Sync problem after update

I installed the iTunes update and the 3.1 iPhone update. I had no problems with those at all. I then decided to sync my phone. My syncs usually only take a few minutes. My phone has been on "syncing iPhone" for at least an hour. It hasn't moved to backing up phone or anything.
I'm not sure whether to just let it continue or if there is something else I should do. The sync process is using nearly 100 percent of my cpu on the computer and I could barely get anything else open to get to this forum and type this message.
Any suggestions are welcome. Is anyone else having unusual syncing experience since the update? What will happen if it never progresses and I just need to unplug it? What will I need to do with the iPhone?
In my year of having the iPhone I've never had a sync problem before. Thanks for any help.

I just cancelled the sync by using the slider. I didn't realize I could do that. The phone seems fine. I may try it again and see what happens.

Similar Messages

New Outlook sync problem after update!!!

I had the 'original' Outlook sync problem, which went away after the iTunes update to 7.3.1, but now, after the iPhone update last night, I have an entirely NEW Outlook sync problem!!
When I sync the iPhone, right when it gets to the 'syncing contacts' part (that you see in the top box/window in iTunes) I get an error message that I haven't seen before. It says "AppleMobileDeviceHelper has encountered a problem and needs to close..." and it gives me the option to send an error report. I dismiss the error box, and the sync process hangs, and iTunes becomes unresponsive.
If I open Outlook, the two Apple sync oblects are still enabled, and get no error message. If I re-open iTunes and try to sync again, it only syncs iTunes content, and never even tries to sync my contacts or calendar.
Anyone having anything similar since last night? The only thing different is the iPhone firmware update.

I just cancelled the sync by using the slider. I didn't realize I could do that. The phone seems fine. I may try it again and see what happens.

Sync problem after update to Belle

Hi Nokia
I have updated my E7-00 to Belle yesterday and
now when I'm trying to restore my contacts,
calendar and notes from Ovi sync server I'm
getting error 'Service activation failed. Try again
later.' I've reed in this forum that the exact problem was
in August-September 2011, which was solved
only in early November by manipulating on Ovi
Servers. How can I restore my contacts now? Will be the
issue solved and how urgently?
Solved!
Go to Solution.

Some 2 months ago, I installed leaked Belle v.111.030.0607 on my N8 and everything worked fine including Ovi Sync.
2 days ago I updated to the official Belle version and the Ovi Sync failed to work with message: "Service activation failed. Try again later." The problem still persists now.
Can you believe it, leaked Belle version works better than the official version?
Quo vadis Nokia?

Sync problem after updating desktop software

Yesterday I updated my Blackberry Desktop Software to Version 7.0 Bundle 2404 and since then my Blackberry Torch 9810 will not sync properly - it keeps freezing and I have to reboot my computer to get out of it. What can I do? How can I go back to the older version which worked perfectly?
Thanks!

Read more here:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Installation-of-Blackberry-Desktop-So...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Syncing problem after updating software

every time this thing (iPod Touch V3)updates software it loose the calendar (Outlook) and the Outlook mail account (although I still get e-mail on the iPod (?)
Have had to restore the last 3 times I updated to get the Outlook calendar and mail recognized again.

It is the zoom feature and can be found in the manual:
http://support.apple.com/manuals/#ipodtouch

Anyone has any problem after updating to iSO 4.3.1 ?

anyone has any problem after updating to iSO 4.3.1 ?
I would like to know before updating mine.

My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
It you haven't already guessed, I'm more than a little ****** off.
If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
If its not right by the weekend I'm taking it back to the shop I bought it.

HT6147 Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem?

Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem? I lost my notes, calendar, songs, games+ more. I've tried everything to restore these, but it won't let me. HELP!!!!'

Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Photoshop CS2 problems after updating to 10.4.5.?

Anybody notice Photoshop CS problems after updating to 10.4.5.?

Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5)

My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?

I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this

Flash player problem after updating to belle on my...

flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz help or tell me the way to downgrade to anna
Attachments:
scr000002.jpg ‏10 KB

1) product code 059B7W0
2) software version 111.030.0609
3) it is actually stored .flv files on my phone workes fine on symbian anna
Attachments:
Scr000003.jpg ‏17 KB
Scr000004.jpg ‏15 KB

Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

Has your problem been solved by the updates??
Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
Microsoft Office 2011: version 14.2.3
Mountain Lion: 10.8.2 (12C60)

Sync problem after update

Similar Messages

Maybe you are looking for