Sync problems after switch from Windows to Mac; cannot read/write error msg

I'm not sure if this is a hardware or software issue.
I recently switched from a PC to a Mac. To move my iTunes files (50GB) I simply dragged and dropped them from my external HD to my new computer. I know that Apple does not recommend this process, but when I needed to move my library between drivers earlier this year, it was the only way I could do it without getting an error message that killed the process.
Moving the files seemed to be a success. Everything appeared in iTunes, I was able to play the music, etc.
I then tried synching my iPod (Classic 160 GB – I think 5th gen, it’s about 3 years old) on the new computer. I got some message that said you can only have one iPod per account and that I would have to wipe the iPod before syncing. I let it do that.
Here's where problems began:
With a few gigs to go in the sync I got a message that says something to the effect that iTunes cannot read or write to the iPod. Even though must of the library had been transferred to the iPod, before disconnecting the iPod iTunes wiped all but a few hundred megs worth of music from it. I've tried restoring the iPod a few times but that has had no effect. The first time I tried to sync the iPod it was formatted for Windows. I have reformatted it for Mac.
Also noteworthy is that the first 3/4ths of my library copies very quickly -- 1GB a minute -- but then it eventually slows down to where 100 MB takes 10 minutes. It copies the files in a different order every time, so it doesn't look like it's getting hung up on the same files every time.
In case I had a corrupted file, I deleted all the files added to the library since my last successful sync.
Suggestions?
Should I just go to the nearest Apple store and beg for mercy?

Hi!
same problem here.I can use around 30G of my iPod Classic 160G.If i try to upload more than that it will take very long time and finally freezes.
Have no idea what to do..

Similar Messages

Problems with switch from Windows to Mac

I recently switched from Windows PC to a new Mac and cannot install the Acrobat 7.0 Professional CD that I used with Windows on the Mac. Am I missing something, or do I need to buy a whole new product?

No Windows program will install on Macintosh (a very few products have
both Windows and Macintosh on one disk, but not here).
If you call Adobe you can buy a "crossgrade" for a reduced price. You
will need to upgrade to Acrobat 9.0 at the same time.
Aandi Inston

Something running major after switching from Windows to Mac OS X. Any Ideas

I have been experiencing one issue when I transition from Windows back to Mac. It seems like the hard drive is being scanned or something big is running. It slows down Mac until it has finished doing what ever it is doing in about 20 minutes. I'm thinking that Mac is reclaiming space back or something, but it is doing it every time. How do I find out what is doing this and how do I stop it (if I can)? Is it something that will always happen? Did I set something in bootcamp that I can unset maybe?
Thank You for Your Help.

Finally figured out the problem on my own. My external hard drive was named <Mobile 2.5">. In this thread I read about others having a problem when their hdd was named in a comparable way (e.g. <storage for 21" iMac>).
I renamed my drive to <Mobile 2.5> and the problems are gone!

After switching from Windows to Mac, my iPod says "No Music"

I have an 80GB iPod Classic. I used to use a Windows machine, but recently switched to a MacBook Pro. Last night, I copied all of my music over to my Mac, and added some new stuff since I have more hard drive space now. I synced the iPod. All of the files are showing up in the iPod file browser within iTunes. So the media is there. However, when the device is ejected, the only media it says is available is photos. Meanwhile, it does say that I have used 68GB.
Although I have never had a problem with the device, I feared there could be a hardware issue, so I ran the onboard diagnostics. The results were:
For Retracts: 9
For Reallocs: 16
These numbers are low, so I don't think it's hard drive failure.
Do I need to do anything to reformat to Mac, other than what I did within iTunes?
Please help. I'm bored and need my iPod to work!
Thanks in advance.

Hi!
Make sure you authorize the new MacBook iTunes first, and you're good to go, no need to reformat! Hope this helps!
Sandygirl

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.
I am currently using Photoshop Elements 8 on Windows 7. After several years of use, I am self taught and adequately proficient for an amateur. What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing.
Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust. Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom. Frankly, I'm thinking that it would be smoother to stay within the Apple product line.
So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies). But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
- If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?
- if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?
- Can it splice together several separate photos to give a panoramic?
If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).
Thanks in advance for your consideration and help!

I am concerned, however, about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
Thanks for any insight on this
Amy,
Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

IPod classic - switching from Windows to Mac

I have an iPod classic and am switching from Windows to Mac - what's the best way to retain my iPod library? Thanks!

If you just want to connect and use the iPod on the Mac then set it to manual update on your PC first. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
Using iPod with Multiple computers
Managing content manually on iPod and iPhone
Syncing Music to iPod
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod
Macs can read Windows drives, the iPod shuffle for instance comes Windows formatted and is fully supported (you can update the firmware or restore it on the Mac and it retains it's Windows formatting). Other iPods (such as a 5th Generation or Classic for example) can be used in Windows format on a Mac but have to have the firmware updated or be restored on a PC to maintain the formatting. If however you don't intend using the iPod on a PC again you'll need to transfer your library from your PC so you can restore and reformat the iPod and keep it's firmware updated.
Once you are safely connected there are a few things you can do to restore your new iTunes directly from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
Senuti Mac Only (Currently only the beta version is iPod Touch & iPhone compatible)
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
TuneAid Mac only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPod Music Liberator Mac & Windows
iGadget Mac & Windows (iPhone and iPod Touch compatible)
Floola Mac & Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide

Switching from Windows to Mac. Is it worth it? Please help!

Hey everybody,
I think I finally made my decision to switch from windows to Mac,..the I-book. G4 (not the power book). The I-book I want is around 1299.00, with the wider screen,..than the smaller i-book.
Anyhow,.what led me to this decision was just sending back the Sony FS series. It was sleek beautiful and"white" like I love,..but the speakers were awful. I have just about given up on trying to find a decent notebook. I love the look of the i-book,..but cant get that gorgeous wide screen from Sony out of my mind. It was more than the speakers. Just too noisy. Anyway...if you bought this i-book all over again,..would you? Alos I have a brand new Linskys Router with the built in Security. Would the Macs intergrated wireless card,..work with my router?
Please help!
Lil
planning on getting this notebook. Need advice

I'm afraid you're not exactly going to get an unbiased opinion here
As a long-time Mac fan (back since System 6) who was forced into a PC world man years ago, OSX has re-kindled my passion for computing. I'm an old Unix guy and OSX has combined the best PC operating system with the power of Unix. To the average user who doesn't care about shell scripts and porting free applications, what you'll get from Unix is a tremendous amount of reliability and security...
One of the best reasons for anyone to switch to the Mac was summed up in a post over on iLounge as a reply to someone who was switching. When asked why anyone would switch, one reply simply said, "...because he realises that a computer should be a productivity tool, not a virus scanner."
In the year since I've bought my Mac Mini, the only failure I've had has been a crash of Virtual PC (an emulator that will allow you to run your old Windows-based applications), which took the virtual disk out and forced me to reinstall my Windows environment. That's nothing different than I've experienced countless times on my old PC.
That said, I'm looking at a 12" iBook. I didn't even consider the 14" because I don't want something larger that doesn't give me extra screen real-estate. I debated the 15" Powerbook but decided I don't really need it's larger screen, and I'd rather have something more portable. There are companies out there that sell dual-layer DVD-RW drives that can be installed in an iBook (even the 12" Powerbook only ships with a single-layer DVD burner).
512mb should be plenty, unless you plan on editing video or running Virtual PC--in which case, I'd recommend at least a gig.
Mini Mac OS X (10.4.3) 12" iBook + 2.3ghz Powermac on the way! Former Newton OMP user.

How do I switch from Windows to mac?

How do I switch from Windows to mac on a macmini?

Hi,
I assume you are talking about a BootCamp Windows, right ?
If so, usually you hold down the Alt/Option-key at startup of your Mac to get the Boot Selection screen.
There you can choose which Operating System to boot into.
Once in OSX you might wanna go to System Preferences - Startup Volume and set your OSX to be the default.
Regards
Stefan

My macbook pro out of screen when i switch from windows to mac

my macbook pro out of screen when i switch from windows to mac , mac is running but out of screen , what should i do??

my macbook pro out of screen when i switch from windows to mac , mac is running but out of screen , what should i do??

Ipod Switch from Windows to Mac: Possible?

Hi, I'm new here. If this has been asked, I couldn't find it.
I just bought a Macbook Pro; first Apple computer I've owned.
My iTunes library is on my IBM. Is it possible to get my songs into my Apple and then reformat the iPod and reload them?
thanks.
Regards,
Mark

You can use your iPod which will work on your Mac, there are a number of third party utilities that you can use to retrieve the files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. I use Senuti but have a look at the others and go with whichever you prefer.
Senuti Mac Only
iPodRip Mac Only
PodWorks Mac Only
iPod.iTunes Mac Only
iPod Access Mac and Windows Versions
YamiPod Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
Another way of course would be to network the two computers and copy over your iTunes folder. There is a good general guide to switching from Windows to Mac at the following link that touches on moving music as well How to Move to a Mac - Get your stuff from your PC to your new Mac
There are also these guides:
How to move music between authorised computers
Moving your iTunes Music Folder This is written around moving to another drive on your computer but should adaptable for moving to another computer ok and also Networking with a Windows PC
Don't forget by the way if you have purchased any tracks from the iTunes Music Store to deauthorise your old PC if you are disposing of it so you don't use up your 5 allowances How to move music between authorised computers

Switched from Windows to Mac, How do you change genre info

Hello, like the title says, I switched from Windows to Mac. I purchased the Mac Mini and when I import my movie files from my external hard drive into iTunes, not all are labeled correctly and in the right genre. I want to change the genre and add the cover art but iTunes is coming up gray and will not allow me to change. How can I do this?

kcuculich wrote:
Hello, like the title says, I switched from Windows to Mac. I purchased the Mac Mini and when I import my movie files
Don't import anything.
Copy the entire /Music/iTunes/ folder from old comptuer to /Music/ on new computer.
This is all you need to do to copy iTunes.
Everything in iTunes will be exactly as it was on other computer.

Switching From Windows To Mac: ACR Database, Bridge Cache Questions

I am planning to switch from Windows XP to the Mac running Leopard. I am now running CS2 in Windows, but will upgrade to CS3 on the Mac. I am maintaining my RAW file settings in ACR central database and my Bridge cache in a centralized cache file. I've searched the forums but couldn't find answers to my migration questions: 1. Can one move the ACR database file from Windows (in folder C:\Documents and Settings\<username>\Application Data\Adobe\CameraRaw) to a folder somewhere on the Mac to preserve the settings on RAW files that are also moved to the Mac? Or does one need to export individual XMP files for the RAW files in Windows and move both the RAW files and their associated XMP files to the Mac? 2. I have a similar question for migrating the Bridge cache from Windows XP to the Mac. Can one somehow move the Bridge cache over (I think it's in C:\Documents and Settings\<username>\Application Data\Adobe\Bridge\Cache\Thumbnails\) or do I need to export the cache for each folder and subfolder and move them over along with the folders and subfolders? I would appreciate any help or pointers to any Adobe documents or directions. Thank you.

Man-Kong,
Since you said that you were also migrating from CS2 to CS3 I would have said that their cache files were incompatible. That is what I experienced with CS1, CS2, and CS3 in the past. But Thomas indicated it should work. I must be missing something.
The XMP files move fine for me. The local cache (folder) files have completely different names with each version and I see no evidence that they can be shared. This is also a problem with archived CDs. CS3 always has to rebuild cache if they were archived from CS1 or CS2.
Since the central cache must have some folder references, and this structure will be completely different on Mac, I dont see how it can work. It doesnt work for scripts or actions either.
So my humble recommendation is to set your preferences to store cache and XMP files in the local folders where possible. Then simply bite the bullet. Each time you visit a folder for the first time in the new environment, cache will be rebuilt.
Cheers, Rags :-)

Switching from Windows to Mac - Drive Compatibility

I'm finally getting back to Mac after a 15 year break using Windows.
My question relates to all my existing files. I have an external drive that I store all of my data on. It includes my ITUNES files, my photos etc. The drive actually hangs off of my Airport Extreme N Router.
When I get my MAC, will I be able to access those files? Will this be read/write? Even if it is just once so that I can copy them off of my external drive and onto my new Mac harddrive? Sorry, being in the Windows world I'm hung up on always thinking that things are incompatible. Is the drive formatted in a way that I can access?
I plan to use Boot Camp and/or Parellels as well - a couple of nagging work applications with no Mac version. When running Windows, will I still be able to access files from that drive as well? For instance, if I continue to run Windows Office while in the Windows environment, can I read/write files to that drive still without disturbing files that the Mac OS and applications will be accessing? Or will the drive be eitehr pure "windows or mac" ?
I'd still like the external drive to be accessable from the other Windows machine in the house as well until I switch that one out....can that happen?
What about my Apple TV which I haven't installed yet. Will it be able to access my photo files, etc. on this drive?
This is my last hold up to switching. I just dont want to dive in and find myself without any of my old data.
I know the answer is probably easier to explain than I'm asking. I just can't get my head wrapped around this for some reason. Thanks in advance.
Summary:
One Windows Machine that uses External Drive for all data storage - replacing with Mac
One Windows Machine that uses External Drive for backups
External Drive hanging off of AEN router.
Apple TV - to be installed

Hello Atlantax,
I can't answer all of your questions, but some.
my photos etc.
Yes. As you know, all files are associated in Windows by their extension. With OS X, the Mac is also now like this. Though it does double up with the older Type/Creator codes of OS 9 and earlier. So all you your .jpg, .tif, .eps, .ai and other formats will all be easily recognized by your Mac counterpart applications like Photoshop, Illustrator, Quark, etc.
Not that it will be perfect. On the Mac, while all .eps files for example, like Windows, have the same extension no matter which app created them, the Mac also assigns Type/Creator codes to each file so it knows which app it belongs to. So unlike Windows, which can have .eps assigned to only one application (meaning an Illustrator .eps will try to open in Photoshop if that's the app the .eps extension is assigned to), this doesn't happen on the Mac. An .eps created in Photoshop will open in Photoshop, Illustrator in Illustrator, etc., when you double click on them.
But you will have an issue with the files you copy over since they will have no Type/Creator codes. As will .jpg, .tif and all other image formats. If there's more than one app that can open them, you'll have the same issue with those older files as you do in Windows. They will simply try to open in the whatever the default app is in the LaunchServices database.
You could get around this somewhat by assigning a Photoshop .eps to Photoshop. But then OS X will behave just like Windows and try to open all .eps files in Photoshop, ignoring the Type/Creator codes.
Will this be read/write?
If it's FAT16 or FAT32, it will be read/write. If it's NTFS, it will be read only.
When running Windows, will I still be able to access files from that drive as well?
Yes. It would be best to have the external formatted as FAT32 so both the Mac and Windows can access it natively. What the Mac will do in that case is copy two files to the external drive for each item you copy over. Say the name of the file is KittyCat.tif. It will put these two files on the external drive:
KittyCat.tif
._KittyCat.tif
Since the second file starts with a period, it will be invisible in OS X. But it's important because it holds the resource fork information of a Mac drive that can't normally exist on a FAT32 drive. So when you copy it back, OS X will automatically rejoin the data fork information (visible file) with the resource fork information (Type/Creator codes, time stamps, etc.). You'll see those ._xxx files from within Windows, so don't just start deleting them. Either that, or use OS X's Disk Utility to partition the drive into two parts. One as Mac OS Extended (HFS+), and the other as FAT32. Then save your files on each partition as per the OS they belong to.
I'd still like the external drive to be accessible from the other Windows machine in the house as well until I switch that one out....can that happen?
Yes, if it's FAT32, or split into separate Mac/Windows partitions as described above. Unless you've got MacOpener on your Windows machine, it simply won't access the Mac formatted partition. NTFS will also work, but you'll only be able to read from the Mac.
Also, as Gnarlodious mentions, the Mac will let you use some characters in file names that Windows doesn't allow. I'm sure you're already aware of these, but here's a list anyway.
These are all characters reserved by the system in DOS.
? [ ] / \ = + : ; " , * |
In the Windows Joliet file system, these characters are not allowed.
? / \ : " * |
Hope this helps.

How to setup photo structure after switch from Windows?

Hi Colleagues,
Have changed all computers at home from Windows into Mac. As a result have new Air and Pro Retina plus NAS system by Qnap.
WIth windows was having a regular photo file structure that was stored on NAS. This "library" has approximately 100GB and is manually structured in folders that represent events. So far was downloading pics to Win computer, making some adjustments, cleaning and only then moving them to NAS.
Now what is the best practice to organize such files with Mac and iPhoto provided that I would like to have access to this database from both MAC's. How to go forward with current taken pics? Where to import them, store, etc?
Look forward for your advices.
Adam

Picasa - you mean the google app and storage?
Was using it for sharing pics, but it had limited space.
There is a Picasa photo manager for the Mac - it is from Google but it is not th eonline version (although it integrates to that) - it is local to your mac - You will have to seperately research its abilities and if it will meed your needs
NAS gave me same options so was not utilizing picasa for a long time.
OK - but you can not use your NAS for their iPhoto library so people are suggesting alternatives
Regarding file structure need to explore if I can change it on NAS.
You can not - a NAS is not a disk drive - it is a headless computer and it has its own file system that can not be changed -
You either need to change what you want to do and use iPhoto the way it works or change the software you use to a system that will work with your NAS
Once again You can not use either iPhoto nor Aperture with their libraries on a NAS
You could use Aperture in a referenced mode with the original photos on the NAS and all of the edits, changes, etc on your mac
You can use other programs - Picassa is a potential - and a Digital Asset Manager (DAM) discussion site will have others - there are soem that work fine with a NAS
LN

First sync after moving from windows to mac

Hi,
I just decided that I'm fed up with reinstalling and bought a new iMac (OS X). I've found a lot of posts about moving iTunes and music. But Im still afraid to do the first sync.
What I want to know is what will happen with my contacts and callender?
On the old comp I used to sync the iPhone with outlook.
If I sync now with the new library on the mac, will all my contacts and callender be deleted? Or will they be copied from iPhone to mac?
I also have the old iTunes library on an external hard drive. Is that any help?

If you haven't transferred contacts and calendar events from Outlook on your PC to the Address Book and iCal on your Mac and you don't plan on doing so, before syncing this data on your Mac, enter one unique contact in the Address Book and one unique calendar event in iCal on your Mac. Make this up if needed, which can be deleted later. This will provide a merge prompt with the first sync of this data, which you want to select.

Sync problems after switch from Windows to Mac; cannot read/write error msg

Similar Messages

Maybe you are looking for