Sync problems - tracks dropping off when adding new o
Has anyone encountered a problem with Zen 8Gb players adding new tracks? I've noticed a couple of times when adding new tracks that some of the tracks that were already on the player have disappeared? Any ideas as to why this happens and how I can avoid it's
Cheers
Check the settings for the sync. Is it set to delete old ones to make room for new tracks?
Similar Messages
-
TableSorter errors when adding new data
so here is the deal:
I am using the TableSorter.java helper class with DefaultTableModel
from: http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
It works great when the data is static and I get it for the first time. however, occationally, when adding new data I get a NullPointerException error.
in use:
DefaultTableModel.addRow()
DefaultTableModel.removeRow() and
DefaultTableModel.insertRow() methods.
Error:
java.lang.ArrayIndexOutOfBoundsException: 5
at com.shared.model.TableSorter.modelIndex(TableSorter.java:294)
at com.shared.model.TableSorter.getValueAt(TableSorter.java:340)
at javax.swing.JTable.getValueAt(Unknown Source)
at javax.swing.JTable.prepareRenderer(Unknown Source)...
code problem I:
public Object getValueAt(int row, int column)
return tableModel.getValueAt(modelIndex(row), column);
}code problem II:
public int modelIndex(int viewIndex)
return getViewToModel()[viewIndex].modelIndex;
}TableSroter class:
package com.shared.model;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.util.List;
import javax.swing.*;
import javax.swing.event.TableModelEvent;
import javax.swing.event.TableModelListener;
import javax.swing.table.*;
* TableSorter is a decorator for TableModels; adding sorting
* functionality to a supplied TableModel. TableSorter does
* not store or copy the data in its TableModel; instead it maintains
* a map from the row indexes of the view to the row indexes of the
* model. As requests are made of the sorter (like getValueAt(row, col))
* they are passed to the underlying model after the row numbers
* have been translated via the internal mapping array. This way,
* the TableSorter appears to hold another copy of the table
* with the rows in a different order.
* <p/>
* TableSorter registers itself as a listener to the underlying model,
* just as the JTable itself would. Events recieved from the model
* are examined, sometimes manipulated (typically widened), and then
* passed on to the TableSorter's listeners (typically the JTable).
* If a change to the model has invalidated the order of TableSorter's
* rows, a note of this is made and the sorter will resort the
* rows the next time a value is requested.
* <p/>
* When the tableHeader property is set, either by using the
* setTableHeader() method or the two argument constructor, the
* table header may be used as a complete UI for TableSorter.
* The default renderer of the tableHeader is decorated with a renderer
* that indicates the sorting status of each column. In addition,
* a mouse listener is installed with the following behavior:
* <ul>
* <li>
* Mouse-click: Clears the sorting status of all other columns
* and advances the sorting status of that column through three
* values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to
* NOT_SORTED again).
* <li>
* SHIFT-mouse-click: Clears the sorting status of all other columns
* and cycles the sorting status of the column through the same
* three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
* <li>
* CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except
* that the changes to the column do not cancel the statuses of columns
* that are already sorting - giving a way to initiate a compound
* sort.
* </ul>
* <p/>
* This is a long overdue rewrite of a class of the same name that
* first appeared in the swing table demos in 1997.
* @author Philip Milne
* @author Brendon McLean
* @author Dan van Enckevort
* @author Parwinder Sekhon
* @version 2.0 02/27/04
public class TableSorter extends AbstractTableModel
protected TableModel tableModel;
public static final int DESCENDING = -1;
public static final int NOT_SORTED = 0;
public static final int ASCENDING = 1;
private static Directive EMPTY_DIRECTIVE = new Directive(-1, NOT_SORTED);
public static final Comparator COMPARABLE_COMAPRATOR = new Comparator()
public int compare(Object o1, Object o2)
return ((Comparable) o1).compareTo(o2);
public static final Comparator LEXICAL_COMPARATOR = new Comparator()
public int compare(Object o1, Object o2)
return o1.toString().compareTo(o2.toString());
private Row[] viewToModel;
private int[] modelToView;
private JTableHeader tableHeader;
private MouseListener mouseListener;
private TableModelListener tableModelListener;
private Map columnComparators = new HashMap();
private List sortingColumns = new ArrayList();
public TableSorter()
this.mouseListener = new MouseHandler();
this.tableModelListener = new TableModelHandler();
public TableSorter(TableModel tableModel)
this();
setTableModel(tableModel);
public TableSorter(TableModel tableModel, JTableHeader tableHeader)
this();
setTableHeader(tableHeader);
setTableModel(tableModel);
private void clearSortingState()
viewToModel = null;
modelToView = null;
public TableModel getTableModel()
return tableModel;
public void setTableModel(TableModel tableModel)
if (this.tableModel != null)
this.tableModel.removeTableModelListener(tableModelListener);
this.tableModel = tableModel;
if (this.tableModel != null)
this.tableModel.addTableModelListener(tableModelListener);
clearSortingState();
fireTableStructureChanged();
public JTableHeader getTableHeader()
return tableHeader;
public void setTableHeader(JTableHeader tableHeader)
if (this.tableHeader != null)
this.tableHeader.removeMouseListener(mouseListener);
TableCellRenderer defaultRenderer = this.tableHeader.getDefaultRenderer();
if (defaultRenderer instanceof SortableHeaderRenderer)
this.tableHeader.setDefaultRenderer(((SortableHeaderRenderer) defaultRenderer).tableCellRenderer);
this.tableHeader = tableHeader;
if (this.tableHeader != null)
this.tableHeader.addMouseListener(mouseListener);
this.tableHeader.setDefaultRenderer
new SortableHeaderRenderer(this.tableHeader.getDefaultRenderer())
public boolean isSorting()
return sortingColumns.size() != 0;
private Directive getDirective(int column)
for (int i = 0; i < sortingColumns.size(); i++)
Directive directive = (Directive)sortingColumns.get(i);
if (directive.column == column)
return directive;
return EMPTY_DIRECTIVE;
public int getSortingStatus(int column)
return getDirective(column).direction;
private void sortingStatusChanged()
clearSortingState();
fireTableDataChanged();
if (tableHeader != null)
tableHeader.repaint();
public void setSortingStatus(int column, int status)
Directive directive = getDirective(column);
if (directive != EMPTY_DIRECTIVE)
sortingColumns.remove(directive);
if (status != NOT_SORTED)
sortingColumns.add(new Directive(column, status));
sortingStatusChanged();
protected Icon getHeaderRendererIcon(int column, int size)
Directive directive = getDirective(column);
if (directive == EMPTY_DIRECTIVE)
return null;
return new Arrow(directive.direction == DESCENDING, size, sortingColumns.indexOf(directive));
private void cancelSorting()
sortingColumns.clear();
sortingStatusChanged();
public void setColumnComparator(Class type, Comparator comparator)
if (comparator == null)
columnComparators.remove(type);
else
columnComparators.put(type, comparator);
protected Comparator getComparator(int column)
Class columnType = tableModel.getColumnClass(column);
Comparator comparator = (Comparator) columnComparators.get(columnType);
if (comparator != null)
return comparator;
if (Comparable.class.isAssignableFrom(columnType))
return COMPARABLE_COMAPRATOR;
return LEXICAL_COMPARATOR;
private Row[] getViewToModel()
if (viewToModel == null)
int tableModelRowCount = tableModel.getRowCount();
viewToModel = new Row[tableModelRowCount];
for (int row = 0; row < tableModelRowCount; row++)
viewToModel[row] = new Row(row);
if (isSorting())
Arrays.sort(viewToModel);
return viewToModel;
public int modelIndex(int viewIndex)
return getViewToModel()[viewIndex].modelIndex;
private int[] getModelToView()
if (modelToView == null)
int n = getViewToModel().length;
modelToView = new int[n];
for (int i = 0; i < n; i++)
modelToView[modelIndex(i)] = i;
return modelToView;
// TableModel interface methods
public int getRowCount()
return (tableModel == null) ? 0 : tableModel.getRowCount();
public int getColumnCount()
return (tableModel == null) ? 0 : tableModel.getColumnCount();
public String getColumnName(int column)
return tableModel.getColumnName(column);
public Class getColumnClass(int column)
return tableModel.getColumnClass(column);
public boolean isCellEditable(int row, int column)
return tableModel.isCellEditable(modelIndex(row), column);
public Object getValueAt(int row, int column)
return tableModel.getValueAt(modelIndex(row), column);
public void setValueAt(Object aValue, int row, int column)
tableModel.setValueAt(aValue, modelIndex(row), column);
// Helper classes
private class Row implements Comparable
private int modelIndex;
public Row(int index)
this.modelIndex = index;
public int compareTo(Object o)
int row1 = modelIndex;
int row2 = ((Row) o).modelIndex;
for (Iterator it = sortingColumns.iterator(); it.hasNext();)
Directive directive = (Directive) it.next();
int column = directive.column;
Object o1 = tableModel.getValueAt(row1, column);
Object o2 = tableModel.getValueAt(row2, column);
int comparison = 0;
// Define null less than everything, except null.
if (o1 == null && o2 == null)
comparison = 0;
} else if (o1 == null)
comparison = -1;
} else if (o2 == null)
comparison = 1;
} else {
comparison = getComparator(column).compare(o1, o2);
if (comparison != 0)
return directive.direction == DESCENDING ? -comparison : comparison;
return 0;
private class TableModelHandler implements TableModelListener
public void tableChanged(TableModelEvent e)
// If we're not sorting by anything, just pass the event along.
if (!isSorting())
clearSortingState();
fireTableChanged(e);
return;
// If the table structure has changed, cancel the sorting; the
// sorting columns may have been either moved or deleted from
// the model.
if (e.getFirstRow() == TableModelEvent.HEADER_ROW)
cancelSorting();
fireTableChanged(e);
return;
// We can map a cell event through to the view without widening
// when the following conditions apply:
// a) all the changes are on one row (e.getFirstRow() == e.getLastRow()) and,
// b) all the changes are in one column (column != TableModelEvent.ALL_COLUMNS) and,
// c) we are not sorting on that column (getSortingStatus(column) == NOT_SORTED) and,
// d) a reverse lookup will not trigger a sort (modelToView != null)
// Note: INSERT and DELETE events fail this test as they have column == ALL_COLUMNS.
// The last check, for (modelToView != null) is to see if modelToView
// is already allocated. If we don't do this check; sorting can become
// a performance bottleneck for applications where cells
// change rapidly in different parts of the table. If cells
// change alternately in the sorting column and then outside of
// it this class can end up re-sorting on alternate cell updates -
// which can be a performance problem for large tables. The last
// clause avoids this problem.
int column = e.getColumn();
if (e.getFirstRow() == e.getLastRow()
&& column != TableModelEvent.ALL_COLUMNS
&& getSortingStatus(column) == NOT_SORTED
&& modelToView != null)
int viewIndex = getModelToView()[e.getFirstRow()];
fireTableChanged(new TableModelEvent(TableSorter.this,
viewIndex, viewIndex,
column, e.getType()));
return;
// Something has happened to the data that may have invalidated the row order.
clearSortingState();
fireTableDataChanged();
return;
private class MouseHandler extends MouseAdapter
public void mouseClicked(MouseEvent e)
JTableHeader h = (JTableHeader) e.getSource();
TableColumnModel columnModel = h.getColumnModel();
int viewColumn = columnModel.getColumnIndexAtX(e.getX());
int column = columnModel.getColumn(viewColumn).getModelIndex();
if (column != -1)
int status = getSortingStatus(column);
if (!e.isControlDown())
cancelSorting();
// Cycle the sorting states through {NOT_SORTED, ASCENDING, DESCENDING} or
// {NOT_SORTED, DESCENDING, ASCENDING} depending on whether shift is pressed.
status = status + (e.isShiftDown() ? -1 : 1);
status = (status + 4) % 3 - 1; // signed mod, returning {-1, 0, 1}
setSortingStatus(column, status);
private static class Arrow implements Icon
private boolean descending;
private int size;
private int priority;
public Arrow(boolean descending, int size, int priority)
this.descending = descending;
this.size = size;
this.priority = priority;
public void paintIcon(Component c, Graphics g, int x, int y)
Color color = c == null ? Color.GRAY : c.getBackground();
// In a compound sort, make each succesive triangle 20%
// smaller than the previous one.
int dx = (int)(size/2*Math.pow(0.8, priority));
int dy = descending ? dx : -dx;
// Align icon (roughly) with font baseline.
y = y + 5*size/6 + (descending ? -dy : 0);
int shift = descending ? 1 : -1;
g.translate(x, y);
// Right diagonal.
g.setColor(color.darker());
g.drawLine(dx / 2, dy, 0, 0);
g.drawLine(dx / 2, dy + shift, 0, shift);
// Left diagonal.
g.setColor(color.brighter());
g.drawLine(dx / 2, dy, dx, 0);
g.drawLine(dx / 2, dy + shift, dx, shift);
// Horizontal line.
if (descending) {
g.setColor(color.darker().darker());
} else {
g.setColor(color.brighter().brighter());
g.drawLine(dx, 0, 0, 0);
g.setColor(color);
g.translate(-x, -y);
public int getIconWidth()
return size;
public int getIconHeight()
return size;
private class SortableHeaderRenderer implements TableCellRenderer
private TableCellRenderer tableCellRenderer;
public SortableHeaderRenderer(TableCellRenderer tableCellRenderer)
this.tableCellRenderer = tableCellRenderer;
public Component getTableCellRendererComponent(JTable table,
Object value,
boolean isSelected,
boolean hasFocus,
int row,
int column)
Component c = tableCellRenderer.getTableCellRendererComponent(table,
value, isSelected, hasFocus, row, column);
if (c instanceof JLabel) {
JLabel l = (JLabel) c;
l.setHorizontalTextPosition(JLabel.LEFT);
int modelColumn = table.convertColumnIndexToModel(column);
l.setIcon(getHeaderRendererIcon(modelColumn, l.getFont().getSize()));
return c;
private static class Directive
private int column;
private int direction;
public Directive(int column, int direction)
this.column = column;
this.direction = direction;
}any input will be appreciated.
thanks
PeterThe code you posted doesn't help us at all. Its just a duplicate of the code from the tutorial. The custom code is what you have written. For example do you update the TableModel from the Event Thread? Do you update the SortModel or the DefaultTableModel? If you actually provide your test code and somebody has already downloaded the sort classes, then maybe they will test your code against the classes. But I doubt if people will download the sort classes and create a test program just to see if they can duplicate your results (at least I know I'm not about to).
-
Sound drops off when using hdmi outport to connect computer to an AV reciever
Satellite M640,I5 2410 processor, windows 7HP. After about three minutes the sound drops off when connected to the av reciever through the hdmi outport. If I touch the trackpad the computer reconnects for another three minutes and then disconnects. If I touch the the trackpad about every two minutes the computer stays connected indefinetly. This problem does not occur if I use the computer to play an audio CD. Any fix suggestions.
Hi peter,
try to repair your permission by open application folder > utilities > disk utility > repair permission.
It should fixed the unexpectedly quit for several applications.
And try to get latest info from Griffin sites, maybe this one will help too:
http://www.griffintechnology.com/support/article.php?artnum=314
ps: why not try macbook built in microphone?
Good Luck. -
Full server pool crashes when adding new iSCSI server
Hi,
we have a Pool Group with 2 machines (1 Server Pool Master + Server Virtual Machine + Utility Server and another 1 Server Virtual Machine). Both have a iSCSI Shared Disk which builds /OVS partition.
This is working, we can use High Availability, Migrate guests etc.
But when adding new Server Virtual Machines to the pool (with guests running), current machines in the Pools get restarted.
My question is, can server virtual machines be "hot added" to the pool group while guests are running?
Thanks and regards,
MarcHi,
hosts file seems to be correct.
Messages logs during the crash time are the following:
Node vmserver15 = Server Pool Master, Utility Master and Server Virtual Machine
Dec 10 12:40:02 vmserver15 kernel: vlan500: port 3(vif6.0) entering disabled state
Dec 10 12:40:02 vmserver15 kernel: device vif6.0 left promiscuous mode
Dec 10 12:40:02 vmserver15 kernel: type=1700 audit(1260445202.434:16): dev=vif6.0 prom=0 old_prom=256 auid=4294967295 ses=4294967295
Dec 10 12:40:02 vmserver15 kernel: vlan500: port 3(vif6.0) entering disabled state
Dec 10 12:40:02 vmserver15 kernel: loop10: dropped 10114 extents
Dec 10 12:40:03 vmserver15 udhcpc: udhcp client (v0.9.8) started
Dec 10 12:40:03 vmserver15 udhcpc: Lease of 193.109.175.25 obtained, lease time 172800
Dec 10 12:40:04 vmserver15 kernel: device vif7.0 entered promiscuous mode
Dec 10 12:40:04 vmserver15 kernel: type=1700 audit(1260445204.774:17): dev=vif7.0 prom=256 old_prom=0 auid=4294967295 ses=4294967295
Dec 10 12:40:04 vmserver15 kernel: vlan500: topology change detected, propagating
Dec 10 12:40:04 vmserver15 kernel: vlan500: port 3(vif7.0) entering forwarding state
Dec 10 12:40:05 vmserver15 kernel: loop10: fast redirect
Dec 10 12:40:06 vmserver15 kernel: blkback: ring-ref 770, event-channel 9, protocol 1 (x86_32-abi)
Dec 10 12:53:35 vmserver15 kernel: o2net: no longer connected to node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:36 vmserver15 kernel: (4989,0):o2hb_do_disk_heartbeat:776 ERROR: Device "sdb1": another node is heartbeating in our slot!
Dec 10 12:53:37 vmserver15 kernel: o2net: accepted connection from node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:38 vmserver15 kernel: (4989,0):o2hb_do_disk_heartbeat:776 ERROR: Device "sdb1": another node is heartbeating in our slot!
Dec 10 12:53:50 vmserver15 last message repeated 6 times
Dec 10 12:53:51 vmserver15 kernel: o2net: no longer connected to node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:52 vmserver15 kernel: (4989,0):o2hb_do_disk_heartbeat:776 ERROR: Device "sdb1": another node is heartbeating in our slot!
Dec 10 12:53:53 vmserver15 kernel: o2net: accepted connection from node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlm_send_remote_convert_request:393 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000001050c00000000: bad lockid+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_inode_lock_full:2064 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_inode_lock_atime:2193 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):__ocfs2_file_aio_read:2434 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlm_send_remote_convert_request:393 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000001050c00000000: bad lockid+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_inode_lock_full:2064 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_write_begin:1845 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_file_buffered_write:2016 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):__ocfs2_file_aio_write:2173 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):dlm_send_remote_convert_request:393 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000000020744c1370e: bad lockid+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_inode_lock_full:2064 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_reserve_suballoc_bits:449 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_reserve_cluster_bitmap_bits:682 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_local_alloc_reserve_for_window:930 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_local_alloc_slide_window:1063 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_reserve_local_alloc_bits:537 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):__ocfs2_reserve_clusters:725 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_lock_allocators:677 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_write_begin_nolock:1751 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_write_begin:1861 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_file_buffered_write:2016 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):__ocfs2_file_aio_write:2173 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: loop: Write error at byte offset 37644512256, length 4096.+
. <the above bold and cursive text is repetead few times>
Dec 10 12:58:29 vmserver15 kernel: (5638,3):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000001050c00000000: bad lockid
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_inode_lock_full:2064 ERROR: status = -22
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_write_begin:1845 ERROR: status = -22
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_file_buffered_write:2016 ERROR: status = -22
Dec 10 12:58:29 vmserver15 kernel: (5638,3):__ocfs2_file_aio_write:2173 ERROR: status = -22
Dec 10 13:01:16 vmserver15 syslogd 1.4.1: restart.
Node vmserver10: Virtual Server Machine
Dec 10 12:53:35 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:35 vmserver10 kernel: (5029,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 0
Dec 10 12:53:35 vmserver10 kernel: (20996,0):dlm_get_lock_resource:844 E3FE9E5767CA457FA697980EB637E93B:M000000000000000000022044c1370e: at least one node (0) to recover before lock mastery can begin
Dec 10 12:53:36 vmserver10 kernel: (5344,4):dlm_get_lock_resource:844 E3FE9E5767CA457FA697980EB637E93B:$RECOVERY: at least one node (0) to recover before lock mastery can begin
Dec 10 12:53:36 vmserver10 kernel: (5344,4):dlm_get_lock_resource:878 E3FE9E5767CA457FA697980EB637E93B: recovery map is not empty, but must master $RECOVERY lock now
Dec 10 12:53:36 vmserver10 kernel: (5344,4):dlm_do_recovery:524 (5344) Node 1 is the Recovery Master for the Dead Node 0 for Domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 12:53:36 vmserver10 kernel: (20996,0):ocfs2_replay_journal:1183 Recovering node 0 from slot 0 on device (8,17)
Dec 10 12:53:37 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:38 vmserver10 kernel: (8672,1):dlm_get_lock_resource:844 ovm:$RECOVERY: at least one node (0) to recover before lock mastery can begin
Dec 10 12:53:38 vmserver10 kernel: (8672,1):dlm_get_lock_resource:878 ovm: recovery map is not empty, but must master $RECOVERY lock now
Dec 10 12:53:38 vmserver10 kernel: (8672,1):dlm_do_recovery:524 (8672) Node 1 is the Recovery Master for the Dead Node 0 for Domain ovm
Dec 10 12:53:40 vmserver10 kernel: kjournald starting. Commit interval 5 seconds
Dec 10 12:53:51 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:53 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:53 vmserver10 kernel: (3761,0):dlm_convert_lock_handler:489 ERROR: did not find lock to convert on grant queue! cookie=0:92+
Dec 10 12:53:53 vmserver10 kernel: lockres: M000000000000000001050c0000000, owner=1, state=0+
Dec 10 12:53:53 vmserver10 kernel: last used: 0, refcnt: 3, on purge list: no+
Dec 10 12:53:53 vmserver10 kernel: on dirty list: no, on reco list: no, migrating pending: no+
Dec 10 12:53:53 vmserver10 kernel: inflight locks: 0, asts reserved: 0+
*Dec 10 12:53:53 vmserver10 kernel: refmap nodes: [ ], inflight=0*+
Dec 10 12:53:53 vmserver10 kernel: granted queue:+
Dec 10 12:53:53 vmserver10 kernel: type=5, conv=-1, node=1, cookie=1:243, ref=2, ast=(empty=y,pend=n), bast=(empty=y,pend=n), pending=(conv=n,lock=n,cancel=n,unlock=n)+
Dec 10 12:53:53 vmserver10 kernel: converting queue:+
Dec 10 12:53:53 vmserver10 kernel: blocked queue:+
. <the above bold and cursive text is repetead few times>
Dec 10 12:57:18 vmserver10 modprobe: FATAL: Module ocfs2_stackglue not found.
Dec 10 12:57:18 vmserver10 kernel: (3761,0):dlm_convert_lock_handler:489 ERROR: did not find lock to convert on grant queue! cookie=0:92+
Dec 10 12:57:18 vmserver10 kernel: lockres: M000000000000000001050c0000000, owner=1, state=0+
Dec 10 12:57:18 vmserver10 kernel: last used: 0, refcnt: 3, on purge list: no+
Dec 10 12:57:18 vmserver10 kernel: on dirty list: no, on reco list: no, migrating pending: no+
Dec 10 12:57:18 vmserver10 kernel: inflight locks: 0, asts reserved: 0+
*Dec 10 12:57:18 vmserver10 kernel: refmap nodes: [ ], inflight=0*+
Dec 10 12:57:18 vmserver10 kernel: granted queue:+
Dec 10 12:57:18 vmserver10 kernel: type=5, conv=-1, node=1, cookie=1:243, ref=2, ast=(empty=y,pend=n), bast=(empty=y,pend=n), pending=(conv=n,lock=n,cancel=n,unlock=n)+
Dec 10 12:57:18 vmserver10 kernel: converting queue:+
Dec 10 12:57:18 vmserver10 kernel: blocked queue:+
. <the above bold and cursive text is repetead few times>
Dec 10 12:58:32 vmserver10 kernel: (3761,0):dlm_unlock_lock_handler:511 ERROR: failed to find lock to unlock! cookie=0:1849
Dec 10 12:58:33 vmserver10 modprobe: FATAL: Module ocfs2_stackglue not found.
Dec 10 12:59:02 vmserver10 kernel: o2net: connection to node vmserver15.pic.es (num 0) at 193.109.174.115:7777 has been idle for 30.0 seconds, shutting it down.
Dec 10 12:59:02 vmserver10 kernel: (0,0):o2net_idle_timer:1503 here are some times that might help debug the situation: (tmr 1260446312.830107 now 1260446342.828243 dr 1260446312.830066 adv 1260446312.830319:1260446312.830320 func (b9f5fd13:506) 1260446312.830109:1260446312.830303)
Dec 10 12:59:02 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:59:32 vmserver10 kernel: (3761,0):o2net_connect_expired:1664 ERROR: no connection established with node 0 after 30.0 seconds, giving up and returning errors.
Dec 10 13:01:42 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 13:01:45 vmserver10 kernel: ocfs2_dlm: Node 0 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:01:45 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 0 1
Dec 10 13:01:51 vmserver10 kernel: o2net: accepted connection from node vmserver16.pic.es (num 2) at 193.109.174.116:7777
Dec 10 13:01:56 vmserver10 kernel: ocfs2_dlm: Node 2 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:01:56 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 0 1 2
Dec 10 13:09:05 vmserver10 modprobe: FATAL: Module ocfs2_stackglue not found.
Dec 10 13:16:45 vmserver10 kernel: o2net: connection to node vmserver16.pic.es (num 2) at 193.109.174.116:7777 has been idle for 30.0 seconds, shutting it down.
Dec 10 13:16:45 vmserver10 kernel: (0,0):o2net_idle_timer:1503 here are some times that might help debug the situation: (tmr 1260447375.655426 now 1260447405.655712 dr 1260447375.655413 adv 1260447375.655427:1260447375.655427 func (b9f5fd13:503) 1260446516.75600:1260446516.75608)
Dec 10 13:16:45 vmserver10 kernel: o2net: no longer connected to node vmserver16.pic.es (num 2) at 193.109.174.116:7777
Dec 10 13:17:15 vmserver10 kernel: (3761,0):o2net_connect_expired:1664 ERROR: no connection established with node 2 after 30.0 seconds, giving up and returning errors.
Dec 10 13:17:19 vmserver10 kernel: (5029,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 2
Dec 10 13:17:20 vmserver10 kernel: (3761,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 2
Dec 10 13:29:05 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 13:29:05 vmserver10 kernel: (5029,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 0
Dec 10 13:29:06 vmserver10 kernel: (5344,4):dlm_get_lock_resource:844 E3FE9E5767CA457FA697980EB637E93B:$RECOVERY: at least one node (0) to recover before lock mastery can begin
Dec 10 13:29:06 vmserver10 kernel: (5344,4):dlm_get_lock_resource:878 E3FE9E5767CA457FA697980EB637E93B: recovery map is not empty, but must master $RECOVERY lock now
Dec 10 13:29:06 vmserver10 kernel: (5344,4):dlm_do_recovery:524 (5344) Node 1 is the Recovery Master for the Dead Node 0 for Domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:29:06 vmserver10 kernel: (28412,0):ocfs2_replay_journal:1183 Recovering node 0 from slot 0 on device (8,17)
Dec 10 13:29:09 vmserver10 kernel: kjournald starting. Commit interval 5 seconds
Dec 10 13:29:16 vmserver10 kernel: o2net: accepted connection from node vmserver16.pic.es (num 2) at 193.109.174.116:7777
Dec 10 13:29:20 vmserver10 kernel: ocfs2_dlm: Node 2 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:29:20 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 1 2
Dec 10 13:32:08 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 13:32:11 vmserver10 kernel: ocfs2_dlm: Node 0 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:32:11 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 0 1 2
Dec 10 13:36:10 vmserver10 shutdown[28681]: shutting down for system reboot+
I will investigate what seems to be going on and post it here.
Thanks for your help.
Edited by: Marc Caubet on 11-Dec-2009 02:05
Edited by: Marc Caubet on 11-Dec-2009 02:07 -
Slideshow image resizing when adding new images
I am creating a series of slideshows on multiple pages. I created one slide show using the "basic" slideshow and resized it to the dimensions and settings I wanted. I have many pictures all of different proportion, therefore, I selected the "fill frame proportionally" so they would all fit the dimension I set. I wanted to use this first slideshow as a template for all of the rest. I added images to this first slideshow with no problems. All of my different sized images scaled or cropped to fit within the dimension I set. The problem comes in when I do two things: 1) When I add other images of different dimensions to this same slideshow gallery, they come smaller that the intended dimensions I set previous. I check the setting and it is still on "fill frame proportionally" similar to the first batch of pictures. 2) The second issue is when copy this slideshow as a template to other pages. When I try to replace or add to the slideshow gallery, the images come in cropped or smaller rather than filling the frame. Again, the settings are still the same from my very first slideshow that worked just as i intended.
I could resize all the images to all the same dimensions using another program like photoshop, but that is another step that is very tedious and it would seem that it should be something built into Muse.
Is there a way around this?. Am I doing something wrong? Or is this just one of those glitches that happens with Muse? I appreciate any help that I can get.
Thanks!Hi, I got it to work like this:
Using background colours in Photoshop so that all sizes are the same in pixels. Then manually adjusting thumbnails by double-clicking on them so that a red square appears.
Cheers,
Elsemiek
Op 26 dec. 2014, om 00:50 heeft MediaGraphics <[email protected]> het volgende geschreven:
slideshow image resizing when adding new images
created by MediaGraphics <https://forums.adobe.com/people/MediaGraphics> in Adobe Muse Bugs - View the full discussion <https://forums.adobe.com/message/7043933#7043933>
Hi there Elsemiekagain,
I had to fiddle around with my slide show to get it to work. That is, it worked at first, then went funky, and I had to fiddle. So much fiddling that I can't possibly know what actually made it start to work again.
And to some degree, this is the way that I find Muse to be in general. That it requires finessing to get it to work as expected. This adds a good deal of time to every development project, though I am getting better at this with practice and experience.
Most of it is not even things that could be easily put in words as instructions, as many are nanced. But in fairness, this version of Muse is a complete code re-write this year. So we do need to cut Adobe some slack, and give the team time to iron things out.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7043933#7043933 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7043933#7043933
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Muse Bugs by email <mailto:[email protected]ftware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 59>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>. -
Apple Raid dropping off when doing most data renders
Apple Raid, fully occupied, 3 TB is dropping off when doing renders. Unit is connected via fiber to Mac intel running FCP 7, OS 10.6. Problem has been going on a for a while. Drive will sometimes drop off, when no renders are occurring. Also, drive performance is slower. Although drives are striped all the way accross, front performance meters, do not operate together. Any thoughts as to what is not working?
When the disconnect happens, what does your system log report? Have you logged into Raid Admin and checked the device logs? What do they report?
-
Master detail refresh when adding new record
Guys,
Can't believe I need to ask this question ....but here we go
when adding new master record --> I want to refresh the detail record..... in my case old detail records stays as it is until i click the save button
for detail panelformlayout-->partial trigger--> i set the ids of master panelformlayout and newMasterrecord button..... but still it doesn't refresh the child record when new master record is being created.....
any thought will be greatly appreciatedIn application module it works fine......
Even on the page when i click next/previous button on masters it refreshes details information.
but when i click the button "create" it doesn't refreshes details...... (but when i save the information, i certainly see the updated details)
seems like there is some settings or binding i need to check but can't able to find one.....
any help is greatly appreciated -
Since the upgrade to IOS7, the default phone label when adding new contacts in my iPhone 5 is "Radio". Previously the default was "Mobile". It is a hassle as when my iPhone contacts are synched with Outlook via Exchange, the phone number I've entered on the iPhone doesn't show on the default Outlook view as it is a "Radio" number rather than a "Mobile", "Work", "Home", etc number. It is still stored both on the iPhone & in Outlook & I can still use the number to phone or SMS, it is just incorrectly labelled & hence the source of frustration.
Apple please return the default to "Mobile" or alternatively find a way we can alter the default ourselves to "Mobile" or "Home" etc.The following previous discussion may help: https://discussions.apple.com/message/23846793#23846793
-
Can iOS Numbers copy formulas when adding new rows?
iOS Numbers table add row is not copying previous cell formulas. Is this supported or not?
I have a table with lots of columns and all of them have formulas. When I click at the lower left of the table to add a row, none of the new cells have the formulas. I have to manually go through every column and copy the formulas to the new row.
This is not very practical if you're planning to use Numbers on the go with an iPad. In my case, I have to quickly get a new row ready as needed. I was hoping there is a preference setting somewhere like "copy formulas when adding new row".I had the same issue with the added twist that I wanted to reference the created cells in formulas in other sheets. This is what works for me:
I use a form to enter data. The referenced sheet is set up like this:
1 Name Date ServPayment SalesPayment Total
2 Week1 =sum (ServPayment,SalesPayment)
3 =sum (ServPayment,SalesPayment)
4 TotWeek1 =sum (Total2,Total3)
"Total" sums the 2 Payments, TotWeek1 sums the totals.
In the entry form I never add data to the empty line. In this example, I would start at "Week1" and tap the "+" to add a new form. This creates the line in the referenced sheet with my formulas. As I continue, I always start at the last entry I have made and tap "+".
When I create a line that does not have the formula on either side, I do not get the formula.
Hope this helps. -
Null Pointer Exception When Adding New Row on Table
Hello JheadStart Team
I have used detail group with table layout , when I am clicking on AddRow button on detail table , I encounter NulllPointer Exception . I have traced the code and fount that in JhsCollectionModel when adding new row following
condition occurs :
DCIteratorBinding ib = getRangeBinding().getIteratorBinding();
int rangeSize = ib.getRangeSize();
int rowsInRange = ib.getAllRowsInRange().length;
because getAllRowsInRange is Null then the error raise.
My JheadStart ver is 10.1.3.3.85 .
Detail Group with table layout setting is :
Use Table range=true
Show New Row at top=true
New Rows:empty
Show Add New Row Button :true
RegardsGiven the build you are using, I assume you are an Oracle employee.
Is this correct? if so, please post your question to the [email protected] mailing list.
Steven Davelaar,
JHeadstart team. -
How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??
Copy your ENTIRE iTunes FOLDER to an External Drive...
Full Details Here > http://support.apple.com/kb/HT1751
To Operate iTunes from the External Drive...
Start iTunes with the Option key held down and guide it to the new location of the library.
Be Sure the drive is Formatted Mac OS Extended (journaled)
Also... have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html -
ITunes music sync problem: "drag & drop" works; "Sync Music" doesn't?
I've been trying to sync a few new playlists of music to my iPhone 3GS with frustrating results.
I'm hoping someone can explain to me what I may be doing wrong.
In the past when I wanted to add new music to my iPhone I would use what I refer to as the "Sync Music" or Music tab method. I would rip the CD, create a new playlist for the album, plug in my iPhone, select it under the Devices list in iTunes then click on the Music tab up at the top of iTunes (I have "Sync Music" checked and "Selected playlists, artists, albums, and genres" checked. I would scroll down through the list of playlists, find the new playlist I created and check the box next to it and sync my phone to add the new music.
This has worked flawlessly for years. Until now.
The last three albums I have tried to add this way will not sync to my 3GS. The music will play perfectly on my MacBook in iTunes. I ripped the music the same way, created the playlists the same way, and I can even get as far as the list of playlists under the "Sync Music" check box in the Music tab. I can see the new playlists in this list, I check the boxes indicating I want to sync them to my phone, but when I click Apply and then Sync, the music never shows up on my iPhone.
I keep every new album I import in it's own playlist, so being able to select which playlists I want to sync to my phone is definitely the method I would prefer to use, but since it wasn't working I tried checking the box next to "Manually manage music and videos" on the Summary tab. This of course disables the Music tab and unchecks the box next to "Sync Music".
I'm not too familiar with using this method to manage my music library, so maybe someone can show me a better way to do this, but with the "Manually manage music and videos" box checked the only way I know to add music to my iPhone is to drag a playlist one at a time from my iTunes library to my phone in the devices list.
This is where I get confused. For some reason the new ablums I ripped, which I was unable to sync the way I am used to ("Sync Music" check box/Music tab method), can be dragged and dropped onto my phone and they are copied to the phone without a problem.
WHY!?
Why, am I able to sync these ablums using this tedious and clunky drag and drop method and yet I'm unable to copy them to my iPhone using my prefered "Sync Music" checkbox method?
If you have any idea why I'm experiencing these problems or if you have experienced a similar problem please let me know.
Thank you.This problem started last year when ios 8 was released. I think apple is trying to force users to buy music on iTunes store and that's why it's impossible to sync other music and also that's the reason why they haven't solved this serious problem. That's really disappoints me and i'm angry with apple because i have like 10 gb of music in mp3 and i can't sync music from iTunes to my iPhone.
-
ITunes now becomes non-responsive when adding new music
Hello.
For a few months now iTunes has gone from quick importing of new mp3 and m4a files from my desktop, down to very slow importing after a long pinwheel, and now finally the endless pinwheel whenever I add any files. (It can go on hours, and requires force quit). My collection is large (50k files / 1TB or so), and the media sits on an external hard drive, but I have tried creating a new library from scratch on the desktop (and internal hard drive) and I still get the same endless pinwheel when adding just a few new files. The only other clue I have is that when the importing slowness just started, a third party metatagging application I use (TuneUp) was not recognizing the newly imported files as having been imported by iTunes, whereas I did use iTunes to import.
I am loathe to create a new library altogether as I've done much editing within iTunes to my large collection. (See this article: iTunes: How to re-create your iTunes library and playlists - Apple Support)
I am using latest Yosemite version (10.10.2) on a 2011 Mac Mini with a recent SSD inside (iTunes worked fine after the SSD upgrade a year ago).
Thanks for any help!Start by removing "TuneUp." See whether there's an improvement.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software. -
Price drops off when vendor changes
Hi
While creating shopping cart, when the vendor is changed, the price is getting dropped off. The vendor is assigned to a contract item/product category.
Any clue on what could be the reason for this?
Regards
RajeevHi
We have faced similar issues in our previous SRM implementation.
Which sRM version are you using ?
Couple of rerasons can be possible here ->
1) Missing Authorization to the user roles (Employee / Approver or Manager / Buyer role). Are you using standard SAP roles or using Z roles in PFCG transaction ? Ask BASIS to help you out.
2) BADIs implemented incorrectly.
Mostly it is due to following BADIs ->
BBP_DOC_CHANGE_BADI
BBP_ITEM_CHANGE_BADI
BBP_APPEND_ITEM
BBP_DOC_CHECK_BADI
Check the logic again carefully.
3) Organization structure settings in PPOMA_BBP for the user (Approving limit / Spending limit attributes not mainteined correctly for the users)
Or
Alternatively, in the SU01 transaction for the particular user (Employee / Buyer / Manager), in the Personalization tab, the Approving limit / Spending limit attributes not mainteined correctly.
4) Try de-activating all the Custom BADI Implemenatations using SE19 Transaction, (Name of the BADI starting with Y or Z ). Teh ntry again creating a new shopping cart with the same steps.
5) Check for Sourcing and pricing conditions as well.
6) A problem during the PO transfer. Check if there is any logs in SLG1 under user WF-BATCH at the time of the po creation. You may find some more information or explaination.
<b>Please go through the following SAP OSS Notes, which definitely will help.</b>
<u>
Note 993214 - Simplified pricing: Price becoming Zero in Sourcing Cockpit
Note 744020 - Catalog price is lost if purchase order is changed
Note 991260
Note 975313 BBPSOCO01: Change of Price not reflected in SC data
Note 1034949 Wrong price in SC when a product has multiple conditions
Note 1027656 Simplified pricing:wrong price calculation in SC using prod.
Note 550071 FAQ: EBP - Shopping Cart
Note 1015317 Price for PO free text item transfered from SC not updated
Note 836774 Incorrect price after contract assignment in SC and PO
Note 550071
</u>
Incase it does not help, please raise an OSS message with SAP.
Do update me as well.
Regards
- Atul -
Interactive Report uncheck Filter when adding new filter
Is there any possibliity to uncheck all Filters which are already defined in a interactive report when a new filter will be created?
My first approach started by adding a dynamic action which is related to the search field:
event = key_down
jQuery Selector = #apexir_SEARCH
event Scope = live
The Action contains:
$('input:checkbox').attr('checked', false);
There are 2 problems at the moment:
1. When the user hits "go" or "enter" the checkbox are checked again when the result is shown
2. If a filter is defined where the search field is not used, it doesn't workHi Oliver,
too much hassle I think. You can try to hijack any POST message, analyze it, and if it's about p_widget_action=FILTER you'd stop the action and interfere with an AJAX call to APEX_UTIL.IR_FILTER or IR_RESET. After the AJAX request has returnd (synchronously), you can fire the original POST again which sets the new filter.
Hmm. Sounds to me like you'd better ask the client if he is willing to pay for that sort of convenience.
Greetings from Northern Germany,
Andreas
Maybe you are looking for
-
Error 53 - File not found when registering HFM adaptor for 11.1.2.1, 64 bit
We are having trouble registering the HFM adaptor (FM11X-G5-E-1005) in version 11.1.2.1 of FDM which sits on 64 bit windows 2008 R2. I have followed the procedure of the KM article KM 1211618.1 which essentially has you deleting the 32 bit COM+ appli
-
Hi. I finished the contract through which I got my iPhone (Orange UK) and I've waited three weeks to get a message from Apple to say the phone is unlocked so I can use it with another service. Anyone know a way of prodding them to get on with it so I
-
Data recovery from a disk that is unmounted
Here is my problem: disk utility had indicated that I had a couple of bad blocks in my start up disk and recommended that it be replaced. Since I already had a second internal hard drive with plenty of room on it, I simply installed OS 10.4 on the se
-
Albums not showing up correct on my iPad iOS 5.0
I have an origianl iPad with iOS 5 updated. Some of my music albums are showing up as two albums even though iTunes is showing them as one. How do I correct this. Keep in mind I have already selected all the songs in the albums and did a "Get Info" e
-
Turned on home sharing on two computers, but shared library isn't coming up.
Two computers have home sharing turned on with the same apple user name and id, but the library can't be viewed by the 2nd computer. Any ideas?