybe you are looking for